02-14
NEW MILWAUKEE HAMMER DRILL (Johnson VT) $250
![NEW MILWAUKEE HAMMER DRILL (Johnson VT) $250]()
Brand new 18v Milwaukee hammer drill/driver kit number 2611-24, never been used. bought to replace a lost drill and then found the old one. Comes with two red lithium batteries charger and hard case.
Location: Johnson VT
it's NOT ok to contact this poster with services or other commercial interests
02-14
Mac tech series toolbox (westminster) $2900
![Mac tech series toolbox (westminster) $2900]()
this box is brand new, it was used for about 2 weeks. it is 41" tall x 50 1/2" wide x 25" deep. it sells for $4100 brand new. I am selling the box because i found that i needed a larger box. CAll 802 463 1475 will only respond to phone calls.
Location: westminster
it's NOT ok to contact this poster with services or other commercial interests
02-14
2 BOSCH DRILLS (ESSEX JCT.) $15
![2 BOSCH DRILLS (ESSEX JCT.) $15]()
2 BOSCH BATTERY DRILLS AND CHARGER
DRILL 3615
DRILL B2310
AND CHARGER
15.00 OBO 578-6099
NO BATTERIES
Location: ESSEX JCT.
it's NOT ok to contact this poster with services or other commercial interests
02-14
Snowblower-Craftsman (Brandon,vt) $350
![Snowblower-Craftsman (Brandon,vt) $350]()
2010 Craftsman snowblower.11.5 HP Briggs N Stratton motor, electric start, 2 stage, 26 inch wide. Like new. $350 O/B/O. Call me @ 802-770-2727.
Location: Brandon,vt
it's NOT ok to contact this poster with services or other commercial interests
02-14
Torch Set (colchester) $350
![Torch Set (colchester) $350]()
I have a small oxy/acetylene set up that is in nearly new condition. Bought it in 2007 for 750. Includes tanks, hoses, regulators, Victor super-range set, face mask, manual, cart, etc. Barely used it and many of the torch and cutting parts are unused, email or call dave at 324-0350.
Location: colchester
it's NOT ok to contact this poster with services or other commercial interests
02-14
RIDGID JOBSITE TOOLBOX (Bennington) $75
![RIDGID JOBSITE TOOLBOX (Bennington) $75]()
Model 2048-09, 25 inches deep with 3 inch risers. No keys. Orange, well used.
Location: Bennington
it's NOT ok to contact this poster with services or other commercial interests
02-14
Myers SRM4 Sewer Pump (Lebanon, NH) $350
![Myers SRM4 Sewer Pump (Lebanon, NH) $350]()
I bought this pump by mistake for my effluent tank. It will pump 2in solids 95 GPM, 19ft head. It is brand new and cost 440.00. The store will not take it back so I am stuck with it.
My loss is your gain. Make an offer. 802-785-2766
Location: Lebanon, NH
it's NOT ok to contact this poster with services or other commercial interests
02-14
*N.I.B. - corded rotary tool compatible with dremel (North Burlington VT) $20
![*N.I.B. - corded rotary tool compatible with dremel (North Burlington VT) $20]()
I have a brand new, unopened rotary tool with multiple accessories included to add to your tool box that is a must have for every do it yourself person.
I purchased a couple for gifts and never got to present this to the intended person.
It is corded and runs on 120v AC .
If interested, call or text Mike at 802-233-123 eight
Location: North Burlington VT
it's NOT ok to contact this poster with services or other commercial interests
02-14
Aletylene Torch set-ups (Springfield) $200
![Aletylene Torch set-ups (Springfield) $200]()
Retired HVACR contractor down sizing has 2 b tanks 2 mc tanks 2 reg and hose sand and several turbo tips.
