<< All salt lake city Classifieds 		salt lake city, arch/engineering

 Goto Image view
Add to Favorites Facebook MySpace Twitter Print
Title Location Compensation Date/Time
Electrical Engineer (Arizona) Arizona 56K-100K based on experience 2009-06-30 12:21PM
Benefits: They have full benefits. Medical, dental, 401k, paid vacation Travel: Up to 50% Relocation: Yes Interview Process: Phone Screen w/HR, then 2nd phone screen with owner and a PM and then a face to face. THIS PROCESS CAN TAKE UP TO 2 WEEKS Electrical engineer Job Duties: Engineer, design and maintain installation of electrical, instrumentation and automation system associated with processing plants, gas compression facilities, mining facilities and other related areas. This position will be focused on the design, specification, and procurement of control systems, low voltage switchgear, motor control centers, variable frequency drives. Engineering of electrical schematics, wiring diagrams, panel design, PLC and HMI hardware and programming software. Will troubleshoot circuit and/or design problems. Will follow instructions and pre-established guidelines to perform the function of the job under minimal supervision. Must be willing to travel up to 50%. Education Requirements: Masters Degree in electrical engineering Internship experience in PLC programming Key Competencies/ Skill Set: Demonstrated competency in electronic engineering including engineering principles, practices and procedures. Demonstrable ability in the following: Programming Allen-Bradley PLCs; Programming skills in C, VB and Matlab; Operation of various power, voltage and current measurement equipment via test instruments and hand tools; Analysis and solving complex problems; Use of Graphic Tools - Autocad and Intellution Ifix; Microsoft Office programs; Reading and understanding electrical schematics and drawings; Effectively communicating orally and in writing. Demonstrable knowledge of the following: RSLinx, RSNetworx, and RSLogix Software Tools; DeviceNet, ControlNet and TCP/IP Protocols; PLC ladder logic, digital and sequential logic programming methods, and process related closed-loop control systems; The National Electrical Code; API codes as applied to electrical installations. Work Conditions Working on-site in heavy industrial environments mostly but not limited to mining and gas industries. These environments may have the following conditions: Extreme temperature conditions, both hot and cold; in and/or around moisture; on slippery and/or uneven surfaces, in confined spaces; and at heights. Hours of operation and employee schedules vary based off each project and may require irregular or extended hour and travel for project completion. Travel includes both surrounding states and international travel. Will require frequent standing, occasional bending, squatting, climbing, twisting, balancing and reaching Will have exposure to noise, vibrations, well-treating chemicals, glycol, methanol, gasoline, natural gas and liquid hydrocarbons Will often work alone with minimum supervision Location: Arizona Compensation: 56K-100K based on experiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electrical Engineer (Salt Lake City, Utah) Salt Lake City, Utah 56K-100K based on experience 2009-06-30 12:19PM
Benefits: They have full benefits. Medical, dental, 401k, paid vacation Travel: Up to 50% Relocation: Yes Interview Process: Phone Screen w/HR, then 2nd phone screen with owner and a PM and then a face to face. THIS PROCESS CAN TAKE UP TO 2 WEEKSElectrical engineerJob Duties: Engineer, design and maintain installation of electrical, instrumentation and automation system associated with processing plants, gas compression facilities, mining facilities and other related areas. This position will be focused on the design, specification, and procurement of control systems, low voltage switchgear, motor control centers, variable frequency drives. Engineering of electrical schematics, wiring diagrams, panel design, PLC and HMI hardware and programming software. Will troubleshoot circuit and/or design problems. Will follow instructions and pre-established guidelines to perform the function of the job under minimal supervision. Must be willing to travel up to 50%. Education Requirements: Masters Degree in electrical engineering Internship experience in PLC programming Key Competencies/ Skill Set: Demonstrated competency in electronic engineering including engineering principles, practices and procedures. Demonstrable ability in the following: Programming Allen-Bradley PLCs; Programming skills in C, VB and Matlab; Operation of various power, voltage and current measurement equipment via test instruments and hand tools; Analysis and solving complex problems; Use of Graphic Tools - Autocad and Intellution Ifix; Microsoft Office programs; Reading and understanding electrical schematics and drawings; Effectively communicating orally and in writing. Demonstrable knowledge of the following: RSLinx, RSNetworx, and RSLogix Software Tools; DeviceNet, ControlNet and TCP/IP Protocols; PLC ladder logic, digital and sequential logic programming methods, and process related closed-loop control systems; The National Electrical Code; API codes as applied to electrical installations. Work Conditions Working on-site in heavy industrial environments mostly but not limited to mining and gas industries. These environments may have the following conditions: Extreme temperature conditions, both hot and cold; in and/or around moisture; on slippery and/or uneven surfaces, in confined spaces; and at heights. Hours of operation and employee schedules vary based off each project and may require irregular or extended hour and travel for project completion. Travel includes both surrounding states and international travel. Will require frequent standing, occasional bending, squatting, climbing, twisting, balancing and reaching Will have exposure to noise, vibrations, well-treating chemicals, glycol, methanol, gasoline, natural gas and liquid hydrocarbons Will often work alone with minimum supervision Location: Salt Lake City, Utah Compensation: 56K-100K based on experiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Part-Time Estimator $13.00 an hour. 2009-06-30 1:49PM
We are looking for a part-time estimator. We are a concrete waterproofing company looking for someone interested in putting together bids.Work from home. Compensation: $13.00 an hour. Telecommuting is ok. This is a part-time job.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Part-time Structural Engineer with Masonry Background Hourly Wage Based on Experience 2009-06-30 1:34PM
Utah Masonry Council is in search of a highly-motivated licensed structural engineer with 4 years of substantial masonry background. The Objective: To give instruction on how to better-understand masonry codes and issues. To answer technical questions from design professionals and construction personnel. To increase continuity and synergy between architects, engineers, and mason contractors. To deliver presentations to architects, engineers, and inspectors. Overview of Technical Director Position: The bulk of the format will be setting up and delivering one-hour presentations throughout the State of Utah.Flexible part-time hours are available, working approximately 20 - 40 hours a month.Several PowerPoint programs are already prepared and ready for presentation. It will be necessary to develop new presentations, as needed. Required Skills: Excellent presentation skills, experience in answering technical questions regarding masonry issues, i.e.: mortar, grout, bracing, movement joints, designing water-resistant walls, masonry detailing, etc. Preferred Skills: sense of humorPosition is open until filled Compensation: Hourly Wage Based on Experience This is a part-time job. This is at a non-profit organization.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Senior Electrical Engineer (Medical Devices) (Salt Lake City, UT) Salt Lake City, UT DOE....will ask for salary history 2009-06-30 9:54AM
Received a job opening for a Utah medical device company who is looking for a Senior Electrical Engineer that has expereince in a regulated product development environment. Some of the major skills and expereince we are looking for are 8 or more years related engineering experience, 5 years experience in high speed digital, and working knowledge of EMI. Requires a BS or higher degree in Electrical Engineering and a background with SMT (Surface Mount Technology). Any questions feel free to call 801-208-3700 or email epowell@consultnet.com Location: Salt Lake City, UT Compensation: DOE....will ask for salary historyPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
Electrical & Instrumentation Designer (Salt Lake City, Utah) Salt Lake City, Utah $30-$40/hr 2009-06-30 7:51AM
No relocation assistance, if from out of state must have ties to Utah.No contractors. This is a long term position.No job hoppers.Must have heavy industrial experience- petrochemical or refinery experience.If the word \"instrumentation\" is not in your resume, please dont send it.Experienced E&I Designer who has worked in heavy industrial companies. Must have HEAVY INDUSTRIAL experience. They should know facilities design and be excellent with instrumentation and power distribution. Should be excellent in AutoCAD. Location: Salt Lake City, Utah Compensation: $30-$40/hrPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Systems Engineer (Salt Lake City, Utah) Salt Lake City, Utah 80-95K 2009-06-30 7:45AM
You need to have experience with mechanical, electrical, and software engineering. OVERVIEWProduct teams for the clients product typically consist of an Electrical Engineer, a Mechanical Engineer, a Software Engineer, and a Systems Engineer. The Systems Engineer needs to be a generalist, but can come from any of the 3 backgrounds (ME, EE, or SE). REQUIREDBS in EE, ME, CS, or similar5+ years experience as a generalist - ie, must have experience working closely with the other 2 types in a group, to tie everything together.Ability to make bright people gel - acts as the informal project lead in the teamStrong analytical skillsIf ME - needs to have 3d Modelling experienceIf SW Eng - needs to have experience with scientific, data-driven development BONUSInline Pipe Inspection experience DESIREDMS Degree SOFT SKILLSAble to work largely unsupervisedAbility to work in a collaborative environment with other engineersCan either work quite a bit with clients or not, depending on preferenceSomeone who likes to own the projectBright, flexible, and able to grasp ideas quickly OFFICIAL JOB DESCRIPTIONSummary of Systems Engineer: We are seeking a talented multi-disciplinary engineer to join our inline inspection systems group, developing new technologies used to inspect pipeline systems worldwide. Primary Responsibilities: - Conceptualizes and designs In-Line Inspection tools. - Provides technical support to world-wide In-Line Inspection sales, manufacturing, and customer service groups regarding product and service applications, support, and complaint resolution. - Addresses technical problems by inventing solutions or changing system design. - Improves technical knowledge of department through on the job application and leverage of customer specific engineered solutions, participation in professional and industry trade organizations, reviewing technical papers/literature and attending appropriate seminars and workshops with the intent of applying the latest technology to both existing and new products. - Reviews work of self and others to ensure systems are designed with minimum complexity and maximum result. Ideal Candidates will Possess: - BS in an engineering field and at least 10 years experience. - Strong analytical and communication skills. - Ability to collaborate with many different technical disciplines. - Multidisciplinary design skills, including: o Mechanical design and analysis; SolidWorks experience is a plus. o Familiarity with electronic systems, including sensors and data acquisition. o Experience programming for data analysis purposes. MATLAB, Labview, or C/C++ familiarity is a plus. Preference will be given to candidates with experience in: - Permanent magnet design and analysis - Ultrasonic inspection techniques - Nondestructive testing - Inertial systems Location: Salt Lake City, Utah Compensation: 80-95KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Mid-level Electrical Engineer (Salt Lake City, Utah) Salt Lake City, Utah 68-85K 2009-06-30 7:43AM
5 year (give or take a year) electrical engineer- If you have much more or much less experience, please do not apply. You will not be considered.REQUIRED BSEE, BSCS, or similar - NO EETs DSP (Digital Signal Processing) experienceexperience with hardware and firmware design using C and/or C++ FPGA design experience Experience with realtime operating systems US CitizenDESIRED Experience in a USB Data Acquisition Environment Altium Microcontroller experience Verilog Matlab Labview (especially Labview RT) DAY-TO-DAY 70% of time working in teams (technical team of ~3 others) 30% of time working alone Hardware Design Board layout Embedded Firmware SOFT SKILLS Needs to be a team player Able to work very closely in a technical team of 2-3 OFFICIAL JOB DESCRIPTIONOur client designs and manufactures engineered systems for monitoring, pigging, tapping, plugging, and inspecting essential piping systems. In addition to providing all of these services, they are constantly looking for new opportunities to tap into new technologies, increase market share, and grow revenue. Primary Responsibilities:1. Applies knowledge of engineering principles to design electronic circuits and printed circuit boards.2. Designs or aids in the design of electronic and micro-processor based circuits.3. Maintains and debugs existing electronic circuits.4. Provides technical support to Production and Field Services staff.5. Plans and tracks project progress using project software.Requirements:1. Bachelors degree in Electronic Engineering, Computer Engineering or related field 2. Knowledge of commonly-used Hardware/Electrical Engineering concepts, practices, and procedures, including experience with designing electronic circuits and real time embedded systems, understanding of engineering development cycles, and the creation and maintenance for revision specifications. Familiar with assembly and embedded ‘C’ programming.3. Extensive experience with microprocessor architecture and design and electronic circuit design.4. Excellent communication skills, both verbal and written.5. Proficient in the use of personal computers; Microsoft Word and Excel software skill at the Intermediate Level.6. Some travel within and outside of the United States may be required. Location: Salt Lake City, Utah Compensation: 68-85KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Seismic Network Engineer (University of Utah ) University of Utah Negotiable 2009-06-29 2:02PM
Seismic Network EngineerJob ID: 36601 Job Summary: Come be a part of the Seismograph Stations team that provides accurate and timely data and information products for seismic events, including their effects on buildings and structures, employing modern monitoring methods and technologies. Responsibilities Responsible, jointly with other professional staff, for the operation, repair, and maintenance of nearly 200 stations forming part of the University of Utahs regional seismic network. Works frequently with IT specialists to establish data communication links through off-site firewalls, and works with telecommunications engineers to establish end-to-end system throughput. Maintains a detailed database of station parameters and repair histories. Interacts with equipment manufacturers and software engineers to ensure high-quality data collection. For new installations, selects sites, interacts with property owners, purchases equipment, performs site engineering work, and installs delicate instrumentation. May supervise one or more individuals assisting in the station installation process. Job requires frequent day trips and occasional overnight travel to field installations. Additional duties may be assigned relating to the installation and/or maintenance and operation of other types of seismic instrumentation as part of special field studies. In the event of an earthquake aftershock response, applicant must be prepared, on short notice, to rapidly deploy portable seismic recording equipment, potentially requiring extended travel for three or more days. Qualifications 1. Bachelors degree (or equivalent) in computer science, engineering, or related field and at least three years of experience in the discipline. 2. Valid Utah drivers license and proof of insurability. 3. Experience with diverse data communications hardware and transmission media such as modems, multiplexers, routers, terminal servers, FM radio, spread spectrum radio, DSL, Frame Relay, VPN, and cellular communications. 4. Experience with UNIX or Linux and Windows. 5. Excellent project management and interpersonal communication skills and must also be self-motivated and capable of problem-solving, both individually (unsupervised) and as a team member. Preferences 1. Experience with C, Perl, or other programming helpful. 2. Diversity of electronic and mechanical troubleshooting skills desirable. This would include experience with electronic test equipment (Volt-ohm meter, oscilloscope, spectrum analyzer, LAN tester, etc.), analog-to-digital conversion dataloggers, RF data transmission, electronic cable construction, and analog component-level electronics. Other Information Stations consist of seismic sensors, digital data acquisition systems, and associated telemetry equipment and are sited both in the urban built environment and in remote field locations throughout Utah and in parts of neighboring states. Must be capable of performing field work, sometimes under inclement conditions, and capable of strenuous physical labor. Site access may require hiking steep hillsides while carrying heavy batteries, concrete, and other site construction materials, commonly weighing fifty pounds or more. Work may require climbing tall radio towers at remote mountain top locations. Other Information This position requires successful completion of a drug test and criminal background check. How to Claim Vet Preference Applicants claiming Veterans or Disabled Veterans preference must submit a photo copy of their DD-214 and complete the Utah State Veterans Preference Addendum. Equal Employment Opportunity The University of Utah is an Affirmative Action/Equal Opportunity employer. Upon request, reasonable accommodations in the application process will be provided to individuals with disabilities. Job Closing Date Unless filled this job closes on July 31, 2009. Please apply online to www.jobs.utah.edu and reference job #36601 Location: University of Utah Compensation: Negotiable Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Senior Energy Outreach Coordinator - Nexant, Inc. (Salt Lake City) Salt Lake City Based upon experience 2009-06-29 1:17PM
