Tool marked Phila 34 PA 048 on one side and F118. The tool has a rotating screwdriver and built in 5/8 lock wrench, 3/4 cap wrench in handle. I also have pump couplers and 300 assorted oil furnace nozzles. 360-635-2220 Jim Location: Vancouver, WAits NOT ok to contact this poster with services or other commercial interests

175 o.b.o. will demonstarte that it works, needs a little tlc please call 360-696-8570 or 360-773-3447. VANGUARD 9 HP. WITH WAND AND HOSES AND ATTACHMENTS. IF YOU WANT IT COME MAKE AN OFFER, THIS WONT LAST LONG AT THIS PRICE. Location: vancouverits NOT ok to contact this poster with services or other commercial interests

Grandpas workbench has 2 wood screw vises, 8 drawers and a tool recess Dimensions are 7Lx2Dx32\"H Built to last another 100+ years $400 Art 360-904-1087 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Craftsman 30 gal compressor150 psi2hpoil free3 yrs oldruns excellentfirm on price Location: vancouver waits NOT ok to contact this poster with services or other commercial interests

Powerfull 12\" Dewalt cut off saw. Cuts through thick solid oak with ease, wont even slow it down.Great saw for a lumber yard or any shopRUNS ON 110 volt or 220 volt power$500.00 OBO or you may have something interesting to trade that I could use Location: VANCOUVERits NOT ok to contact this poster with services or other commercial interests

Model DG-2000 ,similar to Honda EU 2000 (but this ours has more output) Engine TypeForced Air-Cooled, 1-Cylinder, 4-Stroke, OHV Displacement133cc Max. power output2.6KW/5000RPM Rated power output 3.0KW/5500RPM Ignition systemT.D.I Starting systemRecoil starting Fuel tank capacity 1.8 gal Continous operating hour7.5 and 16hours at 1/2 load Noise (7m away)65dba Generator Rated output frequency50HZ/60HZ Rated output voltage230V/120V D. C. Output12V 8.3A A.C. Output230V/120V **puts out \"SINEWAVE\" electricity, for sensitive electronics Dimensions Total length 22\" Total width 11 3/4\" Total height 19 1/2\" Net weight 60lbs Standard Features Auto voltage adjustor , Oil alert system, Curcuit breaker , Circuit protector, **this is NEW in Box at less than 1/2 the price of Other Invertor generators*** 503- 8 8 8- 5 4 2 7 or 2 5 3- 9 5 1- 1 9 4 5 also have a 1kw Location: portland/vancouverits NOT ok to contact this poster with services or other commercial interests

very large arborist hand sawcall 360-696-4141 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

New and Never Used YardMan Lawnmower.It needs a minor service job, due to difficult startingFeatures the Automatic Wheels, Quick Stop Release, & Clippings BagPaid $269, and never bothered to get it fixed due to having another Mower.Call Alex at 360-433-1258 for an easy pick-up. Location: East Vancouver/Fishers landing areaits NOT ok to contact this poster with services or other commercial interests

See features listed below. These are model #334. They have never been used but have been in storage and show light shelf wear. All the straps, etc are present. These retail for $166.00 plus shipping online. Must Sell so you can save! $114.00/offer. Email this posting or call 503-708-1902 or 360-574-1230. Thank youFeatures: * Forms to the contour of the leg to provide protection from the knee to the instep of the foot * Sponge pads, top and bottom inside add comfort, absorb shock * Approximately 1.5 lbs. per pair * Shin guard with attached knee guard and instep guard * All guards except the Shin Guard are attached with a web sponge rubber hingenee Shin Instep Guard PlasticGet comfortable protection from the knee to the instep of the foot with these Plastic Knee Shin Instep Guards.Manufacturer: Ellwood Safety Appliance CoList Price: $166.00 Location: Hazel Dell area, Vancouver, WAits NOT ok to contact this poster with services or other commercial interests

These are the best shears available for working with cement based siding products. Mine are like new. They were used to make four cuts. Now they can be yours for $150.00.Chuck (360) 574-7763 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

worksite box mdl 656990.Superior strength to resist break-ins Bolt cutter free locking system. Super-duty hinge resists forced entry Extra-strong bottom bolsters for heavy loads Rain drain system protects contents Grip rite channels resist damage. Dimensions in (lxhxw): 48\" x 33 3/8\" x 30\" Local pick up cash or cashier check Location: vancouverits NOT ok to contact this poster with services or other commercial interests

For Sale is a 24 pc. Wrench set. Goes from 1/4\" up to 1\" and 7mm to 22mm. Give me a call if interested.(360)936-2451 Location: Vancouver, Waits NOT ok to contact this poster with services or other commercial interests

