|
Title
|
Location
|
Compensation
|
Date/Time
|
GRIZZLY G4000 LATHE - $450 |
|
|
2009-06-30 12:06PM |
|
9X19 GRIZZLY G 4000 LATHE 450.00CALL 401-265-2342its NOT ok to contact this poster with services or other commercial interests |
|
CRAFTSMAN TOOLS |
|
|
2009-06-30 12:05PM |
|
10 INCH,2HP, DIRECT DRIVE TABLE SAW 75.00ROUTER TABLE 50.003 INCH,1HP, BELT SANDER 50.006 INCH DISC SANDER 50.006 INCH PRO-TECH BENCH GRINDER 50.00CALL 401-265-2342its NOT ok to contact this poster with services or other commercial interests |
|
New Holland TC-33D Compact tractor, Woods 72 mower - $3700 (Rhode Island) (pic)
|
Rhode Island |
|
2009-06-30 7:56PM |
|
Make: New HollandFuel: DieselModel: TC 33DEngine Cylinders: 3Model Year: 1999Engine HP: 33Hours: 890Transmission Type: HydrostaticDrive: 4WDCondition: UsedSerial Number: YL3071551999 New Holland TC33D 33 H.P., 4WD, Compact Tractor w/ Super Steer & 3 spd. Hydrostatic transmission. NH 7308 Front End Loader w/ tooth bar & 2 year old Woods RD7200 72? Rear discharge finish mower w/ chain guard. Options include R4 industrial tires, 2 sets remote hydraulic valves, folding ROPS w/ white sun shade, arm rests, rear work light, asst. step, engine block heater, suitcase weights on the front and rear wheel weights, all manuals, only 890 hrs., excellent condition. Used almost exclusively to mow grass. Stored in a garage.South Edmonton Common is a commercial area approximately one block wide between Calgary Trail and Gateway Boulevard The industrial parks are on the far or east side of South Edmonton CommonThomas was buried the following day (5 June 1939) with his wife in the Nundah Cemetery Their original headstone has not survived but today there is a modern plaque placed on their grave sayingVertical search Articles needing additional references from October 2007 Domain specific search engines Internet search Fact Algorithm Business marketing Collaborative search engine Cost Per Click Cost per thousand Desktop search / Location: Rhode Islandits NOT ok to contact this poster with services or other commercial interests |
|
chop box w/stand tbl saw and cordless kits all dewalt othetr misc powe (warwick) |
warwick |
|
2009-06-30 7:50PM |
|
need 2 get rid of a bunch of nice tools asap cheap Location: warwickits NOT ok to contact this poster with services or other commercial interests |
|
CRAFTSMAN SNOW THROWER BRAND NEW OUT OF THE BOX - $700 (BARRINGTON, RI) (pic)
|
BARRINGTON, RI |
|
2009-06-30 7:30PM |
|
Brand New Out of the Box, NEVER BEEN USED!!! 5.5 Horse Power 24 4- Cycle 3 Speed Craftsman Snow Thrower with a 4-Cycle Tecumseh Snow King Engine. Owners manual included. A MUST SEE!! $700, OBO Contact us at sjnirenberg@yahoo.com for additional information. Location: BARRINGTON, RIits NOT ok to contact this poster with services or other commercial interests |
|
High Pressure Washer (electric) - $35 (Providence) (pic)
|
Providence |
|
2009-06-30 7:20PM |
|
McCULLOCH MAC M1000 3 horsepower excellent condition (used once) 1000 PSI$35 Location: Providenceits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman 14.4 V Cordless Drill/Circular Saw Combo Kit - $150 (Woonsocket, RI) (pic)
|
Woonsocket, RI |
|
2009-06-30 6:37PM |
|
Caftsman 14.4 V Cordless circular saw/drill set (in carrying case) saw has never been used and drill was used a few times $150 OBO Location: Woonsocket, RIits NOT ok to contact this poster with services or other commercial interests |
|
Makita 10.8V 2-Speed Driver-Drill Compact Lithium-Ion Cordless - $25 (Providence) (pic)
|
Providence |
|
2009-06-30 6:32PM |
|
This drill is BRAND NEW but has no battery or charger. It is BRAND NEW, never even screwed 1 screw in. You can get a charger and battery at Home Depot. 10.8V Compact Lithium-Ion Cordless 2-Speed Driver-Drill Features : 2-speed Driver-Drill delivers 200 in.lbs of torque in an ultra compact size Makita-built motor delivers 200 in.lbs of torque in an ultra compact size 2-Speed design (0-350 / 0-1,300 RPM) covers a wide range of drilling and driving applications Ultra compact design at only 6-3/16? long and weighs only 1.9 lbs for reduced operator fatigue Built-in L.E.D. light illuminates the work area Ergonomic shape fits like a glove with even pressure and easy control Soft grip handle provides increased comfort on the job. If interested write to myabradabracadabra@yahoo.com Location: Providenceits NOT ok to contact this poster with services or other commercial interests |
|
Paint Crew Sprayer By Wagner - $60 (Providence) (pic)
|
Providence |
|
2009-06-30 6:31PM |
|
Wagner Paint Crew Paint Sprayer. Sprayer works great, will demonstrate, has paint on it, but its complete and ready to go to work. If you are interested you can write me at myabradabracadabra@yahoo.com I will reply to all and will remove this ad when its gone. Thanks for looking. Location: Providenceits NOT ok to contact this poster with services or other commercial interests |
|
Hand trowls, punches, etc. - $25 (pic)
|
|
|
2009-06-30 5:51PM |
|