SENIOR ENERGY OUTREACH COORDINATOR – SALT LAKE CITY, UTNexant, Inc. is a leading provider of experience-based management and technology consulting services and technology solutions to electric utilities, energy producers, petroleum and chemical companies, and government agency energy end-users worldwide. We are currently seeking a Senior Energy Outreach Coordinator for our Salt Lake City office. The successful candidate will be responsible for leading a team of industry outreach specialists. This team works with trade ally contractors and equipment distributors in marketing and promoting publicly-funded energy efficiency programs.Duties and Responsibilities:• Lead a team of technical outreach staff to promote energy efficiency through formal and informal trade alliance networks• Conduct training and educational outreach efforts with trade allies who sell, design, install, and market energy efficient technologies • Communicate with trade allies and customers regarding program requirements• Develop tools to illustrate energy project economics to customers and trade allies • Perform due diligence engineering review for program applicants and coordinating on-site inspection activities• Calculate and review customer incentive payments. Qualifications: • Associates, vocational, bachelor or master’s degree in mechanical engineering• 5-10 years lighting, HVAC, and/or other building system trades-related experience • Excellent written communication and superb interpersonal skills required• Demonstrated experience in team coordination and supervision of field staff in a professional work environment• Technical sales or contracting experience is a plus• Strong analytical skills with ability to manage multiple time-dependent tasks • Background in building systems engineering - particularly HVAC systems, is a plusNexant, Inc is an equal opportunity employer and encourages workforce diversity. We welcome applications from all qualified candidates.• Interested applicants should send a cover letter, resume and salary requirements to: jobs@nexant.com. Please reference “Sr. Energy Outreach Coordinator – UT – Your name” in the subject line.To learn more about Nexant and to view a list of all current employment opportunities, please visit www.nexant.com Location: Salt Lake City Compensation: Based upon experiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Project Engineer - Nexant, Inc. Based upon experience 2009-06-29 1:09PM
PROJECT ENGINEER – PORTLAND, ORNexant, Inc. is a leading provider of experience-based management and technology consulting services and technology solutions to electric utilities, energy producers, petroleum and chemical companies, and government agency energy end-users worldwide. We are currently seeking an experienced Project Engineer for our Portland, Oregon office. The successful candidate will be responsible for providing technical engineering support for energy efficiency programs. This candidate must be willing to train in our Salt Lake City, Utah office for 6 to 12 months prior to their permanent placement in Portland, OR. Duties and ResponsibilitiesProvide engineering support for Nexants Energy & Carbon Management practice which includes performing energy engineering services for utility and end-use clients and designing energy efficient programs for the utilities, and reviewing electric energy efficiency projects. This position will also require:• Interest in improving energy efficiency of commercial and industrial buildings including definition of energy efficiency measures and validation of effectiveness • Use of energy modeling tools, including eQuest, to evaluate buildings for energy efficiency improvements • Review building drawings and specifications to identify improvements in energy efficiency and to verify compliance to federal and state energy codes • Analyzing effectiveness of efficiency measures and quantify energy and cost savings associated with the measures • Estimate incremental costs associated with energy efficiency measures. • Understand and apply energy incentive program measures to projects to improve cost effectiveness • Develop and implement methods or tools that assist with the evaluation and selection of efficiency measures. • Regular contact with clients and program partners to continuously improve the effectiveness of energy efficiency programs. • Prepare and present reports to clients and program participants • Remain current on industry trends through self study and participation in trade groups. • Be creative and innovative in analyzing emerging and existing opportunities • Show initiative by engaging in new and complex projects • Be able to measure and verify energy efficiency measures • Ability to manage and complete multiple projects on time and in budgetExperience and Education Requirements• Bachelors or masters degree in mechanical engineering • At least 2 to 5 years building system design experience including HVAC, controls, and piping • LEED AP certification is desired • Experience with Department of Energy modeling tools such as eQuest DOE 2.2 is preferred • Familiarity with ASHRAE 90.1 2004 and 2007 and IECC 2006 Standards and Oregon Energy Code.• Client contact and relationship experience • Strong verbal and written communications skills, including report and presentation preparation • Excellent interpersonal and analytical skills Nexant is an equal opportunity employer and encourages workforce diversity. We welcome applications from all qualified candidates.• Interested applicants should send their resumes and salary requirements to jobs@nexant.com. Please reference \"Project Engineer-PDX\" in the subject line. To learn more about Nexant and to view a list of all employment opportunities, please visit www.nexant.com. Compensation: Based upon experiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Soils and Concrete Laboratory Technician (Bluffdale, Utah) Bluffdale, Utah D.O.E. 2009-06-29 10:11AM
Wilding Engineering, Inc. is seeking a soils and concrete laboratory technician. The technician should be proficient with AASHTO/ASTM methods for:- Proctor- Gradation- Atterberg- 200 Wash- SG of fine and coarse aggregate- Capping of cylindrical concrete specimens- Unbounded caps in determination of compressive strength of concrete cylinders- Compressive strength of cylindrical concrete specimens.Certifications:- ACI Concrete Strength Testing & Concrete Field Testing Technician, Grade I.Wilding Engineering offers a fast paced exciting work environment, excellent benefits and competitive salaries. Interested parties should deliver a resume and cover letter, either by fax to 801-553-9108 or by email to jobs@wildingengineering.com. Location: Bluffdale, Utah Compensation: D.O.E.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Firmware Engineer (Salt Lake City, Utah) Salt Lake City, Utah 45K-60K 2009-06-29 8:40AM
BS in Electrical EngineeringExperience in Firmware System DesignEmbedded Code Development (C/C++ Assembly)Testing and Debugging new and existing DevelopmentProgrammable Logic DesignDigital/Analog Design experienceJust out of school or a maximum of 2 years experienceGPA needs to be a 3.5 or higher Location: Salt Lake City, Utah Compensation: 45K-60KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electrical Quality Control (Hill AFB, UT) Hill AFB, UT TBD Based on Qualifications & Experience 2009-06-27 2:02AM
Construction Quality Control personnel ensure that their construction, complies with building codes and ordinances, and contract specifications. To monitor compliance with regulations, inspectors make an initial inspection during the first phase of construction and follow up with further inspections throughout the construction project.Quality Control - Electrical examine the installation of electrical systems and equipment to ensure that they function properly and comply with electrical codes and standards. They inspect new and existing sound and security systems, wiring, lighting, motors, and generating equipment. They also inspect the installation of the electrical wiring for heating and air-conditioning systems, appliances, and other components. Click here for more information, or to submit an application: https://hostedjobs.openhire.com/epostings/submit.cfm?fuseaction=app.jobinfo&id=23&jobid=288297&company_id=15697&version=1&source=ONLINE&JobOwner=1011723&level=levelid2&levelid2=103339&parent=Rockford%20Corporation%3B%3B%3BConstruction&startflag=3 Location: Hill AFB, UT Compensation: TBD Based on Qualifications & ExperiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Mechanical Engineer (Salt Lake City, UT) Salt Lake City, UT DOE - Full Benefits Package offered 2009-06-26 9:37AM
DESCRIPTIONHere is an awesome opportunity to join a new group that will formulate the future Center of Excellence. We are looking for bright, innovative engineers who are ready to develop amazing products ahead of schedule! We need an experienced Industrial Mechanical Engineer.DUTIESYou will be working with a highly sophisticated design team which will service Harman products across the globe. Responsibilities include: product definition, being part of an innovative team which will develop video processing and home theatre products. QUALIFICATIONSCritical skills and experience include the following:Bachelor\\s or Masters degree in Mechanical Engineering10+ years experiencePrevious experience with SolidWorks, PDMWorks, CircuitWorks, PhotoWorksExperience with sheet metal, extrusions, injection molding and materialsExperience in industrial designExperience with consumer electronics and home entertainmentExperience in a high-volume manufacturing environment For more information, or to apply now, you must go to the website below. Please do not email your resume to us as we only accept applications through our website. http://hmgsandyjobs.iapplicants.com/ViewJob-30284.html Location: Salt Lake City, UT Compensation: DOE - Full Benefits Package offeredPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
HVAC Project Manager- Light Industrial Projects (Salt Lake City, Utah) Salt Lake City, Utah 65-80K 2009-06-25 4:35PM
If you send your resume, please make sure youre HVAC experience is reflected.The Industrial Project Manager will be capable of working on multiple projects with overlapping deadlines. The ability to remain on schedule and budget while meeting all customer expectations is expected and must demonstrate superior communication and writing skills and strong presentation and computer skills. Experience working with architects, utility representatives, contractors and vendors and selling services to the same is a plus.Job Description4-10 years of relevant design build experience also HVAC project manager experience in a variety of projects particularly healthcare, hospitality, education and commercial industries. Design, engineering, and management of complete mechanical/HVAC building systems for diverse corporate, institutional, healthcare, industrial building projects. Experience in industrial markets such as food processing, manufacturing, semi-conductor, HVAC and piping as related to the support operations at mining sites.Design, engineering and project management of piping, process ductwork, HVAC and plumbing systems for a diverse customer base in the industrial field.Manage project team, including field foremen; enforce work and safety rules. Review project budget on a regular basis; report on variances and make adjustments as needed. Project management responsibilities include, but not limited to providing planning, staffing, scheduling, quality control and budget management on projects. Handle multiple complex assignments simultaneously with the ability to solve problems using new and innovative solutions. Responsible for all aspects of field labor; ensure that foremen are performing all administrative duties; ensure job site safety.Monitor and control expenses related to project work and ensure project forecasts and budgets are met for these expenses. QualificationsBachelors or Masters Degree in an Engineering discipline and minimum of 5-years in HVAC project management.4-10 years of design-build experience is a must with construction project management development, and implementation experience.Extensive knowledge of process systems such as steam, chilled water, compressed air, high purity piping, EMS systems, dust collection and project management.Extensive knowledge of supermarket, commercials and industrial HVAC, EMS systems, and project management.Strong computer skills, with a working knowledge of Microsoft Excel, Word, MS Project.Excellent verbal and written communication skills with the ability to converse with sales personnel, engineers, architects, vendors, trade representative, inspectors, and customers.Extensive knowledge of mechanical code and building code required.Some travel with overnight stays and night work required. Location: Salt Lake City, Utah Compensation: 65-80KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Façade Production Design Engineer (West Valley City) West Valley City DOE 2009-06-25 11:31AM
An international leader in Rainscreen Cladding systems (Metal and Terracotta) offers the position of a Façade Production Design Detailer. POHL has been in business since 1856 and employs approx 550 people in fabrication plants in Germany, Poland and the USA. POHL specializes in the Engineering and fabrication of custom made Architectural panel systems.In order to continue our growth, we have an opening for a Facade Detailer. This person will report directly to our Chief Engineer and support our Engineering and Sales team.Position Summary: Develops, organizes and implements the drafting standards necessary to efficiently prepare shop drawings to our customer’s expectations. Reviews project proposal or plan, customer’s scope and project specification to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements and allotment of available resources to each phase of project. The following qualifications/experience are required:• Technical knowledge of façade systems• Excellent interpretation of complex Architectural drawings• Ability to check fabrication drawings• Panel take-offs• AUTOCAD latest version• 5 years Drafting Experience of Metal panel systems• Good communication skills• Understanding a capability to draw in 3DQualified candidates are encouraged to email their resume for consideration of the position. Location: West Valley City Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Manufacturing/Mechanical Engineer (Salt Lake City) Salt Lake City DOE 2009-06-25 11:05AM
We have a need for a Mechanical Engineer to help in the development of their instrumentation. The ideal candidate will be capable of both leading and performing the engineering development, and transfer to production of a simple bench-top electro-mechanical product. Requirements:· BS in ME or equivalent field· 5 years minimum experience· Experience in a project leadership role within an FDA GMP or ISO design control environment.· Electro mechanical product design· 3D solid model CAD (SolidWorks preferred)Please apply by emailing your resume and include \"pat7116\" in the subject line. Location: Salt Lake City Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Engineering Project Manager (Salt Lake City) Salt Lake City TBD 2009-06-24 8:41AM
Seeking an Engineering Project Manager to manage the development of medical and laboratory instrumentation. This individual will manage a multidisciplinary engineering team and coordinate with chemistry, manufacturing, marketing, and business teams. This individual will be responsible for bringing to market of complex instrumentation product(s)Required:• BS minimum in ME or EE• Proven track record as an engineering project manager of medical device(s) including:o FDA GMP Design Control, and/or ISO EN13485 experienceDesired:• Electro-Mechanical or Instrumentation product experience• Genetics or other bio tech experience/exposure• Optics experience• Firmware/Software experience Location: Salt Lake City Compensation: TBDPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
MEP Superintendent (South Jordan, UT) South Jordan, UT TBD 2009-06-23 12:30PM
To apply please use the following link:http://www.skanska.com/en/Careers/Display/?jid=4387&language=ENGeneral Position SummaryMEP superintendent on a 240,000 SF data center project (with chiller plant). The project is located in South Jordan, UT. (a suburb of Salt Lake City) Current field superintendent staff includes: 1 general superintendent, 3 area/trade superintendents, 1 assistant superintendent and a full time safety superintendent. The staff also includes 4 project engineers to support the field activities, an assistant project manager, 3 project managers, a cost engineer, a project accountant and administrative staff. Specific responsibilities will be to work with other field superintendents and to oversee subcontractor work for chilled water distribution, chiller plant, fire suppression, plumbing, BMS; in parallel with electrical support, duct work/AHU Install, and start-up and commissioning.The Superintendent is responsible for field operations on the project(s) assigned in order to achieve timely and profitable completion of each project. The Superintendent directly supervises field labor force, including laborers/craft workers. This position must demonstrate strong leadership, organizational and time management skills, as well as have strong communication and client service skills. Major Duties & Responsibilities• Direct day-to-day on-site supervision of field labor force• Inspection of Contractor or (Sub)Contract operations to ensure compliance with Contract• Review and approve Trade Contractor Payment Applications with Project Manager• Maintain good relationships with internal and external clients, including representatives of Owner and Architect/Engineer• Develop and maintain site logistics plan, in coordination with Project Manager• Conduct quality inspections• Coordinate site testing and inspection efforts• Monitor costs, including labor time and material• Communicate and enforce Skanska Safety and Health Management Program• Demonstrate commitment to an Injury-Free Environment through own actions and mentoring others• Manage schedules, including preparation of detailed short-term schedules and ensuring all activities take place on or ahead of scheduled dates• Prepare and submit Superintendent’s Daily Reports• Attend and participate in project meetings, including subcontractor meetingsJob Skills & Abilities• Computer knowledge and efficiency, including Microsoft Office products• Knowledge of Prolog• Broad understanding of industry• Familiarity with requirements of drawings and specifications and with terms and conditions of Project Contracts, Subcontracts and Purchase Orders• Strong written and verbal communication skills• Good math/accounting skills• Strong management skills• Strong ability to read drawings and specifications• Functions effectively as part of a team• Exhibits strong leadership qualities• Ability to maintain discretion and confidentiality at all times• Delegates work appropriately• Strong decision making/problem solving skills• Excellent time management and organizational skillsEducation and/or ExperienceJunior College or Vocational education desiredOSHA certificationFirst Aid/CPR certification5+ years of industry experienceAuthorityThe Superintendent derives his or her authority, and performs all duties with guidance, from the Senior Project Manager, General Superintendent, Project Executive, or Account Manager.The Superintendent is responsible for supervising, managing and coordinating the efforts of the field labor force on a day-to-day basis. This person supervises two or more professional level persons on a full-time basis. Work Environment/Job ConditionsThis position requires frequent walking, standing, bending, and reaching. He/she must be able to navigate the jobsite and must comply with all Company safety requirements in the office and on the jobsite. Heavy equipment may be used and he/she needs to be able to lift weighty objects. The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be a complete list of all responsibilities, duties and skills required of personnel so classified. Duties and responsibilities may be added or changed as deemed appropriate by management at any time. Location: South Jordan, UT Compensation: TBDPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electrical/Mechanical/Plumbing Engineers needed ASAP! (Albuquerque, NM) Albuquerque, NM OPEN 2009-06-23 12:25PM
