Make: New HollandFuel:  DieselModel: TC 33DEngine Cylinders:  3Model Year: 1999Engine HP:  33Hours: 890Transmission Type: HydrostaticDrive: 4WDCondition: UsedSerial Number: YL3071551999 New Holland TC33D 33 H.P., 4WD, Compact Tractor w/ Super Steer & 3 spd. Hydrostatic transmission. NH 7308 Front End Loader w/ tooth bar & 2 year old Woods RD7200 72? Rear discharge finish mower w/ chain guard. Options include R4 industrial tires, 2 sets remote hydraulic valves, folding ROPS w/ white sun shade, arm rests, rear work light, asst. step, engine block heater, suitcase weights on the front and rear wheel weights, all manuals, only 890 hrs., excellent condition. Used almost exclusively to mow grass. Stored in a garage.South Edmonton Common is a commercial area approximately one block wide between Calgary Trail and Gateway Boulevard The industrial parks are on the far or east side of South Edmonton CommonThomas was buried the following day (5 June 1939) with his wife in the Nundah Cemetery Their original headstone has not survived but today there is a modern plaque placed on their grave sayingVertical search Articles needing additional references from October 2007 Domain specific search engines Internet search Fact Algorithm Business marketing Collaborative search engine Cost Per Click Cost per thousand Desktop search / Location: Rhode Islandits NOT ok to contact this poster with services or other commercial interests

Brand New Out of the Box, NEVER BEEN USED!!! 5.5 Horse Power 24 4- Cycle 3 Speed Craftsman Snow Thrower with a 4-Cycle Tecumseh Snow King Engine. Owners manual included. A MUST SEE!! $700, OBO Contact us at sjnirenberg@yahoo.com for additional information. Location: BARRINGTON, RIits NOT ok to contact this poster with services or other commercial interests

McCULLOCH MAC M1000 3 horsepower excellent condition (used once) 1000 PSI$35 Location: Providenceits NOT ok to contact this poster with services or other commercial interests

Caftsman 14.4 V Cordless circular saw/drill set (in carrying case) saw has never been used and drill was used a few times $150 OBO Location: Woonsocket, RIits NOT ok to contact this poster with services or other commercial interests

This drill is BRAND NEW but has no battery or charger. It is BRAND NEW, never even screwed 1 screw in. You can get a charger and battery at Home Depot. 10.8V Compact Lithium-Ion Cordless 2-Speed Driver-Drill Features : 2-speed Driver-Drill delivers 200 in.lbs of torque in an ultra compact size Makita-built motor delivers 200 in.lbs of torque in an ultra compact size 2-Speed design (0-350 / 0-1,300 RPM) covers a wide range of drilling and driving applications Ultra compact design at only 6-3/16? long and weighs only 1.9 lbs for reduced operator fatigue Built-in L.E.D. light illuminates the work area Ergonomic shape fits like a glove with even pressure and easy control Soft grip handle provides increased comfort on the job. If interested write to myabradabracadabra@yahoo.com Location: Providenceits NOT ok to contact this poster with services or other commercial interests

Wagner Paint Crew Paint Sprayer. Sprayer works great, will demonstrate, has paint on it, but its complete and ready to go to work. If you are interested you can write me at myabradabracadabra@yahoo.com I will reply to all and will remove this ad when its gone. Thanks for looking. Location: Providenceits NOT ok to contact this poster with services or other commercial interests

One lot of asssorted trowls and punches. Price is for the whole lot. No seperating. Call 401-228-5385.its NOT ok to contact this poster with services or other commercial interests

Ramset Corbra ToolSemi-Automatic low velocity piston type fastening toolUsed one projectPlease Call Before 7:00PM1-401-595-7308Jeff Location: Lincoln, RIits NOT ok to contact this poster with services or other commercial interests

This is a model A2000 9160 made in italy it has very little use it was bought new for body shop. It is in excellent shape ready for use. Call me at (401) 374-6871. Thank You. Location: cranstonits NOT ok to contact this poster with services or other commercial interests

HARDLY USED CRAFTSMAN TOOL CHEST WITH 5 DRAWERS AND POWER HOOK UP. CHEST IS PORTABLE AND IS ON WHEELS FOR EASY MOVING. COME GET IT TODAY! Location: EASTSIDE PROVIDENCEits NOT ok to contact this poster with services or other commercial interests

