Wards Power Kraft 1 HP Router. Well taken care of and it works great.Jerry503-754-6343its NOT ok to contact this poster with services or other commercial interests

For sale is a Rockwell Motorized Miter Saw...good condition...runs well. All parts are in good working condition...cash only please. $40 obo...thanks! Location: Sherwoodits NOT ok to contact this poster with services or other commercial interests

carpet strecher 50.00 obo call 503 888 8790its NOT ok to contact this poster with services or other commercial interests

We have a wide variety of hydraulic fittings. You can buy them individually, or you can buy the entire cabinet. We are selling this parts at 40% below our cost.Grey Cabinet - $1115.00Shelves Under Grey Cabinet - $170.00All Other Hydraulic Parts - $1790.00Grey Cabinet & Shelves Under Grey Cabinet - $1790.00Grey Cabinet, Shelves, & All Other Hydraulic Parts - $3075.00Our Semi-Trailer repair shop is going out of business, and we are liquidating $90,000 worth of inventory. See our complete list on our website here: http://www.youngtlr.com/parts.aspAll sales are cash only. We are open Monday through Friday 7:30am to 4:00pm. Weekend and evening appointments may be available upon request. For more information call 503-668-4191 Location: Sandyits NOT ok to contact this poster with services or other commercial interests

We have a wide variety of air fittings. You can buy them individually, or you can buy the entire cabinet. We are selling these parts at 40% below our cost.Yellow Cabinet with Fittings - $750.00Grey Cabinet with Fittings - $65.00All Other Air Parts - $745.00Yellow & Grey Cabinets together - $815.00 Yellow & Grey Cabinets and All Other Air Parts = $1560.00Our Semi-Trailer repair shop is going out of business, and we are liquidating $90,000 worth of inventory. See our complete list on our website here: http://www.youngtlr.com/parts.aspAll sales are cash only. We are open Monday through Friday 7:30am to 4:00pm. Weekend and evening appointments may be available upon request. For more information call 503-668-4191 Location: Sandyits NOT ok to contact this poster with services or other commercial interests

Alkota pressure washer. 5gpm 4000psi. Hot or cold water. 16hp electric start Vanguard motor. Skid mounted washer in 12 tandem axle cargo trailer with brakes. 275 gallon water tank. Extra room at front of trailer for your other stuff. All of the equipment is in great shape and works perfect. Located in Bend, OR. Possible delivery to Portland for purchase. $6995 or your best offerLuke541 460 3582its NOT ok to contact this poster with services or other commercial interests

batterry no good 5034646000 Location: seits NOT ok to contact this poster with services or other commercial interests

lasermark 58-ilm-xt indoor/outdoor self-leveling laser cross level brand new in box I bought it about 3 mos ago and got laid off just recently never got to use it , dont have reciept so cant return it except instore credit but need the cash more right now.I dont even have a phone but i can call you back if you leave a # other wise send a email to billybear67@comcast.net and i will email you back or call you..thankyouBillThe ILMXTE is the ideal laser line layout tool for both indoor and outdoor jobs. Easy to Use operation features horizontal and vertical for both interior and exterior jobs, as well as laser cross and manual mode for interior applications. Outdoor pulsing mode can easily be used for 100 feet with the laser line detector. Accuracy is +_3/32\" at 30 feet, up to a 100 feet depending on illumination of area. Detector has a range of over a 100 feet. Out of level feature lets you know when the unit is out of level, by automatically shutting off if the unit is moved out of its +_ 4 degree self-leveling range. The extra bright diodes and angled window gives the unit a bigger range on the plumb line, with added brightness. Applications include finish carpentry, cabinets and shelving, installing closets, wall tiles, floor, wainscoting and paneling, door and window projects etc. Robust over molded housing for durability and waterproof. ILMXTE comes with line laser detector, tripod, and Hard caseRobust over-molded housing and impact resistance angle window for extended vertical plumb line and durability Working Range up to 100 Feet depending on Illumination Out-of-leveling range sensor triggers the beams to automatically shut off when the unit is moved out of its ±5° self-leveling range. Outdoor “Pulsing” Mode allows unit to be used with laser line detector. Extra bright laser diodes for extend range over 100 feet MFG Brand Name : LASERMARK MFG Model # : 58-ILM-XTE MFG Part # : 58-ILM-XTE SpecificationsADA Compliant : No Accessories Included : Yes Assembled Depth (In Inches) : 5.5 In. Assembled Height (In Inches) : 13. In. Assembled Weight (In LBS) : 7 Assembled Width (In Inches) : 10 In. Color / Finish : Yellow/Black Energy Star Compliant : No Indoor or Outdoor : Indoor/Outdoor Number of Vials Measuring Level : 0 Number of Vials Measuring Plumb : 0 Replaceable Head : No Location: camas,waits NOT ok to contact this poster with services or other commercial interests