One lot of asssorted trowls and punches. Price is for the whole lot. No seperating. Call 401-228-5385.its NOT ok to contact this poster with services or other commercial interests |
|
Ramset Cobra - $130 (Lincoln, RI) (pic)
|
Lincoln, RI |
|
2009-06-30 5:43PM |
|
Ramset Corbra ToolSemi-Automatic low velocity piston type fastening toolUsed one projectPlease Call Before 7:00PM1-401-595-7308Jeff Location: Lincoln, RIits NOT ok to contact this poster with services or other commercial interests |
|
corghi tire changing machine - $1450 (cranston) (pic)
|
cranston |
|
2009-06-30 5:35PM |
|
This is a model A2000 9160 made in italy it has very little use it was bought new for body shop. It is in excellent shape ready for use. Call me at (401) 374-6871. Thank You. Location: cranstonits NOT ok to contact this poster with services or other commercial interests |
|
CRAFTSMAN 5 DRAWER TOOL CHEST/W POWER - $85 (EASTSIDE PROVIDENCE) (pic)
|
EASTSIDE PROVIDENCE |
|
2009-06-30 4:21PM |
|
HARDLY USED CRAFTSMAN TOOL CHEST WITH 5 DRAWERS AND POWER HOOK UP. CHEST IS PORTABLE AND IS ON WHEELS FOR EASY MOVING. COME GET IT TODAY! Location: EASTSIDE PROVIDENCEits NOT ok to contact this poster with services or other commercial interests |
|
Kohler 50 Kilowatt Generator - $4500 (Northern Rhode Island) (pic)
|
Northern Rhode Island |
|
2009-06-30 4:02PM |
|
50 Kilowatt Kohler Generator This is a Kohler fifty kilowatt generator powered by a Hercules in-line 6 cylinder gasoline engine pushing out 133 horsepower. This unit was used as a back-up generator for a large building and has very little hours on it. Currently am waiting for the carburetor kit, then it will be in perfect running condition. Always starts right up, runs very smooth and surprisingly quiet. Has control unit with plug ins and also a very long power chord. It is on dual axle trailer, tires have 100% tread. The Hercules engine is fitted with a water heater as it is an Army engine.GeneratorModel: 55R82Serial Number: 250448Spec. Number: 7930AKilowatt: 50KWAmperage: 173Phase: 3Volts: 120/208RPM: 1800Hercules EngineModel: G3400Serial Number: DL 3309134Spec. Number: G3400X20</table Compressor tool truck dump wood fire drill wrench chain winch saw trailer ford chevy Toyota gmc dodge scion international tractor farmall spring engine low miles leather heat rims Chevrolet mustang corvette providence dozer back hoe 4X4 construction frame iron aluminum stainless steel galvanized metal jack hammer equiptment junk excavator skid steer hydraulic clutch powerful fast strong off road trail building electric dc ac extension chord smoke diesel Cummins sale giant awd evo wrx company great buy here pay here cheap long lasting Yamaha Suzuki guitar drum ski doo bombardier atv scooter smart car convertible concrete copper tires doors light coil hardwood floor carpet household commercial stone sheet rock cement Location: Northern Rhode Islandits NOT ok to contact this poster with services or other commercial interests |
|
Plumbing: Drain/Snake Cleaner - $325 (Cumberland) (pic)
|
Cumberland |
|
2009-06-30 3:59PM |
|
Rigid Kollmann Drum Drain Cleaner with Transport Cart. Solid core cable 1/2\" x 75. Some drain tips included.Call: 401-617-3794 or email: fpernini@yahoo.com Location: Cumberlandits NOT ok to contact this poster with services or other commercial interests |
|
stihl chainsaw 028wb - $60 (warren) |
warren |
|
2009-06-30 3:51PM |
|
has no chain break but runs well. brand new carb. older model. never used 4 commerical use Location: warrenits NOT ok to contact this poster with services or other commercial interests |
|
6 ton heavyduty jackstands - $40 (anywhere) (pic)
|
anywhere |
|
2009-06-30 3:46PM |
|
6 ton heavyduty jackstands 400.00 obo takes them Location: anywhereits NOT ok to contact this poster with services or other commercial interests |
|
Hofmahn Tire Balancer - $500 (Attleboro,Ma) (pic)
|
Attleboro,Ma |
|
2009-06-30 3:45PM |
|
Computer Tire Balancer works good 220 volt has all the cones Location: Attleboro,Maits NOT ok to contact this poster with services or other commercial interests |
|
Coats Rim Clamp Tire Machine - $300 (Attleboro,MA) (pic)
|
Attleboro,MA |
|
2009-06-30 3:44PM |
|
Tire machine works good but leaks air out of beed breaker Location: Attleboro,MAits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman 12" Wood-Turning Lathe - $200 (exeter, Rhode Island 02822) (pic)
|
exeter, Rhode Island 02822 |
|
2009-06-30 3:41PM |
|
Craftsman 12\" Wood-Turning Lathe, Model 113.288160, is a 1/2 hp. wood turning lathe with 4 spindle speeds. It is in MINT condition, with no rusted, broken, or worn-out parts. The 1/2 hp. motor runs on 120 volt AC current; it is reversible with capacitor start and runs very smoothly and quietly. The headstock has a spur center with #1 Morse taper, and the tailstock has a cup center with #1 Morse taper. The lathe has a 12\" turning capacity over the lathe bed, and a maximum distance of 37\" between centers. An owners manual, assembly instructions, parts diagram and list, as well as a description of basic lathe operation, is included. Selling price is $200. Call (401)295-8229 or e-mail mvaidala@cox.net. Location: exeter, Rhode Island 02822its NOT ok to contact this poster with services or other commercial interests |