50 Kilowatt Kohler Generator This is a Kohler fifty kilowatt generator powered by a Hercules in-line 6 cylinder gasoline engine pushing out 133 horsepower. This unit was used as a back-up generator for a large building and has very little hours on it. Currently am waiting for the carburetor kit, then it will be in perfect running condition. Always starts right up, runs very smooth and surprisingly quiet. Has control unit with plug ins and also a very long power chord. It is on dual axle trailer, tires have 100% tread. The Hercules engine is fitted with a water heater as it is an Army engine.GeneratorModel: 55R82Serial Number: 250448Spec. Number: 7930AKilowatt: 50KWAmperage: 173Phase: 3Volts: 120/208RPM: 1800Hercules EngineModel: G3400Serial Number: DL 3309134Spec. Number: G3400X20</table Compressor tool truck dump wood fire drill wrench chain winch saw trailer ford chevy Toyota gmc dodge scion international tractor farmall spring engine low miles leather heat rims Chevrolet mustang corvette providence dozer back hoe 4X4 construction frame iron aluminum stainless steel galvanized metal jack hammer equiptment junk excavator skid steer hydraulic clutch powerful fast strong off road trail building electric dc ac extension chord smoke diesel Cummins sale giant awd evo wrx company great buy here pay here cheap long lasting Yamaha Suzuki guitar drum ski doo bombardier atv scooter smart car convertible concrete copper tires doors light coil hardwood floor carpet household commercial stone sheet rock cement Location: Northern Rhode Islandits NOT ok to contact this poster with services or other commercial interests

Rigid Kollmann Drum Drain Cleaner with Transport Cart. Solid core cable 1/2\" x 75. Some drain tips included.Call: 401-617-3794 or email: fpernini@yahoo.com Location: Cumberlandits NOT ok to contact this poster with services or other commercial interests

6 ton heavyduty jackstands 400.00 obo takes them Location: anywhereits NOT ok to contact this poster with services or other commercial interests

Computer Tire Balancer works good 220 volt has all the cones Location: Attleboro,Maits NOT ok to contact this poster with services or other commercial interests

Tire machine works good but leaks air out of beed breaker Location: Attleboro,MAits NOT ok to contact this poster with services or other commercial interests

Craftsman 12\" Wood-Turning Lathe, Model 113.288160, is a 1/2 hp. wood turning lathe with 4 spindle speeds. It is in MINT condition, with no rusted, broken, or worn-out parts. The 1/2 hp. motor runs on 120 volt AC current; it is reversible with capacitor start and runs very smoothly and quietly. The headstock has a spur center with #1 Morse taper, and the tailstock has a cup center with #1 Morse taper. The lathe has a 12\" turning capacity over the lathe bed, and a maximum distance of 37\" between centers. An owners manual, assembly instructions, parts diagram and list, as well as a description of basic lathe operation, is included. Selling price is $200. Call (401)295-8229 or e-mail mvaidala@cox.net. Location: exeter, Rhode Island 02822its NOT ok to contact this poster with services or other commercial interests

Delta shopmaster dust collector in nice condition $150 Location: Scituateits NOT ok to contact this poster with services or other commercial interests

Like new BlackMax Generator powered by 13hp Honda engine runs exellent...$750.00 Location: Scituateits NOT ok to contact this poster with services or other commercial interests

GREAT DEAL ON LADDERS LOIUSVILLE 6FT. LADDER $50WERNER 6FT LADDER $50HUSKY 6FT LADDER $55IF INTRESTED CONTACT 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests

nice doall 3 in belt sander 110 volts 401-569-923 Location: riits NOT ok to contact this poster with services or other commercial interests

Black and Decker electric trimmer for sale. Only $10. Call Jeff for details at 641-3042 of 946-3477 Location: Johnstonits NOT ok to contact this poster with services or other commercial interests

SCREW PRESS #4 $1300 IF INTRESTED CONTACT 401-569-9823 THANK YOU OTHERS TO CHOSE FROM Location: RIits NOT ok to contact this poster with services or other commercial interests

BUCK MFG. TAPPING HEAD 0-1/4 IN $50 IF INTRESTED CONTACT 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests

BLACK & DECKER 3/4 HP ROUTER 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests

PARTS FINISHING TUMBLER 110 VOLTS BARREL MEASRURES 19 IN DIAMETER AND 10 IN DEEP IF INTRESTED CONTACT 401-569-9823 $175 Location: riits NOT ok to contact this poster with services or other commercial interests

DEWALT DRYWALL TOOLS CUT OUT TOOLS SCREW GUNS ECT. $45-55 40569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests

CLARK 2000 LB FORK LIFT TANK NOT INCLUDED WILL LOAD IF INTRESTED 401-569-9823 Location: riits NOT ok to contact this poster with services or other commercial interests

miller stick willder,255amp,singlephasewith100of leads,400 Location: tivertonits NOT ok to contact this poster with services or other commercial interests

Used in Good Condition. Has Optional Casters. Retails over $1,000.00Dimensions: H:23\" W: 24\" L: 72\" Weight (lbs.): 216 Cubic feet: 24.5 Closed Height 28 1/8 Open Height 49 1/4 Additional reinforcement between the lock and the side housing Stronger protection against pry-ins - bigger, better hingesCall Steve 737-0907 Location: Pawtucketits NOT ok to contact this poster with services or other commercial interests

I have two glass blowing pipes for sale one is approximately 55 1/4 inches tall with 1/2 inch opening. That one is $80.00 Originally over $100.00The other pipe is approximately 54 1/2 inches tall and is 1/4 inch opening. This one is 100.00 and went for close to $150.00.They are used but are both in great condition. Take a look at the pictures.Please send me an email if interested in one or both. Location: Barringtonits NOT ok to contact this poster with services or other commercial interests

DRILL PRESS VERY DEPENDABLE THIS IS A FLOR MODEL 401-569-9823 Location: RI/MAits NOT ok to contact this poster with services or other commercial interests

i have a new dewalt driver impact cordless drill. i am asking a firm 200 for this drill. i have to pay my home depot card off with it. lost job selling tools. including the cardless dewalt wrench drill that sells for 300 im asking 200 for that as well, but does not come with carrying case on that drill. the impact is a complete set though.. if you want to buy this as a package deal ill let both items go for 375. email me or call me at 774-526-0008.. and i will deliver or meet half way Location: ill deliverits NOT ok to contact this poster with services or other commercial interests

B & S 1\" MICROMETER $25 COMES WITH CASE WELL KEPT AOTHER TO CHOOSE FROM AS WELL 401-569-9823 THANK YOU Location: RIits NOT ok to contact this poster with services or other commercial interests

CRAFTSMAN 16 IN SCROLL SAW 2 IN SAW HIGHT IT IS VERIABLE SPEED WITH STAND $125 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests

Like new -- only used twice with additional blades and owners manual. Also has foot pedal adaptor to turn on and off. Location: North Providenceits NOT ok to contact this poster with services or other commercial interests

CRAFTSMAN TABLE TOP SHAPER REVERSABLE SHAPER 1 HP 1800 RPMS GOOD CUTTING HEAD 401-569-9823its NOT ok to contact this poster with services or other commercial interests

I have a miter saw and table saw for sale. They are both makitas with 10 inch blades. The miter is the light weight. Still in nice condition. the table saw is the old style green that still works nice.I would like to sell them together for 150.00. email me with any questions. Thanks Location: RIits NOT ok to contact this poster with services or other commercial interests

Tired of posting your ad everyday? Post a photo ad for 30 days for only $3.00! http://everybodysin.com/marketplace Location: New Englandits NOT ok to contact this poster with services or other commercial interests

PRICE IS TODAY ONLY (TUES 6/30)!! End of the month sale.JLG 60’ Boom Lift DSL 4W (#12172)Year: 19983865 hours$10900You will not find another lift this size at this price. And it was recenlty painted.60 day parts and labor warrantyScott401-434-5530Today onlyYou must have a billable address in RI or South Eastern MA Location: East Providenceits NOT ok to contact this poster with services or other commercial interests

This warehouse or garage loft lift works perfectly. These sell new for over $1000.00 Platform raises to five foot. For more info and to take a look, call me, Dennis, at 401-741-2478 Location: South Kingstown R.I.its NOT ok to contact this poster with services or other commercial interests

JOHNSERED TOOLS/OBRIEN TREE SERVICE AUTHORIZED JOHNSERED DEALEROBrien Tree and Landscape is your Authorized Johnsered Dealer. Johnsered products incude: CHAINSAWS, BRUSHCUTTERS,TRIMMERS,HEDGE TRIMMERS, BLOWERS AND TOOLS. Why Stay Ordinary! For Johnsered, efficiency,ergonomics and function goes without saying. They believe in small things that make a big difference. If you are in search of a Johnsered Dealer, look no more. Come visit us at 1675 South County Trail East Greenwich, Rhode Island 02818 Contact Owner Bill OBrien at (401) 785-1425 or (401) 885-7455 its NOT ok to contact this poster with services or other commercial interests