Tool marked Phila 34 PA 048 on one side and F118. The tool has a rotating screwdriver and built in 5/8 lock wrench, 3/4 cap wrench in handle. I also have pump couplers and 300 assorted oil furnace nozzles. 360-635-2220 Jim Location: Vancouver, WAits NOT ok to contact this poster with services or other commercial interests

drill and baterry lithium ion works excellent 5034646000 Location: seits NOT ok to contact this poster with services or other commercial interests

Large blower for a blacksmith forge,big and heavyOn the side it says Buffalo forge co with #201 and on other side # 200. base is 18 w and its 49 tall.(the leg vice in pic is sold) asking $ 200.00 Location: Bartonits NOT ok to contact this poster with services or other commercial interests

Heavy duty router table with fence, dust collection, and switched outlet. Plenty of storage. Top is 36\"x36\". Location: Beavertonits NOT ok to contact this poster with services or other commercial interests

Skil Hand Sander $35- works good.- Used very little. for sale by owner Brent 971-409-5313 Location: se greshamits NOT ok to contact this poster with services or other commercial interests

. The two rechargeable batteries make this a bargain. Both batteries are working fine! Newer Drill has 2 batteries but someone walked off with the charging unit. If you have a TITAN charger this Drill will make a perfect back-up. Call 360-887-5552 Location: Ridgefieldits NOT ok to contact this poster with services or other commercial interests

Sturdy post hole digger, flat shovel-and a standard size wheelbarrow- will sell all together for $40 or $20 each if sold separately. Call 360-887-5552or email . Location: Ridgefieldits NOT ok to contact this poster with services or other commercial interests

Industrial Woodworking Machinery Co. 18\" Right Hand Pnuematic Up Cut Cut off saw. 10 H.P. Baldor 230/ 460 3 phase motor. Excellent condition. $1250. Seattle Location: seattleits NOT ok to contact this poster with services or other commercial interests

1998 Whirlwind 14\" LH Pneumatic upcut cutoff saw. Model #1000L, 5HP Baldor 230/460 Volt 3 PH motor. Access door lockout feature, and material pressure sensor switch. Includes factory sales paper work, sales reciept and owners manual. Good condition. $700 Seattle Location: Seattleits NOT ok to contact this poster with services or other commercial interests

175 o.b.o. will demonstarte that it works, needs a little tlc please call 360-696-8570 or 360-773-3447. VANGUARD 9 HP. WITH WAND AND HOSES AND ATTACHMENTS. IF YOU WANT IT COME MAKE AN OFFER, THIS WONT LAST LONG AT THIS PRICE. Location: vancouverits NOT ok to contact this poster with services or other commercial interests

Grandpas workbench has 2 wood screw vises, 8 drawers and a tool recess Dimensions are 7Lx2Dx32\"H Built to last another 100+ years $400 Art 360-904-1087 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

This a great easy to use tool. It will read codes, freeze frame data, monitor status and clear codes. Just plug it in and it automaticlly starts communicating. It is udatable and comes with instructions and a CD. It is almost brand new. I bought it a month ago for $70. I need the cash so I have to sell a few things. Location: Portlandits NOT ok to contact this poster with services or other commercial interests