|
Husqvarna Apparel For Sale - $50 (Johnston) |
Johnston |
|
2009-06-30 3:31PM |
|
Husqvarna Protective Apparel For Sale, It is brand new in the box-only asking $50. please call Jeff at 401-641-3042 or 401-946-3477 if you are interested or have any questions Location: Johnstonits NOT ok to contact this poster with services or other commercial interests |
|
DeWalt Sander For Sale - $25 (Johnston) |
Johnston |
|
2009-06-30 3:29PM |
|
DeWalt Palm Grip Sander For Sale-It is new in the box and am only asking $25. If you are interested or have any questions please call Jeff at 401-641-3042 or 401-946-3477. Location: Johnstonits NOT ok to contact this poster with services or other commercial interests |
|
Delta Shopmaster AP400 Dust Collector - $150 (Scituate) (pic)
|
Scituate |
|
2009-06-30 3:25PM |
|
Delta shopmaster dust collector in nice condition $150 Location: Scituateits NOT ok to contact this poster with services or other commercial interests |
|
Like New BlackMax 8125 Generator powered by Honda - $750 (Scituate) (pic)
|
Scituate |
|
2009-06-30 3:15PM |
|
Like new BlackMax Generator powered by 13hp Honda engine runs exellent...$750.00 Location: Scituateits NOT ok to contact this poster with services or other commercial interests |
|
GREAT DEAL ON LADDERS HUSKY WERNER ECT - $70 (RI) (pic)
|
RI |
|
2009-06-30 3:02PM |
|
GREAT DEAL ON LADDERS LOIUSVILLE 6FT. LADDER $50WERNER 6FT LADDER $50HUSKY 6FT LADDER $55IF INTRESTED CONTACT 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
doall 3 in industrial belt sander $175 (ri) (pic)
|
ri |
|
2009-06-30 2:32PM |
|
nice doall 3 in belt sander 110 volts 401-569-923 Location: riits NOT ok to contact this poster with services or other commercial interests |
|
Electric Trimmer For Sale - $10 (Johnston) (pic)
|
Johnston |
|
2009-06-30 2:04PM |
|
Black and Decker electric trimmer for sale. Only $10. Call Jeff for details at 641-3042 of 946-3477 Location: Johnstonits NOT ok to contact this poster with services or other commercial interests |
|
Planer Shaper Joiner Blade Price Reduced - $1 (Providence) |
Providence |
|
2009-06-30 2:01PM |
|
Turn your table saw into a money maker!We hate spam as much as you so go here for our phone, email and a picture! http://rnrbusiness.com/auctionsetc.aspx Thanks! Location: Providenceits NOT ok to contact this poster with services or other commercial interests |
|
SCREW PRESS #4 $1300 (RI) (pic)
|
RI |
|
2009-06-30 1:56PM |
|
SCREW PRESS #4 $1300 IF INTRESTED CONTACT 401-569-9823 THANK YOU OTHERS TO CHOSE FROM Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
BUCK MFG. TAPPING HEAD 0-1/4 in (RI) (pic)
|
RI |
|
2009-06-30 1:54PM |
|
BUCK MFG. TAPPING HEAD 0-1/4 IN $50 IF INTRESTED CONTACT 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
BLACK & DECKER 3/4 HP ROUTER - $25 ( RI) (pic)
|
RI |
|
2009-06-30 1:53PM |
|
BLACK & DECKER 3/4 HP ROUTER 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
PARTS FINISHING TUMBLER 110 VOLTS BARREL - $175 (ri) (pic)
|
ri |
|
2009-06-30 1:49PM |
|
PARTS FINISHING TUMBLER 110 VOLTS BARREL MEASRURES 19 IN DIAMETER AND 10 IN DEEP IF INTRESTED CONTACT 401-569-9823 $175 Location: riits NOT ok to contact this poster with services or other commercial interests |
|
DEWALT DRYWALL TOOLS (RI) (pic)
|
RI |
|
2009-06-30 1:46PM |
|
DEWALT DRYWALL TOOLS CUT OUT TOOLS SCREW GUNS ECT. $45-55 40569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
Ridgid Clean Shop System - $50 (Rehoboth MA) |
Rehoboth MA |
|
2009-06-30 1:43PM |
|
Brand new in box....attaches to wet dry vac to control all sawdust from power tools. Location: Rehoboth MAits NOT ok to contact this poster with services or other commercial interests |
|
CLARK 2000 LB FORK LIFT - $1300 (ri) (pic)
|
ri |
|
2009-06-30 1:43PM |
|
CLARK 2000 LB FORK LIFT TANK NOT INCLUDED WILL LOAD IF INTRESTED 401-569-9823 Location: riits NOT ok to contact this poster with services or other commercial interests |
|
Table Saw - $200 (Rehoboth MA) |
Rehoboth MA |
|
2009-06-30 1:42PM |
|
Ryobi 10 in Table Saw.model BT521. used once. Location: Rehoboth MAits NOT ok to contact this poster with services or other commercial interests |
|
DeWalt Miter Saw - $175 (Rehoboth MA) |
Rehoboth MA |
|
2009-06-30 1:40PM |
|
10\" Compound Miter Saw...120 volt.used once.model DW713 Location: Rehoboth MAits NOT ok to contact this poster with services or other commercial interests |
|
Ryobi Router Table - $75 (Rehoboth MA) |
Rehoboth MA |
|
2009-06-30 1:38PM |
|
Model RT 101, used once. Location: Rehoboth MAits NOT ok to contact this poster with services or other commercial interests |
|
Ryobi Router - $65 (Rehoboth MA) |
Rehoboth MA |
|
2009-06-30 1:36PM |
|
