Selling off the last of my Snapon tools. Included in this bundle is a hacksaw with 6 extra blades, a 7/8 inch spark plug socket (Aircraft spark plug socket) 1/4 to 3/8 adaptor a 3/8 to 1/2 adaptor, 3/8 drive 6 inch extension and 3/8 drive universal joint. Ball peen hammer , duck bill and needle nose pliers. And a very nice set of Automatic wire strippers. Other item included is a scribe with straight and 90 degree tip and a magnetic pick up tool..... And a dual cut file. All are in real good condition except the file which has light surface rust on itAll items are Snapon or blue point (which is also snapon)This would be a really nice and cheap gift for dad!!!Asking $50 obo .... Respond to ad or call 971-239-2225its NOT ok to contact this poster with services or other commercial interests

10 mm 3/8 Black and Decker reversible drill. Model 1180-90/100, 1200 RPM Location: Keizerits NOT ok to contact this poster with services or other commercial interests

Lumber Rack, 2 piece, fits full size truck.62 1/2\" wide inside channel24 1/2\" high front rack17 1/2\" high back rackCall 503-874-1219 Location: Silvertonits NOT ok to contact this poster with services or other commercial interests

Chicago Industries CI-CT520D (not harbor freight)Company Website: http://www.chicagoindustries.com/products_pc_ci-ct520d.htm Mosfet Technology with Toshiba Mosfet Operating Dual Voltage: 208/220vac 50/60HZ Input Single Phase 1PH 110/120vac 50/60HZ Input Single Phase 1PH 50amp cut draws 25Amps 40amp cut draws 22.5Amps 230V No Load Voltage, 100-115V Working Voltage Plasma Cutting Specs: 3\" Per minute @ 1\" Steel (Severance Cut) 7\" Per minute @ 3/4\" Thick Steel 17\" Per minute @ 1/2\" Quality Cut 50 Amps Plasma cutter: Duty Cycle 60% at 50 Amps and 100% at 40 Amps. 3/4 inches clean cut with 7.2 inches per minute; 1.0 inch severance cut with 3.1 inches per minute. Rated Output Current is 40Amps under both AC 110V and 220V. Works in both 50 and 60 Hz with operating air pressure 65 psi @ 3 cfm. Welder Specs: TIG and Arc Welder 200 Amps DC Tig Welder: Duty Cycle 60% at 180 Amps ARC and 100% at 95 Amps ARC. Gas Flow: 2-5 L/Minute. It can weld all stainless steel. 150 Amps Arc Welder: Duty Cycle 60% at 150 Amps and 100% at 90 Amps. DC welders do not weld aluminum. High Frequency and Contact Start: High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. High Frequency Plasma cuts faster with less distortion in your metal. Internal High Speed Cooling Fan to Regulate Temperature. Unit has built in Thermal and Overload Protection,built-in compressor. This IS NOT A HARBOR FRIEGHT unit, it is on par to the quality of Lincoln, ESAB,Miller,hobart or other well known brands,but for less than 1/2 the price,this is the latest Japanese technology! Weight: 40Lbs(44LBS Boxed) Dimensions: 19 \"Length x 8 1/4\" width x 12 1/4\"H What is Included?Main Unit Cutting Torch TIG Torch Stick Holder Ground Clamp Air Regulator with Bracket Air Hose Consumables: 3 piece tips 3 piece electrodes 3 piece gas diffuser 3 piece shield cups!! Price:$825 w/1 year warranty!!!! **CAN DELIVER** 541-570-9170 cell, **also have Plasma cutter for sale **if you see my ad, then it is still available!! i will delete it when sold! Location: Albany, ORits NOT ok to contact this poster with services or other commercial interests

I bought this at a yard sale and never used it. Im just selling it for what I paid for it.If youre interested, please email me or call me at 503-689-5162 Location: West Salemits NOT ok to contact this poster with services or other commercial interests

Brand new Delta Band Saw, never been used, just taken out of the box. Still have paper work. $100. 503-507-5477 John Location: Salemits NOT ok to contact this poster with services or other commercial interests

Only used once and dont need anymore in great shape $90obo. 503-507-5477 John Location: Salemits NOT ok to contact this poster with services or other commercial interests

For sale 18v snap-on 1/2\" cordless impact $450 obosnap-on 7.2v cordless screw driver $100obo<bplease call eric 503-551-8174 with any questions thanks. Location: mt. angelits NOT ok to contact this poster with services or other commercial interests

10 Band Saw like new condition------------65.00 Contact Sharon @ 503-507-6808 if interested. Location: Keizerits NOT ok to contact this poster with services or other commercial interests

mac chainsaw all parts in box. the pic is of the same saw put together. $25 scp77@comcast.net Location: salemits NOT ok to contact this poster with services or other commercial interests