As the largest MEP firm in the Southwest, B&P specializes in engineering design for office buildings, data centers, hospitals, laboratories, central plants & educational facilities. Joining their staff requires knowledge of the building construction industry, preferably health care experience. Will consider all candidates with applicable experience in all disciplines; however the following specific candidates are immediately needed. Electrical Engineer/Designer: Min. 5 years experience in engineering and design of electrical systems for healthcare facilities. Must be able to produce documents detailing all associated systems (power/emergency distribution, lighting, fire alarm, nurse call, code blue, telecom, etc.) AutoCAD proficient. Sr. Mechanical Engineer: Min. 10 years experience with PE. Must be able to serve as project engineer, develop scope of work, fee proposals, and manage design staff/workload. Sr. Plumbing Engineer/Designer: Min. 10 years experience in plumbing systems design with medical gas, process water and fire protection for medical facilities. Candidates should be proficient with AutoCAD Location: Albuquerque, NM Compensation: OPENPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Process Engineer/Chemical Engineer (Salt Lake City, Utah) Salt Lake City, Utah negotiable 2009-06-23 3:21PM
Required:BS in Chemical Engineering 2-5 years Petro Chemical or Oil Refinery experience Must have refinery experience Presentation Skills Project scoping, design, installation and startup and process optimization at a 30,000 BPD oil refinery.Desired:Process Design Package knowledge (Hysis)Personality:Team Player Ability to work and think on their ownDay to Day:Provided day to day technical support for several operation units Process optimization Develop projects that support process optimizationRelocation:To be negotiated. Location: Salt Lake City, Utah Compensation: negotiablePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electrical Engineer (Salt Lake City) Salt Lake City $45-50K 2009-06-23 3:20PM
Need an Electrical engineer with architect office experience. 2-5 years working experience. Location: Salt Lake City Compensation: $45-50KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
HVAC Industrial Project Manager (Salt Lake City) Salt Lake City negotiable 2009-06-23 9:38AM
QualificationsDegree preferred, but not a necessity.Bachelors in an Engineering discipline and minimum of 5-years in HVAC project management.4-10 years of design-build experience is a must with construction project management development, and implementation experience.Extensive knowledge of process systems such as steam, chilled water, compressed air, high purity piping, EMS systems, dust collection and project management.Extensive knowledge of supermarket, commercials and industrial HVAC, EMS systems, and project management.Strong computer skills, with a working knowledge of Microsoft Excel, Word, MS Project.Heavy industrial experience (mining, power plants, heavy industrial facilities. (This does not include semiconductor fabs, or commercial projects)Excellent verbal and written communication skills with the ability to converse with sales personnel, engineers, architects, vendors, trade representative, inspectors, and customers.Extensive knowledge of mechanical code and building code required.Some travel with overnight stays and night work required.Job Description4-10 years of relevant design build experience also HVAC project manager experience in a variety of projects particularly healthcare, hospitality, education and commercial industries. Design, engineering, and management of complete mechanical/HVAC building systems for diverse corporate, institutional, healthcare, industrial building projects. Experience in industrial markets such as food processing, manufacturing, semi-conductor, HVAC and piping as related to the support operations at mining sites.Design, engineering and project management of piping, process ductwork, HVAC and plumbing systems for a diverse customer base in the industrial field.Manage project team, including field foremen; enforce work and safety rules. Review project budget on a regular basis; report on variances and make adjustments as needed. Project management responsibilities include, but not limited to providing planning, staffing, scheduling, quality control and budget management on projects. Handle multiple complex assignments simultaneously with the ability to solve problems using new and innovative solutions. Responsible for all aspects of field labor; ensure that foremen are performing all administrative duties; ensure job site safety.Monitor and control expenses related to project work and ensure project forecasts and budgets are met for these expenses. Location: Salt Lake City Compensation: negotiablePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Emergency Response or Industrial Hygienist (SLC) SLC 60-70K 2009-06-23 9:26AM
Mid-sized refinery in SLC is looking for a qualified Emergency Response Specialist with general safety background OR an Industrial Hygienist with safety for an immediate permanent opportunity. The job responsibilities for the emergency position are listed below. Interested Industrial Hygienists can also apply for an excellent opportunity in the refinery world. Job Responsibilities for Emergency Response position: Coordinate Safety and Fire efforts for refinery Emergency response team coordination Safety & Fire equipment inspection Perform safety audits Policy & procedure development and trainingPosition requires five years experience in the petrochemical industry (long-term work at a refinery or chemical environment - contracting in those environments, while valuable, will only be considered if long-term employment in a refinery setting is included) and the ability to consult and make recommendations on emergency response issues. Bachelors degree in Safety, Fire Protection, or Industrial Hygiene is preferred although candidates with training and related experience will be considered. Specialized training in Industrial Hygiene, Hazmat, EMT or Industrial Fire Fighting is highly beneficial. Location: SLC Compensation: 60-70KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Environmental Engineer - Recent College Grad Preferred (SLC) SLC 50-70K 2009-06-23 9:18AM
A well tenured Utah engineering company in the Oil & Gas field currently has a career opportunity for an Environmental Engineer in Salt Lake City, UT. The right candidates responsibilities will include air quality regulation/permit compliance, EPA NSR/PSD compliance, emission reporting, review of emission data, regulatory analysis, field sampling/testing, overseeing contractors, and assisting with government regulations. This position also provides support for compliance with relation to fuels, wastewater, hazardous waste/materials, solid waste, and drinking water systems/operations. The successful candidate will be able to perform environmental compliance duties under minimal supervision. They may also direct or lead the work of others from time-to-time. They should have an understanding of the processes used in oil refining as well as the associated environmental regulations. A degree in Chemical Engineering or related engineering degree required. Recent college graduate with strong GPA preferred! This position is for an individual with strong educational background and strong desire to follow environmental engineering as a career path. Submit resume and salary expectations immediately! Location: SLC Compensation: 50-70KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Process Engineer (HSES-007) (Hill AFB, UT) Hill AFB, UT Competitive 2009-06-22 2:55PM
Click here to apply for this Process Engineer Job (Hill Air Force Base, UT, US)Hill Air Force Base, UT, USTYBRIN is a premier provider of process-based systems and software engineering products and services. We are proud to have been awarded the opportunity to support the 309th Software Engineering Services contract at Hill AFB, UT TYBRIN is seeking an experienced professional skilled at software engineering process development, consulting and training for various software engineering disciplines, periodical publishing (i.e. CrossTalk), and technical conference support. Education Required: · BSEE, BSME, BSAE, BSCSAdditional Requirements: · 2+ years related experienceU.S. CITIZENSHIP REQUIRED. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Location: Hill AFB, UT Compensation: CompetitivePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Industrial Hygine or Safety Engineer (Salt Lake City, UT) Salt Lake City, UT 70K range 2009-06-22 1:35PM
General Duties:Coordinate and implement Industrial Hygiene program for the refinery, including the development and implementation of the sampling strategy plan, conducting personnel and area air samples, approving new chemicals and administering bloodborne pathogen, benzene, radiation safety, lead and asbestos compliance programs. Conduct employee safety training and new hire orientations. Issue hot work and confined space entry permits. Develop and maintain safety and health standards. Must be available for after-hours call out for plant emergencies and permitting issues. Background Requirements:3-5+ years of experience as an Industrial Hygienist(or Safety Professional with background in IH)Petroleum refining or Chemical industry experience is REQUIRED.Candidate must have the following certifications or be capable of achieving them while employed:~CIH-Certified Industrial Hygienist and/or CSP-Certified Safety Professional~RSO-Radiation Safety Officer~AHERA-Asbestos Building Inspector~Hazmat Technician Educational Requirements:Bachelor of Science in Industrial Hygiene or Safety.BS in Engineering sciences or related technical fields may also be considered for employment based on relevant work experience and professional certifications. Physical Requirements:Ability to work in an industrial environment, including but not limited to chemicals, pressure vessels, tanks and rotating equipment. Must be willing and able to perform outdoor duties under wet and/or oil contaminated conditions at both below grade and elevated positions. Must satisfactorily complete a comprehensive medical physical examination.Any questions feel free to call Ed at 801-208-3700 or email epowell@consultnet.com Location: Salt Lake City, UT Compensation: 70K range Principals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
Project Manager- Industrial Projects (HVAC) (Salt Lake City, Utah) Salt Lake City, Utah 65-80K and bonus 2009-06-12 11:52AM
The Industrial Project Manager will be capable of working on multiple projects with overlapping deadlines. The ability to remain on schedule and budget while meeting all customer expectations is expected and must demonstrate superior communication and writing skills and strong presentation and computer skills. Experience working with architects, utility representatives, contractors and vendors and selling services to the same is a plus.Job Description4-10 years of relevant design build experience also HVAC project manager experience in a variety of projects particularly healthcare, hospitality, education and commercial industries. Design, engineering, and management of complete mechanical/HVAC building systems for diverse corporate, institutional, healthcare, industrial building projects. Experience in industrial markets such as food processing, manufacturing, semi-conductor, HVAC and piping as related to the support operations at mining sites. Design, engineering and project management of piping, process ductwork, HVAC and plumbing systems for a diverse customer base in the industrial field. Manage project team, including field foremen; enforce work and safety rules. Review project budget on a regular basis; report on variances and make adjustments as needed. Project management responsibilities include, but not limited to providing planning, staffing, scheduling, quality control and budget management on projects. Handle multiple complex assignments simultaneously with the ability to solve problems using new and innovative solutions. Responsible for all aspects of field labor; ensure that foremen are performing all administrative duties; ensure job site safety. Monitor and control expenses related to project work and ensure project forecasts and budgets are met for these expenses. QualificationsBachelors or Masters Degree in an Engineering discipline and minimum of 5-years in HVAC project management. 4-10 years of design-build experience is a must with construction project management development, and implementation experience. Extensive knowledge of process systems such as steam, chilled water, compressed air, high purity piping, EMS systems, dust collection and project management. Extensive knowledge of supermarket, commercials and industrial HVAC, EMS systems, and project management. Strong computer skills, with a working knowledge of Microsoft Excel, Word, MS Project. Excellent verbal and written communication skills with the ability to converse with sales personnel, engineers, architects, vendors, trade representative, inspectors, and customers. Extensive knowledge of mechanical code and building code required. Some travel with overnight stays and night work required. Location: Salt Lake City, Utah Compensation: 65-80K and bonusPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Controls and Automation Engineer (Salt Lake City, Utah) Salt Lake City, Utah $65-80K based on experience 2009-06-12 11:22AM
JOB TITLE – Building Automation GENERAL SUMMARY OF DUTIES – Uses knowledge of pneumatic and electrical/electronic controls to perform skilled work installing, altering, calibrating, programming, repairing, maintaining, and designing HVAC control systems, building automation control systems, and energy management control systems to ensure safe and correct environmental and ecological conditions in all buildings. SUPERVISOR – Controls Building Automation Manager SUPERVISES – N/A DUTIES INCLUDE BUT ARE NOT LIMITED TO· Provide field programming, startup of controls, and interface with the service department to repair and modify HVAC controls. · Coordinate the installation by subcontractors and assist in the installation of wire and other devices as necessary.· Responsible for control service contracts sold and contracted by the service department (from visual inspections to database modifications and maintenance). · Installs and modifies HVAC systems, performs corrective and preventive maintenance on HVAC systems. · Responds to HVAC systems complaints by inspecting the work site to assess the job requirements. · Renovates and upgrades HVAC systems and control systems to accommodate new technology and/or energy conservation.· Compiles information for job estimates, keeps accurate record of tests, inspections, repairs, and equipment replacement. · Perform other duties as assigned KNOWLEDGE, SKILLS, & ABILITIES: · Communication – communicates clearly and concisely· Knowledge and Skills- Comprehensive understanding of building systems and capable of diagnosing mechanical systems and controls interaction. - Capable of assisting in the design and layout of controls systems that may be required for retrofit. - Capable of developing and maintaining customer relationships and working closely with customers to maintain and manage the databases of the Building Automation Systems. -Ability to program and troubleshoot Johnson Controls DDC systems, Alerton DDC systems, and Trane DDC systems. -Knowledge of Basic based programming language. -Ability to create and modify graphics necessary for Building Automaton Systems. -Ability to create and troubleshoot small Ethernet Networks. -Ability to connect to Building Automation Systems via the Internet, modems, and other communication formats. -Understanding building piping and pumping systems. -Understanding building air movement systems. -Understanding building electrical and low voltage systems. · Customer orientation – establishes and maintains long-term customer relationships, building trust and respect by consistently meeting and exceeding expectations· Interpersonal skills – able to work effectively with other employees, supervisors, and external parties· Policies & Procedures – demonstrates knowledge and understanding of organizational policies, procedures and systems· PC skills – demonstrates proficiency in Microsoft Office applications, Visio, and other common software applications. · Basic skills – able to perform basic mathematical calculations, balance and reconcile figures, punctuate properly, spell correctly and transcribe accurately EDUCATION· Associate’s Degree or equivalent from a Technical/Trade School with a certificate in heating, ventilation, and air conditioning, and five years related experience; or seven years related experience; or equivalent combination of education and experience. Location: Salt Lake City, Utah Compensation: $65-80K based on experiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
AutoCAD Drafter (SLC) SLC DOE 2009-06-12 9:46AM
A well tenured and established company is looking for a qualified AutoCAD Drafter to join their team. REQUIREMENTS * Must have 3+ years of AutoCAD Drafting experience (AutoCAD 09)* Must have experience with Rivit Architectural Software Program (Revit 09 or 10)* Architectural and/or electrical background preferred This is a fantastic opportunity for the right candidate to join a great team and work to be trained as a designer. Salary is commensurate with experience. Interested candidates should submit their resume and salary expectations immediately for consideration. Location: SLC Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Architect/intern (salt lake city) salt lake city to be determined base on qualifications 2009-06-12 9:29AM
Small architectural firm seeking individual with B. Arch or M. Arch graduate with 5-10 years working experience. Candidate will work under architects direction to assist in completing construction documents. Candidate must be a responsible person with initiative.email cover letter, resume, and portfolio to swork.811@gmail.com Location: salt lake city Compensation: to be determined base on qualificationsPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Quality Engineer I (Salt Lake City) Salt Lake City DOE 2009-06-11 12:26PM
