motor is no good..the body is good if you need it Location: chattanoogaits NOT ok to contact this poster with services or other commercial interests

ROBINAIR A/C UNIT - $2500 -------------------------------------------------------------------------------- Reply to: sale-jbzre-1230464460@craigslist.org [Errors when replying to ads?] Date: 2009-06-19, 10:49PM EDT FOR SELL IS A 2007 ROBINAIR REFRIGERANT RECOVERY RECYCLING RECHARGING STATION. IT WAS NOT USED IN 2008 BUT 2 MONTHS AND I CLOSED MY BUSINESS. IT IS LIKE NEW I WELL TAKE $2500.OBO I GAVE $3999.00 FOR IT. THANKS Location: RINGGOLD its NOT ok to contact this poster with services or other commercial interests Location: RINGGOLDits NOT ok to contact this poster with services or other commercial interests

craftsman band saw its NOT ok to contact this poster with services or other commercial interests

dewalt battery kit $250 or best offer its bag, grinder , flahlight,saws all, right angle drill, skill saw, and drill ,, the drill is a 14volt the rest are 18v no batterys and no chargerits NOT ok to contact this poster with services or other commercial interests

pair great shape! ...423-899-3820 Location: Chattanoogaits NOT ok to contact this poster with services or other commercial interests

WELDER FOR SALE: Miller Bob Cat 225 welder150 foot NEW leads$2,000.00Call: 423-421-0885 Location: Ringgold, GAits NOT ok to contact this poster with services or other commercial interests

10,264 hrs. New in March of 05. 200 gallon tank with filter pot and valves(pictured). Air dryer (pictured) Location: Soddy Daisyits NOT ok to contact this poster with services or other commercial interests

MODEL 775. Serial # 2000F01031800027. 4 CYL engine turbo diesel 105 HP, 4 speed transmission, power shift. Tires 15.5x25. Loader bucket 96\" Wide-2yd. Backhoe bucket 24\" wide. 4 wheel steer, 4 wheel drive, extend a hoe reaches 24, joystick controls,1,827 hours, heated/ac cab, perfect glass, lights, dig depth 176\", weight 21,000 LBS. More pictures/details available upon request. Location: Chattanoogaits NOT ok to contact this poster with services or other commercial interests

1. 2004 Atlas Copco GA37 VSD ff Air Compressor with 32,923 running hours, 240 gallon vertical tank, Oil Water separator, Atlas Copco OSC355 ($8,000) 2. 1998 Atlas Copco GA30 Air Compressor with 45,000 running hours, 200 gallon vertical tank and Hankinson HPRP150-115 Air Dryer. ($3,000) 3. Ingersoll Rand air compressor 5 hp, 80 gallon, 175 psi, 17 cfm Model 2475N5 ($1,000) 4. Kohler power system, 20kw generator, John Deere diesel engine, only 59 hours. with switch box $(5,000) 5. Sliding Part Racks for sale, 3 different sizes a. 110\" x 63\" 8 foot tall 300.00 each, we have 2 of them b. 62\" x 63\" 8 foot tall 200.00 each, we have 3 of them c. 50\" x 51\" 8 foot tall 100.00 each, we have 2 of them6. Toilet Tissue, Acclaim 13728 Jumbo Rolls, 8 rolls per case (We paid $32.83 Per Case, selling for $20.00 per Case) 7. Roll Towell, Ecosoft 46100, 12 rolls per case ( We paid $57.79 per case, selling for $30.00 per case) 8. Hand soap, Supreme 5665, pinl lotion skin cleaner (We paid $42.92 per case, selling for $20.00 Per Case)9. Hand soap, super scrub, kutol 4528 (We paid 110.62 per case, selling for $50.00 per case)10. We will aso have 3 trucks for sale: a. 2009 International 8600, Day Cab, Single axle, hydraulic 5th wheel, less than 10k miles. (We are buying out of lease for around 80,000. Will sacrafice for 50,000 OBO) b. 2005 Ottawa YT3U Yard truck, 39,536 miles. ($35,000 OBO) c. 1996 Chevy Box van, 1 ton, 83,372 miles ($3,500)We are at:Autrans Corporation611 Enon Springs Road EastSmyrna, Tn 37167(615)-945-2003 Mike Location: Nashvilleits NOT ok to contact this poster with services or other commercial interests