Craftsman router table, $10.00503-871-8071 Location: Salemits NOT ok to contact this poster with services or other commercial interests

Engine stand $30.00503-871-8071 Location: Salemits NOT ok to contact this poster with services or other commercial interests

TABLE SAW...ASKING $100.00....CALL LEO AT (503)932-1684 Location: SUBLIMITYits NOT ok to contact this poster with services or other commercial interests

Has a newer 10 hp motor. Used it in a 3800 sq. ft. cabinet shop. It did real well. Shut shop down. This is the only thing left.503-400-2437 Location: SE Salemits NOT ok to contact this poster with services or other commercial interests

255mm, heavy duty contractors model, good blade, moving . no checks please thank you Terry Location: Keizerits NOT ok to contact this poster with services or other commercial interests

THIS IS A NEW BATTERY THAT A FRIEND BOUGHT FOR HIS MILWALKEE DRILL THINKING IT WAS A UNIVERSAL FIT.OF COURSE IT IS NOT AND THEY WOULD NOT LET HIM RETURN IT BECAUSE HE OPENED IT.its NOT ok to contact this poster with services or other commercial interests

I have a 2 ton engine stand and load leveler. The engine stand has been used a few times but the load leveler has not. I had a ford 390 big block with all accessories on the stand and it held like a champ with out any sagging. Load leveler comes with chains and in perfect working condition. I also have a new universal freeze plug installer/remover kit that I will throw in for an extra $20 if you buy the whole lot or will sell separately for $70. If any question call me 503-508-6296 and I will consider any reasonable offers. Location: Monmouthits NOT ok to contact this poster with services or other commercial interests

Trailer is the bed of a GMC Sonoma with a canopy on it. It is very lite and one person can move it around with ease. It tows like it isnt even there. It has some damage on one side but it wouldnt be hard to fix. Asking $150 obo. I dont check my email much so if youre interested please call me (Rick) at 971-240-2571. Thanks for looking Location: Salem, Oreits NOT ok to contact this poster with services or other commercial interests

QuickReach Max 7.5-ft. to 12.5-ft. Pole attach your airless gun and allows you to reach up to 12 ft. you can paint a 2 story house without standing on a ladder.I paid 260.00 for it.asking $100.00 obo call 503-689-1642. I have a QuickReach Pro 5.5-ft to 8.5-ft. Pole also so if you want a shorter one instead i would be willing to sell that one instead, I just want to hang on to one of them.

EG2200X Honda Generator, 110 volt, 8.3 amp D.C. 12 Volt charger, low oil shut off, automatic voltage regulator, one gallon fuel tank.works good, used it for my construction business, light weight and portable.cal 503 689-1642

Slightly used, less than60 hours, excellent sprayer. comes with 125 ft of hose,only came with 50 ft,I bought another 75 ft and I also bought a graco gun for it, I paid almost $175.00 for the gun alone. I Paid almost $1300 for sprayer, extra hose, and top of the line gun. Selling for $500.00 OBO. call 503-689-1642.I also have an extension pole for a spray gun that will extend From 8ft-16ft.You can attach any spray gun to it and paint a 2 story house without stepping on a ladder. I want $75.00 for it.

Table Saw! It’s in ok Shape, don’t ever use and need the space in my shop. If your interested then contact this poster for pick up information, in NE Salem.

This is a 120V Makita grinder with a 7\" wheel. Great condition.

This is a 70A wire feed welder made by Mastercraft. $150.00 OBO.

LOT 2 EA. USED JET L-90, 10 TON CHAIN HOIST, YOU GET BOTH FOR ONE PRICE. GOOD WORKING UNITS! CALL JOHN FOR ? (310)717-1514

I have a used Cordless Dremel with battery and charger. Everything works fine, I just dont use it anymore. Its a little dirty from being used but nothing out of the ordinary. It is a 9.6v model 780 adjustable speed from 5000-25000rpm. Much better than being plugged into the wall all the time. This sells on E-bay all the time for 60.00 new. This one is used and Ill guarantee it works fine. I hate e-bay because of id- theft. Save me the hassle and Ill save you the money. 30.00 firm. Complete with case.

