this is a miller 220v ac stick welder works great ill sell or trade make me an offer Location: clarksvilleits NOT ok to contact this poster with services or other commercial interests

I have a Caterpillar 416 Backhoe with a full cab and it is 4wd. It runs great, and has low hours. New fuel lines, new fuel lift pump, new hydraulic filter and fluid, and just rebuilt the injector pump. For sale or trade, it is ready to work today. Will trade for Harley, car, truck or anything else will be considered, let me know what you have. Email me at jroberts7888@live.com. Location: Ligonier, PAits NOT ok to contact this poster with services or other commercial interests

Looking to trade my Full Size Bronco 150k Miles... for a smaller SUV or truck. It runs great and inspected... 3\" Lift 35\" Baja Claws, and has the 351 V8.. Rear window works from key or switch. has a rust spot by Drivers door. It shows its age but not nearly as bad as most I have seen. I just do not need something that big any longer Let me know what you have and go from there... Prefer Photos... Location: Hermitageits NOT ok to contact this poster with services or other commercial interests

looking to trade my 97 ford crown vic for a 4wheeler 350 or bigger Location: normalville paits NOT ok to contact this poster with services or other commercial interests

I HAVE A 1991 FORD RANGER I WANT TO TRADE FOR A STREET BIKE I WOULD LIKE A HONDA 750 ANY YEAR WILL DO AS LONG AS IT READY TO RIDE BUT WILL CONSIDER OTHER BIKES THANKS Location: WASHINGTONits NOT ok to contact this poster with services or other commercial interests

This is a great oppurtunity in this depressed economy to save a few bucks on a new floor. I have owned a ceramic tile business for 7 years installing ceramic tile. I have job pictures on my laptop and tons of references. Get ahold of me within the next 1 week and I will tile ANY residential room floor for $500.00 for my labor you buy all the materials needed(cement board, tile, grout, mortar etc.). I am insured and have professional equipment. Email today to set up an install date! 1st come 1st served Email to: lakeshoretile1@yahoo.com serving Pittsburgh and surrounding areas. Location: Pittsburghits NOT ok to contact this poster with services or other commercial interests

Up today we have a dark green aluminum truck capIt was recently on a 96 F-150Asking $75 obo or trades. Let me know what you have Thanks for looking724-244-2169Call or Text for quickest response Location: Blairsvilleits NOT ok to contact this poster with services or other commercial interests

Need 4-12 cab 4ohm mono or 8ohm stereo.... I have for trade 2 12s in custom box.with 800 watt amp... R.Fosgate 8 in large custom ported box... Alpine 6x9... Power Acoustic 1/2 din DVD player(no screen)... Sony PSP(bundle pack)with 4 games 3 movies.... Memorex daul format DVD recorder.... Seven R.C. Cars 3 nitro 4 electric.... can get more pics if needed... CALL OR E-MAIL (412)526-2368 or MAJiKMIKE_9@MSN.COM Can you HELP me....... THANKS FOR LOOKING! Location: W. Mifflinits NOT ok to contact this poster with services or other commercial interests

parabody 350 home gym excellent condition....metabo die grinder brand new....new cost over 250.00.......full size diamond plate tool box.......gm turbo 400 torque converter made by fairbanks. new in box....B&M transpac for turbo 400 tranny.....also master rebuild kit for turbo 400 less front and rear seals and front pump seal..heavy duty aluminum ramp, 104 inches long by 19 inches wide Location: Cowansvilleits NOT ok to contact this poster with services or other commercial interests

2000 ford super duty 5.4 litre $9000 obo or looking to trade for a similar truck with a 7.3 powerstroke..... let me know what you got, maybe we deal... 724-664-8243 ron...... Location: cowansvilleits NOT ok to contact this poster with services or other commercial interests

very heavy duty aluminum ramp it measures 104 in. long and 19 in. wide. has angle on one end . not home made one. if interested please call 724 664 8243........ron Location: cowansvilleits NOT ok to contact this poster with services or other commercial interests

brand new metabo die grinder........model number GE700.......item number on tool is 06303420.......6.2 amp....710 watt........7000 to 27000 rpm......bought it and never used it.......maybe someone really needs this nice specialty tool......lists at over 250.00 at discount sites.........if interested call 724 664 8243.......ron..........$200.00 obo or trade for whatever Location: cowansvilleits NOT ok to contact this poster with services or other commercial interests