SNAP ON BOTTOM & HANGING SIDE BOX PLUS CORNWELL TOP BOX TOTAL 33 DRAWERS ALL IN GOOD WORKING ORDER & HAVE KEYS TO ALL $2,800.00 TOTAL IM HAVING TO SALE DUE TO HEALTH REASONS. CALL BARRY 423-316-1754 ROSSVILLE GA 30741 VISIT ME ON EBAY: TOOLS COLLECTIBLES AND MORE (SELLER ID: BTOOLSNMORE3161754) EMAIL: btoolsnmore@comcast.net Location: Rossvilleits NOT ok to contact this poster with services or other commercial interests

Delta Boss Bench Oscillatting Sander $200.00 Location: Ider,Alits NOT ok to contact this poster with services or other commercial interests

Rockwell Model 10 Radial Arm Saw 2hp $200.00 Location: Ider,Alits NOT ok to contact this poster with services or other commercial interests

10in. table saw has all attachments $50 call (423)886-3949 Location: signal mtn.its NOT ok to contact this poster with services or other commercial interests

I have a devilbiss paint gun. Comes with whats in the picture. You can call for more information and are welcome to come look at it. 931 247 1754 Location: chattanoogaits NOT ok to contact this poster with services or other commercial interests

14 Poulan Woodshark Chainsaw Perfect for light cutting and most jobs around the yard 14 guide bar Gear-driven automatic oiler Primer bulb for easy starting Vertical cylinder design Fully assembledPurchased a couple months back, used for literally about 15 mins and decided to hire someone to do the job... Easy to use, light weight, easy to start...So new I would have returned had it been less then 30 days....Great Deal...Firm on price.... Location: EAST RIDGEits NOT ok to contact this poster with services or other commercial interests

By Central Machinery. Like New. Instruction Book included. $425.00 706-866-6310 Location: Rossvilleits NOT ok to contact this poster with services or other commercial interests

This is in great shape, i just dont need it....423-322-0990 Location: Ringgoldits NOT ok to contact this poster with services or other commercial interests

Mider box, heavy duty, older style with large saw. 50.00 423-892-4261 Location: E.Brainerdits NOT ok to contact this poster with services or other commercial interests

9-amp reciprocating saw with variable speeds and 1-/18-inch-long stroke Blade and shoe changes are quick and painless with tool-less adjustment feature Ball and needle bearings extend tool life; externally accessible brushes allow easy maintenance Includes plastic case for convenient storage Measures 17-3/4-inches long NEW, NEVER USED $80 CALL BARRY 423-316-1754 2525 CLOUDSPRINGS RD (END OF MAC SMITH RD, MAKE A LEFT ON CLOUDSPRINGS, 4TH BUILDING ON LEFT) VISIT US ON EBAY: TOOLS AND MORE ( SELLER ID: BTOOLSNMORE3161754) Location: ROSSVILLEits NOT ok to contact this poster with services or other commercial interests

10 Amp 0-2800 SPM Variable Speed Trigger 3/4\" stroke For plumbing & electrical etc Trigger speed control 11 amp Milwaukee built motor Quik-LokTM blade clamp for fast, easy blade changes Double bearing wobble plate mechanism for less vibration Center pivot adjustable shoe Rubber boot for superior gripping Heavy duty S jacket 8 ft. two wire rubber cord Double insulated Uses standard 1/2 in. shank Sawzall® Blades - blades may be clamped upside down for special cutting needs THIS SAWZALL HAS BEEN USED, BUT VERY LITTLE $80 CALL BARRY 423-316-1754 OR STOP BY 2525 CLOUDSPRINGS RD IM ON EBAY: TOOLS AND MORE (SELLER ID: BTOOLSNMORE3161754) Location: ROSSVILLEits NOT ok to contact this poster with services or other commercial interests

