|
Title
|
Location
|
Compensation
|
Date/Time
|
Wards Power Kraft 1 HP Router - $10 (pic)
 |
|
|
2009-06-18 12:49AM |
|
Wards Power Kraft 1 HP Router. Well taken care of and it works great.Jerry503-754-6343its NOT ok to contact this poster with services or other commercial interests |
|
Scaffolding barely used |
|
|
2009-06-18 12:32AM |
|
We have some barely used scaffolding that we dont have room for. We finished a garage project and now need to sell. I will make someone a good deal if you take it all. How about 50% of new. You can look at the pics and see the items we bought here. http://www.scaffold-mart.com We kept it inside and oiled so its basically as new. I have 14 sets, 12 walkboards, jacks and some plank. Call me or email me and I will get you pics and directions.What do you think has become of the young and old men?What do you think has become of the women and children?They are alive and well somewhere;The smallest sprouts show there is really no death,And if ever there was it led forward life, and does not waitat the end to arrest it,And ceased the moment life appeared.its NOT ok to contact this poster with services or other commercial interests |
|
Rockwell Chop Saw - $40 (Sherwood) (pic)
|
Sherwood |
|
2009-06-18 12:01AM |
|
For sale is a Rockwell Motorized Miter Saw...good condition...runs well. All parts are in good working condition...cash only please. $40 obo...thanks! Location: Sherwoodits NOT ok to contact this poster with services or other commercial interests |
|
DeWALT Air Compressor - $950 (Tualatin) |
Tualatin |
|
2009-06-18 9:04AM |
|
125 PSI Whellbarrow Air Compressor - Brand newCommercial duty/Contractor Grade with Commercial Grade Compressor PumpSpecs:8.9 CFM delivered @ 125 PSITwin cylinder, cast iron, oil lubricated pump w/ Emglos 50 yrs of reliability5.5 HP Honda OHV GX gas engineBall valve drain allows for quick and thorough tank drainingFully-Pneumatic tire improves worksite mobilityAutomatic Idle control for reduced fuel consumptionDrive: BeltTank Size: 8 GallonMSRP $1,298Will take reasonable offerCall Dan at 503-951-7010 Location: Tualatinits NOT ok to contact this poster with services or other commercial interests |
|
New 8500 Watt Electric Generator - $2500 (Tualatin) |
Tualatin |
|
2009-06-18 9:03AM |
|
New Porter Cable Contractor-Duty GeneratorIdle Control Saves Fuel and Reduces NoiseHour Meter for Maintenance SchedulingFull Power Switch for Maximum 120 VAC Motor StartingFuel GaugeLift KitIdle Control, Auto Voltage Regulation & Low Oil AlertSPECS:Surge Watts: 8500Voltage: 120/240Engine: 9 HP Honda GX270Fuel Tank: 7 GallonsRun Time: 13.4 hours @ 50%MSRP: $3,764.95Will accept only reasonable offers for this Industrial Grade equipmentCall Dan at 503-951-7010 Location: Tualatinits NOT ok to contact this poster with services or other commercial interests |
|
New 3"x3" 180 GPM Trash Pump - $850 (Tualatin) |
Tualatin |
|
2009-06-18 9:03AM |
|
Contractor-Duty Semi Self-Priming Trash PumpCommercial Grade Honda Engine for Longer Life3\" Suction/Discharge PortsPumps up to 180 Gallons per MinuteIncludes Strainer and Hose Clamps (no hose)SPECS:Discharge Capacity: 180 GPMEngine: Honda GX160, OHVHorsepower: 5.5Total Head Lift: 88 feetWeight: 46 lbs.MSRP: $1,280Will accept reasonable offers only for this Commercial Grade equipmentCall Dan at 503-951-7010 Location: Tualatinits NOT ok to contact this poster with services or other commercial interests |
|
capet strecher (pic)
|
|
|
2009-06-18 8:51AM |
|
carpet strecher 50.00 obo call 503 888 8790its NOT ok to contact this poster with services or other commercial interests |
|
Storm Vulcan Head & Block Surfacer - $1500 (Lafayette) |
Lafayette |
|
2009-06-18 8:50AM |
|
Storm Vulcan Head & Block Surfacer 1500 obo3 phaseCall Jennifer at 503-560-1600 leave message or email Location: Lafayetteits NOT ok to contact this poster with services or other commercial interests |
|
Misc. Hydraulic Fittings (Sandy) (pic)
|
Sandy |
|
2009-06-18 8:50AM |
|