Ryobi Router 1.5 peak HP, model R1801.double insulated. Used once. Location: Rehoboth MAits NOT ok to contact this poster with services or other commercial interests |
|
Coleman Generator - $900 (Rehoboth MA) |
Rehoboth MA |
|
2009-06-30 1:33PM |
|
Powermate portable generator...Pro 6750. Running Wattage 6750, maximum wattage 8500. Brand new in box. Paid $1100.00. Must sell...moving. First $900 takes it. Location: Rehoboth MAits NOT ok to contact this poster with services or other commercial interests |
|
miller stick welder - $400 (tiverton) (pic)
|
tiverton |
|
2009-06-30 1:14PM |
|
miller stick willder,255amp,singlephasewith100of leads,400 Location: tivertonits NOT ok to contact this poster with services or other commercial interests |
|
Job Box Tool Knaack Knack - $435 (Pawtucket) (pic)
|
Pawtucket |
|
2009-06-30 1:04PM |
|
Used in Good Condition. Has Optional Casters. Retails over $1,000.00Dimensions: H:23\" W: 24\" L: 72\" Weight (lbs.): 216 Cubic feet: 24.5 Closed Height 28 1/8 Open Height 49 1/4 Additional reinforcement between the lock and the side housing Stronger protection against pry-ins - bigger, better hingesCall Steve 737-0907 Location: Pawtucketits NOT ok to contact this poster with services or other commercial interests |
|
2 GLASS BLOWING PIPES - A great deal for Student or Professional!!! - $80 (Barrington) (pic)
|
Barrington |
|
2009-06-30 12:34AM |
|
I have two glass blowing pipes for sale one is approximately 55 1/4 inches tall with 1/2 inch opening. That one is $80.00 Originally over $100.00The other pipe is approximately 54 1/2 inches tall and is 1/4 inch opening. This one is 100.00 and went for close to $150.00.They are used but are both in great condition. Take a look at the pictures.Please send me an email if interested in one or both. Location: Barringtonits NOT ok to contact this poster with services or other commercial interests |
|
DRILL PRESS VERY DEPENDABLE - $200 (RI/MA) (pic)
|
RI/MA |
|
2009-06-30 11:54AM |
|
DRILL PRESS VERY DEPENDABLE THIS IS A FLOR MODEL 401-569-9823 Location: RI/MAits NOT ok to contact this poster with services or other commercial interests |
|
DEWALT impact drill new in box - $200 (ill deliver) (pic)
|
ill deliver |
|
2009-06-30 11:40AM |
|
i have a new dewalt driver impact cordless drill. i am asking a firm 200 for this drill. i have to pay my home depot card off with it. lost job selling tools. including the cardless dewalt wrench drill that sells for 300 im asking 200 for that as well, but does not come with carrying case on that drill. the impact is a complete set though.. if you want to buy this as a package deal ill let both items go for 375. email me or call me at 774-526-0008.. and i will deliver or meet half way Location: ill deliverits NOT ok to contact this poster with services or other commercial interests |
|
Pittsburgh Aviation Snip Set BRAND NEW - $18 (Lincoln RI ) |
Lincoln RI |
|
2009-06-30 11:36AM |
|
Pittsburgh Aviation Snip SetBrand New still in box limited lifetime warranty Call Henry 401.742.6194 Location: Lincoln RI its NOT ok to contact this poster with services or other commercial interests |
|
B & S 1" MICROMETER $25 (RI) (pic)
|
RI |
|
2009-06-30 11:36AM |
|
B & S 1\" MICROMETER $25 COMES WITH CASE WELL KEPT AOTHER TO CHOOSE FROM AS WELL 401-569-9823 THANK YOU Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
Pair of Saw Horses - $20 (lincoln) |
lincoln |
|
2009-06-30 11:35AM |
|
Saw Horses have removeable wooden legs 2 x 4 great conditionCall Henry 401.742-6194 Location: lincolnits NOT ok to contact this poster with services or other commercial interests |
|
CRAFTSMAN 16 IN SCROLL SAW W/STAND (RI) (pic)
|
RI |
|
2009-06-30 11:26AM |
|
CRAFTSMAN 16 IN SCROLL SAW 2 IN SAW HIGHT IT IS VERIABLE SPEED WITH STAND $125 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
Wooding planers, steel planers, old hand saws,ect, antique stuff (Mansfield) |
Mansfield |
|
2009-06-30 11:26AM |
|
I have a lot of old tools that are old and antique. I dont have pictures yet ,but will post them when i can. I don,t need to sell them, but not looking for someone to give me nothing for them. If serious give me a email. Thanks Location: Mansfieldits NOT ok to contact this poster with services or other commercial interests |
|
16" Delta Scroll Saw - $90 (North Providence) (pic)
|
North Providence |
|
2009-06-30 11:17AM |
|
Like new -- only used twice with additional blades and owners manual. Also has foot pedal adaptor to turn on and off. Location: North Providenceits NOT ok to contact this poster with services or other commercial interests |
|
CRAFTSMAN TABLE TOP SHAPER - $75 (pic)
|
|
|
2009-06-30 11:16AM |
|
CRAFTSMAN TABLE TOP SHAPER REVERSABLE SHAPER 1 HP 1800 RPMS GOOD CUTTING HEAD 401-569-9823its NOT ok to contact this poster with services or other commercial interests |
|
5500 Watt Generac Overhead Values - $499 (Wakefield) |
Wakefield |
|
2009-06-30 11:04AM |
|
Generac 5500 overhead value 11 HP generator. Only used to exercise it every three months. Starts first pull. Car type oil filter. Synthetic Oil.Still have the box for this. Location: Wakefieldits NOT ok to contact this poster with services or other commercial interests |