Milwaukee 3107-6 7.0 Amp 1/2-Inch Right Angle Drill with D-Handle Used extensively for drilling between joist and studs, in tight corners, or in close quarters, this 7 amp heavy-duty drill has all ball and roller bearings for durability and long-term use. The head and handle swivel 360 degrees and can be locked tight in any position for difficult drilling angles. This variable-speed drill can handle up to 4-5/8-inch selfeed bits, and delivers 0 to 355 rpm on low, 0 to 750 rpm on high, and 0 to 500 rpm with the right angle driver removed. Your kit includes tool with Quik-Lok cord, RAD drive, 9/16-inch open-end wrench, socket wrench, chuck remover bar, side handle, and impact-resistant plastic carrying case. THIS DRILL HAS BEEN USED $175 CALL BARRY 423-316-1754 OR STOP BY 2525 CLOUDSPRINGS RD CHECK OUT MY EBAY STORE: TOOLS AND MORE (SELLER: BTOOLSNMORE3161754) Location: ROSSVILLEits NOT ok to contact this poster with services or other commercial interests

ARMSTRONG 32-636 1-1/8\" AND 32-640 1-1/4\" SPUD WRENCHES PROTO C908 1-1/4\" SPUD WRENCH $35/EACH CALL BARRY 423-316-1754 OR STOP BY 2525 CLOUDSPRINGS RD I HAVE AN EBAY STORE: TOOLS AND MORE (SELLER: BTOOLSNMORE3161754) CHECK OUT MY SELECTION OF KLEIN, PROTO, S-K, CRAFTSMAN, AND SNAP-ON TOOLS Location: ROSSVILLEits NOT ok to contact this poster with services or other commercial interests

4 STRUCTURAL/ ERECTION/ SPUD WRENCHES AVAILABLE FROM DIFFERENT MANUFACTURERS OPENING SIZES: 1-1/16, 1-5/8, 1-1/4, 1-3/8\" $35/ EACH OR ALL FOR $120 CALL BARRY 423-316-1754 OR STOP BY 2525 CLOUDSPRINGS RD I HAVE AN EBAY STORE: TOOLS AND MORE (SELLER: BTOOLSNMORE3161754) CHECK OUT MY SELECTION OF KLEIN, PROTO, S-K, CRAFTSMAN, AND SNAP-ON TOOLS Location: ROSSVILLEits NOT ok to contact this poster with services or other commercial interests

ASSORTED STYLES/WEIGHTS/ LENGTHS FRAMING/ FINISHING/ CEMENT/ BRICK HAMMERS REASONABLE PRICES ~$20/HAMMER CALL BARRY 423-316-1754 2525 CLOUDSPRINGS RD ROSSVILLE GA 30741 EBAY STORE: TOOLS COLLECTIBLES AND MORE; SELLER: BTOOLSNMORE3161754 Location: ROSSVILLEits NOT ok to contact this poster with services or other commercial interests

MATCO TOOLS GMPS620 COMPLETE SET $100 CALL BARRY 423-316-1754 EMAIL btoolsnmore@comcast.net come check it out at 2525 cloudsprings rd i have an ebay store \"tools collectibles and more\" seller id: btoolsnmore3161754 Location: ROSSVILLEits NOT ok to contact this poster with services or other commercial interests

I HAVE A VERY LARGE SELECTION OF ALL SORTS OF TOOLS INCLUDING BUT NOT LIMITED TO SOCKETS, PLIERS, WRENCHES, HAMMERS, TOOL BELTS, DRILL BITS, AND SAW BLADES. IF YOU HAVE ANYTHING YOU ARE LOOKING FOR, DO NOT HESITATE TO CALL OR STOP BY MY STORE OR VISIT ME ON EBAY. CALL BARRY 423-316-1754 OR STOP BY 2525 CLOUDSPRINGS RD EBAY STORE: TOOLS AND MORE (SELLER: BTOOLSNMORE3161754) CHECK OUT MY SELECTION OF KLEIN, PROTO, S-K, CRAFTSMAN, AND SNAP-ON TOOLS Location: ROSSVILLEits NOT ok to contact this poster with services or other commercial interests