We have a wide variety of hydraulic fittings. You can buy them individually, or you can buy the entire cabinet. We are selling this parts at 40% below our cost.Grey Cabinet - $1115.00Shelves Under Grey Cabinet - $170.00All Other Hydraulic Parts - $1790.00Grey Cabinet & Shelves Under Grey Cabinet - $1790.00Grey Cabinet, Shelves, & All Other Hydraulic Parts - $3075.00Our Semi-Trailer repair shop is going out of business, and we are liquidating $90,000 worth of inventory. See our complete list on our website here: http://www.youngtlr.com/parts.aspAll sales are cash only. We are open Monday through Friday 7:30am to 4:00pm. Weekend and evening appointments may be available upon request. For more information call 503-668-4191 Location: Sandyits NOT ok to contact this poster with services or other commercial interests |
|
Axe Pressure Washing Cabinet - $600 (Lafayette) |
Lafayette |
|
2009-06-18 8:50AM |
|
Axe Pressure Washing Cabinet 3 phase Model # SW-40 23 Volts 18 Amps Call Jennifer and leave message or email503-560-1600 Location: Lafayetteits NOT ok to contact this poster with services or other commercial interests |
|
Misc. Air Fittings (Sandy) (pic)
|
Sandy |
|
2009-06-18 8:49AM |
|
We have a wide variety of air fittings. You can buy them individually, or you can buy the entire cabinet. We are selling these parts at 40% below our cost.Yellow Cabinet with Fittings - $750.00Grey Cabinet with Fittings - $65.00All Other Air Parts - $745.00Yellow & Grey Cabinets together - $815.00 Yellow & Grey Cabinets and All Other Air Parts = $1560.00Our Semi-Trailer repair shop is going out of business, and we are liquidating $90,000 worth of inventory. See our complete list on our website here: http://www.youngtlr.com/parts.aspAll sales are cash only. We are open Monday through Friday 7:30am to 4:00pm. Weekend and evening appointments may be available upon request. For more information call 503-668-4191 Location: Sandyits NOT ok to contact this poster with services or other commercial interests |
|
Mobile Power Washer with Trailer (pic)
|
|
|
2009-06-18 8:47AM |
|
Alkota pressure washer. 5gpm 4000psi. Hot or cold water. 16hp electric start Vanguard motor. Skid mounted washer in 12 tandem axle cargo trailer with brakes. 275 gallon water tank. Extra room at front of trailer for your other stuff. All of the equipment is in great shape and works perfect. Located in Bend, OR. Possible delivery to Portland for purchase. $6995 or your best offerLuke541 460 3582its NOT ok to contact this poster with services or other commercial interests |
|
18v milwaukee drill/hammer/charger - $50 (se) (pic)
|
se |
|
2009-06-18 8:39AM |
|
batterry no good 5034646000 Location: seits NOT ok to contact this poster with services or other commercial interests |
|
lasermark indoor/outdoor laser - $200 (camas,wa) (pic)
|
camas,wa |
|
2009-06-18 8:38AM |
|
lasermark 58-ilm-xt indoor/outdoor self-leveling laser cross level brand new in box I bought it about 3 mos ago and got laid off just recently never got to use it , dont have reciept so cant return it except instore credit but need the cash more right now.I dont even have a phone but i can call you back if you leave a # other wise send a email to billybear67@comcast.net and i will email you back or call you..thankyouBillThe ILMXTE is the ideal laser line layout tool for both indoor and outdoor jobs. Easy to Use operation features horizontal and vertical for both interior and exterior jobs, as well as laser cross and manual mode for interior applications. Outdoor pulsing mode can easily be used for 100 feet with the laser line detector. Accuracy is +_3/32\" at 30 feet, up to a 100 feet depending on illumination of area. Detector has a range of over a 100 feet. Out of level feature lets you know when the unit is out of level, by automatically shutting off if the unit is moved out of its +_ 4 degree self-leveling range. The extra bright diodes and angled window gives the unit a bigger range on the plumb line, with added brightness. Applications include finish carpentry, cabinets and shelving, installing closets, wall