|
gas trimmers for slaye - $75 (north providence) |
north providence |
|
2009-06-30 10:04AM |
|
I have two almost brand new lawn gas trimmers, one is a ryobi and the other homelite. I am asking $75.00 dollars for the pair. Location: north providenceits NOT ok to contact this poster with services or other commercial interests |
|
miter saw and table saw - $150 (RI) (pic)
|
RI |
|
2009-06-30 9:59AM |
|
I have a miter saw and table saw for sale. They are both makitas with 10 inch blades. The miter is the light weight. Still in nice condition. the table saw is the old style green that still works nice.I would like to sell them together for 150.00. email me with any questions. Thanks Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
Marketplace - $3 (New England) (pic)
|
New England |
|
2009-06-30 9:58AM |
|
Tired of posting your ad everyday? Post a photo ad for 30 days for only $3.00! http://everybodysin.com/marketplace Location: New Englandits NOT ok to contact this poster with services or other commercial interests |
|
JLG 60 Boom Lift DSL 4W TODAY ONLY!! - $10900 (East Providence) (pic)
|
East Providence |
|
2009-06-30 9:41AM |
|
PRICE IS TODAY ONLY (TUES 6/30)!! End of the month sale.JLG 60 Boom Lift DSL 4W (#12172)Year: 19983865 hours$10900You will not find another lift this size at this price. And it was recenlty painted.60 day parts and labor warrantyScott401-434-5530Today onlyYou must have a billable address in RI or South Eastern MA Location: East Providenceits NOT ok to contact this poster with services or other commercial interests |
|
Jack Hyd/Air - $100 (South Kingstown R.I.) |
South Kingstown R.I. |
|
2009-06-30 9:37AM |
|
This is an older air jack. Has air/hyd piston sitting upright. Lifts car in three seconds. Heavy duty. Will send pics to interested people only. For more info call me, Dennis, at 401-741-2478 Location: South Kingstown R.I.its NOT ok to contact this poster with services or other commercial interests |
|
Horizontal Vertical Metal Cutting Bandsaw - $125 (Warwick RI) |
Warwick RI |
|
2009-06-30 9:17AM |
|
Used Horizontal Vertical Metal cutting bandsaw with homemade stand. Works good. Dont use it often enough to keep it. $125 Location: Warwick RIits NOT ok to contact this poster with services or other commercial interests |
|
Coats 30/30 tire machaine - $200 (South Kingstown R.I.) |
South Kingstown R.I. |
|
2009-06-30 9:02AM |
|
This tire changeing machine works great. I have changed many tires on it. Price is firm. This machine can pay for itself in no time. For more info and to take a look, call me, Dennis, at 401-741-2478 Location: South Kingstown R.I.its NOT ok to contact this poster with services or other commercial interests |
|
Presto hydraulic lift - $250 (South Kingstown R.I.) (pic)
|
South Kingstown R.I. |
|
2009-06-30 8:57AM |
|
This warehouse or garage loft lift works perfectly. These sell new for over $1000.00 Platform raises to five foot. For more info and to take a look, call me, Dennis, at 401-741-2478 Location: South Kingstown R.I.its NOT ok to contact this poster with services or other commercial interests |
|
JOHNSERED TOOLS/O'BRIEN TREE SERVICE AUTHORIZED JOHNSERED DEALER (pic)
|
|
|
2009-06-30 8:35AM |
|
JOHNSERED TOOLS/OBRIEN TREE SERVICE AUTHORIZED JOHNSERED DEALEROBrien Tree and Landscape is your Authorized Johnsered Dealer. Johnsered products incude: CHAINSAWS, BRUSHCUTTERS,TRIMMERS,HEDGE TRIMMERS, BLOWERS AND TOOLS. Why Stay Ordinary! For Johnsered, efficiency,ergonomics and function goes without saying. They believe in small things that make a big difference. If you are in search of a Johnsered Dealer, look no more. Come visit us at 1675 South County Trail East Greenwich, Rhode Island 02818 Contact Owner Bill OBrien at (401) 785-1425 or (401) 885-7455 its NOT ok to contact this poster with services or other commercial interests |
|
Sears Craftsman Cast Iron 10" Table Saw - $25 (Warwick/EG) (pic)
|
Warwick/EG |
|
2009-06-30 8:12AM |
|
Sears Craftsman Cast Iron 10\" Table Saw with stand. Some rust on table surface, motor runs well. Includes miter, heavy duty fence, and brand new Craftsman Taper Jig. Model Number 11329992 Location: Warwick/EGits NOT ok to contact this poster with services or other commercial interests |
|
Like new indrustial black and decker 6 in grinder - $50 (narragansett) (pic)
|
narragansett |
|
2009-06-30 7:35AM |
|
In like new condition may have never been used I got it in a clean out 3750mrpms either 5 or 6 inch IM NOT SURE RUNS GREAT . iT IS A HEAVY INDRUSTIAL GRINDER YOU SEE LISTED FOR $350 to $500 new Ill take $50 Location: narragansettits NOT ok to contact this poster with services or other commercial interests |
|
Lesco Bak Pack Sprayer - $55 (10 cherry lane barrington RI) (pic)
|
10 cherry lane barrington RI |
|
2009-06-29 12:38PM |
|
Lesco Back pack sprayer in exellent condition Location: 10 cherry lane barrington RIits NOT ok to contact this poster with services or other commercial interests |