Sears Craftsman Cast Iron 10\" Table Saw with stand. Some rust on table surface, motor runs well. Includes miter, heavy duty fence, and brand new Craftsman Taper Jig. Model Number 11329992 Location: Warwick/EGits NOT ok to contact this poster with services or other commercial interests

In like new condition may have never been used I got it in a clean out 3750mrpms either 5 or 6 inch IM NOT SURE RUNS GREAT . iT IS A HEAVY INDRUSTIAL GRINDER YOU SEE LISTED FOR $350 to $500 new Ill take $50 Location: narragansettits NOT ok to contact this poster with services or other commercial interests

Lesco Back pack sprayer in exellent condition Location: 10 cherry lane barrington RIits NOT ok to contact this poster with services or other commercial interests

www.lotsoflifts.comfor more listingsSkyjack 20’ Electric Scissor Lift (#SKP20569)Year: 1999404 hours$2550I will discount $500 if you purchase before July 1st.Scott401-434-5530 Location: East Providenceits NOT ok to contact this poster with services or other commercial interests

Here I have a Porter-Cable pancake jetstream compressor, model #CF2600 which inlcudes hose, Porter Cable nail gun and instructions, 2 HP, 6 gallons. If you just want the compressor without the nail gun it will be $130.00. PLEASE CALL, THIS EMAIL IS RARELY CHECKED. Call between 8 a.m.- 7 p.m. at 508- 883-7971 or cell 1-774-292-1598. Location: BLACKSTONE, MA. 01504its NOT ok to contact this poster with services or other commercial interests

For sale a Sears letter router jig and an overhead router fixture the router on the fixture is not for sale but to show how the fixture is used see pics Location: Scituateits NOT ok to contact this poster with services or other commercial interests

BENCH VISES FROM .........................................................$25-75R8 TOOL HOLDER FOR MILLING MACHINE...............$10-$30 EA END MILL ...........................$0.50-$1.00INSPECTION TOOLS DPETH GAGES, MICROMETERS, DIAL INDICATORS WITH BASE ECT....................... $20-85 SOUTH BEND 14 1/2 LATHE WITH TAPER ATACHMENT FULL TOOLED UP INCLUDES TOOL POST CXOLLECTS DRAW BAR DRILL CHUCK ECT 3 HP MOTOR 220 VOLTS .......................$2000 CALL 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests

VINTAGE DELTA VERABLE SPEED FLOOR MODEL DRILL PRESS 1/2 HP 110 VOLTS 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests

I m selling a rockwell ban saw in great shape for $175call me Tony @ 401-692-1061 Thanks Location: RIits NOT ok to contact this poster with services or other commercial interests

For sale is a Lazy Lifter Pro drywall and panel hoist. Used once, this lifter features 150 pound lifting capabilities, tilting 11 foot hoist, extending arms for bigger or smaller pieces, and independent casters for increased maneuverability. The unit also breaks down and folds up for easier storage, and comes with the original manual. Location: Smithfieldits NOT ok to contact this poster with services or other commercial interests

I BOUGHT THIS NEW A WHILE AGO AND MAYBE USED IT THREE TIMES THOUGHT ID GET MORE USE OUT OF IT BUT I PAID 750 BRAND NEW MAKE ME A REASONABLE OFFER AND ILL TAKE IT Location: FALL RIVERits NOT ok to contact this poster with services or other commercial interests

Miter saw works,needs new blade,come and get it,e-mail me and ill get right back to you with my number,thanks. Location: woonsocket,riits NOT ok to contact this poster with services or other commercial interests

Hello i have a tool belt thats brand new,i used it 1 time,it cost me $75,come and get it,just e-mail me and ill get right back to you with my number.thanks. Location: woonsocket,riits NOT ok to contact this poster with services or other commercial interests

160 Amp Welder. This is a welder inverter and will tig most all metals, alluminum, stainless steel, copper, alloy and carbon steel. It has a 40 Amp Plasma Cutter that will cut 1/2 inch steel. It is a 160 Amp. Tig Welder and 160 Amp Stick. The welder is like new and works fine. The picture is that of a 200 Amp Machine I replaced it with. I wil have pics of the 160 soon.The 160 looks the same with a few less dials. If interested, give me a call at: 401-480-1617........Tom Location: Cumberlandits NOT ok to contact this poster with services or other commercial interests

Gang box I used in the back of my F150. Inside dimensions approx 24x24x48. Stands 27 1/2 high with feet. Could use a paint job to match your truck! \"*Junk inside not\" included. Call 401-725-9664. Location: ((Lincoln, RI))its NOT ok to contact this poster with services or other commercial interests