tiles, floor, wainscoting and paneling, door and window projects etc. Robust over molded housing for durability and waterproof. ILMXTE comes with line laser detector, tripod, and Hard caseRobust over-molded housing and impact resistance angle window for extended vertical plumb line and durability Working Range up to 100 Feet depending on Illumination Out-of-leveling range sensor triggers the beams to automatically shut off when the unit is moved out of its ±5° self-leveling range. Outdoor “Pulsing” Mode allows unit to be used with laser line detector. Extra bright laser diodes for extend range over 100 feet MFG Brand Name : LASERMARK MFG Model # : 58-ILM-XTE MFG Part # : 58-ILM-XTE SpecificationsADA Compliant : No Accessories Included : Yes Assembled Depth (In Inches) : 5.5 In. Assembled Height (In Inches) : 13. In. Assembled Weight (In LBS) : 7 Assembled Width (In Inches) : 10 In. Color / Finish : Yellow/Black Energy Star Compliant : No Indoor or Outdoor : Indoor/Outdoor Number of Vials Measuring Level : 0 Number of Vials Measuring Plumb : 0 Replaceable Head : No Location: camas,waits NOT ok to contact this poster with services or other commercial interests |
|
Regulator adjustment tool - $125 (Vancouver, WA) (pic)
|
Vancouver, WA |
|
2009-06-18 8:25AM |
|
Tool marked Phila 34 PA 048 on one side and F118. The tool has a rotating screwdriver and built in 5/8 lock wrench, 3/4 cap wrench in handle. I also have pump couplers and 300 assorted oil furnace nozzles. 360-635-2220 Jim Location: Vancouver, WAits NOT ok to contact this poster with services or other commercial interests |
|
makita 18v impact drill/charger - $100 (se) (pic)
|
se |
|
2009-06-18 8:11AM |
|
drill and baterry lithium ion works excellent 5034646000 Location: seits NOT ok to contact this poster with services or other commercial interests |
|
Blacksmith forge blower - $200 (Barton) (pic)
|
Barton |
|
2009-06-18 8:05AM |
|
Large blower for a blacksmith forge,big and heavyOn the side it says Buffalo forge co with #201 and on other side # 200. base is 18 w and its 49 tall.(the leg vice in pic is sold) asking $ 200.00 Location: Bartonits NOT ok to contact this poster with services or other commercial interests |
|
Heavy Duty Router Table - $125 (Beaverton) (pic)
|
Beaverton |
|
2009-06-18 7:59AM |
|
Heavy duty router table with fence, dust collection, and switched outlet. Plenty of storage. Top is 36\"x36\". Location: Beavertonits NOT ok to contact this poster with services or other commercial interests |
|
Skil Hand Sander - $35 (se gresham) (pic)
|
se gresham |
|
2009-06-18 7:59AM |
|
Skil Hand Sander $35- works good.- Used very little. for sale by owner Brent 971-409-5313 Location: se greshamits NOT ok to contact this poster with services or other commercial interests |
|
HUSQVARNA 346XP NEW!! - $450 (Hillsboro) |
Hillsboro |
|
2009-06-18 7:58AM |
|
2009 Husqvarna 346xp Chainsaw. This is a REAL chainsaw! If you want the best, Here it is. 20\" bar, 3/8 chain, 50cc engine, Full warranty, Less than 1 hour use. This is a FAIR price! Please no lowballers!If you want more information just google 346xp and you will see that this is a good saw at a good deal.Cash only!Adam 503-998-5034 Location: Hillsboroits NOT ok to contact this poster with services or other commercial interests |
|
Circular Saw " very nice " - $45 (se gresham) |
se gresham |
|
2009-06-18 7:57AM |
|
Circular Saw $45- Works excellent. - In like new condition.- Used very little.- 10 amps.- 3 blades._ also comes with case. For sale by owner Brent 971-409-5313 cost new $60 and the 2 extra blades cost new $29.99 Location: se greshamits NOT ok to contact this poster with services or other commercial interests |
|
DRILL-/W 2 BATTERIES - $20 (Ridgefield) (pic)
|
Ridgefield |
|
2009-06-18 7:50AM |
|
. The two rechargeable batteries make this a bargain. Both batteries are working fine! Newer Drill has 2 batteries but someone walked off with the charging unit. If you have a TITAN charger this Drill will make a perfect back-up. Call 360-887-5552 Location: Ridgefieldits NOT ok to contact this poster with services or other commercial interests |