Craftsman 30 gal compressor150 psi2hpoil free3 yrs oldruns excellentfirm on price Location: vancouver waits NOT ok to contact this poster with services or other commercial interests

Transmission Flush Machine. In good condition, has all the connectors. Location: Ariel, WAits NOT ok to contact this poster with services or other commercial interests

Ammco model #3850. Brake Lathe is in very good shape. Has all adapters up to one ton brakes. Comes with homemade bench and brake drum caliper. Location: Ariel, WAits NOT ok to contact this poster with services or other commercial interests

Photo GalleryDescriptionI have for sale a pressure washer and a brand new battery and ignition switch. It does need a new hose I bought this on craigslist about a month ago and lost my job so I dont have the money to finish it and need the money now. My loss is your gainFeaturesQuantity Available: 1Type: Power ToolsManufacturer: KarcherModel #: 3400psiCondition: GoodLocationOR Powered by vFlyer.comvFlyer Id: 2584379its NOT ok to contact this poster with services or other commercial interests

Good used Coats S-60 tire spreader for sale. $175 or best cash offer. Location: Winlockits NOT ok to contact this poster with services or other commercial interests

Used truck tire cage for sale - good shape! $50 or best cash offer. Thanks! Location: Winlockits NOT ok to contact this poster with services or other commercial interests

I am selling my Lincoln Mig WElder model sp-135T for $600.00 or best offer. The welder comes with a gas tank,, big spindle of wire already attached, a smaller brand new roll of wire, 2 cheaper welding masks and 1 nice welding mask and a brand new roll of aluminum wire. The welder has all of the appropriate hookups for the gas. The welder is barely used and in great shape. The gas tank is approximately 3 feet tall. If you are interested in this deal, please call David at 503-625-1479. Thanks for your inquiry. Location: SHERWOODits NOT ok to contact this poster with services or other commercial interests

..................................................................................click on Image to EnlargeA must have for any detailed bench projects. First $99.00 CASH Only takes!!! OBO Contact Lee at 360-835-3186 or 503-481-9195STANDARD 5\" MAGNILITE®Most popular 5\", 3 diopter (1.75X) magnifier leads the industry in quality and workmanship. With excellent crystal clear crown white lens provides superior light transmission and reduces long term eye fatigue associated with the competitors grade B green lenses. Enclosed in a heavy aluminum spun shade and liner, maintenance is quick and easy. Now, all these 5\" Magnilites® are available with an ultraviolet (black light) bulb for inspection of conformal coatings, plating voids and other hard to detect flaws. Five diopter (2.25X) optional. 14015 Auxiliary Lens snaps on underneath to make any 5\" Magnilite® 3 diopters more powerful. 45\" Swing arm reach. Clamp Base, wall mount or surface mount. Gray in color. Location: Vanc/PDXits NOT ok to contact this poster with services or other commercial interests

.....................................................................click on Image to Enlarge.........................then, select Full Size!!!Vintage 6 foot x 7 inch blade, complete. First $250 CASH Only or best offer takes this piece of history home.Contact Lee @ 360-835-3186 or 503-481-9195 Location: Vanc/PDXits NOT ok to contact this poster with services or other commercial interests

2] we have a new miter box ans saw $10.00 4] here we have 3 coffee cans full of assorted tools sockets, screw drivers, wrenchs ect $15 each or $30 for all three 5] here we have a nice bosch sander it works great asking $15 for it Location: kelsoits NOT ok to contact this poster with services or other commercial interests

automatic taping boxes . 1 is 6 inch, 1 is 12 inch an attachment and handle about 6 ft long 503 348 4016 Location: hubbardits NOT ok to contact this poster with services or other commercial interests

I freaking love this thing and hate to see it go. Great EDC. Has seen minimal use. Moving and cant take it with me. Retail price is $260.http://images.45glockman.com/6150v2.jpghttp://www.benchmade.com/products/product_detail.aspx?model=6150 Location: Alohaits NOT ok to contact this poster with services or other commercial interests