No motor or wheels, not used in a long time, good to fair condition, a little rust but could be sanded. $85 or make offer. Location: Ooltewahits NOT ok to contact this poster with services or other commercial interests

119 pc. Craftsman Mechanics Tool Set with several pieces missing. See PicturesGreat deal! Location: Red Bankits NOT ok to contact this poster with services or other commercial interests

DREMEL AND DREMEL KIT FOR SALEINCLUDES THE DREMEL AND THE KIT WITH BITS AND EXTRA SANDING ROUNDS, COMPLETE WITH ALL THE BITS, NOTHING IS MISSING BUT A FEW SANDING ROUNDS ASKING $40 CALL ERICK AT 423 718 9685, OR REPLY AND EMAIL MY SISTER...=-) THANKS AND HAVE A NICE DAY. Location: TRENTON, SAND MOUNTAINits NOT ok to contact this poster with services or other commercial interests

This weedeater is in good condition i started it up this morning and it runs fine there are no problems what so ever.I am asking 50 dollars for it but if you call im sure we can work out a deal or something you can reach me at 423-535-0505 or email at egbunch@hotmail.com feel free to call if you have any questions. my name is Ethanit is easier to contact me by phone anytime of the dayThank You Location: chatt areaits NOT ok to contact this poster with services or other commercial interests

Craftsman 12\" electronic band saw on stand. Digital readouts for miter degrees, tension,etc...Also comes with a platform base on casters for easy moving. Others small tools available. Location: Red Bankits NOT ok to contact this poster with services or other commercial interests

We bought a Craftsman Keyless Entry Model 139.53754 Security + It doesnt work w/ our garage door opener It has been opened but never used. Location: Soddy Daisy its NOT ok to contact this poster with services or other commercial interests

Stop digging when Replacing water, sewer or gas lines. Stop destroying lawns, gardens, drivways etc by digging when replacing lines or pipes. Our machinery at work on a job : http://www.youtube.com/watch?v=oExYonAwWrU Contact us for more information 1-877-411-PIPE 7473 its NOT ok to contact this poster with services or other commercial interests

Shut down my shop shop some time ago, (Im 51) but I held ontoa couple of tool and cutter grinders and going to sell one now. Its a Browne & Sharpe model 10N - 3 phase 220/440 No extra tooling goes with it except 1 wheel hub.Make me an offer, its gotta go....and Id rather toss it up here first than give ebay a cut....but I plan on listing it tomorrow.Thanks for looking.its NOT ok to contact this poster with services or other commercial interests

I have a nice Bridgeport m head milling machine for sale, Excelent condition, New collet set, kurt style 6\" vise, power feed, Table Size: 9\" x 32\" Travel Y-Axis: 9\" Travel X-Axis: 14\" Knee Travel: 16\" Vertical Ram Travel: 9\" w/ 360 Deg. Rotation Spindle Taper: Morse #2 Spindle Speeds: 275 to 4250 RPM Number Of Spindle Speeds: 6 Main Motor: 208/220/440V-3PH-60Hz.Curriently under power so buyer can try it out. I can load on your trailer. Call 423-506-3137 for more information. Location: Athensits NOT ok to contact this poster with services or other commercial interests

i have a 80 gal lay down type air compressor for shop use. runs great just want to sell dont know what size but motor is good and has very large electric motor on it. it is 220 volt.single stage. it is for sale for 500.00 firm might take trade on nice gas welder or plasma cutter.email me at jeepin90@yahoo.com Location: alabamaits NOT ok to contact this poster with services or other commercial interests

We have a wacker j-tamp for sale. It has less than 50 hours of work and is in excellent condition. We were asking $850, but reduced it to $800 because we need the money worse than we need the tamp. Even at $800, its a REAL STEAL!! This item lists on sites like amazon.com, and contractorsdirect.com for almost $3000. Please email, or call 423-658-8224. Thanks Location: Whitwellits NOT ok to contact this poster with services or other commercial interests