|
Hand Truck - $50 (10 cherry lane barr, ri) |
10 cherry lane barr, ri |
|
2009-06-29 12:38PM |
|
Appliance TruckW/ratchet Belt Tightener & Mold-on Wheels. Bearing type 700 lbs. Good Condition. Location: 10 cherry lane barr, riits NOT ok to contact this poster with services or other commercial interests |
|
Auto Mechanic t |
|
|
2009-06-29 12:27PM |
|
Hey i have a bunch of general service mechanic tools that i no longer need.1. Gearwrench serpentine belt tool set- $502. Foreign oil filter socket set of 3 (used for Toyota, Volkswagen, lexus.- $203. Blue Point inner tie rod tool with 5 attachments- $404. Ingersoll Impact Air gun.- $455. Set of Impact sockets: 10-22,26,27 deep. 10-22,26,27 short. 7/16-1 1/4 deep. 2 flip sockets 19x21 3/4x13/16 - $1006.4 piece sunex 11\" needle nose plier set.- $257. Harbor Freight Caliper tool set- $108. Craftsman 5 Drawer top chest and 2 drawer with storage bottom box- $50Let me know what you want or make me an offer on all.Give me a call. 401-516-7408Thanks for looking its NOT ok to contact this poster with services or other commercial interests |
|
Equipment SUPER Sale: Boom lifts, Forks, Scissors, etc.. - $1900 (East Providence) |
East Providence |
|
2009-06-29 3:37PM |
|
Equipment Sale February June 200915 to 39 Electric Scissor Lifts - Genie, Skyjack, JLG1998 to 2002 - $2,300 - $6,500 26 to 50 RT Scissor Lifts - Genie, Skyjack, JLG1998 to 2002 - $6,000 - $13,000 - Gas/Propane, Diesel, 4wd30to 45 Electric Boom Lifts Genie & JLG1998 to 2002 - $9,500 to $13,00040 to 120 RT Boom Lifts - (Gas, Diesel 4WD)1998 to 2002 $7,500 - $30,000 Reach Forklifts - Lull, Gradall, Terex6K, 8K, 9K 10K 1998 to 2002 - $15,000 to $30,000Industrial Forklifts - Hyster, Daewoo, Yale3K, 5K, 6K (Electric and Propane)1998 to 2002 - $2,500 - $12,000Other Equipment available:GeneratorsLight Towers CompressorsFor more information, call: Scott 401-434-5530For more listings and pictures - www.lotsoflifts.com10% DISCOUNT IF PURCHASED BEFORE JULY 1ST Location: East Providenceits NOT ok to contact this poster with services or other commercial interests |
|
Skyjack 20 Electric Scissor Lift - $2550 (East Providence) (pic)
|
East Providence |
|
2009-06-29 3:36PM |
|
www.lotsoflifts.comfor more listingsSkyjack 20 Electric Scissor Lift (#SKP20569)Year: 1999404 hours$2550I will discount $500 if you purchase before July 1st.Scott401-434-5530 Location: East Providenceits NOT ok to contact this poster with services or other commercial interests |
|
PORTER CABLE PANCAKE COMPRESSOR - $175 (BLACKSTONE, MA. 01504) (pic)
|
BLACKSTONE, MA. 01504 |
|
2009-06-29 2:42PM |
|
Here I have a Porter-Cable pancake jetstream compressor, model #CF2600 which inlcudes hose, Porter Cable nail gun and instructions, 2 HP, 6 gallons. If you just want the compressor without the nail gun it will be $130.00. PLEASE CALL, THIS EMAIL IS RARELY CHECKED. Call between 8 a.m.- 7 p.m. at 508- 883-7971 or cell 1-774-292-1598. Location: BLACKSTONE, MA. 01504its NOT ok to contact this poster with services or other commercial interests |
|
Router Accesories - $35 (Scituate) (pic)
|
Scituate |
|
2009-06-29 1:55PM |
|
For sale a Sears letter router jig and an overhead router fixture the router on the fixture is not for sale but to show how the fixture is used see pics Location: Scituateits NOT ok to contact this poster with services or other commercial interests |
|
TOOLMAKERS TOOLS (RI) (pic)
|
RI |
|
2009-06-29 1:42PM |
|
BENCH VISES FROM .........................................................$25-75R8 TOOL HOLDER FOR MILLING MACHINE...............$10-$30 EA END MILL ...........................$0.50-$1.00INSPECTION TOOLS DPETH GAGES, MICROMETERS, DIAL INDICATORS WITH BASE ECT....................... $20-85 SOUTH BEND 14 1/2 LATHE WITH TAPER ATACHMENT FULL TOOLED UP INCLUDES TOOL POST CXOLLECTS DRAW BAR DRILL CHUCK ECT 3 HP MOTOR 220 VOLTS .......................$2000 CALL 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
VINTAGE DELTA VERABLE SPEED DRILL PRESS - $300 (RI) (pic)
|
RI |
|
2009-06-29 1:34PM |
|
VINTAGE DELTA VERABLE SPEED FLOOR MODEL DRILL PRESS 1/2 HP 110 VOLTS 401-569-9823 Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
Black N Decker - $35 (Providence) |
Providence |
|
2009-06-29 1:17PM |
|
I have a black n decker portable work station with detach and carry along bag. This is a power pack bag so it holds huge amounts of power tool and a power strip on the outside to easily plug in multiple units. But can be used for any type of tool obviously.Pictures are avaliable upon request.Thanks Location: Providenceits NOT ok to contact this poster with services or other commercial interests |
|
BAN SAW - $175 (RI) (pic)
|
RI |
|
2009-06-29 11:52AM |
|
I m selling a rockwell ban saw in great shape for $175call me Tony @ 401-692-1061 Thanks Location: RIits NOT ok to contact this poster with services or other commercial interests |
|
Drywall Hoist - $135 (Smithfield) (pic)
|