For more info call Tom @ 802-885-5650
Location: Springfield
it's NOT ok to contact this poster with services or other commercial interests
02-14
Makita finish/sheet sander (Essex) $30
![Makita finish/sheet sander (Essex) $30]()
Makita finish sander with case and sanding sheets
$30
802-578-4715
Location: Essex
it's NOT ok to contact this poster with services or other commercial interests
02-14
ideal 200' fish tape +1/2 offset emt bender (essex junction) $50
![ideal 200' fish tape +1/2 offset emt bender (essex junction) $50]()
ideal # 31-064 fish tape +1/2 offset emt bender 50.00 or best offer for both
other electrical parts
cash must pick up
if interested please leave phone # will not reply to spamers
and their deceptive phrases
Location: essex junction
it's NOT ok to contact this poster with services or other commercial interests
02-14
Tool belt/rig/apron (Essex) $40
![Tool belt/rig/apron (Essex) $40]()
Dead on brand framers tool rig. Only used a few times
Very comfortable tool rig
$40
802-578-4715
Location: Essex
it's NOT ok to contact this poster with services or other commercial interests
02-14
Mini oxygen/acetylene setup (springfield) $100
![Mini oxygen/acetylene setup (springfield) $100]()
Retired HVACR contracror Down sizing and have a Mini oxy/acet outfit. Package includes
2 regulars, hoses, BRAZING TORCH , 2-B tanks and small oxygen tank.
For more Information Call Tom @802-885-5650
Location: springfield
it's NOT ok to contact this poster with services or other commercial interests
02-14
Jonsered 920 (enosburg vermont) $400
![Jonsered 920 (enosburg vermont) $400]()
jonsered 920 old but in ezcellent vcondition with alaskan chainsaw mill both saw and mill can use up to a 24" bar
Location: enosburg vermont
it's NOT ok to contact this poster with services or other commercial interests
02-14
american kelogg compressor (hyde park) $750
![american kelogg compressor (hyde park) $750]()
I have a very nice a/k air compressor . Its still on the original pallet it has been well cared for and serviced regularly and has years and years of service life to go. This isnt your run of the mill piece of crap that you buy at home depot this is the real deal. Buy it once buy it for life ! Easily keeps up with painting cars, buses, sandblasting whatever with ease and its quiet ! But the best part is its serviceable the electric motor has grease points like quality items used to back in the day, this obviously isnt a throw away deal ! I will gladly answer any questions you may have . Have the real deal for a fraction of what made in china junk will buy you ! changing directions and this will go quick so grab it while its available . 802-793-8572. leave a return number and ill call you back ! 5 HP 1720 RPM,60 CYCLE 230 VOLTS SINGLE PHASE MODEL 335 .
Location: hyde park
it's NOT ok to contact this poster with services or other commercial interests
02-14
15 ga finish gun (chester) $50
![15 ga finish gun (chester) $50]()
bostich 15 ga angled finish nailer no leaks have too many guns
Location: chester
it's NOT ok to contact this poster with services or other commercial interests
02-14
portercable framer (chester) $50
![portercable framer (chester) $50]()
Gun was dropped needs a part on nose. I have a hose clamp on it and it works well.
Location: chester
it's NOT ok to contact this poster with services or other commercial interests
02-14
propane torch set up (chester) $125
![propane torch set up (chester) $125]()
turbo torch set up with regulator hose and handle with ignitorn tip. Have a 8lb tank to go with it.
Location: chester
it's NOT ok to contact this poster with services or other commercial interests
02-14
Table Saw 10" (Huntington) $200
![Table Saw 10' (Huntington) $200]()
'
AMT American Machine Tool Model 4572 Great condition. $200.
Location: Huntington
it's NOT ok to contact this poster with services or other commercial interests
02-14
ridgid fiber cement saw (chester) $100
![ridgid fiber cement saw (chester) $100]()
Ridgid fiber cement saw with hose to take dust into bucket saw works geat for on staging apps. Newer blade on it.
Location: chester
it's NOT ok to contact this poster with services or other commercial interests
02-14
heater master 600,000 btu (crown point ny) $750
![heater master 600,000 btu (crown point ny) $750]()
600,000 btu master heater works good $800.00 or best offer
Location: crown point ny
it's NOT ok to contact this poster with services or other commercial interests
02-13
1950's Walker Turner Table Saw (Brookline VT) $400
![1950's Walker Turner Table Saw (Brookline VT) $400]()
PLEASE SERIOUS INQUIRIES ONLY! IF YOU WON'T MAKE THE DRIVE TO BROOKLINE VT, OR YOU DON'T HAVE THE MONEY, PLEASE DON'T WASTE MY TIME.
This Listing is for a 1950's Walker Turner Table Saw. We are asking $400.00 or best offer. We also have other Vintage Wood Making Machines for sale. They are : Disc Sander, Single Phase Motor Type, Style- 577897a 1/4HP, 220 Volts, Wallace Jointer, Craftsman Lathe with Homemade Stand, Jig Saw model 10323151, with Craftsman Motor. And we also have 40 year old Fine Wood, for sale, Some Mahogany, Black Walnut, Oak, Flat Cut Black Cherry , MY father-inlaw is selling the wood all together, not parting it out.. Please contact me if you would like more info.