Join the medical device industry with an outstanding company located in Salt Lake City. Ascent Executive Search has an excellent opportunity with one of their top clients. We are taking resumes from candidates with a Quality Engineering backgrounds with an interest in R&D/Manufacturing. Please send Word resumes directly to bruceh@ascentsearch.com or call 801-272-9300 with questions. Considered candidates will be responsible for the following:1. Initiates new or revised documentation and tracks through appropriate approval cycles and implementation 2. Maintains a professional working relationship with internal & external customer and support staff 3. Participates and/or leads cross-functional teams. 4. Provides technical support for manufacturability, risk mitigation and quality systems. 5. Reviews physical and functional test requirements to assure specifications & regulations are met. 6. Reviews and approves protocols, reports and data. 7. Supports design controls and product development process 8. Inspection plan generation 9. Implement process controls 10. Understands and follows company procedures and regulatory requirements. 11. Participates in and provides input to training on department & division procedures, and policies. 12. Participates in project strategy / planning. 13. Analyzes problems in design, process and test development. 14. Prepares and presents oral and written project updates and technical discussions. Essential Job Functions: Basic Qualifications: This position requires: Bachelor degree in an engineering or life sciences. 2+ years of experience in an engineering capacity with a regulated industry. Strong analytical skills. Location: Salt Lake City Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
Electrical Engineer (Sandy, UT) Sandy, UT DOE 2009-06-11 4:28PM
Instrumentation & Power EngineerWork Location: Sandy, UTPreparing calculations and sketches for a detailed segment of a project; prepare technical specifications for review and approval; evaluate vendor bids and drawings to assure compliance with specifications for reviews; approve design drawings for assigned segment of a project; monitor the activities of subcontracted technical services; assist with the development of design guides, guide specifications, and design control procedures; supervise work through the planning and scheduling of work and the review of approval of tasks when functioning a \"lead \" capacity. BS degree in Electrical Engineering; at least 8 years of related work experience in consulting engineering doing heavy industrial; including MCCs, Power Systems, Load studies, Instrumentation and Cable Trays. Must be capable of exercising independent judgment in evaluating, selecting ad applying standard design engineering techniques, procedures and criteria to make minor design adaptations and modifications; proficient computer skills. Any questions call Ed at 801-208-3700 or email epowell@consultnet.com Location: Sandy, UT Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
Electrical Engineer (Salt Lake City) Salt Lake City $40/hr 2009-06-11 3:11PM
Electrical EngineerBSEE or higher3-7 years experience as an electrical engineer.Required: Experience with low-, medium- and high-voltage power distribution, including substations, transmission lines, switchgear and motor control centers. Working knowledge of NEC, NESC and other pertinent documents. Experience with electrical systems at large industrial and mining facilities and familiarity with one-line diagrams, electrical schematics wiring diagrams and other associated drawings. Preferred: Experience with electrical system studies, including load flow, voltage drop, short circuit, relay coordination, arc flash and motor starting. Experience with instruments and Piping & Instrument Drawings (P&IDs). Professional Engineer (PE) or Engineer-In-Training (EIT).Willing to travel to customer sites and/or to work out-of-town for extended periods. Location: Salt Lake City Compensation: $40/hrPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Mechanical Engineer (Salt Lake City) Salt Lake City $32-40/hr 2009-06-11 3:11PM
Local Candidates onlySeeking a facilities, heavy industrial type mechanical engineer. Need to be experienced with sizing and specification of pumps, valves, piping, conveyors. Equipment design might include material handling, conveyors and other related equipment.Position may start out part-time in Ogden. Otherwise will be in the Salt Lake City office.In Summary: General heavy industrial work, specs, & calcs, piping, material handling, conveyors, etc. Strong AutoCAD skills a plus.Contract to direct. $32-40/hr. Location: Salt Lake City Compensation: $32-40/hrPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Seeking SolidWorks Proficient Designer (Salt Lake County-Utah County) Salt Lake County-Utah County Hourly, or by bid 2009-06-11 2:16PM
Looking for and industrial designer who is proficient in SolidWorks design software. Kitchen appliance design experience is helpful. This is a single job contractor/freelance position. Location: Salt Lake County-Utah County Compensation: Hourly, or by bid This is a contract job. OK to highlight this job opening for persons with disabilitiesPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Mechanical Engineer (Salt Lake City, UT) Salt Lake City, UT DOE 2009-06-11 11:23AM
Seeking a facilities, heavy industrial type mechanical engineer. Need to be experienced (10+ years) with sizing and specification of pumps, valves, piping, conveyors. Equipment design might include material handling, conveyors and other related equipment.Position may work part of the time in Ogden. Otherwise will be in the Sandy office.In Summary: General heavy industrial work, specs, & calcs, piping, material handling, conveyors, etc. Strong AutoCAD skills a plus.Work location Sandy, UT.Please send resume to epowell@consultnet.comAny questions please call Ed at 801-208-3700 or email epowell@consultnet.com Location: Salt Lake City, UT Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
QUALITY ENGINEER (Salt Lake City, UT) Salt Lake City, UT competitive 2009-06-10 2:52PM
We are looking for a Quality Engineer level I for our manufacturing client in Salt Lake City. In this position you will support R&D and the manufacturing settings by performing quality engineering and managing the processes. Prior certification in ASQ is preferred but not required coupled with 3 years of experience in a QA position within a regulated environment.To be considered immediately please forward a WORD version of your resume to the address provided and we will follow up. We thank you in advance for your interest and inquiry. We will respond to all candidates that closely fit these requirements. Location: Salt Lake City, UT Compensation: competitive OK to highlight this job opening for persons with disabilitiesPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
PM Construction tbd 2009-06-10 2:11PM
Project Manager/EstimatorRETAIL/ RESTURAUNT/ BIG BOXWe are looking for individuals who can take the project from \"cradle to grave\". Project Managers function is to perform, oversee and/or facilitate all aspects of estimating, scheduling, procurement and construction. Our goal is to have each Project Manager to have complete autonomy in dealing with their clients and are empowered to make all decisions related to their projects. Please send your resume and a project list. Compensation: tbdPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electrial Engineering Technician (Salt Lake City) Salt Lake City 55k/year 2009-06-10 10:44AM
Need someone to work with electrical on heavy equipment such as: drill rigs and cranes. Must be able to read drawings and plans. Position is temporary but may become permanent. $55k/year. Must be able to travel to remote job sites. Can be based out of Las Vegas or Salt Lake City. 5 days/ week, maybe weekends. Must have electrical engineering degree. Please send resume. Location: Salt Lake City Compensation: 55k/yearPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Junior Firmware Engineer (Salt Lake City, Utah) Salt Lake City, Utah $40-65k 2009-06-10 9:49AM
Firmware Engineer- LOCAL CANDIDATES ONLY, NO MORE THAN 2 YEARS OF ON THE JOB EXPERIENCE.Jr-level, right out of school or 0-2 years of experience.BS in Electrical Engineering, experience preferred in Firmware System Design, Embedded Code Development (C/C++ & Assembly), Testing & Debugging New and Existing Development, Programmable Logic Design, Digital/Analog Design. Great work environment, small engineering teams, wide variety of experience. Relocation assistance not available. Location: Salt Lake City, Utah Compensation: $40-65kPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
DRIVETRAIN ENGINEER (Portland, OR or ???) Portland, OR or ??? Hiighly Competitive 2009-06-09 5:45PM
This job may be located at our Corporate HQ in Portland, Oregon or in another location near a major metropolitan airport. To apply (Job # 90104) and learn more visit the Careers page on our website. www.iberdrolarenewables.us IBERDROLA RENEWABLES is seeking a Senior Wind Turbine Drivetrain Engineer who will be responsible for supporting the operations of Iberdrolas wind turbine fleet. This individual will be responsible for monitoring wind turbine drivetrain performance, investigation and mitigation of turbine gearbox and sub-system failures, and develop programs to improve wind turbine drivetrain performance and/or reduce the cost of long-term operations. Responsibilities include:• Visit wind plants to perform root cause failure investigations on wind turbine drivetrain components. • Manage external professionals who provide technical expertise and project support in evaluation of operational and performance issues. • Organize and lead conference calls with suppliers to ensure their compliance with contractual obligations. Reviews suppliers root cause failure analysis and corrective action documentation. • Organize and manage product improvement programs designed to increase wind turbine performance and/or reduce operational costs. • Work with Procurement to develop and qualify second and third-tier parts suppliers. • Assists wind farm Operations and Maintenance personnel with other wind turbine infrastructure components such as but not limited to; yaw systems, pitch systems, and high-speed shaft couplings. • Adhere to effective internal controls.REQUIREMENTS• Bachelors degree in Mechanical Engineering or equivalent combination of education and experience. • 7 years experience in heavy planetary and helical gearbox design and operations. • Demonstrated experience with power transmission of 2,000 HP capacity or greater. • Demonstrated experience in root-cause-failure-analysis activity. • Familiarity with various bearing configurations. • Experience with synthetic lubricants and high-performance oil filtration systems. • Familiarity with various condition monitoring technologies • Ability to climb 90 meter steel towers on occasional basis to perform root cause analysis investigation on turbine component failures. • Ability to occasionally lift items weighing up to 50 pounds. • Advanced computer skills utilizing word processing, spreadsheets, email, facility control, data management, CAD, and reporting systems. Must be able to use computerized diagnostic, analysis, and troubleshooting tools. • Ability to interpret and follow a variety of instructions furnished in written, oral, diagram, or schedule form. • Possession of comprehensive writing skills for upwards reporting. • Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. • Familiarity with mechanical testing equipment such as a borescope and various hand and power tools. • Must work well under pressure from job demands, multi-tasking ability essential. • Requires approximately 30% travel.Preference may be given to candidates with the following: • Masters degree in Mechanical Engineering • Experience in wind turbine drive train design or operations. • Experience with AGMA. • Ability to speak, write, and understand Spanish. Location: Portland, OR or ??? Compensation: Hiighly CompetitivePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Engineering Assistant (Salt Lake City) Salt Lake City 2009-06-09 8:55AM
Essential Functions: 1. Under the supervision of a registered Professional Engineer or other project manager, modifies and develops engineering plans and finds engineering solutions for problems in paving, drainage, water, wastewater, erosion control, traffic, communications, landfills, transfer stations, plant improvements, and other projects.2. Reviews and prepares technical reports, engineering designs, and construction or process specifications to ensure projects conform to departmental requirements and city, state and federal regulations.3. Communicates with other departments, citizens, consultants, contractors, and other government agencies to coordinate activities and provide information about projects. 4. Produces and maintains project records for use by department and outside agencies.5. Assists in developing scopes of work (i.e., tasks and milestones) and project budgets to forecast construction schedules and establish project objectives or process operation, optimization, and enhancements.6. Inspects and monitors construction or maintenance projects to ensure compliance with design specifications and contractual agreements.7. Performs related duties as assigned. Minimum Qualifications: (1) Accredited bachelor’s degree in engineering OR (2) accredited bachelor’s degree in engineering technology plus four years of active practice in engineering work (applying engineering design/analysis practices as an engineering drafter or design technician) OR (3) bachelor’s degree in mathematical, physical, or engineering science approved by letter from the Board of Professional Engineers plus four years of active practice in engineering work as described above. For more information about this position and to view other job openings, please visit website Location: Salt Lake CityPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Firmware Engineer (Draper) Draper DOE 2009-06-08 12:24PM
BS in Electrical Engineering, experience preferred in Firmware System Design, Embedded Code Development (C/C++ & Assembly), Testing & Debugging New and Existing Development, Programmable Logic Design, Digital/Analog Design. Great work environment, small engineering teams, wide variety of experience. Relocation assistance not available. E-mail resumes to resume@vpieng.com Location: Draper Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electrical Engineer (Draper) Draper DOE 2009-06-08 12:24PM
BS in Electrical Engineering, experience preferred in Embedded Systems, µController System, Digital/Analog, Power/Battery, EMI/EMC, Schematic Capture/Layout. Great work environment, small engineering teams, wide variety of experience. Relocation assistance not available. E-mail resumes to resume@vpieng.com Location: Draper Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Firmware Engineer (Draper, Utah) Draper, Utah $40-$60K 2009-06-08 3:01PM
Jr-level, right out of school or 1-2 years of experience.BS in Electrical Engineering, experience preferred in Firmware System Design, Embedded Code Development (C/C++ & Assembly), Testing & Debugging New and Existing Development, Programmable Logic Design, Digital/Analog Design. Great work environment, small engineering teams, wide variety of experience. Relocation assistance not available. Location: Draper, Utah Compensation: $40-$60KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Junior Electrical Engineer (Draper, Utah) Draper, Utah $45-$60K 2009-06-08 2:59PM
Jr-level, right out of school or 1-2 years of experience.BS in Electrical Engineering, experience preferred in Embedded Systems, µController System, Digital/Analog, Power/Battery, EMI/EMC, Schematic Capture/Layout. Great work environment, small engineering teams, wide variety of experience. Relocation assistance not available. Location: Draper, Utah Compensation: $45-$60KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electrical Controls Engineer (Salt Lake City, UT) Salt Lake City, UT Competitive, based on qualifications 2009-06-05 12:20PM
We have an immediate opening for an Electrical Controls Engineer to provide engineering support through different phases of a project, from conceptual engineering, procurement, construction, pre-operational testing & commissioning phases. You will be working in a challenging, team-oriented environment meeting critical project deadlines. We pay well and offer challenging, interesting work.You will be designing, commissioning and maintaining electrical, instrumentation and automation systems associated with processing plants, gas compression facilities, mining facilities and other related projects. You need a strong understanding of PLC ladder logic, digital and sequential logic programming methods, & process related closed-loop control systems; and knowledge of automation (PLC/DCS) and electrical system design, diagnosis & operation. Experience should include: Experience with control/automation system design, integration, and operation; Experience in PLC based system design and programming (Rockwell Automation experience preferred); Experience in developing and implementing Human-Machine-Interfaces (HMI). We would like you to have a BS degree in EE, EE Technology, or related field and five years of experience, and you must be willing to travel up to 50%. Location: Salt Lake City, UT Compensation: Competitive, based on qualificationsPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electronics Technician (Orem) Orem DOE 2009-06-04 12:17PM
Electronic TechnicianPowerStream is a small electronic design firm specializing in power supplies, DC/DC converters, battery chargers and battery packs.This position is for an electronics technician to help us in design and small-scale manufacturing.You should be able toread schematicssolderuse electronics test equipmenttroubleshooton occasion deal with customer phone calls over technical issuesRecruiters--please dont reply, we already know enough recruiters to handle our needs, thanks. Location: Orem Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
a few posit. avail (Salt Lake City) Salt Lake City - 2009-06-04 7:00PM
This is a data-entry job. Very easy and well paid. Work remotely at your own convenience and pace. Contact me via email to apply.Thanks Location: Salt Lake City Compensation: - Telecommuting is ok. This is a part-time job.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
AutoCAD Drafter (Bountiful, UT) Bountiful, UT Depending on experience - include salary expectations! 2009-06-04 4:41PM
A well tenured and established company is looking for a qualified AutoCAD Drafter to join their team.REQUIREMENTS* Must have 3+ years of AutoCAD Drafting experience* Must have experience with Rivit Architectural Software Program* Architectural and/or electrical background preferred This is a fantastic opportunity for the right candidate to join a great team and work to be trained as a designer. Salary is commensurate with experience. Interested candidates should submit their resume and salary expectations immediately for consideration. Location: Bountiful, UT Compensation: Depending on experience - include salary expectations!Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Design Engineers (Utah) Utah Open 2009-06-04 10:22AM
Need experienced design engineers with experience in Aerospace and Automotive designs. Auto CAD and PRO/Engineer preferred. Location: Utah Compensation: OpenPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Engineer Construction Manager (Salt Lake City,Utah) Salt Lake City,Utah Excellent Wages 2009-06-04 6:57AM
