Caftsman 14.4 V Cordless circular saw/drill set (in carrying case) saw has never been used and drill was used a few times $150 OBO Location: Woonsocket, RIits NOT ok to contact this poster with services or other commercial interests

Miter saw works,needs new blade,come and get it,e-mail me and ill get right back to you with my number,thanks. Location: woonsocket,riits NOT ok to contact this poster with services or other commercial interests

Hello i have a tool belt thats brand new,i used it 1 time,it cost me $75,come and get it,just e-mail me and ill get right back to you with my number.thanks. Location: woonsocket,riits NOT ok to contact this poster with services or other commercial interests

Jet JWCS-10 10\" cabinet saw with 52\" Xacta Fence II system. Comes with manual, zero clearance insert, etc.Delta model 37-195 6\" professional jointer$500 for each item. Reply via email or (401) 766-2810 Location: woonsocketits NOT ok to contact this poster with services or other commercial interests

Barely used craftsman tool set116 pieces Location: Woonsocketits NOT ok to contact this poster with services or other commercial interests

Looking to sell a jointer been gararged since owned still in new condition asking $225.00 OBO. Location: woonsocketits NOT ok to contact this poster with services or other commercial interests

TPI “K” & \"J\" Type Differential Temperature Thermocouple Thermometer c/wProtective Rubber Boot w/ Tilt StandCarry PouchInstructionsUse the thermometer with any “K” or \"J\" type probe with a sub mini connector (none supplied) to accurately measure various temperatures within the ranges specified below. Connect probes to both inputs and view not only each temperature but the differential between the two. Temperature Ranges of:~\"K\" Type Mode = -200 to 1350 Deg C (-328 to 2462 Deg F)\"J\" Type Mode = -200 to 1000 Deg C (-328 to 1832 Deg F)Resolution of 0.1 Deg C up to 1000 Deg C then 1 Deg C thereafterRuggedizedMin/Max RecordAutomatically selects the best resolutionDeg C & F selectable\"K\" or \"J\" type probe selectableHold FunctionDual InputsWater ResistantLow Battery IndicatorAuto Power OffGeneralDimensions ~ 41 x 152 x 77 mm Weight ~ 278g Power needed ~ 9 V battery (supplied)Temperature Range ~ -200 to 1350 Deg C (-328 to 2462 Deg F)Resolution ~ 0.1 Deg C up to 1000 Deg C then 1 Deg C thereafterAccuracy ~ +/- 3% of reading or 1 Deg C whichever is greater $40 firm Location: woonsocketits NOT ok to contact this poster with services or other commercial interests

Yellow Jacket Test and Charging Manifold R-12, R-22, R-502 Model # 2248272One of the knobs is missing on the set on right and one of the spindles is broken on the set on the left, easy fix.$40 firm Location: woonsocketits NOT ok to contact this poster with services or other commercial interests

Picture attached. Powerful light weight hand punching tool for punching holes in all types of metals. Comes with 7 punches and Dies in lightweight case with instructions and Die Key Location: woonsocketits NOT ok to contact this poster with services or other commercial interests

$50 firmemail if interested Location: woonsocketits NOT ok to contact this poster with services or other commercial interests

1 CRN38K Cordless roofing nailer 20.4 Volts system comes with gun, coil clip feeder, case and 2 batteries . This is a $500.00 gun and was only used for one summer, so it is in great condition. 50%off original price for a basically new gun. $225.00 or best offerCall 401 762-9967 Location: Woonsocketits NOT ok to contact this poster with services or other commercial interests

hi i have for sale a big big vise about 100 lbs in good shape i am asking $75 for it. e-mail me if you have any ? Location: woonsocketits NOT ok to contact this poster with services or other commercial interests

i have a brand new never used crain for the back of a pick up bed it is a 500 lbs crain. i am asking $75.00 for it .Comes with all stainless hardware also. i also have a used 2000 lb one that is bigger for $85.00 please email me if you have any ? Location: woonsocketits NOT ok to contact this poster with services or other commercial interests

1 CRN38K Cordless roofing nailer 20.4 Volts system comes with gun, coil clip feeder, case and 2 batteries . This is a $500.00 gun and was only used for one summer, so it is in great condition. 50%off original price for a basically new gun. $225.00 Call 401 762-9967 Location: Woonsocketits NOT ok to contact this poster with services or other commercial interests

Noma 2 cycle snowblower (made in Canada for tough winters): manual or electric start (comes with electric cord). 4.5 HP with adjustable shoot (left/right; higher/lower). Have owners manual with instructions/maintenance. Location: Woonsocket, RIits NOT ok to contact this poster with services or other commercial interests

Small used table saw, old but in good condition. Some surface rust that can be easily cleaned. Seems to run good. Delivery negotiable. $25.00 OBO. Call Doug 401-692-6414. Location: Woonsocketits NOT ok to contact this poster with services or other commercial interests

IN EXCELLENT WORKING CONDITION AND IS IN GREAT SHAPE...BEST OFFER TAKES IT... Location: WOONSOCKETits NOT ok to contact this poster with services or other commercial interests