- Tubeless With Rubber Inflatable Tube-2.50-4-2 pr-5/8\" Axle-Only The Wheel And TireCome Take A LookTotal Of 34$5.00 For 1$15.00 For 4Or Take Them All For Only$125 OBO!Want Them Gone!E-Mail Or CallCameron (503) 869-6026 Location: Hillsboroits NOT ok to contact this poster with services or other commercial interests

Almost new. No case. Part # DW974. No battery. Location: Lake Oswegoits NOT ok to contact this poster with services or other commercial interests

This is a RALPH generator off a motor-home. If you have never looked at RV generators before you owe it to yourself They are far better made and built to last. You can go to \"Cutis Trailers\" to check some out. This is a 3500 watt unit and went for about $1800.00 new. in the late 1970s Today you have to pay over $3,000.00. This was converted to a self contained rolling cart complete with a 12volt battery, fuel tank, along with the generator and motor unit.and a push button start and on/ off switch and 2 standard 120v house type plug-ins. It was my dads and only used a 3 or 4 times when there was a power outage. the rest of the time it was started up every year and ran for 3-5 mins. Bills need to be paid so it has to go. Call Ken @ 206-567-2120 Location: orchards,wa.its NOT ok to contact this poster with services or other commercial interests

work vice for heavy duty use or bumper mount for service truck.4\" wide jaws, opens over 8\" Location: longviewits NOT ok to contact this poster with services or other commercial interests

Powerfull 12\" Dewalt cut off saw. Cuts through thick solid oak with ease, wont even slow it down.Great saw for a lumber yard or any shopRUNS ON 110 volt or 220 volt power$500.00 OBO or you may have something interesting to trade that I could use Location: VANCOUVERits NOT ok to contact this poster with services or other commercial interests

this motor works. i bought to use the tank. come get this for your project. 110volt 1.5 HP direct drive Location: longviewits NOT ok to contact this poster with services or other commercial interests

Westinghouse transformerKVA 45.03 phase/ stepdown/stepup transformer480 volt primary120/240 volt secondary Location: portlandits NOT ok to contact this poster with services or other commercial interests

ECE \"Primus\" jointer plane. This is a hand woodworking tool in excellent condition. It is 23 ¾” long and the cutting iron is 2 ½” wide. The plane was made in Germany and has a body of beech wood and a ½” thick lignum vitae sole. Location: Milwaukie, ORits NOT ok to contact this poster with services or other commercial interests

i have a welding hood and would like to get 20.00 for it . its in good shap call 503 841 9319 ask robert Location: sherwoodits NOT ok to contact this poster with services or other commercial interests

Coleman Powermaster Generator. Powerbase 5000, 10 hp, Briggs & Stratton motor, 5 gal gas tank. Model # PM0545305.01 Only started for half hour. Runs great. Call Marc 503-267-4645 Location: Oregon Cityits NOT ok to contact this poster with services or other commercial interests

Model DG-2000 ,similar to Honda EU 2000 (but this ours has more output) Engine TypeForced Air-Cooled, 1-Cylinder, 4-Stroke, OHV Displacement133cc Max. power output2.6KW/5000RPM Rated power output 3.0KW/5500RPM Ignition systemT.D.I Starting systemRecoil starting Fuel tank capacity 1.8 gal Continous operating hour7.5 and 16hours at 1/2 load Noise (7m away)65dba Generator Rated output frequency50HZ/60HZ Rated output voltage230V/120V D. C. Output12V 8.3A A.C. Output230V/120V **puts out \"SINEWAVE\" electricity, for sensitive electronics Dimensions Total length 22\" Total width 11 3/4\" Total height 19 1/2\" Net weight 60lbs Standard Features Auto voltage adjustor , Oil alert system, Curcuit breaker , Circuit protector, **this is NEW in Box at less than 1/2 the price of Other Invertor generators*** 503- 8 8 8- 5 4 2 7 or 2 5 3- 9 5 1- 1 9 4 5 also have a 1kw Location: portland/vancouverits NOT ok to contact this poster with services or other commercial interests