Smithfield |
|
2009-06-29 11:10AM |
|
For sale is a Lazy Lifter Pro drywall and panel hoist. Used once, this lifter features 150 pound lifting capabilities, tilting 11 foot hoist, extending arms for bigger or smaller pieces, and independent casters for increased maneuverability. The unit also breaks down and folds up for easier storage, and comes with the original manual. Location: Smithfieldits NOT ok to contact this poster with services or other commercial interests |
|
AC RECOVERY UNIT - $500 (FALL RIVER) (pic)
|
FALL RIVER |
|
2009-06-29 11:08AM |
|
I BOUGHT THIS NEW A WHILE AGO AND MAYBE USED IT THREE TIMES THOUGHT ID GET MORE USE OUT OF IT BUT I PAID 750 BRAND NEW MAKE ME A REASONABLE OFFER AND ILL TAKE IT Location: FALL RIVERits NOT ok to contact this poster with services or other commercial interests |
|
Black and Decker Miter Saw - $25 (woonsocket,ri) (pic)
|
woonsocket,ri |
|
2009-06-29 10:59AM |
|
Miter saw works,needs new blade,come and get it,e-mail me and ill get right back to you with my number,thanks. Location: woonsocket,riits NOT ok to contact this poster with services or other commercial interests |
|
Assorted Socket Sets - $50 (Newport) |
Newport |
|
2009-06-29 10:50AM |
|
-Cornwell, 13 piece, 1/4\" drive, deep, 6 point, metric socket set. The sockets range from 4mm to 15mm. The original holder is still with them and so is the price, they were $172.43 brand new.-Matco, 12 piece, 3/8\" drive, deep, 6 point, metric impact socket set. The sockets range from 8mm to 19mm. They are on a Matco clip rack.-Cornwell, 10 piece, 3/8\" drive, deep, 6 point, metric impact socket set. The sockets range from 8mm to 17mm. They are a little deeper than the previous Matco set and are on a basic steel clip rack.Shoot me an e-mail if you are interested. Location: Newportits NOT ok to contact this poster with services or other commercial interests |
|
MAC Global OBDII Scanner - $200 (Newport) |
Newport |
|
2009-06-29 10:31AM |
|
Hey all, I have a hand held MAC Global OBDII scan tool. The model number is ET9620, I dont believe they make this model anymore. My camera is broken so I have no pictures at the moment but it comes in a black zipper case with the original manuals and it works like new, it looks brand new as well, there is very little use on this scan tool. This tool is very handy, it covers all Global OBDII functions such as:-I/M Readiness-Pending Codes-Current Codes-Erase Codes-View Data-View Freeze Frame Data-O2 Monitor Test-Non Continuous Tests-On Board SystemsThis tool also allows one to record data, review data, print data and view vehicle info.Shoot me an e-mail if interested. Location: Newportits NOT ok to contact this poster with services or other commercial interests |
|
Bostitch Air compressor 2.0 hp 6.0 gal - $50 (hope valley) |
hope valley |
|
2009-06-29 10:28AM |
|
It works great ..In good condition I can email picture later if needed Location: hope valleyits NOT ok to contact this poster with services or other commercial interests |
|
nice brand new tool belt,used 1 time - $25 (woonsocket,ri) (pic)
|
woonsocket,ri |
|
2009-06-29 10:28AM |
|
Hello i have a tool belt thats brand new,i used it 1 time,it cost me $75,come and get it,just e-mail me and ill get right back to you with my number.thanks. Location: woonsocket,riits NOT ok to contact this poster with services or other commercial interests |
|
Welder, Tig, Stick, Plasma Cutter ( Welds Aluminum &other Nonferrous ) - $900 (Cumberland) (pic)
|
Cumberland |
|
2009-06-29 10:11AM |
|
160 Amp Welder. This is a welder inverter and will tig most all metals, alluminum, stainless steel, copper, alloy and carbon steel. It has a 40 Amp Plasma Cutter that will cut 1/2 inch steel. It is a 160 Amp. Tig Welder and 160 Amp Stick. The welder is like new and works fine. The picture is that of a 200 Amp Machine I replaced it with. I wil have pics of the 160 soon.The 160 looks the same with a few less dials. If interested, give me a call at: 401-480-1617........Tom Location: Cumberlandits NOT ok to contact this poster with services or other commercial interests |
|
???Gang-Box*??? - $100 (((Lincoln, RI))) (pic)
|
((Lincoln, RI)) |
|
2009-06-29 10:03AM |
|
Gang box I used in the back of my F150. Inside dimensions approx 24x24x48. Stands 27 1/2 high with feet. Could use a paint job to match your truck! \"*Junk inside not\" included. Call 401-725-9664. Location: ((Lincoln, RI))its NOT ok to contact this poster with services or other commercial interests |
|
radial arm saw - $125 (seekonk ma) |
seekonk ma |
|
2009-06-29 10:00AM |
|
10\" radial arm saw in ex cond for sale Location: seekonk maits NOT ok to contact this poster with services or other commercial interests |
|
CRAFTSMAN SANDER -ROUTER & GRINDER see pic - $65 (BLACKSTONE MA. 01504) (pic)
|
BLACKSTONE MA. 01504 |
|
2009-06-29 9:57AM |
|