Construction Management ******Job Requirements: Responsible for overall field management of the construction projects or a specific project. This includes administration and coordination on mid to large size roadway, aviation and rail projects of a diverse and complex nature. Monitors activities of assigned staff for conformance with contractual requirements. Provides technical leadership for complex or unique assignments. Reviews construction for conformance to drawings, specifications and contract documents. May recommend changes to design. Read and Interpret complex contract documents. Monitor Contractor progress and compare with reviewed Progress Schedule. Mentor and train construction inspection staff. Collect data to brief Client on Project Issues and provide possible resolutions. Review and draft responses to Contractors correspondence as required. Prepare Summary Inspection Report of Daily Activities.************************************************************ REQUIRES__10 years civil construction experience in transportation, aviation and rail projects Professional Engineer License (PE) preferred but not mandatory UDOT CEMT certification is preferred but not mandatory Knowledge of UDOT’s construction program and PDBS software system is preferred Airfield construction preferred***************************************SEND RESUMES TO: MARY-HR DeptMgraham66@aol.com Location: Salt Lake City,Utah Compensation: Excellent WagesPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Engineer, Fluent Russian, Translator (Salt Lake City) Salt Lake City depends on experience 2009-06-03 4:11PM
Fluent Russian Engineer for periodic translation needs.This is not a part-time or full-time job. An individual with native Russian command of the language is required.Mechanical Engineer, Electrical Engineer or engineering student preferred.Previous translation experience not required.Work is on an as-needed, project/document basis.Work hours are very flexible.May involve some phone calls in Russian on behalf of the Company.Radius Engineering is in composites R&D / aerospace.Translation work involves technical terms related to aircraft parts, presses, injectors and related blueprints and software.We are located in Salt Lake City. Please send a cover letter outlining your credentials and your resume to staffing@radiuseng.com. Location: Salt Lake City Compensation: depends on experience Telecommuting is ok. This is a contract job.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
AutoCAD Drafter (West Valley City, Utah) West Valley City, Utah The position is paying between $16-$18 per hour, DOE. This position will be a 6 month contract, with a traditional 8-5, M-F schedule. There could be some OT, so a flexible schedule will be needed. 2009-06-03 11:04AM
The position that we are looking to fill is AutoCAD Drafter. The drafter will be responsible for generating drawings and maintaining/updating existing drawings. Duties will include maintaining a master library of drawings including documentation summarizing change history.Daily Responsibilities:• 2D and 3D drawings• Take 2D print and develop a 3D modelExperience/Education:• 2-3 years experience – No exceptions• Machine Shop experience• Mechanical Knowledge• Must have working knowledge of current AutoCAD and Drafting Software• A High School Diploma (Required)• Some Technical College and/or Associates degree in related field (preferred)**resume is required along with a cover letter and Drawing that you have worked on. Pay will somewhat be determined off of that drawing, which will help determine skill level**The position is paying between $16-$18 per hour, DOE. This position will be a 6 month contract, with a traditional 8-5, M-F schedule. There could be some OT, so a flexible schedule will be needed. Please Send Resumes To:David.Anderson@bbsihq.comList Job Name in Subject Line of EmailOr call 801-417-8010 for more informationYou can also fax in resume at 801-417-8011Attn: Job Title you are applying for Location: West Valley City, Utah Compensation: The position is paying between $16-$18 per hour, DOE. This position will be a 6 month contract, with a traditional 8-5, M-F schedule. There could be some OT, so a flexible schedule will be needed. Principals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
Senior Quality Engineer (Salt Lake City) Salt Lake City $85K-$95K Base salary, bonus opportunities, full benefits 2009-06-02 7:29PM
Our client is expanding their Salt Lake City division & seeks a Senior Quality Engineer to: *Ensure quality for FDA products by supporting R&D and manufacturing *Create and validate test equipment and assess all internal and external quality systems *Develop new product development testing methods & ensure controls as required by FDA Qualified applicants must possess a minimum of: *a Bachelors degree in Engineering *Five or more years of design control experience within a FDA environment *Strong written and verbal communication skills *Medical manufacturing experience is a plus Location: Salt Lake City Compensation: $85K-$95K Base salary, bonus opportunities, full benefitsPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Conveyor / Sales Engineer (Salt Lake City, Utah) Salt Lake City, Utah DOE 2009-06-02 4:42PM
Required:Structural or Mechanical Engineer 5 +years of experience working with Conveyors. Project Management experience Well Rounded personality – ability to interact with Clients and help them find solutions to their needs. 5 years of experience with AutoCad (industry specific) Desired:PE Solid WorksInterview Process:Meet with Tim and if that goes well come back and meet with a PM Day to Day:The engineer would be in charge of working with either existing cliental or new leads in finding solutions for their conveyor/warehouse needs. They would then send out bids and design the work from start to end.Relocation:Yes Any questions please call ed at 801-208-3700 or email epowell@consultnet.com Location: Salt Lake City, Utah Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electrical Engineer (Salt lake city) Salt lake city 60 to 80k 2009-06-02 2:49PM
BS EE or related field• Circuit design• PCB layout• Microcontroller based designWish list: Instrumentation or electro-mechanical design• Medical device design• Design control/GMP/ISO exp• Embedded firmware• Altium layout for PCB• Program C or C++• Signal processing• Control systems• Optics• Production/mfg exp• Product developement• De-bugContact Chris@ 801-577-6976 Location: Salt lake city Compensation: 60 to 80kPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
Product Engineer Manager (Salt Lake City) Salt Lake City 70-80K DOE 2009-06-02 9:58AM
Eimco Water Technologies is the Water Treatment Group of GLV Inc., a leading global provider of solutions in Water Treatment and Pulp & Paper production. www.glv.com We are present in some 30 countries with close to 1700 employees.Eimco Water Technologies is located in Salt Lake City and specializes in the Design, Build, Operation and/or maintenance of solutions for the treatment and recycling of Municipal and Industrial wastewater. The Group is also a World leader in water intake screening solutions for the Power, Desalination and Petrochemical Industries. A key focus for Eimco Water Technologies is sustainability. We strive for sustainability in all activities including energy efficiency, renewable energy from wastewater and water re-use solutionsPlease refer to posting number: SLC303Please email resumes in WORD format to: ewtslc.hr@glv.com JOB SUMMARY Responsible for supporting the assigned marketing organization with required sales support, materials and quotations to assist in meeting their sales objectives. Also assists in maintaining profitability of booked orders. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. * Work within a cross-functional team environment with Engineering, Project Management and Marketing to achieve sales objectives and acceptable profit margins. * Provide recommendations on product application and sizing, specifications, specification reviews, general arrangement drawings, pricing and other sales aid materials as required to support customer needs. * Provide direct field sales support in such activities as specification review, customer presentations, product application and sizing, process start-up and technical training. Recognized product expert. * Evaluate market trends and recommend promotional sales support activities. * Help develop sales aids such as brochures, technical data and catalogs. * Define product improvements and standardizations, and recommend new product development. * Review submittals from customers to ensure conformance to what was bid. * Provide specific equipment information to Engineering. EDUCATION AND EXPERIENCEB.S. degree in one of the engineering disciplines is required. M.S. degree in an engineering discipline or Professional Engineer certificate is preferred.A minimum of three to five years of directly applicable technical and sales experience is also required.LANGUAGE SKILLSAbility to read, analyze, and interpret complex industry related documents.Ability to respond effectively to sensitive inquiries and complaints.Ability to take understand and both read, write and converse in English and at advanced level.Must be able to communicate verbally and in writing on a technical level and make formal presentations. Must be proficient with personal computer using company standard software.Must have demonstrated interpersonal and customer relations skills. MATHEMATICAL SKILLSAbility to understand and apply basic mathematical concepts such as addition, subtraction, multiplication, and division. Ability to apply advance mathematical equations to a variety of complex, non-standard situations. REASONING ABILITYAbility to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. OTHER SKILLS AND ABILITIESKnowledge of Eimco Water Treatment Sedimentation products and associated equipment.Computer skills are essential – proficiency in Word, Excel, and Syteline application programs desired. PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job. The employee is regularly required to talk or hear. The employee frequently is required to walk, sit, use hands and fingers to handle, or feel; and reach with hands and arms. The employee is occasionally required to stand. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate.ainability in all activities including energy efficiency, renewable energy from wastewater and water re-use solutions. Location: Salt Lake City Compensation: 70-80K DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Industrial Hygienist (SLC) SLC 60-80K 2009-06-02 9:53AM
A local, mid-size refinery is seeking a Industrial Hygienist with a minimum of five years of experience in the petrochemical industry to work at its Woods Cross, Utah location. Responsibilities will include:REQUIREMENTS- A minimum of 5 years in the Petrochemical Industry- Safety, Fire/EMT experience preferred- A Bachelor of Science Degree in Safety, Fire Protection, or Industrial Hygiene or a related field is preferred, but training and related experience may be considered.- Other preferred specialized training includes: Industrial Fire Fighting; High Angle and Confined Space Rescue; Hazmat; EMT.Please submit your resume and salary expectations via this posting. Location: SLC Compensation: 60-80KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Project Engineer I (Salt Lake City, UT) Salt Lake City, UT 55-65K DOE 2009-06-02 9:49AM
Eimco Water Technologies is the Water Treatment Group of GLV Inc., a leading global provider of solutions in Water Treatment and Pulp & Paper production. www.glv.com. We are present in some 30 countries with close to 1700 employees worldwide.Eimco Water Technologies is located in SLC, UT and specializes in the Design, Build, Operation and/or maintenance of solutions for the treatment and recycling of Municipal and Industrial wastewater. The Group is also a World leader in water intake screening solutions for the Power, Desalination and Petrochemical Industries.A key focus for Eimco Water Technologies is sustainability. We strive for sustainability in all activities including energy efficiency, renewable energy from wastewater and water re-use solutions.Please refer to posting number: SLC340Please email resumes in WORD format to: ewtslc.hr@glv.comSUMMARYResponsible for the engineering and design of the equipment for the Carrousel group. This person completes assigned activities under the direction of a more senior level individual and reports to Project Engineer III. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. 1. Performs design calculation and analyses’ design to ensure project success, develops 3D models and submittal, assembly and fabrication drawings 2. Applies best engineering principals to all work performed 3. Adheres to advice from more senior peers and advises peers and supervisors when issues arise. 4. Responsible for providing prompt feed back when a problem is found 5. Responsible for completion of assigned tasks to be completed on time. 6. Performs all work in accordance with established safety procedures. 7. Other duties may be assigned as required.EDUCATION AND EXPERIENCEBachelors degree in Mechanical/Civil Engineering from an accredited University or, a minimum of 6 years directly related experience. Must have knowledge of AutoCAD and some experience using a 3D modeling software. Mechanical aptitude and experience required and a knowledge of water and waste water equipment a plus. Knowledge of MS office products. LANGUAGE SKILLSAbility to read, analyze, and interpret complex industry related documents.Ability to respond effectively to sensitive inquiries and complaints.Ability to understand and both read, write and converse in English and at advanced level. MATHEMATICAL SKILLSAbility to understand and apply basic mathematical concepts such as addition, subtraction, multiplication, and division. Ability to apply advance mathematical equations to a variety of complex, non-standard situations REASONING ABILITYAbility to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.Ability to make decisions requiring the use of a variety of variables in non-standard situations. OTHER SKILLS AND ABILITIESKnowledge of metal fabrication, machining, welding etc.Knowledge in design for production, drafting principals etc.Experience in CAD software especially 3D Modeling applications.Computer skills are essential – proficiency in Word and Excel are desired. PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job. The employee is regularly required to talk or hear. The employee frequently is required to walk, sit, use hands and fingers to handle, or feel; and reach with hands and arms. The employee is occasionally required to stand. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to moving mechanical parts. The employee may be exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Location: Salt Lake City, UT Compensation: 55-65K DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Mechanical Engineer (SLC) SLC 75-85K 2009-06-02 9:48AM
Currently seeking a mechanical engineer to join a growing firm in SLC, in the area of Energy Efficiency and Energy Management.Specific responsibilities will include: performing energy engineering services for clients, reviewing energy efficiency, recommissioning projects, on-site field inspections, installing field monitoring equipment, conducting energy audits, performing comprehensive energy modeling, and performing other related tasks.Experience & EducationBachelors or masters degree in mechanical engineeringAt least 5 to 7 years building system design experience including HVAC, controls, and pipingProfessional engineer license strongly preferred (or be on track to obtain a license)Client contact and relationship experienceStrong verbal and written communications skills, including report and presentation preparationExcellent interpersonal and analytical skillsExperience with Department of Energy modeling tools such as eQuest DOE 2.2 is preferredFamiliarity with ASHRAE 90.1 2004 and 2007 and IECC 2006 Location: SLC Compensation: 75-85KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Electrical Power Engineer (Salt Lake City, UT) Salt Lake City, UT Compensation based upon experience. We offer very competitive bonus and benefit programs. 2009-06-01 6:39AM
The Dennis Group LLC, a national Engineering and Construction Management firm headquartered in Springfield, MA with offices in Salt Lake City & San Diego is seeking high performance candidates for the following: Electrical Engineer (power) • 5 - 10 years experience • Lighting systems • Power distribution • Service entrance /switchgear • Motor Control Centers • License preferred (EE) The successful candidates will be professional, self-motivated, energetic and enthusiastic with excellent communication and inter-personal skills. We offer a stimulating work environment with competitive salary & benefits and opportunities for adventure and advancement. Location: Salt Lake City, UT Compensation: Compensation based upon experience. We offer very competitive bonus and benefit programs.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Façade Production Design Engineer (West Valley City ) West Valley City DOE 2009-05-29 5:31PM
An international leader in Rainscreen Cladding systems (Metal and Terracotta) offers the position of a Façade Production Design Detailer. POHL has been in business since 1856 and employs approx 550 people in fabrication plants in Germany, Poland and the USA. POHL specializes in the Engineering and fabrication of custom made Architectural panel systems.In order to continue our growth, we have an opening for a Facade Detailer. This person will report directly to our Chief Engineer and support our Engineering and Sales team.Position Summary: Develops, organizes and implements the drafting standards necessary to efficiently prepare shop drawings to our customer’s expectations. Reviews project proposal or plan, customer’s scope and project specification to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements and allotment of available resources to each phase of project. The following qualifications/experience are required:• Technical knowledge of façade systems• Excellent interpretation of complex Architectural drawings• Ability to check fabrication drawings• Panel take-offs• AUTOCAD latest version• 5 years Drafting Experience of Metal panel systems• Good communication skills• Understanding a capability to draw in 3DQualified candidates are encouraged to email their resume for consideration of the position. Location: West Valley City Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Design and Build Mobile Shelving System salary or profit split 2009-05-29 10:47AM
Design and Build Mobile Shelving System We sell mobile shelving. Please see this page for pictures and description. Keep in mind we can purchase the shelving. We need the rolling bases, tracking system and gear drive system. http://www.nationwideshelving.com/mobile-shelving.php We would like to partner with an engineer to engineer/design this product so it can be easily manufactured in our shop. Please respond to this ad via email. No phone call please. Thanks very much and much success to you! Compensation: salary or profit splitPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Sr. Engineers--ME and Quality (Salk Lake City) Salk Lake City 80000-110000 2009-05-28 11:28AM
