I need a good working Compuvalve from a factory installed Ford F 150 or F 250. GFI . I also need a Pressure regulator for the same vehicle. There are several model #s that will work. I may consider a non-working Compuvalve for less $ if it has the parts I need.Dave: 801-637-1776 Location: Sandy, UTits NOT ok to contact this poster with services or other commercial interests

Spare 4-runner parts 4-sale. engine parts: upper intake plenum, distributor, fuel rail, injectors, water pump/pulley, wiring harness/pieces, coolant housing; Latches: rear seat fold down latch, door latch+ door popper. Make offer for one or all, must Go!!! (801)654-3001 leave message or call after 5:00 pm. Also see: http://saltlakecity.craigslist.org/pts/1247709164.html for more toyota parts. Location: sandyits NOT ok to contact this poster with services or other commercial interests

this is a 1990 Toyota 4 runner tail gate and tire rack. the tailgate is bent from a collision. I must get rid of them and they are going as a pair; make offer. (801)654-3001 leave message or call after 5:00 pm Location: sandyits NOT ok to contact this poster with services or other commercial interests

Howdy,I have a pre runner style light bar/ brush guard for wide 4x4 truck bumpers. I had two lights mounted to it on a Landcruiser bumper and it looks good. Internal wiring. Welded out of tubular steel. Mounts with 4 tabs to bumper. Flat black.Gives better protection for a stock bumper. Dimensions are 65\"wide with the upper bar rising 6\"up and 6\" out from the lower. Looks great with 8\"+ driving lights.Let me know if you want to see it. Location: Sandyits NOT ok to contact this poster with services or other commercial interests

I just got new wheels and tires so I dont need these anymore. Theyre 17\" chrome wheels off of a 2008 Silverado 1500. They are a 6x5.5 bolt pattern and will fit any chevy truck or suv with that bolt pattern. The reason why Im asking what I am is because of the 255/65/R17 (30\") tires. The tires are only 8 months old and have barely 7,000 miles on them, perfect condition. They are nothing special but theyre a good all terrain. There are no scratches or imperfections in the wheels what so ever. Awesome condition and low miles. Also comes with a full size spare!Im not firm on the price so give me an offer. If interested please email or call Cody at:801-671-5248 (cell)801-327-9424 (cell) Location: Sandyits NOT ok to contact this poster with services or other commercial interests

Excellent Condition! Includes brackets & valve. DOT Approved, From EPA Approved Vehicle. Perfect for pickup bed. Dave: 801-637-1776 Location: Sandy, UTits NOT ok to contact this poster with services or other commercial interests

I need a good working Compuvalve from a factory installed Ford F 150 or F 250. GFI . I also need a Pressure regulator for the same vehicle. There are several model #s that will work. I may consider a non-working Compuvalve for less $ if it has the parts I need.Dave: 801-637-1776 Location: Sandy, UTits NOT ok to contact this poster with services or other commercial interests

The shell measures aprox 52\" wide and 72\" long. I just put new gas charged struts to hold the glass open on the back, and The side windows slide open and have screens to prevent bugs from getting in. The condition is good. Please call if you have further questions. Location: Sandy, UTits NOT ok to contact this poster with services or other commercial interests