Miller Legend almost new, only 12 hours use, 5000 watt Gen.Set at 1800 rpm, 120V & 240 Volt. its also a 200 amp Stick Rod Welder, Running Gear & Canvas Cover, 50 ft. of stinger and 20 ft. of ground 1/0.Has 18 hp. Onan with electric start, imaculate condition. Original purchase for Y2K... never used. Battery Tender leads attached to new battery. Give 20% more power for 15 sec. at start up for starting well pumps etc. Location: Vancouver its NOT ok to contact this poster with services or other commercial interests

TILE CUTTER, FLOOR AND WALL, 13 INCH. NEW, IN THE BOX, NEVER BEEN USED. $10, 1-360-256-6114 [DSCN9346 42 44 45] Location: Vancouver/Orchardsits NOT ok to contact this poster with services or other commercial interests

stainless steal finish on the carpet dolly holds up 2000 pounds could be used for lots of things great for carpet thoe.i have two and i only nead one $ 75 obo 360 600 9889 will consider trades. Location: vancouverits NOT ok to contact this poster with services or other commercial interests

Mitutoyo Indicator #513-242 .0005\" $75.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

Magnetic Sine Plate 100 millimeter centers $500.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

Dowel Pin Reamer Set .1230 .1247 .1855 .1870 .2480 .2495 .3105 .3125.3730 .3745 .4355 .4370 .4980 .4995 Made in the USA $75.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

18\" Mitutoyo Height Gage #191 New Price is $1900.00 asking $700.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

2-3\" Starrett Micrometer #436 $75.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

1-2\" Starrett micrometer # 226 $65.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

Precision Machinist Vise 2.75 H x 3.0 W x 7.50 L $50.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

Starrett Depth Mic #445 1 - 3\" New $200.00 $100.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

Starrett Trammels with Carbide tips #69A $30.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

4 Flute Mill Cutter 2\" with 5/9 shank $100.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

New Metric Drill Set 1 - 13mm $75.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

Oldak Indator 0-1\" Model # ALS18 $45.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

Metric Drill and Tap Set M2.5 - M12.0 $70.00 Location: Vancouver USAits NOT ok to contact this poster with services or other commercial interests

used Torit Dust Collector. Looks like hell but is structurally sound. It has a 3 horsepower, 3 phase motor. You will need to supply your own starter switch.It basically needs to be cleaned up and painted, some simple gasket material and should be a great machine for a small cabinet or woodworking shop. If youre looking for a good dust collector at a great price and not afraid of a little bit of a project, this one is for you.This is a cyclone collector with filter bags (included but not in the photo) and is ideal if you want to hook up to multiple machines but some create fine dust (sanders, saws, etc) and others create chips (planers, shapers, jointers, etc.)If this doesnt sell as it is, I will eventually do the work needed (paint & gaskets) and easily sell it for $1,200-$1,500.

HeaterWorkforce 80,000 BTU/hour propane heater. Model HD80AIt works great and has probably been used less than 20 hours. I bought it new to heat my 2 car garage, but it gets it so hot in there that I have to leave the side door open and it still gets too hot on the lowest setting.Complete with regulator and a hose that is about 6 feet long.I will also include a fairly new propane cannister (I am pretty sure it is empty).Shows use, but is in good condition and works great. Piezoelectric startIf we can russle up some propane, you can try it out before you buy.Yeah, its not space heater season, but you know youll need it when winter arrives. Keep your fingers from freezing from freezing this winter in your shop.$50 firm. No tradesDan (360) 773-8629  Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Good afternoon. Up for sale is a 30+ year old bagging lawn mower (Snapper Hi-Vac model with a Briggs & Stratton Engine). This lawn mower is well kept and was running perfectly until last year when I forgot to winterize it; now is it difficult to start it and keep it running. If there are any machinists/mechanics out there who want to fix this up, it would be a very cheap lawn mower to purchase. See pictures below.I accept cash only and would prefer that the buyer come pick up the lawn mower him/herself; all sales are final. I would be happy to help you load it up if you need an extra hand.Please contact me in you are interested. Have a good day. Location: Vancouver, WAits NOT ok to contact this poster with services or other commercial interests

BRUT SANDBLASTER MODEL 300H, LIKE NEW $700.00 ONLY USED 4 TIMES CALL MARK 503-737-9944WITH 25FT OF SANDBLATING HOSE, 100 SUPPLY HOSE, MASK & NOZZLES-PLUS APPROX 750# OF 36 GRIT ALUMINUM OXIDE MEDIA- Location: Vancouver, WAits NOT ok to contact this poster with services or other commercial interests