|
POSTHOLE DIGGER/FLAT SHOVEL & WHEELBARROW - $40 (Ridgefield) (pic)
|
Ridgefield |
|
2009-06-18 7:50AM |
|
Sturdy post hole digger, flat shovel-and a standard size wheelbarrow- will sell all together for $40 or $20 each if sold separately. Call 360-887-5552or email . Location: Ridgefieldits NOT ok to contact this poster with services or other commercial interests |
|
Paint Gun & Cups ( New) - $100 (Forest Grove) |
Forest Grove |
|
2009-06-18 7:47AM |
|
The Air Gun is a BINKS MODEL 118A-Air-Assisted airless spray gun-up to 1000 pounds per square inch. This Air gun is in its original box w/instructions. There are 2 cups. The first is a HI-VOLUME 2QT. PRESSURE OUTFIT (not binks). specs: AIR PRESSURE............................30-50 PSI AIR CONSUMPTION..................10. 1-14.8 CFM AIR INLET.....................................1/4 NPS (M) FLUIDINLET..................................3/8\" NPS (M) CUP CAPACITY............................2 QT. NET WEIGHT.................................7 LBS. The second is a BINKS 1 QT. SIPHON CUP AND ATTACHMENTS 3/8 NPS THREAD SWIVEL NUT MODEL 81-350 \"DRIP PROOF\" . Plus two 3 foot hoses in great condition. $130.00 OBO Call Josh @ 503.268.9644 Thanks Location: Forest Groveits NOT ok to contact this poster with services or other commercial interests |
|
18" INDUSTRIAL RH PNUEMATIC UP-CUT CUTOFF SAW - $1250 (seattle) (pic)
|
seattle |
|
2009-06-18 7:33AM |
|
Industrial Woodworking Machinery Co. 18\" Right Hand Pnuematic Up Cut Cut off saw. 10 H.P. Baldor 230/ 460 3 phase motor. Excellent condition. $1250. Seattle Location: seattleits NOT ok to contact this poster with services or other commercial interests |
|
1998 WHIRLWIND 14" LH PNEUMATIC UPCUT CUTOFF SAW - $700 (Seattle) (pic)
|
Seattle |
|
2009-06-18 7:30AM |
|
1998 Whirlwind 14\" LH Pneumatic upcut cutoff saw. Model #1000L, 5HP Baldor 230/460 Volt 3 PH motor. Access door lockout feature, and material pressure sensor switch. Includes factory sales paper work, sales reciept and owners manual. Good condition. $700 Seattle Location: Seattleits NOT ok to contact this poster with services or other commercial interests |
|
pressure washer reduced for quick sale!!!!$$$$$$******** - $175 (vancouver) (pic)
|
vancouver |
|
2009-06-18 7:22AM |
|
175 o.b.o. will demonstarte that it works, needs a little tlc please call 360-696-8570 or 360-773-3447. VANGUARD 9 HP. WITH WAND AND HOSES AND ATTACHMENTS. IF YOU WANT IT COME MAKE AN OFFER, THIS WONT LAST LONG AT THIS PRICE. Location: vancouverits NOT ok to contact this poster with services or other commercial interests |
|
workbench - $400 (Vancouver) (pic)
|
Vancouver |
|
2009-06-18 7:18AM |
|
Grandpas workbench has 2 wood screw vises, 8 drawers and a tool recess Dimensions are 7Lx2Dx32\"H Built to last another 100+ years $400 Art 360-904-1087 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests |
|
Vhehicle OBD II Code reader - $40 (Portland) (pic)
|
Portland |
|
2009-06-18 7:00AM |
|
This a great easy to use tool. It will read codes, freeze frame data, monitor status and clear codes. Just plug it in and it automaticlly starts communicating. It is udatable and comes with instructions and a CD. It is almost brand new. I bought it a month ago for $70. I need the cash so I have to sell a few things. Location: Portlandits NOT ok to contact this poster with services or other commercial interests |
|
craftsman air compressor 120v 30gal - $160 (vancouver wa) (pic)
|
vancouver wa |
|
2009-06-18 6:46AM |
|
Craftsman 30 gal compressor150 psi2hpoil free3 yrs oldruns excellentfirm on price Location: vancouver waits NOT ok to contact this poster with services or other commercial interests |
|
***TRANSMISSION FLUSH MACHINE*** - $2000 (Ariel, WA) (pic)
|
Ariel, WA |
|
2009-06-18 6:23AM |
|
Transmission Flush Machine. In good condition, has all the connectors. Location: Ariel, WAits NOT ok to contact this poster with services or other commercial interests |