I have an AEM Brute Force Air Intake System that I purchased last October for my Jeep Wrangler. Unfortunately, I have a 94, not a 97, so it will not fit. And apparently, I cant return it because it has been too long. My loss. I bought it brand new for $280. It is still in the box and has never been installed. Here are the listings for it from 4wd.com and jeepline.com. It is Part Number: AE 218301P Dyno tested to deliver more torque and horsepower. How does a 13 horsepower gain @ 5000 RPM for your 4.0L engine sound? Torque gains of over 15 ft/lbs. were also achieved at 4,500 RPM. AEM performs three-axis testing to qualify gains made at different throttle positions and to ensure extra power at every point across the rpm band. AEM air induction systems are individually tuned in length & diameter and are built to highest standards of construction. These kits include an exclusive throttle body spacer for maximum performance! Also features powder coated CNC mandrel-bent 6061 aluminum air tube with TIG-welded fittings and brackets. One-piece, cleanable & reusable four-layer cotton gauze filter provides superior filtration. The stainless steel heat shield blocks warm under hood air, allowing only colder (HP producing) air though the intake. Made in U.S.A. Pending C.A.R.B. exemption. Polished Finish. TJ Wrangler2.5L 4 cylinder engineSilver powder coatedMaximizes powerGain up to 13.3 horsepowerDryflow synthetic filter never needs oiledThe AEM BRUTE FORCE Intake System is dyno-tested to deliver more torque and horsepower than every intake on the market. Key features include: Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit, Heat shield included and One-piece AEM filter eases installation and improves performance. Manufactured and assembled in the USA. Pending C.A.R.B. exemption (50 state legal)·Limited lifetime warranty. Location: sandyits NOT ok to contact this poster with services or other commercial interests

This is a Lebra hood bra for the F body style Blazers, Jimmys, and Bravadas(92-96) if memory serves. Could fit other years as well. This came off a 93 S 15 Jimmy.Bra is in excellent shape and includes all hardware to install. Used very briefly.Please call 859-6719 with any questions. If I dont answer, leave a voicemail and I will call you back.Thanks

This is a brand new set of Vent Visor in channel window visors for the Ford F150 Super Crew 4 door 04-06 (newer body style).You get all 4 doors still sealed in plastic, never removed.Feel free to call with any questions.Thanks

What we have here is a Magnet Bra for a the WJ Grand Cherokee 99-04. Let me tell you, this is one sweet bra.This bra was only used for about a month before I chromed my grill and then didnt like the look of the two together.It goes on an off incredibly easily and quickly, clings magnetically to the car so as not to allow any dirt or water underneath, doesnt flutter/flap at high speeds and is theft proof.Also an excellent choice for you coach owners towing your WJs. Great rock chip protection, no diesel permeation, and easy to remove.Here is an excerpt from the manufactureres web site:· The worlds only patented, theft-proof magnetic car bras· Economical, easy to use· Looks that will knock your socks off· The only bras guaranteed not to damage your paint· Simple, elegant and functional· Designed for people who care about carsMagnetic Car BrasMagnetic car bras are made from safety-coated, flexible magnetic sheet, like magnetic car signs and the seal around your refrigerator door. Safety-coated magnetic sheet was developed especially for use on cars and trucks. It will not damage your paint even with long-term use. With minimum care it can be used indefinitely, even in the rain.Most bumpers have plastic covers which flex and absorb impacts. The flexing prevents rock chips. Magnetic car bras cover the front end of the hood, where almost all rock chips occur.The magnetic bras patented design makes it theft-proof and secure at any speed. A durable, U-shaped edge trim covers the leading edge and sides of the bra. The trim keeps wind and water out and makes it impossible to remove the bra without opening the hood.Flexible magnetic sheet precisely follows the contours of your hood. The finest detail will show through. You can even paint it - to match your cars color, with a logo or with your imagination. Painted or not, it will make your car look great, on or off.The magnetic car bra is available in white as well as black, which makes it almost invisible on white cars.As of April 2006, the magnetic bra will be made from a new, ultra-high-strength type of magnetic sheet. The new material is much more durable and it should double or triple the life of the bras. The new material is also more flexible, especially at low temperatures, and it is more than 50-percent stronger magnetically. Both features will ease installation and help to achieve a sleek fit on cars with sharp ridges or compound curves.Please call 859-6719 if you have any questions. If I dont answer please leave a message and I will call you back.Thanks,Dave

This is the factory OEM left rear taillight off a 99 Jeep Grand cherokee. Light is in excellent condition and fuctions perfectly. These will fit all WJs 1999-2004. Tailight also includes all 3 bulb sockets which are $26.95 each from Jeep, plus the taillight itself lists for $189.95.My right side developed problems so I replaced the set with aftermarkets.Please call 859-6719 with any questions. If I dont answer leave a message and I will call you back.Thanks,Dave