ALL THESE MACHINES WERE MY FATHER-INLAW'S FATHER WHO WAS A CABINET MAKER IN GREENWICH, CT. MY FATHER IN-LAW IS A RETIRED TOOL MAKER. ALL THE MACHINES HAVE BEEN KEPT UP FOR THE MOST PART.
Please contact me if you would like to come see any of the machines or if you would like more info. Thank you!
02-13
Adjustable Aluminum Ladder Rack (Jay, VT) $500
![Adjustable Aluminum Ladder Rack (Jay, VT) $500]()
A system one utility ladder rack. It is the commercial one with the winches. Cost $918 dollars new and can be yours for only $500 dollars.
Location: Jay, VT
it's NOT ok to contact this poster with services or other commercial interests
02-13
Vanguard truck rack (Underhill) $450
![Vanguard truck rack (Underhill) $450]()
Vanguard HD truck rack with front extension. Bought new in 2008. Came off a GMC short box (6'6"). 76" front extension from mid support. Mesh window protection that also works well to hook bungees to. 180 degree swinging rear bar. Some paint is peeling and there is a bit of surface rust but otherwise solid.
Location: Underhill
it's NOT ok to contact this poster with services or other commercial interests
02-13
Sun tire balancer (Fletcher) $250
![Sun tire balancer (Fletcher) $250]()
An older SUN CWB 1742 tire balancer. Needs to be calibrated and I don't know how. Will balance to 0 but wont do it without multiple spins. Power spin, 120v with settings for weights on inside/outside and inside only. Includes cones. 849-2555, leave message.
Location: Fletcher
it's NOT ok to contact this poster with services or other commercial interests
02-13
Plasma Cutter (North Troy, VT.) $600
![Plasma Cutter (North Troy, VT.) $600]()
Thermal Dynamics Cutmaster 38, 110 or 220 Volt, cuts steel, aluminium, stainless and galvanized.
Used very little and is in excellent shape. Sells for $1,250.00 new - selling for $600.00.
If interested, I can e-mail pictures.
E-mail or call at (802) 988-2211 and ask for Marc. If no answer, leave a message and I will return your call.
Location: North Troy, VT.
it's NOT ok to contact this poster with services or other commercial interests
02-13
Craftsman 10" table saw (181 Collinsville Rd) $150
![Craftsman 10' table saw (181 Collinsville Rd) $150]()
Craftsman 10" table saw with 2 extensions and a 1 hp motor. It is on a stand with wheels.
questions call 802-586-9675
Location: 181 Collinsville Rd
it's NOT ok to contact this poster with services or other commercial interests
02-13
6ft High 29" Wide Scaffold (Wilder VT) $100
![6ft High 29' Wide Scaffold (Wilder VT) $100]()
One year old, six foot scaffold made by Husky. I paid $220 for it.