Ascent is actively recruiting for several engineering opportunities throughout the Salt Lake Valley. Our clients offer 401K AND pension plans, stock participation, educational assistance and relocation for out of state candidates. At present we are interviewing candidates with mechanical or quality engineering disciplines ideally with biotech, medical device or pharmaceutical industry experience. Chosen candidates can count on growth and stability with these opportunities. Please contact Bruce Hancey at Ascent Executive Search directly, 801-272-9300 or email a resume to bruceh@ascentsearch.com. Location: Salk Lake City Compensation: 80000-110000Principals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
Mechanical Engineer (Salt Lake City) Salt Lake City $40k 2009-05-28 10:48AM
Mechanical Engineer needed for drilling company. Some experience preferred. Position will include estimating, mechanical design, and troubleshooting. Some experience with hydraulics needed. Need to be willing to travel. Some benefits included. $40,000/start Location: Salt Lake City Compensation: $40kPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Systems Engineer (Salt Lake City, UT) Salt Lake City, UT 80-95K based on experience 2009-05-28 10:27AM
OVERVIEW Product teams for the clients product typically consist of an Electrical Engineer, a Mechanical Engineer, a Software Engineer, and a Systems Engineer. The Systems Engineer needs to be a generalist, but can come from any of the 3 backgrounds (ME, EE, or SE). REQUIRED BS in EE, ME, CS, or similar 5+ years experience as a generalist - ie, must have experience working closely with the other 2 types in a group, to tie everything together. Ability to make bright people gel - acts as the informal project lead in the team Strong analytical skills If ME - needs to have 3d Modelling experience If SW Eng - needs to have experience with scientific, data-driven development BONUS Inline Pipe Inspection experience DESIRED MS Degree SOFT SKILLS Able to work largely unsupervised Ability to work in a collaborative environment with other engineers Can either work quite a bit with clients or not, depending on preference Someone who likes to own the project Bright, flexible, and able to grasp ideas quickly OFFICIAL JOB DESCRIPTION Summary of Systems Engineer: We are seeking a talented multi-disciplinary engineer to join our inline inspection systems group, developing new technologies used to inspect pipeline systems worldwide. Primary Responsibilities: - Conceptualizes and designs In-Line Inspection tools. - Provides technical support to world-wide In-Line Inspection sales, manufacturing, and customer service groups regarding product and service applications, support, and complaint resolution. - Addresses technical problems by inventing solutions or changing system design. - Improves technical knowledge of department through on the job application and leverage of customer specific engineered solutions, participation in professional and industry trade organizations, reviewing technical papers/literature and attending appropriate seminars and workshops with the intent of applying the latest technology to both existing and new products. - Reviews work of self and others to ensure systems are designed with minimum complexity and maximum result. Ideal Candidates will Possess: - BS in an engineering field and at least 5 years experience. - Strong analytical and communication skills. - Ability to collaborate with many different technical disciplines. - Multidisciplinary design skills, including: o Mechanical design and analysis; SolidWorks experience is a plus. o Familiarity with electronic systems, including sensors and data acquisition. o Experience programming for data analysis purposes. MATLAB, Labview, or C/C++ familiarity is a plus. Preference will be given to candidates with experience in: - Permanent magnet design and analysis - Ultrasonic inspection techniques - Nondestructive testing - Inertial systems Location: Salt Lake City, UT Compensation: 80-95K based on experiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
HVAC/Plumbing Mechanical Engineer or Designer (Reno, NV) Reno, NV Wages and benefits are depending on experience. 2009-05-27 12:56PM
HVAC/Plumbing Mechanical Engineer or Designer Mechanical Designer with a well rounded understanding of mechanical systems, required calculations, governing codes and mechanical consulting services for our Reno, NV office. Our company is growing and we are looking for experienced and motivated team members interested in advancing the company and working on interesting projects. This position requires residency in Reno NV .Types of system designs we get involved with:*** Do not submit if your resume does not show HVAC and Plumbing design experience***• Heating, ventilating, and air conditioning (HVAC) for institutional, commercial, and industrial applications • Central plants (boilers/chillers) • We are looking for an experienced HVAC/Plumbing Professional Engineer or Co-generation systems • Steam heating and process • Underground utilities and utility distribution • Vehicle and workshop exhaust source capture extraction systems • Fire protection performance designs including automatic fire sprinkler systems, aqueous film forming foam (AFFF) fire suppression and clean-agent dry fire suppression • Plumbing systems including fuels (gaseous and liquid), domestic water, and drain/waste/vent • Special waste handling--sand-and-oil interceptors and waste oil collection and storage • Type I and Type II kitchen hood ventilation for commercial applications • Backflow prevention assemblies • Medical gases • Air tank breathing-air filling stations • Compressed air systems • Process piping • Underground and above grade fuel storage tanks, dispensing facilities and appurtenances • Generator fueling and ventilation • Automatic hand-pump assemblies for emergency generator systems • Hydronic snowmelt for walkways, driveways and building entrances • Direct Digital Control (DDC) Systems • Energy management (building energy control) • Energy audits and efficiency evaluations Minimum Experience Requirements: • Mechanical HVAC and plumbing system designer • Bachelor of Science in Mechanical Engineering Preferred • Project management experience • Heat Load Calculations and Energy Analysis • Solid understanding of governing mechanical, plumbing and energy codes • Specification and cost estimating experience • Construction Administration/Support Experience Computer Experience Requirements:• AutoCad 2009 proficiency • Revit MEP preferred • Trace 700 Load and Energy Analysis • MS Office • MS Excel Please submit your resume via email to: lori@dinter.com or call for questions 775-682-4620Wages and benefits are depending on experience.http://www.dinter.com/careers_reno.shtml Location: Reno, NV Compensation: Wages and benefits are depending on experience. OK to highlight this job opening for persons with disabilitiesPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
Design and Build Mobile Shelving System salary or profit split 2009-05-27 12:09PM
Design and Build Mobile Shelving System We sell mobile shelving. Please see this page for pictures and description. Keep in mind we can purchase the shelving. We need the rolling bases, tracking system and gear drive system. http://www.nationwideshelving.com/mobile-shelving.php We would like to partner with an engineer to engineer/design this product so it can be easily manufactured in our shop. Please respond to this ad via email. No phone call please. Thanks very much and much success to you! Compensation: salary or profit splitPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Mineral Processing Engineer (SLC) SLC 70-100k 2009-05-27 3:15PM
Sr. Application Engineer with experience in mineral processing equipment design. Will be responsible for researching and implementing new equipment designs put forth by the President and Sales Teams. Review specs, design criteria, mass balances and flow sheet development. Will also work as part of a team providing consultative advice as to development of layouts and assistance with eqiupment such as crushers, conveyors, screens, cyclones, griding mills, pumps, flotation equipment, liquid-solid separation equipment, process agitators, etc. Must have Bachelors of Science degree in Mning or Chemical Engineering, a Professional Engineering Designation and at least 10 years experience in the Mineral Processing Industry, operations and site experience, highly motivated with the ability to work as a leader. Location: SLC Compensation: 70-100k Telecommuting is ok.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Systems Engineer (Salt Lake City, UT) Salt Lake City, UT DOE...will be very competitive 2009-05-27 11:17AM
Just received new job opening for a Systems Engineer. This is a direct hire position, the ideal candidate would be a multi-disciplinary engineer. Here is the job description: OVERVIEWProduct teams for the clients product typically consist of an Electrical Engineer, a Mechanical Engineer, a Software Engineer, and a Systems Engineer. The Systems Engineer needs to be a generalist, but can come from any of the 3 backgrounds (ME, EE, or SE). Must be a US Citizen. REQUIREDBS in EE, ME, CS, or similar5+ years experience as a generalist - ie, must have experience working closely with the other 2 types in a group, to tie everything together.Ability to make bright people gel - acts as the informal project lead in the teamStrong analytical skillsIf ME - needs to have 3d Modelling experienceIf SW Eng - needs to have experience with scientific, data-driven development BONUSInline Pipe Inspection experience DESIREDMS Degree SOFT SKILLSAble to work largely unsupervisedAbility to work in a collaborative environment with other engineersCan either work quite a bit with clients or not, depending on preferenceSomeone who likes to own the projectBright, flexible, and able to grasp ideas quickly INTERVIEW PROCESSThe manager is out of town 6/1-6/9. Will give feedback on resumes while gone and well do the HR interview during that time (ie, 2 will be first for candidates sent in the next couple of days)1 - One-on-one onsite interview w/ the manager2 - 1-hr onsite interview w/ HR3 - Will give a small presentation on something theyve done in the past and meet with the team. 1 and 3 may be combined depending on availability/the candidate/etc.Please send resume to epowell@consultnet.com any questions call 801-208-3700 ask for Ed. Location: Salt Lake City, UT Compensation: DOE...will be very competitivePrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
PROJECT SAFETY COORDINATOR (Wyoming) Wyoming Salary Range 2009-05-27 8:14AM
PROJECT SAFETY COORDINATOR10 - 15+ years as a Project Safety Oordinator.Qualified Project Safety Coordinators with a minimum of 10-15 years experience of on-site safety management of heavy industrial / chemical / utility projects. Position requires knowledge and understanding of OSHA, as well as ensuring construction workers are following the safety rules and regulations required by an Owner. Computer skills are required.This position is a temporary position for approximately 2 – 3 years.Location of job is in WyomingSalary Range: $35.00 to $40.00 per hour + $70.00 a day for expenses.Please email your resume in a Microsoft WORD doc. to the attention of Mr. Kevin Marteny Technical Recruiting Manager. Location: Wyoming Compensation: Salary Range: $35.00 to $40.00 per hour + $70.00 a day for expenses.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Entry/Junior/Mid-Level Environmental Engineer (Salt Lake City, Utah) Salt Lake City, Utah Competitive Salary 2009-05-27 8:09AM
ENTRY/JUNIOR/MID-LEVEL ENVIRONMENTAL ENGINEERMillennium Science & Engineering, Inc. (MSE) is seeking entry/junior-level and mid-level engineers to join its Salt Lake City, Utah operations. This position will support project managers on a variety of site characterization, remediation, abandoned mine lands, water resource and regulatory compliance projects. In addition, we are looking for candidates with a willingness to support field operations both locally and out of state.QualificationsThe ideal candidate would have: · A bachelors degree in environmental engineering, civil engineering or geotechnical engineering;· 1 to 8 years experience in environmental consulting; · Strong analytical, writing, communication and basic computer skills;· A willingness to spend time in the field (some out of state travel required); · The ability to take direction from several senior personnel and support multiple projects; · U.S. citizenship;· The capacity for increasing levels of responsibility; and· Ability to obtain P.E. license.Motivated individuals with environmental sampling, hydrogeology, mining, water/wastewater, air quality, Auto CAD, computer modeling or project management experience may be given special consideration. BenefitsA competitive salary and benefits package is offered to full time employees, including: · Medical and Dental Plans · Health Care Flexible Spending Account · Short Term and Long Term Disability Income · Retirement Plan with company match · Paid Vacation· Paid Holidays · Business Casual Dress MSE is an employee-owned international environmental science and engineering company providing professional consulting services to industrial, military and governmental clients worldwide, including:· Environmental Site Assessments and Auditing· Remediation Design, Engineering, Construction and O&M· Water and Wastewater Engineering· Water Resource Planning (including watershed and TMDL studies)· Environmental Management and Compliance Programs· International Project DevelopmentSubmit resume to canelson@mse-environmental.com for consideration. Location: Salt Lake City, Utah Compensation: Competitive SalaryPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Systems Engineer (Salt Lake City, Utah) Salt Lake City, Utah Depending on Experience 2009-05-27 7:41AM
Systems EngineerSalt Lake City, UT, United StatesEngineering DepartmentT.D. Williamson, Inc. (TDW), is the premier piping maintenance company in the oil and gas industry. We design and manufacture engineered solutions for monitoring, pigging, tapping, plugging, and inspecting essential piping systems. In addition to providing these services, our organization is constantly looking for opportunities to tap into new technologies, increase market share, and grow revenue. TDW MAGPIE®, located in Salt Lake City, Utah, specializes in Magnetic Pipeline Inspection Systems for the Petroleum industry. We are experiencing growth in both our domestic and global operations. We design, build, and operate some of the world’s finest high-tech inspection tools to help pipeline operators assess the condition of their pipelines.As a growing company, TDW is seeking an energetic and talented systems engineer who is interested in cutting edge technology to join our fast-pace, collaborative, technologically advanced organization.Summary of Systems Engineer:We are seeking a talented multi-disciplinary engineer to join our inline inspection systems group, developing new technologies used to inspect pipeline systems worldwide.Primary Responsibilities: - Conceptualizes and designs In-Line Inspection tools.- Provides technical support to world-wide In-Line Inspection sales, manufacturing, and customer service groups regarding product and service applications, support, and complaint resolution. - Addresses technical problems by inventing solutions or changing system design.- Improves technical knowledge of department through on the job application and leverage of customer specific engineered solutions, participation in professional and industry trade organizations, reviewing technical papers/literature and attending appropriate seminars and workshops with the intent of applying the latest technology to both existing and new products.- Reviews work of self and others to ensure systems are designed with minimum complexity and maximum result.Ideal Candidates will Possess:- BS in an engineering field and at least 5 years experience.- Strong analytical and communication skills.- Ability to collaborate with many different technical disciplines.- Multidisciplinary design skills, including:- Mechanical design and analysis; SolidWorks experience is a plus.- Familiarity with electronic systems, including sensors and data acquisition. - Experience programming for data analysis purposes. MATLAB, Labview, or C/C++ familiarity is a plus.Preference will be given to candidates with experience in:- Permanent magnet design and analysis- Ultrasonic inspection techniques- Nondestructive testing- Inertial systemsWe offer an excellent work environment, opportunities for growth, a competitive wage and a comprehensive benefits package.Our benefits package includes, but is not limited to, the following: medical, dental, vision, life insurance, supplemental life insurance, LTD, STD, pension plan, 401(k) with company match, paid leave, educational assistance, and a bonus program. To learn more about our company, visit our website: www.tdwilliamson.com. T.D. Williamson, Inc. is an equal opportunity employer. Interested and qualified applicants should send their resume via email or fax to: E-mail: hr@tdwilliamson.comFax: 801-747-1506All materials will be kept in strictest confidence. Location: Salt Lake City, Utah Compensation: Depending on Experience OK to highlight this job opening for persons with disabilitiesPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Entry Level Drafters in Salt Lake - $16/hour! (Salt Lake City, UT) Salt Lake City, UT Up to $16/hour 2009-05-26 1:57PM
CAD Drafter needed with experience in machined parts and assemblies. Training with either Pro/E or Mechanical Desktop is a plus, but not required to apply. This is an entry level position. Location: Salt Lake City, UT Compensation: Up to $16/hourPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Safety/Fire Protection Professional (SLC) SLC 60-80K 2009-05-26 11:02AM
A local, mid-size refinery is seeking a Safety/Fire Protection Professional with a minimum of five years of experience in the petrochemical industry to work at its Woods Cross, Utah location. Responsibilities will include: - Coordinate emergency response teams for the facility - Coordinate or conduct periodic safety and fire equipment inspections - Development of safety and emergency response team policies and procedures - Provide consultation and recommendations for safety, fire protection and emergency response issues - Conduct employee safety and emergency response team training - Coordinate or conduct safety, fire and emergency response team audits - Issue hot work and confined space permits. - Must be available for weekend and after hour call-outs. Candidate must have the ability to work in an industrial environment, including, but not limited to chemicals, pressure vessels, tanks and rotating equipment. Must be willing and able to perform outdoor duties under wet and/or oil contaminated conditions, at both below grade and elevated positions. The candidate should have good organizational and oral and written communications skills. In addition, the candidate should have intermediate computer skills with basic office software and be able to satisfactorily complete a comprehensive medical physical examination. POSITION REQUIREMENTS (Resumes without the below experience will not be considered): - A minimum of 5 years in the Petrochemical Industry - Combination of BOTH Safety and Fire/ERT experience required - A Bachelor of Science Degree in Safety and/or Fire Protection or a related field is preferred, but training and related experience may be considered. - Other preferred specialized training includes: Industrial Fire Fighting; High Angle and Confined Space Rescue; Hazmat; EMT, Industrial Hygiene. Please submit your resume and salary expectations via this posting. Location: SLC Compensation: 60-80KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Safety/Fire Protection Professional (SLC) SLC 60-80K 2009-05-20 9:54AM