The Jackhammer has vibration controls for low vibration, and has a third handle for horizontal breaking. Equipped with an electric 2.3 hp motor. It retails for $1480 but we are selling this bad boy for $749.Call us at (503)785-1168 Location: Milwaukieits NOT ok to contact this poster with services or other commercial interests

Great little job site compressor. Will keep up with 2 or three guys using nail guns at the same time. $150.00 OBO or do you have somthing to trade? Location: Vanc.its NOT ok to contact this poster with services or other commercial interests

very large arborist hand sawcall 360-696-4141 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests

This is a long handled tool to dig small hole for planting plants or bulbs. You step on the foot plates to drive it into the dirt, and then pull up on the handles. Eliminates the need to bend down on your knees. Location: SE Portland-Mt Taborits NOT ok to contact this poster with services or other commercial interests

Returned a barbeque, got a store credit card. I dont really shop there and dont have any need for a $300 gift card. Want to sell for 250 obo. Email me if you have any questions. Location: Milwaukieits NOT ok to contact this poster with services or other commercial interests

Hammer drill, with patented 3-speed all-metal transmission, delivers 450 units watts out of maximum performanceCircular saw can cut 2x4s at a 45° angle in a single passReciprocating saws keyless blade clamp allows for quick blade changesXRP™ extended run-time batteries provide long run-time & battery lifeHammer drill features 1/2\" self-tightening chuckFlexible floodlight provides hands-free useIndependently certified to applicable standardsExtended Protection Plans are available for an additional charge Number of Batteries Included for Tool: 2 Description of Tools: 18V Hammerdrill/Drill/Driver; 18V Reciprocating Saw; 18V Circular Saw; 18V Floodlight Charge Time (Hours): 1.0 Battery Amp Hour (Amps): 2.4 Case Type: Case Accessories Included: Yes Drill Chuck Size: 1/2 In. Reciprocator Blade Change: Keyless UL Safety Listing: No CSA Safety Listing: No ETL Safety Listing: No Corded/Cordless: Cordless Brand New Sealed in box.. Got as a gift, I already have 2 of the 4 tools.. Price was 499 for new from store, I think it just went down to 429.00Email me your offer and any questions. Ill get back to you asap. Location: Milwaukieits NOT ok to contact this poster with services or other commercial interests

New and Never Used YardMan Lawnmower.It needs a minor service job, due to difficult startingFeatures the Automatic Wheels, Quick Stop Release, & Clippings BagPaid $269, and never bothered to get it fixed due to having another Mower.Call Alex at 360-433-1258 for an easy pick-up. Location: East Vancouver/Fishers landing areaits NOT ok to contact this poster with services or other commercial interests

Lathe is almost new I turned 50 spindles on lathe cast iron bed with wheels includes duplicator call 1360 9210678 possible part trade for small gas driven welder Location: Battle ground waits NOT ok to contact this poster with services or other commercial interests

218//1\" steel stud mounted roller balls new cost for all 218 is about $875.00 sell all for $600.00 also have 2--16\"x48\" roller ball platforms with adj legs sell for $200.00 call 1360 9210678 Possible trade for small gas driven welder Location: Battle ground waits NOT ok to contact this poster with services or other commercial interests

Older 6\" model on 36\" base with wheels call 1360 9210678 Location: Battle ground waits NOT ok to contact this poster with services or other commercial interests

I have two (2) sets of 2 ton jack stands: The orange set is a 3 position stand, from 13-17\" high. The black set is a fixed at 15\" high. Both sets made in USA. Orange set is $7 and the black set is $5. Leave contact info at travelscout@msn.com. Thanks. Location: Garden Homeits NOT ok to contact this poster with services or other commercial interests