Email of Call Sam 802-698-8527
Location: Wilder VT
it's NOT ok to contact this poster with services or other commercial interests
02-13
brand new 96 " Bostich beam level (Windsor,VT) $75
![brand new 96 ' Bostich beam level (Windsor,VT) $75]()
I have a brand new 96 " bostich beam level for sale 75.00$ obo call 1-802-674-6807 look at pics
Location: Windsor,VT
it's NOT ok to contact this poster with services or other commercial interests
02-13
craftsman tablesaw (northfield) $200
![craftsman tablesaw (northfield) $200]()
heavy cast-iron top with cast-iron router table-wing about 8yrs old very-little use $200.00 cash 802 793 2408
Location: northfield
it's NOT ok to contact this poster with services or other commercial interests
02-13
Compound Miter Saw (Burlington) $85
![Compound Miter Saw (Burlington) $85]()
Kobalt 10" compound slider miter saw
Good shape, rarely used
Call, 802.324.8872
Location: Burlington
it's NOT ok to contact this poster with services or other commercial interests
02-13
Ridgid Jig Saw (Burlington) $85
![Ridgid Jig Saw (Burlington) $85]()
Ridgid R3121 Jigsaw, with hardcase
Excellent condition Call 802.324.8872
Location: Burlington
it's NOT ok to contact this poster with services or other commercial interests
02-13
Roofing Equipment For Sale
![Roofing Equipment For Sale]()
I am a self employed roofer and im getting out of it because im moving so i need to get rid of a buch of tools.I have 2 bostich coil nailers,3 ripping shovels,ridgid air compressor,3 ladders a 24 ft,32 ft, and a 20 ft.Also a 5 square roll of 0.60 epdm rubber and a coil air hose.If interested i have slate tools also such as 2 slate rippers,a slate cutter.Hav a dewalt skill saw, and a concrete hilti gun. I would like to get one set price for everything so make me a offer and i also might part with them seperately if price is right.Im going to take some pics but not of everything cause that is a lot of pics so please contact me (802)417-1861 and my name is bryan.If interested in rubber material i have all the stuff you need for rubber all the materials you could possibly need except for glue.Forgot to mention i have about 35 roof jacks the metal ones and im trying to download these pics but i can only do 4 but everything i said is there is and is in good shape
it's ok to contact this poster with serv
02-13
Truck Tool Box (Brand new) (Southern Vermont) $300
![Truck Tool Box (Brand new) (Southern Vermont) $300]()
Brand new full size Truck tool box. Bought from GM but will fit any full size truck. Never used still in Box list for $525.00 asking $300.00
Location: Southern Vermont
it's NOT ok to contact this poster with services or other commercial interests
02-13
wtb/t air compressor (saint albans)
![wtb/t air compressor (saint albans)]()
looking for an air compressor to run in a small garage doesnt have to be top of the line, just able to run air ratches things like that. if you got one for sale or would like to trade for anything let me know. have lots of things to trade electronics ect.
Location: saint albans
it's NOT ok to contact this poster with services or other commercial interests
02-13
MAKITA DRY WALL DRILL (ESSEX) $40
![MAKITA DRY WALL DRILL (ESSEX) $40]()
MAKITA DRY WALL DRILL ELECTRIC WORKS GREAT I'M NOT SURE IF THERE IS SPECIAL PIECE TO HOLD THE TIP CHECK PHOTOS OF TIP CAL 802-310-9139
Location: ESSEX
it's NOT ok to contact this poster with services or other commercial interests
02-13
LOTS TO SELL (SO BURLINGTON )
![LOTS TO SELL (SO BURLINGTON )]()
SNAPON TOOL BOX ALL 3 BOXES FOR 1200.00 HAS 20 DRAWER
STORAGE BOXES FOR TOOLS 35.00 ALL 3
CABLE WIRE 100.00 FOR ALL OVER 500 FT
TRUCK BOX 75.00
CALL 802 363 6044
Location: SO BURLINGTON
it's NOT ok to contact this poster with services or other commercial interests
02-13
Convertable Jet Pump (stamford, vermont) $150
![Convertable Jet Pump (stamford, vermont) $150]()
Brand new in box,Do it Best convertable jet pump, can be used for shallow well or deep well application. Model #416967, 1/2HP 13 amps. 115 volts or 6.5 amps 230 volts paid $230.00 sell for $150.00. If interested call 802-694-1586
Location: stamford, vermont
it's NOT ok to contact this poster with services or other commercial interests
02-13
Planer -- Grizzly 15" (Waterbury Center) $750
![Planer -- Grizzly 15' (Waterbury Center) $750]()
Model G1021
Extra Set of Knives
Very Good Condition
347-325-4216
Location: Waterbury Center
it's NOT ok to contact this poster with services or other commercial interests
02-13
2006 Laguna panel saw (Essex, Co NY) $5400
![2006 Laguna panel saw (Essex, Co NY) $5400]()
2006 Laguna sliding panel saw w/ 12" blade
Single phase 220/230 volt
Everything works as it should and in very good condition
Part time woodworker, located in my garage in upstate NY
Asking $ 5,400.00 cash I will reply to serious offers only please
Location: Essex, Co NY
it's NOT ok to contact this poster with services or other commercial interests
02-13
BOSTITCH FLOORING STAPLER (Berlin) $250
![BOSTITCH FLOORING STAPLER (Berlin) $250]()
Bostitch Pneumatic Hardwood Flooring Stapler. (not a nailer) VERY LOW MILAGE!!! MODEL M-111 includes Mallet and 11/2 boxes of 2" Staples!!!