A local, mid-size refinery is seeking a Safety/Fire Protection Professional with a minimum of five years of experience in the petrochemical industry to work at its Woods Cross, Utah location. Responsibilities will include: - Coordinate emergency response teams for the facility - Coordinate or conduct periodic safety and fire equipment inspections - Development of safety and emergency response team policies and procedures - Provide consultation and recommendations for safety, fire protection and emergency response issues - Conduct employee safety and emergency response team training - Coordinate or conduct safety, fire and emergency response team audits - Issue hot work and confined space permits. - Must be available for weekend and after hour call-outs. Candidate must have the ability to work in an industrial environment, including, but not limited to chemicals, pressure vessels, tanks and rotating equipment. Must be willing and able to perform outdoor duties under wet and/or oil contaminated conditions, at both below grade and elevated positions. The candidate should have good organizational and oral and written communications skills. In addition, the candidate should have intermediate computer skills with basic office software and be able to satisfactorily complete a comprehensive medical physical examination. POSITION REQUIREMENTS (Resumes without the below experience will not be considered): - A minimum of 5 years in the Petrochemical Industry - Combination of BOTH Safety and Fire/ERT experience required - A Bachelor of Science Degree in Safety and/or Fire Protection or a related field is preferred, but training and related experience may be considered. - Other preferred specialized training includes: Industrial Fire Fighting; High Angle and Confined Space Rescue; Hazmat; EMT, Industrial Hygiene. Please submit your resume and salary expectations via this posting. Location: SLC Compensation: 60-80KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Design and Build Mobile Shelving System Profit Split 2009-05-20 9:10AM
Design and Build Mobile Shelving System We sell mobile shelving. Please see this page for pictures and description. Keep in mind we can purchase the shelving. We need the rolling bases, tracking system and gear drive system. http://www.nationwideshelving.com/mobile-shelving.php We would like to partner with an engineer to engineer/design this product so it can be easily manufactured in our shop. Please respond to this ad via email. No phone call please. Thanks very much and much success to you! Compensation: Profit SplitPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
3D Modeling in INVENTOR (downtown slc) downtown slc Compensation will be determined upon understanding skillsets, total hours, etc. 2009-05-20 7:14AM
We are seeking a part-time contract position for someone who owns INVENTOR and a LAPTOP / Workstation who can prepare 3D renderings/models of our proposed renewable energy plants (bio-refineries). Location: downtown slc Compensation: Compensation will be determined upon understanding skillsets, total hours, etc. Telecommuting is ok. This is a part-time job. This is a contract job.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Bridge Engineer III (Lehi, Utah) Lehi, Utah Based Upon Qualifications 2009-05-19 4:41PM
The HNTB Companies is a leading national architecture, engineering, planning and construction management firm with an outstanding opportunity for an individual to join our Lehi, Utah office as a Structural Engineer working on the I-15 Corridor improvement program.HNTB is known throughout the industry for employing quality individuals and performing quality work. The Lehi office is seeking a qualified individual to add to its dynamic team that wants to take ownership in their work, ownership of their career path(s), and has a passion for success. The successful candidate for this position will: • Be fully competent to complete structural bridge design and design oversight efforts with minimal direction. • Be familiar with current design codes, criteria and methodologies. • Actively participate in the design and design oversight process to ensure that requirements, constraints and desires are clearly understood and met. • Coordinate preparation and/or review of design details, plans, drawings and documentation within assigned task areas. • Help supervise, schedule and check work of project team members. • Work closely with other disciplines on multi-discipline projects. Be responsible for productivity and collaboration with team members for execution within time and budget constraints. • Be co-located with client in Lehi office. Qualifications• Bachelors Degree in Civil Engineering • Minimum of 5 years of experience • Utah Professional Engineer (PE) license required (Or ability to obtain)• Microstation experience highly desiredTo apply please visit our website www.hntbcareers.com and reference position 09-0422The HNTB Companies are an Equal Opportunity Employer – M/F/V/DHNTB does not accept resumes from unsolicited third party agencies or recruiters. No fees will be paid to third parties who submit unsolicited candidates in this manner. Location: Lehi, Utah Compensation: Based Upon QualificationsPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Inspector II (Salt Lake City) Salt Lake City Based Upon Qualifications 2009-05-19 4:41PM
For nearly a century, HNTB has helped create infrastructure that best meets the unique demands of its environment. With client relationships spanning decades, we understand infrastructure life cycles and have the perspective to solve technical challenges with clarity and imagination. We see and help address far-reaching issues of financing, legislation, design, construction, community outreach and ongoing operations. As employee-owners committed to the highest levels of performance we enable clients to achieve their goals and inspiring visions.The time is right to join HNTB Corporation. We are seeking candidates for an Inspector II in our Salt Lake City, Utah office. Job Requirements: • Responsible for providing daily inspection of civil construction work to ensure that the project complies with plans, specifications and contract documents. • Observes construction on mid to large size roadway, aviation and rail projects and sees that the clients interests are protected. • Maintains daily logs of inspection work and reviews discrepancies or changes with Field Engineer. • Keep diaries of work performed and staff equipment utilized. Responsible for quality assurance and monitors work of contractors. • Keep superiors advised of problem areas. • Performs standard mathematical calculations. • Reads and interprets complex contract documents. Qualifications:• Minimum of 2 years civil construction experience in transportation, aviation and rail projects. • Knowledge of UDOT’s construction program required • PDBS software system is helpful. • Airfield construction and paving experience is preferred. To apply please visit our website www.hntbcareers.com and reference position 09-0463The HNTB Companies are an Equal Opportunity Employer – M/F/V/DHNTB does not accept resumes from unsolicited third party agencies or recruiters. No fees will be paid to third parties who submit unsolicited candidates in this manner. Location: Salt Lake City Compensation: Based Upon QualificationsPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Resident Engineer (Salt Lake City) Salt Lake City Based Upon Qualifications 2009-05-19 4:40PM
For nearly a century, HNTB has helped create infrastructure that best meets the unique demands of its environment. With client relationships spanning decades, we understand infrastructure life cycles and have the perspective to solve technical challenges with clarity and imagination. We see and help address far-reaching issues of financing, legislation, design, construction, community outreach and ongoing operations. As employee-owners committed to the highest levels of performance we enable clients to achieve their goals and inspiring visions.The time is right to join HNTB Corporation. We are seeking candidates for a Resident Engineer in our Salt Lake City, Utah office. Job Requirements: • Responsible for overall field management of HNTBs construction projects or a specific project. This includes administration and coordination on mid to large size roadway, aviation and rail projects of a diverse and complex nature. • Monitors activities of assigned staff for conformance with contractual requirements. • Provides technical leadership for complex or unique assignments. • Reviews construction for conformance to drawings, specifications and contract documents. May recommend changes to design. • Represents HNTB at projects meetings and site visits. • Read and Interpret complex contract documents. • Monitor Contractor progress and compare with reviewed Progress Schedule. • Mentor and train construction inspection staff. • Collect data to brief Client on Project Issues and provide possible resolutions. • Review and draft responses to Contractors correspondence as required. • Prepare Summary Inspection Report of Daily Activities. Qualifications:• 10 years civil construction experience in transportation, aviation and rail projects • Professional Engineer License (PE) preferred but not mandatory • UDOT CEMT certification is preferred but not mandatory • Knowledge of UDOT’s construction program and PDBS software system is preferred • Airfield construction preferredTo Apply please visit www.hntbcareers.com and apply to position 09-0462The HNTB Companies are an Equal Opportunity Employer – M/F/V/DHNTB does not accept resumes from unsolicited third party agencies or recruiters. No fees will be paid to third parties who submit unsolicited candidates in this manner. Location: Salt Lake City Compensation: Based Upon QualificationsPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Design and Build Mobile Shelving System Profit Split 2009-05-19 10:43AM
Design and Build Mobile Shelving System We sell mobile shelving. Please see this page for pictures and description. Keep in mind we can purchase the shelving. We need the rolling bases, tracking system and gear drive system. http://www.nationwideshelving.com/mobile-shelving.php We would like to partner with an engineer to engineer/design this product so it can be easily manufactured in our shop. Please respond to this ad via email. No phone call please. Thanks very much and much success to you! Compensation: Profit SplitPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Senior Embedded Software Engineer 94-95 (Sandy, UT) Sandy, UT Negotiable - DOE 2009-05-18 12:29PM
POSITION SUMMARYHeres an awesome opportunity for an innovative, experienced Software Engineer. We are creating a future Center of Excellence for audio and video. We will be developing high end products for Harman. Dont wait! This opportunity will go fast. We are facing critical deadlines for product roll out and delivery. Be part of an innovative, development team. Submit your resume in word format to jackie.riley@harman.com with salary history. This is the highest level engineering position responsible for designing, developing and troubleshooting software programs for computer based systems. For more information, or to apply now, you must go to the website below. Please do not email your resume to us as we only accept applications through our website. http://hmgsandyjobs.iapplicants.com/ViewJob-30274.html Location: Sandy, UT Compensation: Negotiable - DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Senior GUI Software Engineer 94-96 (Sandy, UT) Sandy, UT Negotiable 2009-05-18 12:07PM
POSITION SUMMARYHere is an awesome opportunity for an innovative, experienced Software Engineer. We are creating a future Center of Excellence for audio and video. We will be developing high end products for Harman. Dont wait! This opportunity will go fast. We are facing critical deadlines for product roll out and delivery. Be part of an innovative, development team. Submit your resume in word format to jackie.riley@harman.com with salary history. This is the highest level engineering position responsible for designing, developing and troubleshooting software programs for computer based systems. The preferred incumbent in this position would have a working knowledge of embedded systems or DSP programming.For more information, or to apply now, you must go to the website below. Please do not email your resume to us as we only accept applications through our website. http://hmgsandyjobs.iapplicants.com/ViewJob-30270.html Location: Sandy, UT Compensation: NegotiablePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Senior Electrical Estimator To $110,000 (Las Vegas) Las Vegas To $110,000 + Benefits 2009-05-18 4:55PM
Etablished & Prominent Electrical Contractor seeking experienced Estimator with Electrical background. Union knowledge a plus. Strong Health & Retirement benefits. Please email resume or Fax to 702-795-3262 for review. Location: Las Vegas Compensation: To $110,000 + BenefitsPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Manufacturing & Production - Engineer in Training 41k 2009-05-18 2:43PM
Engineer in Training - Manufacturing & ProductionInitial training Birmingham, AL (1.5 – 2 years) then must move to one of the following locations: Maine; Tacoma, WA; Warrenton, MO; Grand Rapids, MI; Rockingham, NC; Auburn, AL; and Birmingham, ALBase Salary - $41,000Benefits – FullLess than 1 year of experience !!!!!IF YOU HAVE PAPER EXPERIENCE OR NEED WORK SPONSORSHIP, PLEASE STATE THAT IN YOUR EMAIL WHEN ATTACHING YOUR RESUME….THANKS!A leader in the paper roll packaging industry is searching for an Engineer in Training. This position will work with management on various projects required of a Plant Engineer including preventative maintenance, occupational health and safety, continuous improvement (productivity, efficiency improvement, waste reduction, etc.), and CAPEX (capital expenditures …. expenditures creating future benefits) mechanical projects. Qualifications- Candidate MUST have a bachelors degree in engineering, preferably mechanical, industrial, or electrical. - MUST be willing to move anywhere in the US since following the training period in Birmingham, this position will be used to fill the position of Plant Engineer in one of our mills in specialty product group.- Team Player, Sense of Initiative, Well-Organized, Hands On- Proficient in Microsoft Office ProductsCompany provides an excellent benefits package including: 75% company paid BCBS (Blue Cross / Blue Shield) health and vision, dental insurance, company funded flexible spending account, sports membership, and much more. Compensation: 41kPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Senior Embedded Software Engineer 94-95 (Sandy, UT) Sandy, UT Negotiable - DOE 2009-05-18 1:01PM
Heres an awesome opportunity for an innovative, experienced Software Engineer. We are creating a future Center of Excellence for audio and video. We will be developing high end products for Harman. Dont wait! This opportunity will go fast. We are facing critical deadlines for product roll out and delivery. Be part of an innovative, development team. Submit your resume in word format to jackie.riley@harman.com with salary history. For more information, or to apply now, you must go to the website below. Please do not email your resume to us as we only accept applications through our website. http://hmgsandyjobs.iapplicants.com/ViewJob-30054.html Location: Sandy, UT Compensation: Negotiable - DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Mechanical Engineer (SLC) SLC DOE 2009-05-18 11:23AM
Currently seeking a mechanical engineer to join a growing firm in SLC, in the area of Energy Efficiency and Energy Management.Specific responsibilities will include: performing energy engineering services for clients, reviewing energy efficiency, recommissioning projects, on-site field inspections, installing field monitoring equipment, conducting energy audits, performing comprehensive energy modeling, and performing other related tasks.Experience & EducationBachelors or masters degree in mechanical engineering At least 5 to 7 years building system design experience including HVAC, controls, and piping Professional engineer license strongly preferred (or be on track to obtain a license) Client contact and relationship experience Strong verbal and written communications skills, including report and presentation preparation Excellent interpersonal and analytical skills Experience with Department of Energy modeling tools such as eQuest DOE 2.2 is preferred Familiarity with ASHRAE 90.1 2004 and 2007 and IECC 2006 Location: SLC Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Estimating Supervisor 2009-01-18 9:16AM
Estimating Supervisor Job Description: Estimating Supervisor will be responsible for supervising estimating procedures to ensure accurate and timely estimates for the purpose of providing total installed cost estimates for clients for pre-feasibility, feasibility, and final proposals for mining, hydrocarbon, gas compression, and power generation projects. Considering candidates requiring relocation. Job Duties: Manage estimating department personnel while ensuring they have proper tools and training to perform job requirements. Prepare the most complex cost estimates on material, equipment, and labor using drawings, specifications, and other data provided by engineering as a basis for quantity take-offs. Price estimates using current quotations, historical information, and/or factors. Review estimates prepared by staff members and discuss with the engineering disciplines and product groups to ensure that scope/specifications estimates are compatible and complete. Analyze accuracy of estimates, compare estimates against actual costs, and report to management. Establish and implement procedure improvements to reduce costs and bid preparation time. Job Requirements: BS degree plus 5+ years of estimating experience in a heavy industrial setting.Mining, oil/gas, (preferred industrial background). Accurate math and analytical skills with extensive knowledge of standard estimating techniques. Must have computer experience using company standard software and be proficient in use of spreadsheets (Excel). Ability to read and interpret drawings and specifications. PREFERRED: Four-year TECHNICAL degree, with 10+ years experience in cost estimating or similar field. Experience with Timberline estimating software.Pay will be commiserate with experience.Benefits: Full Benefits Package Assignment Type: Direct Hire Location Salt Lake City, UT 84119 Salt Lake County.Please contact me:Email: sandersc@sostechnical.com Phone: 801-261-5252 Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.PostingID: 997562166 No contact info? if the poster didnt include a phone number, email, or other contact info, craigslist can notify them via email.