Have 5 work / grow light that are 400w and work on 110v, 240v 277v, ect. they all have the bulbs and are in working order.I am asking $50 each or best offer or as always an offer to trade.Thanks Mj724-331-2241 Location: West Newton its NOT ok to contact this poster with services or other commercial interests

300,000 BTU pool & spa heater. its the 300 minimax millivolt works on propane. Its had been uesd for 2 years will keep your pool very hot if you like the warter that hot..can be uesed for inground pools and spas paid $1,200 for it and I am asking $500 or best offer.Thanks and look forward to your offer or trade 724-331-2241 Mj Location: West Newtonits NOT ok to contact this poster with services or other commercial interests

Machinist tools over 2000 replacement cost Starrett,Fowler,Interapid and some off brands all in great to barely used condition will sell for 1000 or trade for ???? not going to give away but not asking new prices so if you know your tools please no low balling thanks for looking Location: westmoreland coits NOT ok to contact this poster with services or other commercial interests

i will trade profesional custom tattoos for drywal service and help...if u can do general contract work that will help i bought an old hose and need help!!see more pics at www.myspace.com/fuck_the_browns for online portfolioi can do any type of tattoo i will trade for random shit to if its worth while..i like all kinds of shit..let me know if u got something worth while.id prefer a phone call 724 971 5126 ask for willthanks i can do portrait tattoos as well

I have a nice Banshee that I would trade for a dependable Cherokee or Wrangler. Wy wife needs a winter vehicle so I am willing to part with my ATV.IT has :Dura blue X-33 Axle with hubsBillet Bead lock wheels (rear) with 18\" MX holeshotsEyeball engineering Round housing swingarmLonestar +2 a-arms Steel braided brake lines (front)Ohlins Shocks /w res. (front)Douglas .190 wheel front with 19\" holeshotsSteering stabilizerToomey Rad.FmF Pipes and silencersPolished grillePro taper bars High Cr bend ( i think)Twist throttle with Tors eliminationIdle kitBoost bottleV-force reedsCool headPro peg nerf barsDura blue Sprocket hubAC BumperNew K&N filter w/ outerwears.Gunner kill switch Poly chain guideI will throw in extra wheels and tires too. 6 ply Razors on stock wheels.

I HAVE A I POD SOUND CONCERT TO GO. IT HAS AM/FM RADIO, TAKES BATTERIES, OR AC POWER, CAN DOCK YOUR IPOD ON TOP TO PLAY MUSIC OR VIDEOS. I DO NOT HAVE THE REMOTE, CANNOT FIND IT... THIS UNIT HAS AMAZING SOUND AND IS JUST ABOUT NEW. I HAVE THE BOX, BUT THE MANUAL GOT RUINED. IT IS WHITE AND WORKS GREAT.THE IPOD IN THE PIC IS NOT INCLUDED... 36 WATTS OF POWERVIDEO OUTPUTAM/FM CLOCK RADIOCHARGES AND SYNC I PODMADE BY DREAM GEAR www.dreamgear.netretail is 129.99 call 724 205 3822 I WANNA TRADE SOMETHING OR CASH.....

I have a Yamaha Gizzly 600 4x4 for barter. The quad is totally redone. Brand NEw Tires, New Disk and shoes. All New Brake Cables.. Plastics look great.. Fully Automatic actually its called an ultramatic.. Has HIgh, and tower up a mountain low gear. Has reverse also. Tow hitch (and i have a brand new one, so two) HIgh and low beams, tail light, A 250$ aftermarket exhaust which screams! NOt beaten... $3k cash very firm! Would rather barter with something of equal or greater value....The Year is a 2000. but looks and runs better than a new quadI put alot of hours into this quad and I only want the best trade.. NO JUNK! Im not bartering junk so please do send me offers of JUNK. Thank yoU.. Nice Cars are put on top of my LIST OF Wants. Pictures are a must to rottyrock123@gmail.com !!!!LETS BArter!

Up for sale is a set of 4-22\" chrome Hummer H2 wheels. They are in nice condition but do have some slight pitting. For the price this is an awesome set of wheels. Centercaps are included. Please call at 724-261-1464. I am also willing to trade, what do you have???

For sale or trade is a 1993 Chevy Suburban. 383 stroker motor with less than 10,000 miles backed by a 700r transmission. 12 inches of lift with all new front end parts. Also has new 39.5 trexxes tires, not pictured. Will consider trades for older muscle car or cruiser bike. Call Chris at 330-240-1972 with any questions.