New @ Home Depot +$479.00+tax
Staples 100.00
Total value $579.00+ !!!!!!
CALL 802 279-2551
Location: Berlin
it's NOT ok to contact this poster with services or other commercial interests
02-13
r.u.c. industrial drill press (burlington area) $75
![r.u.c. industrial drill press (burlington area) $75]()
very rugged dependable drill press.
1/4 hp , 3 speed, holds up to a 1/2 inch chuck.
Location: burlington area
it's NOT ok to contact this poster with services or other commercial interests
02-13
6000 watt generator (west topsham) $600
![6000 watt generator (west topsham) $600]()
craftsman 6000w generator in excellent condition. pull start. asking 600.00 obo cash only, please. call 802-439-3220
Location: west topsham
it's NOT ok to contact this poster with services or other commercial interests
02-13
2 Bostitch Framing Nailer Guns (Wells River) $125
Up for sale are 2 Bostitch framing nailers. One is a model N79WW-1 and the other is a N80SB-1. Both are in good working condition. Asking $125.00 for the pair.
Location: Wells River
it's NOT ok to contact this poster with services or other commercial interests
02-13
trade or for sale: B/O (woodbury)
![trade or for sale: B/O (woodbury)]()
I need a table saw, will also barter for shop tools, This saw is in new condition: will consider letting go of 8' wall mount bench that it mounts on.
GCM12SD 12" Dual-Bevel Glide Miter Saw
Axial-Glide System: Durable Precision -- consistent precision over tool life; Compact Workspace -- saves up-to 12" workspace; Glide Action -- unmatched smoothness of cut
Expanded Cutting Capacity: 14" horizontal capacity (nominal); 6-1/2-in. vertical capacity against the fence (base); 6-1/2-in. crown capacity against the fence (45° spring)
Upfront Bevel Controls - All-metal bevel lock lever and range selector located Upfront for quick and easy bevel settings without reaching behind the saw
Squarelock Quick-Release Fences: High-precision Squarelock fence aligns 90° to table and requires no adjustment; One-touch lock/unlock to slide fence for added support
Integrated Expanding Base Extensions: 60% more left-to-right material support than leading competitor - ; 40-inc
02-13
Carpenters Wall Brackets w/ Safety Posts (Montpelier) $25
![Carpenters Wall Brackets w/ Safety Posts (Montpelier) $25]()
10 sets of carpenters wall brackets with safety posts. Paint is flaking off, and there is some surface rust, but they are in solid condition.
$25 for each set, or make offer for all.
Location: Montpelier
it's NOT ok to contact this poster with services or other commercial interests
02-13
Yuasa Milling Machine Vise (Wells River) $75
Up for sale is a Yuasa (stock # 550-603) milling machine vise with aluminum jaws in good working condition. Jaws are 6" wide and open to about 4-3/4". Base is about 8" wide by 16" long. Asking $75.00
Location: Wells River
it's NOT ok to contact this poster with services or other commercial interests
02-13
Snap-on Instinct Soft grip screw driver set, New w/ Red handle (south Burlington ) $75
![Snap-on Instinct Soft grip screw driver set, New w/ Red handle (south Burlington ) $75]()
I have a brand new set of Snap-on Instinct screw drivers still in the plastic. Retails for $105. Looking for $75 OBO. Link to Snap-on website: http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=78365&group_ID=20402&store=snapon-store&dir=catalog
Possibly open to interesting trades.
Location: south Burlington
it's NOT ok to contact this poster with services or other commercial interests
02-13
1/2" Hand Conduit Benders (Middlesex, Vermont) $10
![1/2' Hand Conduit Benders (Middlesex, Vermont) $10]()
Have for sale Hand conduit benders $10.00 each very good condition. 1/2 . If interested call 802-223-2410. Thanks for your time.
I don't answer any e-mails CALL.
Location: Middlesex, Vermont
it's NOT ok to contact this poster with services or other commercial interests
02-12
Craftsmen 18volt Drill/Driver (Burlington) $30
![Craftsmen 18volt Drill/Driver (Burlington) $30]()
I have a Craftsmen 18volt Drill/Driver for $30, with charger and second battery. I got a new set for my b-day and no longer needs this drill. Serious buyers can call 999-7009 ask for Kris.
Location: Burlington
it's NOT ok to contact this poster with services or other commercial interests