Sales Representative (Salt Lake City, UT) Salt Lake City, UT $90-$150K 2009-01-17 8:49AM
Sales Representative needed in Salt Lake City for a Colorado based distributor of engineered products including heat exchangers, pumps, valves, steam traps, strainers, instrumentation and controls.Minimum requirements include B.S. engineering degree from accredited university or equivalent on the job training. A minimum 5 years working in outside sales in an industrial or engineering environment is required with a good working knowledge of valves, steam systems and heat transfer equipment. Prior sales experience selling process equipment is required and only those candidates with this experience will be considered.This is a hands-on position that is involved in all aspects of sales and service. Overnight travel is required. Good mechanical, electrical, computer and communications skills are required.This is a base + commission position with a target compensation of $90,000 - $150,000 per year. Benefits include travel allowance, medical insurance, 401K with company match and supplemental Aflac insurance.Only candidates currently living in or near SLC will be considered.Mountain States Engineering & Controls is a 30 year old company with a reputation for quality products and outstanding service. The company is embarking on a strategic growth initiative that includes increasing staff and making business infrastructure investments.jobs@mnteng.comwww.mnteng.comNo phone calls please. Location: Salt Lake City, UT Compensation: $90-$150KPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 996383451
Proffesional Engineer with Entrepeneur mind (SLC) SLC 1 2009-01-16 12:09PM
If you have an E100 license or can get one within a year we need to talk we currently have 3 partners that are interested in starting or buying a business in the Highway construction industry and would like to get the ball rolling to potentially become one of the best in the industry. Please email me your resume if you are interested. We want to start or buy no later than August of this year. The company will be local and will expand after a few years nationally. Location: SLC Compensation: 1Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 995391130
HVAC Mechanical Engineer with PE (Salt Lake City/ Ogden) Salt Lake City/ Ogden Up to $95,000 DOE 2009-01-16 3:57PM
Mechanical Engineer Required: 4 years bachelorsGood work ethicGood people skills Ability to assume PM responsibilitiesLicensed PE4 years minium experienceDesired:Ability to designReasonable computer skillsConsistently punctualAbility to meet deadlines4 years experience with HVAC and plumbing Day to Day:Design documents are given to the Cad Staff.Specifications booklets are given to clerical staff.Meet with vendorsLayout and direction of draftingReview completed drawingsCalculationsResolve design IssuesSpecify what equipment is needed for the job98% of their work is industrial Location: Salt Lake City/ Ogden Compensation: Up to $95,000 DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 995739930
Mechanical Engineer (Salt Lake City, Utah) Salt Lake City, Utah $60,000 - 80,000 2009-01-16 3:17PM
Basic Function:The Mechanical Engineer will be responsible for identifying, prioritizing, and executing corrections to mechanical issues to support the needs of the industrial facility.This position will report to the Project and Discipline Manager.Major Activities:•Responsible for providing mechanical support for all plant mechanical issues.•Analyze operating procedures and specifications such as finite element and thermal analysis, piping system analysis, equipment specifications, etc. and make sure they are properly adhered to. •Coordinate with operations in order to meet quality assurance and quality control standards.•Review and transmit clear, concise, and accurate information to Project Manager and Discipline Manager. Requirements:•Must have BS or MS Degree in mechanical engineering with at least 5-7+ years experience in heavy industrial.•Must have knowledge of piping, pipe flow, crushers, conveyers, fluid material handling, screening, flow of materials, and industrial engineering principals applicable to heavy industries such as mining, petrochemical and manufacturing. •Must have good communication, human relations, organizational skills, and strong business acumen. •Strong ability to understand the practicality of ideas and suggestions and be able to identify, analyze, and solve problems with minimal supervision. Our client is a full service consulting engineering company, offering professional engineering services in the disciplines of civil, structural, mechanical, electrical, and controls engineering. They are dedicated to assisting customers in achieving their economic goals through the development of trusting, long term relationships providing cost- effective, state-of-the-art engineering and design. This company provides a working environment that fosters pride, loyalty, self-esteem, learning advancement and synergy through interdependence for all employees. They are committed to a high performance culture and provide an environment that challenges their employees to be remarkable and obtain their full potential. They are offering a competitive compensation package. Salary will be in line with experience, employer-funded health insurance, and 401(k) plan. Location: Salt Lake City, Utah Compensation: $60,000 - 80,000Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 995685905
Electrical Engineer (Salt Lake City, Utah) Salt Lake City, Utah $70,000 - 90,000 2009-01-16 3:15PM
Electrical EngineerBasic Function:The Electrical Engineer will be responsible for identifying, prioritizing, and executing corrections to any and all electrical issues to support the production needs of the industrial facility. This person will assist the Project Manager.Major Activities:•Provide electrical technical support for any and all electrical improvements and optimization.•Review and transmit clear, concise, and accurate information to Project Manager and Discipline Manager. Requirements:•Must have BS or MS Degree in electrical engineering with at least 8-10 years experience in the heavy industrial.•Must have knowledge of power distribution and instrumentation. High voltage, controls, load studies, short circuit analysis, low flow studies, specifications, one-line diagrams, transmission line sag and tension calculation, HAZOP analysis, relay circuit breaker and fuse coordination studies, large motor starting analysis, field checkout and start-up, and motor sizing calculations. •Must have a solid understanding of industrial engineering principals applicable to heavy industries such as mining, petrochemical and manufacturing. •Must have strong business acumen, good communication, human relations, and organizational skills. Business Degree in addition to an Electrical Engineering degree is preferred. •Strong ability to understand the practicality of ideas and suggestions and be able to identify, analyze, and solve problems with minimal supervision. Our client is a full service consulting engineering company, offering professional engineering services in the disciplines of civil, structural, mechanical, electrical, and controls engineering. They are dedicated to assisting customers in achieving their economic goals through the development of trusting, long term relationships providing cost- effective, state-of-the-art engineering and design. This company provides a working environment that fosters pride, loyalty, self-esteem, learning advancement and synergy through interdependence for all employees. They are committed to a high performance culture and provide an environment that challenges their employees to be remarkable and obtain their full potential. They are offering a competitive compensation package. Salary will be in line with experience, employer-funded health insurance, and 401(k) plan. Location: Salt Lake City, Utah Compensation: $70,000 - 90,000Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 995682539
Electrical Design Engineer (Salt Lake City, Utah) Salt Lake City, Utah $62,000 - 83,000 2009-01-16 3:12PM
Electrical Design EngineerBasic Function:The Electrical Design Engineer will be responsible for the technical design of projects in a variety of different industrial sectors. Provide detail design calculations, specifications, and produce detail design drawings.This position will report to the Project and Discipline Manager.Major Activities:•Provide detail design calculations, specifications, and produce detail design drawings.•Review and transmit clear, concise, and accurate information to Project and Discipline Manager. Requirements:•Must have BS or MS Degree in Electrical Design engineering with 10-20 years experience in the heavy industrial and commercial industries.•Must have knowledge of Auto Cad, schematic wiring diagrams, I/O drawings, physical plant drawings, conduit, bus duct, cable and wire way layout drawings, equipment schematic wiring diagrams, construction drawings, substation design, power supply design, as-built drawings applicable to heavy industries such as mining, petrochemical and manufacturing. •Must have strong business acumen, good communication, human relations, and organizational skills.•Strong ability to understand the practicality of ideas and suggestions and be able to identify, analyze, and solve problems with minimal supervision. Our client is a full service consulting engineering company, offering professional engineering services in the disciplines of civil, structural, mechanical, electrical, and controls engineering. They are dedicated to assisting customers in achieving their economic goals through the development of trusting, long term relationships providing cost- effective, state-of-the-art engineering and design. This company provides a working environment that fosters pride, loyalty, self-esteem, learning advancement and synergy through interdependence for all employees. They are committed to a high performance culture and provide an environment that challenges their employees to be remarkable and obtain their full potential. They are offering a competitive compensation package. Salary will be in line with experience, employer-funded health insurance, and 401(k) plan. Location: Salt Lake City, Utah Compensation: $62,000 - 83,000Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 995678545
ELECTRICAL ENGINEER - RENEWABLE ENERGY (CENTRAL OREGON) CENTRAL OREGON DOE 2009-01-16 3:03PM
FANTASTIC OPPORTUNITY FOR AN ESTABLISHED, SUCCESSFUL, AND GROWING COMPANY IN BEND, OREGONOverview: Performs Electrical Design & Manufacturing / Testing support for Power Systems. Under minimal supervision the ideal candidate will coordinate with project leaders and colleagues to determine the need for and design / implement electrical components and subsystems systems that satisfy the industry’s safety and performance standards. In addition to design this position includes significant hands on support and trouble shooting of wiring systems and sensors. Prototyping /Breadboarding skills with discrete components and microprocessors are considered a plus. This position will involve working with high energy electrical devices such as batteries or utility connections.Responsibilities:• Prepare prototypes and component assemblies and systems that meet establishedspecifications• Design and build component test fixtures and test plans• Conduct and report on experiments and tests• Provide first line of engineering support for manufacturing assembly and field service• Troubleshoot and repair circuit boards to the component level• Support and interface with agency testing• Design and layout simple PCBA’s• Research component technologies and trade offsRequired Qualifications: • BS Degree in Electrical Engineering. Associates Degree considered with significantand relevant experience• 6+ years experience in product development or manufacturing• Ability to trouble-shoot analog and digital electronics• Experience with light programming in C or assembly• Knowledge of proper electrical manufacturing techniques (soldering, wire layout,terminations, etc)• Knowledge of Capture and Layout packages• High Level of Competence in working with PC’s in an Engineering Environment• Knowledge of Electrical Instrumentation (O-scopes, meters, etc)Desired Qualifications:• Experience with EMC concepts and measurement techniques• Power Supply Design• ESD Handling Methods• New Product Introduction Location: CENTRAL OREGON Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 995665608
***Architect/Engineer Firm Owners/Operators Wanted*** (SLC area) SLC area see ad 2009-01-16 11:03AM
It is the beginning of the year 2009, how is your business performing in an economy such as todays? How does your 1st Quarter look for profitability?I am looking for sharp, high performance Business Owners/Entrepreneurs.My company has found a way to generate $10-20,000 per month in todays economy through real estate and real estate education.This industry has been primed for serious business owners to take advantage of possibility given by the economy.Please feel free to contact me when you feel like you could use this information and I will be glad to share it with you.801-712-3606 or respond by email Location: SLC area Compensation: see adPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.PostingID: 995292266

next 100 Listings >