This is a good buggy for anyone. It’s a 150cc four-stroke motor with turnkey start; it has full independent suspension four-wheel disk brakes (plus e brake). Have running lights, brake lights, headlights, high beam and low beam, turn signals, horn and Speedo. Top speed is 45mph with one adult and it still does well with two. I also have allot of upgrades on it, racing cdi, high output coil, uni air filter cold air intake, big gun evo exaust, 134.7 carb jet (stock jet 110), prodigy clutch, 8 gram rollers and I also have a camo top for staying dry in the rainy season (covers the full buggy with zip out doors). Also has reverse and I just replaced the front tires. I also have all the sock parts for it and a parts list with prices. Im selling it because the wife wants a quad. I will trade for any sport quad that has electric start, I don’t mind if it needs work.

I HAVE TWO TEN INCH KICKER SOLO BARIC L5 SUBS \"ONE OF THE SUBS IS BLOWN\"! I WOULD LIKE TO TRADE FOR AN CAR AMP EMAIL ME AT SMUKGEE@GMAIL.COM WITH OFFERS.

hoyt mt-sport bow make offer if interested 27.5-30.5 draw, and 60-70lb weight, zr 200 split limbs, Solo Cam, stabilizer, and release bodoodle rest(pretty sure), and trophy ridge sight with light(again pretty sure). string waxed every 6 months, but bow hasnt been shot in a while. will trade on something that goes bang (NOT interested in bolt, or semi .22s, russian military stuff, and single shot shotguns),or possibly an aluminum boat, or sell for $200

I have Big Ben & Michael Jordan They are from the Japanese artist \"Haiyan\" would take $125 for both or Task Trade........ No Reasonable offer refused 724-550-4083 or email Ron Thanks for looking........ Will Also TRADE for ? ask it cant hurt Call and make offer!!! BIG BEN IS GOING TO THE SUPER BOWL

2 TOROS AND AN MTD. 1 toro ran good last year. 1 I bought at a yard sale last summer, dont know if it runs or not. The MTD ran good last year also. $350/OBO for all, or $150 each separate. Only have 50 of sidewalk, why do I need a snowblower???? 412-264-8744

Hello, I have a working laptop, that I would like for trade for a working PSP Slim free of scratches or defects. The slim is the 2000 model, that is slimmer than the orginal PSP. The laptop is in great working condition, and the battery life is still pretty good. The trade will include the A31 laptop and power cord.

We are looking to trade a laptop for enough money for Playstation 3, that also pays Playstation 2 games. Here are the specs on the laptop and pictures. I will accept cash offers or a Playstation3. The monitor is a LCD 17\" inch with power adapter and vga cable. The laptop and monitor are in great shape. The screens are clear of scratchs, and the cases are in good shape. Please reply to the email with your best offer. - Intel Pentium M Centrino 1.6GHz - VERY FAST!!Pentium M runs faster than equivalent Pentium IV and uses a lot less power!!- 512MB RAM- 40GB Hard Drive- 14\" XGA Display (1024 x 768 Resolution)- 32MB ATI Radeon Mobility 7500 Video Adapter- 56K Modem- 10/100 Network Card- DVD Player- AC Adapter Included- Battery appears to hold a charge. (Batteries are not warrantied)- Loaded with Windows XP Pro and the latest updates.- Sorry, discs are not provided.PORTSVGA - AC - Parallel - USB (x2) - S-Video - 56k - 10/100 - Audio - PCMCIA (x2)

im looking to trade my Integra i consider it a running project, was planning on restoring it fully but was laid off, sell or trade, i need something that i can drive back and forth to where ever i need to go for work, will trade for truck or 2dr coupe, even a jeep, let me know what you got, will send more info and pictures if requested, three qaurter size spots of surface rust, thats it, front driver fender dented from someone backing into it. No Lower than 1200, first in cash gets it THIS CAR IS NOT INSPECTED BUT DOES RUN Needs alignment, new tires, yellow turn signal bulbs since it has 3 piece clear headlights, and does need a new throttle position sensor So no one keeps asking, this cars odometer stopped at 187k title says 225 for safety measures, its a Honda engine, so its still young Some Info ~~~~~~~~~~~~~~~~~~~~~~ Engine-1.8L 5-speed Stage four six puck clutch cold air intake msd ignition