Our pride and joy a craftsman Chainsaw 18 in bar, 3 years old, great condition, well maintained with easy adjustable bar. The power is 42cc with a black case. It also has a warranty until 2010.Feel free to ask questions. We will consider offers. Location: Troutdaleits NOT ok to contact this poster with services or other commercial interests

portable w/stand in boxused once13 amp$75.00503-830-7552 david Location: portlandits NOT ok to contact this poster with services or other commercial interests

Rollaway Cabinets,Machinests chests,Carry arounds, &Ammo boxes. Call 360-430-0529. Location: Longviewits NOT ok to contact this poster with services or other commercial interests

(1)Skill saw $12.00 each, Belt sanders $10.00 each(SOLD), (1) Sheet sander (craftsman)$10.00(SOLD), makita electric impact wrench $20.00(SOLD), jigsaws $5.00 each(SOLD), sawsall $10.00(SOLD) Call with ? 503-253-5819, thx. Location: ne portlandits NOT ok to contact this poster with services or other commercial interests

Wesco 700# capacity hydraulic hand truck. 56 vertical lift. good condition. Contractor bought for specific job and then did not need. Cash or trade for Bosch Rotohammer. Call Matt 503-232-2844 Location: n.e. portlandits NOT ok to contact this poster with services or other commercial interests

Mobile tornado, one prop one speed, blow you away. Cash, or trade for Bosch rotohammer. Call Matt, 503-232-2844 Location: n.e. Portlandits NOT ok to contact this poster with services or other commercial interests

BRAND NEW DURA-BLOCK EXTREME PERFORMANCE 007 PAINT GUN VER.1 HVLP sells for over $400 new will for $220o.b.o never used it email or call (360)508-8791 or (360)740-7726Keywords- swamper, swampers, bogger, boggers, crawler, lift, lifted, huge, samurai, civic, honda, tool, tools, toyota, suv, car, truck, chev, ford, Location: Chehalisits NOT ok to contact this poster with services or other commercial interests

E.D.A #67RPrecision Block Level8” x 8” w/case - $350Mag Bore KCD-MN1Magnetic base drillIncludes Milwaukee½” drill motor - $450TapMatic R5Tapping head #6 – ½” capacity - $300Please call 503.349.8045. Location: Wilsonville, ORits NOT ok to contact this poster with services or other commercial interests

503-421-3679 Location: Portlandits NOT ok to contact this poster with services or other commercial interests

ABB ACS 80010 HP VFD6 mo. old includes manuals Please call 503.349.8045. Location: Wilsonville, ORits NOT ok to contact this poster with services or other commercial interests

See features listed below. These are model #334. They have never been used but have been in storage and show light shelf wear. All the straps, etc are present. These retail for $166.00 plus shipping online. Must Sell so you can save! $114.00/offer. Email this posting or call 503-708-1902 or 360-574-1230. Thank youFeatures: * Forms to the contour of the leg to provide protection from the knee to the instep of the foot * Sponge pads, top and bottom inside add comfort, absorb shock * Approximately 1.5 lbs. per pair * Shin guard with attached knee guard and instep guard * All guards except the Shin Guard are attached with a web sponge rubber hingenee Shin Instep Guard PlasticGet comfortable protection from the knee to the instep of the foot with these Plastic Knee Shin Instep Guards.Manufacturer: Ellwood Safety Appliance CoList Price: $166.00 Location: Hazel Dell area, Vancouver, WAits NOT ok to contact this poster with services or other commercial interests

Craftsman Single Phase Drill Press with some drill bits Location: Beavertonits NOT ok to contact this poster with services or other commercial interests

I have a ShopCraft Model sc5110t2 10\" radial arm saw for sale. The saw works great but the table top needs to be repaired or replaced. $15.00 obo. Thanks, Steve Location: Cornelius, ORits NOT ok to contact this poster with services or other commercial interests