Tilt-Lok™ 7-1/4 in. Circular Saw im selling this saw need the money dont need saw anymore it in great condition if interested please call 425-512-5591 Tim6390-20 Voltage 120 AC/DC Amps 15.0 Blade Size 7-1/4 in. No Load Speed... 5,800 RPM Spindle 5/8 in. Metal/Wood Cu... Wood Spindle Lock Yes Location: vancouverits NOT ok to contact this poster with services or other commercial interests

cold heat solder iron used one project (971) 285 0698 Location: vancouverits NOT ok to contact this poster with services or other commercial interests

I have a 15 amp table skilsaw that I only used several times. It looks and works like new. Asking $80. If interested please call 360-991-7174 or 360-695-5936. Location: Vancouver, WAits NOT ok to contact this poster with services or other commercial interests

I am selling my Craftsman Torque Wrench because I just purchased the digital Torque Wrench from Craftsman so I no longer need the manual wrench. Still in like new condition, never dropped, calibration is still in good shape. 3/8\" drive goes up to 75 ft/lbs Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

I hate to see it go but bills come first. For sale is a Dewalt air compressor Heavy-Duty 1.2 HP Continuous 4 Gallon Single Tank Electric Hand Carry Compressor - D55155 This item shows signs of minimal wear paint scuffs ect. Still in good condition and well taken care of, about a year old or less. I bought it new. retailed 429.00 on average. Also comes with a 150ft of air hose. Dont miss out on this great deal. $250.00 with air hoses. $225 with out air hoses. here are some specs I found. Features: 4.5 CFM delivered @ 100 PSI pump recovers in under 15 seconds New ergonomic design for easy portability Protected components for maximum durability Oil lubricated pump allows for increased life Ball valve drain allows for quick and thorough tank draining Convenient cord wrap for easy storage High-flow regulator for increased performance ASME coded 4 gallon OSHA recognized tank cCSAus approved Dual soft start valves assist in cold weather start up Warranty Information Horsepower 1.2 Continuous HP Drive Direct drive Tank Size 4 single ASME tank gal Power Supply 120V AC, 15 amps, 60 Hz, 2 pole induction motor CFM @100 PSI 4.5 CFM Pump Speed 3,400 rpm Tool Length 21.75 \" Tool Width 23 \" Tool Height 12.5 \" Tool Weight 61 lbs Shipping Weight 71.25 lbs Includes: DEWALT Compressor Oil control panel with 2 universal quick couplers Dont hesitate to call or e-mail. Thanks Josh 360-607-6634 Location: East Vancouver,162ndits NOT ok to contact this poster with services or other commercial interests

2\" sock , 2Jacksons boards and more. 360.773.1187 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

This is the post hole digger you have been dreaming about.Click image for larger size Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Floor Scraper removes old tile, adhesive, vinyl, carpet and other floor covering materials. 4\" wide blade. Made in USAClick images for larger size Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

near new size 8 wide work boots.call garry at 360-921-0446 Location: vancouver washits NOT ok to contact this poster with services or other commercial interests

Serious inquiries only. Too many tools/sets to list all…here is a few of what is…Air tools: Craftsman ½” drive impact gun3/8” drive ratchetAir hammerMisc. screw drivers½” drive ratchet set w/extensions3/8 drive ratchet set w/ extentionSnap on: ½ & 3/8 drive socket setsMisc. adjustable wrenches, pipe wrenches…..Refer to pictures. Must pick up….will not deliver…cash only…local only…will not ship either. key knoxx for others listedother pics on request...could not post all Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Carpenters Tool Apron with reinforced pockets, tape measure pocket, knife holder. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

This van runs and drives GREAT!! It is just an old contractors van though. It has good tires all around. Inside, there is a 7,000 watt industrial generator mated to an industrial 4 cyl Kohler engine. It runs 110 volt AND 220 volt. Also inside are 2 onboard air compressors. Everything works and starts right up. This would be a good vehicle for a contractor, or park it at your cabin or on your property to power your home. I want $2000 for it but might take PART trade Call me at 360 314 5535 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Delta Shopmaster veriable speed; 400 to 1800 rpm; 110 volt; 20 inch opening; like new. 503-780-9093/360-576-0709 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Saw has been sitting in a barn covered with hay shavings. Its 21\" wide by 31\" deep by 23\" tall, 3450 rpm, 1 phase radial arm saw. Plugged it in and it runs, it has a blade on it but probably needs a sharper one. Model #: E 37845. Motor model #: KS48YZDG-176. Please contact my email: purringbird@email.com Location: VANCOUVER, WAits NOT ok to contact this poster with services or other commercial interests