This is a Sawsmith radial arm/miter/table saw. Model no. 700000. serial no. 702174. Last built in 1963. has the unit, base, table board, and metal frame for the dust catcher (the plastic long since disintegrated-easy to replace). Also comes with scroll saw. They made lots of attachments for it, but I dont have any of those. You will need to buy 4 small bolts and nuts to attach the unit to the base. Its a little dusty but otherwise in very good shape. Works very well. Also comes with some blades, cant guarantee their sharpness, but I think there may be 1 new one. Unit is very heavy. Price is 200.00 OBO or may trade for a 60-68 Chevy pickup body. Please call Mike in Cleveland at 423-693-8262.

i need to sell my do some trades just let me know what you have and send picsemail me at blacknova78@yahoo.com the only thing not show in th pic is a hand sander and an impack wrench and i have two drills

working good the battery does not keep charge for muchalso if you have a battery you do not need i may be getting it and keep this one for me

Old Mowing Sickle call 423-421-9620

got compresion but cant start itgot a blade and a chain with it not sure it is from this unit

I am asking $35.00 on my small delta saw, $45.00 on my larger firestorm compund miter saw and $175.00 on my square D 200 amp breaker box w/ panel and main breaker included. If interested, Please contact: 423-544-8755 AND make me an offer. No reasonable offer will be refused. It is best to call me if you want these items. These items are located at a business. I am willing to split whichever item you want into two payments. I will work w/ you if you want these items. Have a great day.

Has R-22 and R-12 on the Gauges. Nice set

12ft Ladder Fiberglass 300lb rating, Not cracked warped or bent. Just has a little paint on it. Theyre $300 new so heres a bargain Chris 706-638-1026

The picture says it all. Been used but not abused. Stands in great shape and works well. Chris 706-638-1026

5 Ton Budgit Hand Chain Hoist - USA SeriesHas atleast 20 ft lift. Hoist is new, Never been used. Sells for 2500.00 for a new one, Come get it at a bargain. 2 Ton hoist shown in one of the pics but I do have the 5 Ton SeriesBase Price: $1,994.95Customized Price: $2,490.50- Kit Details -Chris 706-638-1026

New Titan 14\" Cut-Off Professional SawNew In the Box Never OpenedSpecificagions:110Volt/60Hx2000 WattNo Load Speed: 3600RPMMax Cut Capacity: 4\"x7 3/4\"Features: Quick Release Vise for High EfficiencyAdjustable Depth Stop for Precise,Repeatable Cutting depth.Guide Plate Adjust 45 Degrees Right & LeftSpark Diversion Guard for Operators SafetyCuts Angle Iron Conduit, Drywall Track, and All kinds of pipe and so much more.I bought this Saw Brand New and never took it out of the Box. Im moving so someone can get a STEAL of a Deal for only $400.00. Call 834-4930 or egray05@bellsouth.net

NEW Heavy Duty Commercial Trash PumpHorse Power 5.5HP Gas Pull StartFuel 2.3 GallonDimensions L-36\" W-211/2\" H-25\"Net Weight 84LbsGallons per Hour 15840.Comes with both intake and out take hoses 3\" I bought this Heavy Duty Trash Pump Brand New but never used it. The Cost New was $1700.00. Im moving so someone can get a Steal of a Deal for only $600.00. Call 834-4930 or egray05@bellsouth.net

NEW Titan Industrial Heavy Duty Air Compressor Model TAC=2T5.5 Horse Power- Gas - Pull StartFuel Capacity 2.3 GallonDimensions L-44\" W-191/2\" H-25\"New Weight 160Lbs8 Gallon Air TanksCFM 12@100 Psi. I Bought this Air compressor Brand New and never used it. The Cost new Was $1350.00. Im moving so now someone can get a Steal of a Deal for only $700.00 Call 834-4930 or egray05@bellsouth.net

UP FOR SALE IS A JACOBS #4 BALL BEARING SUPER CHUCK IN GOOD CONDITION. IT HAS A NUBER 4 TAPER SHAFT AND COMES WITH THE SHAFT ADPTORFOR ANY QESTIONS OR TO SEE THIS ITEM CALL JEFF AT 423-284-6147 THANKS FOR LOOKING.