DINOs Navigator 3 in 1 Scope is the most unique locksmith scope in the market. It not only allows viewing and reading a wafer locks functions, but also picks the lock. It comes with 3 different sizes (6 pieces) hard depressors designed to fit into every different size wafer lock (long, short, big, small) and 1 uniquely 1.48\"\" long tube speculum designed for some hard-to-see areas and safe openings. DINOs Navigator 3 in 1 Scope is particularly effective opening AUTO LOCKS. I can onlyIf you decide to let me ship it To you then i will give you my number and we will be on the phone as i receive payments.After 5 minutes PROCESSING YOUR ORDER i will provide you with your tracking number!NOTE PAY PAL DO NOT ALLOW SCAM ARTIST TO TAKE PEOPLE MONEY THROGUH THIER SERVICE.AND WILL DIPUTE ANY MEBER STATING THAT THE NEVER RECEVED THEIR ITEM AND THEN REFUND YOU IN FULLThose is the item i currently have for sale! sale-jvh9c-1225470421@craigslist.org sale-9ebtr-1225465668@craigslist.org sale-nhw6q-1225459225@craigslist.org sale-wd7hn-1225456619@craigslist.org sale-tbntq-1225453907@craigslist.org sale-jv38v-1225449625@craigslist.org sale-e2exj-1225447073@craigslist.org sale-vnmxu-1225445579@craigslist.org sale-pf79v-1225442249@craigslist.org sale-adjgm-1225435546@craigslist.org sale-qkp7z-1225425461@craigslist.org sale-pgdrg-1225423266@craigslist.org sale-vzcrx-1225421133@craigslist.org sale-9zhhw-1225417062@craigslist.org sale-6hryh-1225412558@craigslist.org its NOT ok to contact this poster with services or other commercial interests

This is a great deal on two quality low hour machines. Everything is in excellent condition! ~10\" Table saw, left tilting, 7 rails and 4 rails, 3 HP, 220 single phase, cast iron table, Shop fox classic fence, all sealed bearings, also includes shop fox mobile base. ~8\" Jointer 1.5 HP 220 single phase, table size: 9\" X 65\", 3 Knifes and a spare set (new), shop fox mobile base. These tools would be great for a small cabinet shop or a quality woodworker. $2100 O.B.O Leave message at (360) 388-1534 Location: Chehalisits NOT ok to contact this poster with services or other commercial interests

pad printer, used for printing on uneven surfaces such as walnut shells. needs cleaning. comes with a catalog instruction manual. Very cool if you want to print on weird things. I never got around to using it & it’s just taking up space. sold as is. call Dan at 503-544-8003. $95 Location: inner se pdxits NOT ok to contact this poster with services or other commercial interests

four hydraulic cylinders available -- $250 each, obo. two are 8 inch bore, flat bottom top. two are 7 inch bore with pinion mounts. approximately two feet each. please do not email... CALL DAN at 503.544.8003. $250 each obo. Location: inner se pdxits NOT ok to contact this poster with services or other commercial interests

Sullair Rotary Screw Compressor5HP 480V 3 PhaseSound HoodDomnick-Hunter air dryerLike new condition, runs great!Sells for over $6,000.00 new, Im selling for $2,850.00 FIRMCall with any questions, Bob 503-318-9969 Location: Welchesits NOT ok to contact this poster with services or other commercial interests

NAMCO THREAD ROLLER 6 SET 7/8-14 1 SET 1-1/8-161 MYSTERY SETALL IN GOOD CONDITIONCALL TOM 503-319-7412 Location: TUALATINits NOT ok to contact this poster with services or other commercial interests

Cast iron old delta. 3/4 hp. 115 v. 8 1/2\"blade. This is a solid and heavy saw. some rust on the body, but everything runs smoothly. 25\" ripping capacity. Mitre gage, and a couple of casters built into the base. alex Location: ne pdxits NOT ok to contact this poster with services or other commercial interests

craftsman 24 piece 3/4\" drive socket set in case most sockets never used $200.00 contact scott 541-730-9145 Location: albany,orits NOT ok to contact this poster with services or other commercial interests