Great ConditionPerfect for small jobs Doesnt take much space Factory rebuilt motor. Does not include pumpI just dont need it anymore. Call Ben @ 503 330 0968 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Come get it for 35 bucks. The engine runs, but there is something wrong with it. No idea what is wrong, in fact, it just sounds bad. Bad piston maybe? I personally think that it can be easily saved in the hands of the right person. There is no head that comes with it. If someone knows how to fix it up, it would be a Stihl of a deal. ;)35 OBO. You pick up in Vancouver near Mill Plain/205. Will deliver for $10 plus gas. Stihl Trimmer FS 85X Weed Wacker Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Selling a Fan/ Turbo Blower with two plug ins for your other tools that you would need at your work station... i.e. soldering iron, heat gun, drop light, etc.... It has the MAC tools logo on both sides. It is compact. It has 3 power settings. it has clamps attached to hold a drop light. very nice for the summer time working in aircraft or cars or boats or whatever you work on, even makes a great household fan. Portable Fan Blower Model: ZBLW180 120 VAC, 12A, 1500W Thermally Protected. It has a lifetime warranty, if anything happens to it then MAC tools will repair or replace it for free, no questions asked. Call or text: 503-705-2128 Location: HazelDellVancouverits NOT ok to contact this poster with services or other commercial interests

Vinyl scraper or whatever you can use it for. Comes with new blades I have. $2000 contact J.R. at 360 521-5449 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Practically brand new Makita circular saw. I lost the nut that holds the blade on and never got to use it. Call J.R. at 360 521-5449 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

i have a brand new \"TURBO VAC\" good to clean your car FOR $40....NEVER USED....just dont need it...if you have any questions please call OR text me at (360)213-4413...thanks Location: vancouver, waits NOT ok to contact this poster with services or other commercial interests

I have brand new Portable Roadside Kit that i dont need (its still in the box)....for $115 ....please call OR TEXT me at (360)213-4413.... thanks....INCLUDES:* Heavy duty canvas utility bag with ROLLERS and Pull-out handle*2.25 Ton SUV Jack,21\" Lifting Height With Extension*300 PSI Air Compressor*12V Impact Wrench*Flashlight*Gloves*Workmat Location: vancouver, waits NOT ok to contact this poster with services or other commercial interests

This is a new (never been used) Swift Lift Crane for a full sized Chevy truck. Will lift up to 650 lbs. It is also a functional roll bar when not in use. Electric - Hydraulic lift. Retails for 1995.00 Sale price - 2 left (dealer out of business) or best offer. Would consider trades for items of equal value or partial trade and cash. Great for lifting auto parts like engines, tranys, rear ends, etc. Can get tongs for barrels 55 gallon drums or wood rounds.Call Rick in the evenings or weekend at 360-600-9105http://www.PremiumWebsites.net Location: Vancouver, WAits NOT ok to contact this poster with services or other commercial interests

3 skillsaws retail is 169.99 I am asking $70 each. Location: vancouverits NOT ok to contact this poster with services or other commercial interests

Milwaukie hole hog in good condition works great. asking $100 Location: vancouverits NOT ok to contact this poster with services or other commercial interests

For sale a dewault right angle drill business closed our loss your gain. Works perfect! Location: vancouverits NOT ok to contact this poster with services or other commercial interests

Black&Decker 1/2\" Impact Wrench.......$135 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Black&Decker 9\" Wild Cat Grinder/Angle Sander.......$140 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Digital inductive Tack-dwell electrical analyzer. It does everything. 4,6,8,cylinder and 2 rotor engines. Very accurate. All line and book go with it. Cash or trade? rc stuff, 22 ? Location: vancouverits NOT ok to contact this poster with services or other commercial interests

Vintage or antique creeper made of oak. Old one but work like it should $20 Location: vancouverits NOT ok to contact this poster with services or other commercial interests

Delta 1/4 hp power feeder Has been used on a Plunge Routner Milling table for drawer front edge milling, has been run infrequently, very good condition. Paid $850.00 2 yrs ago. Sell for 200.00Vancouver 360.513.5290This is a stock picture, real machine isnt as shiny but in good shape. Location: VANCOUVERits NOT ok to contact this poster with services or other commercial interests

Will sell as set of 6 only. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Bought it at Harbor Freight. Works fine. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Flat base, 2\" blade. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Good user. Replacement Stanley lever cap, rest is original. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Its a user, maybe 40 years old. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

About 25 years old. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Used very little, runs well. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Pretty good shape. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Beautiful set of old Craftsman wood turning tools in original box, each measure 13\" long. These are full size tools, just shorter for hobby lathes, and with good steel. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

18\"x30\" rated 1000 lbs. $10 (shown)13\"x23 rated 600 lbs. $8 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

This old saw is in beautiful shape, ready to make some picture frames. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Bought it at Home Depot, works fine. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

Pretty old, works great. Small, clamps to a surface, coarse stone is 4\" dia. and needs to be trued. Location: Vancouverits NOT ok to contact this poster with services or other commercial interests