Here I have three Craftsman items a double insulated router model #315.14780, grinder model #27, double insulated and a 1 1/2\" max wheel, Sander 315.11680 dual motion double insulated. All three run great. If interested please call AS THIS EMAIL IS RARELY CHECKED. BETWEEN 8 A.M- 7 P.M. AT 508-883-7971 OR CELL 1-774-292-1598. Location: BLACKSTONE MA. 01504its NOT ok to contact this poster with services or other commercial interests

Craftsman two piston portable air compressor w/20 gal tank, regulator. Wired with an Extra Service 220V 20AMP motor. This has a full crankcase,two pistons, holds oil and will supply enough air to run a handymans workshop Has adjustable limit switch with two air hook ups; one direct and one adjustable. Super for a small work shop or aux compressor and will run air tools, impact guns, spray equip, etc. It is ready to run and does not come with any accessories. Email any questions. I have the owners manual \"somewhere\" but cant locate it (CRS) so I do not know the CFM output, sorry. Location: Smithfieldits NOT ok to contact this poster with services or other commercial interests

PACKARD 14\" BAND SAW 110 VOLTS 3/4 HP 1720 RPM....................$400 LIKE NEW VERY LITTLE USE 401-569-9823its NOT ok to contact this poster with services or other commercial interests

Craftsman table saw comes with extended table, fence and outfeed table. Runs great and is in very good condition!Please call Dave @ 401-383-4266drl14@hotmail.com Location: Cranstonits NOT ok to contact this poster with services or other commercial interests

chain fallmonarch$50.001-508-883-1670 Location: bellingham maits NOT ok to contact this poster with services or other commercial interests

There are 7 wood planes, 1-21”, 3-16”, 1-15” 1-8 ¾” and 1-8”. Included are 2-12” wooden levels and a small wood clap asking $90.00 for everything Location: Warwickits NOT ok to contact this poster with services or other commercial interests

AIRCO CUTTING TORCH, full size, A1 condition, rebuilt in 2006, $35, 401-821-1353 or Jo85@webtv.net Location: west warwickits NOT ok to contact this poster with services or other commercial interests

5\" heavy duty bench vise, new condition, never used.call Paul at 401-596-9140 Location: Westerlyits NOT ok to contact this poster with services or other commercial interests

Black and Decker new out of the box -- never used -- paid $158.36 -- if interested call Steven at 401-658-6767 Location: Cranstonits NOT ok to contact this poster with services or other commercial interests

Dremel for sale. 2 years old and was used once.Details:Two Speed15,000 & 35,000 RPMComes with case and attachments.$50 OBO Location: Taunton, MAits NOT ok to contact this poster with services or other commercial interests

Assortment of landscaping tools. All electric powered. Leaf blower, 1 trimmer, 3 edgers. Sold as a group or separate. Best offer Location: Warwickits NOT ok to contact this poster with services or other commercial interests

Large assortment of handtools and wetvac. Sold as group or separetly. Best offer Location: Warwickits NOT ok to contact this poster with services or other commercial interests

Very large assortment of all kinds of hand tool. Too many to list. Can be sold together or separate. Location: Warwickits NOT ok to contact this poster with services or other commercial interests

Electric Trimmer will accept any reasonable offer Location: Warwickits NOT ok to contact this poster with services or other commercial interests

Adjustable Heavy Duty Pipe Roller Stands, great for pipefitters or ironworkers. Adjusts 30\"-50\" height. $125.00 a pair OBO. Willing to sell one or both together. Call direct @ 401-316-4988 - John Location: Coventryits NOT ok to contact this poster with services or other commercial interests

Star powered nail gun with bullets. 1964 with owners manual Location: Warwickits NOT ok to contact this poster with services or other commercial interests

Ryobi 18 volt cordless 1/2 inch drill, cordless wet/dry vac, & cordless work light, with charger and two batteries Location: North Kingstownits NOT ok to contact this poster with services or other commercial interests

I have two brand new recessed lights and two packs of electrical wire: 12/2 and 14/2. These are not full rolls but there is still a lot of wire in each pack. SOLDSOLDSOLD Location: Westerlyits NOT ok to contact this poster with services or other commercial interests

Power Back 5250 Watt Generator with Tecumseh 10HP motor. I bought this brand new at Home Depot when I moved here a couple years ago from down south, assuming there would be power outages in the North. I am moving back to the south and need to sale it. I paid over $600 for it. $350 obo!!!!!! Location: Westerlyits NOT ok to contact this poster with services or other commercial interests