CRAFTSMANS SOCKETSASSORTED SIZES & LENGTHSMILLIMETER & STANDARD SIZESUSED SOCKETS ONLY 1-2 YEARS OLDGREAT CONDITIONYOU KNOW THAT THERE IS A LIFETIME GAURANTEE ON CRAFTSMAN TOOLS!SINGLE SOCKETS FOR SALE 1.00.EA OR:BIG GRAB BAGS FOR SALE $88 PIECE MM SIZE GRAB BAG FOR $$68.00 THAT’S A SAVINGS OF $20.00BIG GRAB BAGS FOR SALE $99 PIECE SAE. STANDARD BAG FOR $$68.00 THAT’S A SAVINGS OF $20.00CRAFTSMAN SOCETS ARE GOING FOR $3.99ea. AND UP SERIOUS INQUIRIES ONLYCHECK FOR YOURSELF AT http://www.sears.com/shc/s/v_10153_12605_Tools?sbf=Brand&sbv=Craftsman&psid=16258806&sid=ISx20070515x00001aIF YOU ARE INTERESTED IN PURCHASING OR HAVE QUESTIONS EMAIL ME!

This is a brand new Jet floor mortiser with closed stand *** STILL IN PACKAGE *** You get the receipt so you can register it with Jet. This usually sells for around $900 including most internet sites. It is heavy - around 288 lbs. - so bring a buddy. * Heavy-duty cast iron and steel construction provides durability and stability during use. * Dependable rack-and-pinion head adjustment gives accurate drilling control. * Long, multi-position splines lets user reposition the feed handle.Email me with any questions

DeWalt Model DW073 Rotating Laser like new condition, 18 Volt with (2) batteries, laser detector, charger, laser enhancement, glases & carrying case. Invaluable for suspended ceilings, wainscoting, wallpaper borders etc. I bought this new to install a suspended ceiling. It has been used once. Asking $250.00 (OBO)Call 503-910-2170 or respond to Craigslist Ad.

Ive had this box for about six months and never use it except for an overflow of tools I dont use too often. I paid $1050 for it new and am taking a hit by selling it but my hangar is too crowded for everything so I must sacrifice. Its in real good shape except for a couple of rub marks (see pics). It has been stored in a climate controlled aircraft hangar, I just brought it home about a week ago.... It comes with two keys. It has 9 drawers and top storage. Im asking for $500 obo. about half of what I paid for it ...for more info go to:http://buy1.snapon.com/catalog/item.asp?P65=&tool=storage&item_ID=85855&group_ID=17761&store=snapon-store&dir=catalogCall John @ 503-363-2146 if interested NOTE! Tools are not included*!!!

generac generator with low hours but i left the valve open and gummed up the carburator so it will need a little minor work , 200.00 obo trade, guns, knives, fishing, tools?????

Like new Greenlee Heavy Duty steel fishtape 200.....Cost is $ 50.00 Dollars.....Please call 503-999-9060 with any questions....

Older air compressor with newer motor, brand new 50 air hose, new brass couplers, unit used daily....Cost is 50.00 Dollars..Please call 503-999-9060 with any questions...

Air mover/carpet dryer. The screen is missing on one side, but it still works. 503-932-5278

WORKS GREAT,HONDA 5.5 GAS AIR COMPRESSOR.100 PSI.WORKS GREAT.$200 541-401-5413

We have for sale a Ritter Edge Sander. 4 x 132. 1 1/2HP. It is in good and working condition. Selling price is $800.00 Cash Only!

We have for sale a good working Dodds dove-tail machine. Price is $3500.00 Cash Only!

These were purchased over the last 5 years. The set includes: 2 1/2 in. drills Model #PA6-gf35 3 61/4 in. Skill Saws Moldes #PA6-gf33 1 Reciprocating Saw Model# PA5-gf38 1 Miter Saw Compound Model# 0007-857 2 Chargers Model# BC-004 1 Hour-7.2-24 Volts 5 Batteries-24 Volt Bosch Power Paks Model#BAT-031-2Yrs. Old 1 Flashlight Model# ABSIf interested please call 503-551-3828. Thank you.

Used Gorrila tool bench 4 foot wide 75$

DEWALT DW744 Table Saw for professional cutting versatility on the job site or in your work shop. This portable table saw features an exclusive telescoping fence which delivers 24-1/2 inch rip capacity and speedy, smooth, and skillful adjustments. It’s crafted with a heavy duty, high torque motor and an efficient dust collection port. Included is: 10 inch, 24 tooth carbide blade; folding table saw stand (DW7440); miter gauge, instruction booklet.

Table Top Drill Press. 1/3 HP motor. Adjustable speed pulley system 620 to 3100 RPM. Safety power switch. Adjustable table with tilt. Drill to depth stop. With instruction manual and work clamp. (Table NOT included)

Jet model JWBS-14 Closed Base, 1 HP, 110V or 220V, currently 110V,includes optional rip guide. Only used a few times (less than 3 hrs max.) Need to make room in garage. Would deliver in Salem or surrounding area $10.00. Price $395.00 Firm