SAW FOR SALE, OUT OF BOX BUT NEVER USED. PURCHASED NEW 2008. 10 INCH TABLE SAW. LITTLE DUSTY FROM BEING IN THE BASEMENT. REASONABLE OFFERS CONSIDERED. CASH ONLY. THANK YOU!Heavy-Duty 10\" Job Site Table Saw - DW744X FEATURES Exclusive, telescoping fence delivers 24-1/2\" rip capacity without sacrificing portability Rack and Pinion fence rails make fence adjustments fast, smooth and accurate Telescoping rails retract within the saw top for easy portability Features a 15.0 Amp high-torque motor with the power to cut pressure-treated lumber and hardwoods Electronic feedback maintains blade speed during difficult applications Soft start allows blade to smoothly come up to speed Features a heavy-duty internal motor mechanism which stabilizes the arbor, keeping vibration to a minimum 2\" Dust Collection Port easily connects to a vacuum for efficient dust extraction 3-1/8\" depth of cut at 90° and 2-1/4\" at 45° 26-1/2\" X 19-1/4\" table surface provides superior material support SPECIFICATIONSAmps 15 AmpsNo Load Speed 3,650 rpmBlade Diameter 10 \"Arbor Size 5/8 \"Dust Port Diameter 2-1/4 \"Depth Of Cut At 90° 3-1/8 \"Depth Of Cut At 45° 2-1/4 \"Max Rip To Right Of Blade 24-1/2 \"Max Rip To Left Of Blade 15-1/2 \"Max Width Of Dado 13/16 \"Tool Weight 57 lbsShipping Weight 98 lbs Location: WOONSOCKET RIits NOT ok to contact this poster with services or other commercial interests

husky tool chest/roll-away.paid over $900.00 in1996.in excellant condition.like new.$650.00obo.contact Brian401-765-5095.3:00pm-10:00pm Location: woonsocket,r.i.its NOT ok to contact this poster with services or other commercial interests

heavy duty extension ladder.working type with flats on the rungs.two to three times as heavy as what you can get anywhere for 1/3 the price.$150.00 obo.call Brian @401-765-5095 BETWEEN 3:00pm-10:00pm. Location: woonsocket,r.i.its NOT ok to contact this poster with services or other commercial interests

here is a new 18v dewalt combo set with 2 saws 6.50 circular saw and sawzall has 1carger and 1 battery all items are xrp this is a great price for all these items Location: woonsocket RIits NOT ok to contact this poster with services or other commercial interests

Weather Guard by Knaack mfg co. 3 pvc tubes lockable covers . strong, safe, secure. perfect condition 3-tubes 6\" in diam. = 1-8 , 1- 9 , 1- 4 . just mount to your roof rack. Call 7am - 9pm 774-291-6465 from a non-private # (no private/blocked calls). - keywords pipe carrier tube tubing ladder rack plastic pvc copper galvanized steel electric wiring conduit plumbing construction contractor Location: Woonsocketits NOT ok to contact this poster with services or other commercial interests

here is a used cement and mortar mixer that iam done with . this mixer runs and looks great it has a new 6.50 hp motor and new paint and well taken car of it is a 6 cubic ft mixer . the only thing i did not do is put new tires . thread is still good but the side walls are weather cracked . this mixer is a tag along as you can see. Location: woonsocket RIits NOT ok to contact this poster with services or other commercial interests

Commercial size paint sprayer bought from Home Depot 10 years ago, has just been sitting, dont need it anymore. It is the wagner Pro Gold pro series .44 GPM 3/4 hp Model # 844ex17 This was a $500 dollar unit when first purchased, I am asking $100 Call 401 762-9967 Location: Woonsocketits NOT ok to contact this poster with services or other commercial interests

1 CRN38K Cordless roofing nailer 20.4 Volts system comes with gun, coil clip feeder, case and 2 batteries . This is a $500.00 gun and was only used for one summer, so it is in great condition. $190.00 Call 401 762-9967 Location: Woonsocketits NOT ok to contact this poster with services or other commercial interests

Small used table saw, old but in good condition. Some surface rust that can be easily cleaned. Seems to run good. Delivery negotiable. $25.00 OBO. Call Doug 401-692-6414. Location: Woonsocketits NOT ok to contact this poster with services or other commercial interests

Selling a Like NEW Homelite Gas Hedge Trimmer as pictured. Homelite model UT40502, GAS 26 CC, 20\" Cut. Looking to get $85. Its NEW, only used once!! Nothing wrong with it, just moved and no more shrubs to cut. You know it goes for much more!! Over $125 new. $10 for me to deliver. Feel free to email with any Qs or for info on picking this item up. Location: woonsocket, RIits NOT ok to contact this poster with services or other commercial interests

1 CRN38K Cordless roofing nailer 20.4 Volts system comes with gun, coil clip feeder, case and 2 batteries . This is a $500.00 gun and was only used for one summer, so it is in great condition. $200.00 Call 401 762-9967 Location: Woonsocketits NOT ok to contact this poster with services or other commercial interests

Dewalt \"NEW IN BOX \" dw4kit-2 set NEVER USED!!!! MINTSet comes with XRP 2 batteries but Im throwing in 2 more XRP batteries never used (see photo)Price is Firm401-769-2951 Location: WOONSOCKETits NOT ok to contact this poster with services or other commercial interests