Here I have three Craftsman items a double insulated router model #315.14780, grinder model #27, double insulated and a 1 1/2\" max wheel, Sander 315.11680 dual motion double insulated. All three run great. If interested please call AS THIS EMAIL IS RARELY CHECKED. BETWEEN 8 A.M- 7 P.M. AT 508-883-7971 OR CELL 1-774-292-1598. Location: BLACKSTONE MA. 01504its NOT ok to contact this poster with services or other commercial interests |
|
generator -looks miltary - $500 (ri) |
ri |
|
2009-06-29 9:01AM |
|
generator morse fairbank electric plant 2cyl. liquid cooled runs super nice unit no leaks or cracks or any problems 401 647-2469 3 kw Location: riits NOT ok to contact this poster with services or other commercial interests |
|
diamond hole bit 4-in. - $75 (ri) |
ri |
|
2009-06-29 9:00AM |
|
one drill bit for concrete hole saw thanks 401 647-2469 Location: riits NOT ok to contact this poster with services or other commercial interests |
|
Air Compressor 3 1/2 HP - $225 (Smithfield) (pic)
|
Smithfield |
|
2009-06-29 8:48AM |
|
Craftsman two piston portable air compressor w/20 gal tank, regulator. Wired with an Extra Service 220V 20AMP motor. This has a full crankcase,two pistons, holds oil and will supply enough air to run a handymans workshop Has adjustable limit switch with two air hook ups; one direct and one adjustable. Super for a small work shop or aux compressor and will run air tools, impact guns, spray equip, etc. It is ready to run and does not come with any accessories. Email any questions. I have the owners manual \"somewhere\" but cant locate it (CRS) so I do not know the CFM output, sorry. Location: Smithfieldits NOT ok to contact this poster with services or other commercial interests |
|
PACKARD 14" BAND SAW LIKE NEW - $400 (pic)
|
|
|
2009-06-29 8:41AM |
|
PACKARD 14\" BAND SAW 110 VOLTS 3/4 HP 1720 RPM....................$400 LIKE NEW VERY LITTLE USE 401-569-9823its NOT ok to contact this poster with services or other commercial interests |
|
Craftsman Table Saw - $165 (Cranston) (pic)
|
Cranston |
|
2009-06-29 8:04AM |
|
Craftsman table saw comes with extended table, fence and outfeed table. Runs great and is in very good condition!Please call Dave @ 401-383-4266drl14@hotmail.com Location: Cranstonits NOT ok to contact this poster with services or other commercial interests |
|
chain fall - $50 (bellingham ma) (pic)
|
bellingham ma |
|
2009-06-29 5:43AM |
|
chain fallmonarch$50.001-508-883-1670 Location: bellingham maits NOT ok to contact this poster with services or other commercial interests |
|
Vintage Wood Working Tools - $90 (Warwick) (pic)
|
Warwick |
|
2009-06-29 4:37AM |
|
There are 7 wood planes, 1-21, 3-16, 1-15 1-8 Ύ and 1-8. Included are 2-12 wooden levels and a small wood clap asking $90.00 for everything Location: Warwickits NOT ok to contact this poster with services or other commercial interests |
|
AIRCO CUTTING TORCH - $35 (west warwick) (pic)
|
west warwick |
|
2009-06-29 1:52AM |
|
AIRCO CUTTING TORCH, full size, A1 condition, rebuilt in 2006, $35, 401-821-1353 or Jo85@webtv.net Location: west warwickits NOT ok to contact this poster with services or other commercial interests |
|
Bench Vise - $35 (Westerly) (pic)
|
Westerly |
|
2009-06-27 12:27PM |
|
5\" heavy duty bench vise, new condition, never used.call Paul at 401-596-9140 Location: Westerlyits NOT ok to contact this poster with services or other commercial interests |
|
Black & Decker Polisher - $90 (Cranston) (pic)
|
Cranston |
|
2009-06-27 12:25PM |
|
Black and Decker new out of the box -- never used -- paid $158.36 -- if interested call Steven at 401-658-6767 Location: Cranstonits NOT ok to contact this poster with services or other commercial interests |
|
Today, Sat 6/27 Tool Sale (Warwick) |
Warwick |
|
2009-06-27 12:10PM |
|
I am selling an assortment of tools at 188 Brookwood Rd in Warwick, which is off Church Ave. There is a large varity from gardning to old tools and vises. Lanscaping, sanders.you name it. If you would like to come and check it out it runs from 1:30 - 4:00 Location: Warwickits NOT ok to contact this poster with services or other commercial interests |
|
Dremel - $50 (Taunton, MA) (pic)
|
Taunton, MA |
|
2009-06-27 12:06PM |
|
Dremel for sale. 2 years old and was used once.Details:Two Speed15,000 & 35,000 RPMComes with case and attachments.$50 OBO Location: Taunton, MAits NOT ok to contact this poster with services or other commercial interests |
|
Mechanics Tool Box - $900 (West Warwick) |
West Warwick |
|
2009-06-27 9:54PM |
|
Hi i have a 3 pc. 20 drawer w/ side car, roll away waterloo, orange mechanics toolbox. Bought it in last year used it for 2 months then got out of the trade. Has been in very good storage. Asking $900 but willing to discuss price if i get responses. Location: West Warwickits NOT ok to contact this poster with services or other commercial interests |
|
drill press - $100 (Warwick, RI) |
Warwick, RI |
|
2009-06-27 8:15PM |
|
Craftsman drill press in very good condition Model No.335.25987 Location: Warwick, RIits NOT ok to contact this poster with services or other commercial interests |
|
next
100 Listings >
|
|
|
|
Search
Create Post
Goto Image view