Camper eletric start gen, needs carb repair, has few hours running, call 423-779-4420.

I have listed a good used portable welder/generatorthat can be setup for mig,tig or stick. This machine has 120 and 220 volt outlets and features an Onan 20 hp gas engine. This unit only has 2333 hours serice time and works very well, This unit comes mounted on wheels but can be mounted directly on to a service truck. will take a partial trade. please phone jonathan at 423-255-8676

This is a 50 piece set of paintless dent repair tools for automobiles.They are name brand PDQ. They have only been used about 10 times, also it comes with bag,roll cart, and stand up light.Everything you need to startdoing dent work tomorrow.Paid over $2000 just for the tools.Will sell all for $1000.00 If interested call (706)506-9143 Kelvin

New. 18V Cordless drill with variable speed, forward/reverse, 6 torque settings and keyless chuck. This set includes: 6 pc Drill Bit Set 6 pc Screwdriver Bit Set 1 Magnetic Extension Bit Rechargeable Battery Rechargeable Base AC Power Adapter Custom Storage Case.

FOR SALE: Craftsman 16-in. Scroll Saw Model # 21616Craftsman 16 in. Scroll Saw, Bench Top 21616. This saw has never been taken out of its original packaging. It is a bench top tool and great for those wood cutting hobbies and projects.SPECS: Single-speed 1.0 amp motor delivers 1,725 strokes per minute. 3/4 in. blade stroke provides an aggressive cutting action. 10-1/4 x 17-1/8 in. cast-iron table tilts up to 45 deg left. Cutting capacity up to 1 in. deep at 45 deg, 2 in. deep at 90 deg. Heavy-duty, cast-iron base dampens vibration and increases stability. Adjustable clear plastic guard/hold-down. Includes 4 blades. Uses pin type blades only.Contact: 706-858-9248

For boosting cars, Has a cig. Lighter on side, And flash light built in. Worked good when put in building, But lost charging cord. $20 takes it.

Check out these heavy duty fold out storage containers!The photos show the actual size. 4 bins per rack, entire rack is 24 inches in length. Clear fold out bins are easily removed for ease in loading.I will ship these to lower 48 for actual shipping in original boxes.I have four of these total.Email me here jeeps4dan@aol.com

I have a Thermal Dynamics Plasma Cutter that is in excellent condition. The plasma cutter was only used 5 or 6 times and has always been stored indoors and looks very nice. It hasnt been abused, works really well, and cuts up to 1 1/4\" or, severance cut to 1 1/2\". I have 2 boxes of tips and different accessories that goes with it as well as the owners and instruction manuals. This is a nice machine bought in 2004. I would be willing to consider a trade for a nice car trailer with a solid metal floor. I also like to trade on other items so if you have a trade, email me a picture for consideration. If your really interested in the cutter and want to see it, Call Chris at 706-638-1026

This is for the serious buyer only. this is a Master tool set for the professional or the one who wants to look like one. Too many tools and drawers to mention . must see SERIOUS INQUIRIES ONLY PLEASE! MATCO AND SNAP ON THE BEST TOOLS MONEY CAN BUY!!! 40K WORTH OF TOOLS!!!!!!!CALL KIRK AT 423-488-3386 - Agent for seller.

I have 2 brand new Duo-Fast Staplers Model 3118. Both shoot a 3/8 crown with a 3/16 to 9/16 leg staple. I will take $100 for one or $150 for both.

Wagner Paintcrew Airless Paint Sprayerwith GunCall for info9am to 6pm423-760-4370Check out my other items for sale here:http://s372.photobucket.com/albums/oo169/NorthGATradingPost/?start=all

STIHL BlowerGET THEM LEAVES GONE!!Call for info9am to 6pm423-760-4370Check out my other items for sale here:http://s372.photobucket.com/albums/oo169/NorthGATradingPost/?start=all

Skill SawsPlenty to choose from$25eachCall for info9am to 6pm423-760-4370Check out my other items for sale here:http://s372.photobucket.com/albums/oo169/NorthGATradingPost/?start=all