|
***BRAKE LATHE*** - $2700 (Ariel, WA) (pic)
|
Ariel, WA |
|
2009-06-18 6:23AM |
|
Ammco model #3850. Brake Lathe is in very good shape. Has all adapters up to one ton brakes. Comes with homemade bench and brake drum caliper. Location: Ariel, WAits NOT ok to contact this poster with services or other commercial interests |
|
Dump Trailer 14,000 lb. 14'X6'X4' PJ Trailer 3 years old - $5800 (Oregon City) |
Oregon City |
|
2009-06-18 6:22AM |
|
I bought this 14 X 6.5 X 4 foot high dump trailer for hauling brass and copper metal just before the recycling metal business took a 75% drop in price.It is 3 years old, is rated for 14,000 lb tandem axle and little too big for my Toyota to haul. Great for a roofing company,landscape, hauler, ect... Priced to sell at 5,800.00 In O.C. by the college, sorry no pic.503-810-8626 Location: Oregon Cityits NOT ok to contact this poster with services or other commercial interests |
|
BRAND NEW MAX 23G MICRO PINNER - $199 (NE PORTLAND) |
NE PORTLAND |
|
2009-06-18 6:17AM |
|
Garage Sale Of Tools. Must See To Believe!!!Thursday June 18, 8AM-3PM...NE 122nd Ave and NE Airport Way behind the Jack in the Box. 8\" 2HP Long Bed Jointer $700.00, 14\" 1HP Bandsaw with rip fence and roller guides BRAND NEW $450.00!!!!!CLAMPS, FORSTNER BITS, DRILLS, RECIP SAWS, CORDLESS KITS, AND MUCH MORE!!!!! Location: NE PORTLANDits NOT ok to contact this poster with services or other commercial interests |
|
**********PRESSURE WASHER********** (pic)
|
|
|
2009-06-18 6:07AM |
|
Photo GalleryDescriptionI have for sale a pressure washer and a brand new battery and ignition switch. It does need a new hose I bought this on craigslist about a month ago and lost my job so I dont have the money to finish it and need the money now. My loss is your gainFeaturesQuantity Available: 1Type: Power ToolsManufacturer: KarcherModel #: 3400psiCondition: GoodLocationOR Powered by vFlyer.comvFlyer Id: 2584379its NOT ok to contact this poster with services or other commercial interests |
|
Coats S-60 Tire Spreader - $175 (Winlock) (pic)
|
Winlock |
|
2009-06-18 5:50AM |
|
Good used Coats S-60 tire spreader for sale. $175 or best cash offer. Location: Winlockits NOT ok to contact this poster with services or other commercial interests |
|
Dewalt Right Angle Drill - $175 (Beaverton) |
Beaverton |
|
2009-06-18 5:48AM |
|
Dewalt Right Angle Drill (Hole Hog)Heavy Duty and like new conditioncome with 5 bits and extentionsasking 175.00Unemployed and needing to liquidate toolsmy loss, your gainCall Mike 503-930-8135 Location: Beavertonits NOT ok to contact this poster with services or other commercial interests |
|
Tire Cage - $50 (Winlock) (pic)
|
Winlock |
|
2009-06-18 5:47AM |
|
Used truck tire cage for sale - good shape! $50 or best cash offer. Thanks! Location: Winlockits NOT ok to contact this poster with services or other commercial interests |
|
Homelite Generator - $425 (Beaverton) |
Beaverton |
|
2009-06-18 5:44AM |
|
Homelite LRX56005.6 KW High Performance series with only 535 hoursTank holds 8 plus hours of fuelexcellent condition, lightly used for home, never commercially usedAsking 425.00Unemployed and needing to liquidate toolsmy loss, your gainCall Mike 503-930-8135 Location: Beavertonits NOT ok to contact this poster with services or other commercial interests |
|
Dewalt Rotary laser level - $250 (Beaverton) |
Beaverton |
|
2009-06-18 5:41AM |
|
Dewalt Rotary laser level18 VDC in case with alot of extrasExcellent condition, light usageUnemployed and needing to liquidate toolsmy loss, your gainCall Mike 503-930-8135 Location: Beavertonits NOT ok to contact this poster with services or other commercial interests |
|
Dewalt Biscuit Jointer - $125 (Beaverton) |
Beaverton |
|
2009-06-18 5:38AM |
|
Dewalt Biscuit JointerExcellent ConditionVery little useasking 125.00 or best offerUnemployed and needing to liquidate toolsmy loss, your gainCall Mike 503-930-8135 Location: Beavertonits NOT ok to contact this poster with services or other commercial interests |
|
Ridgid Pipe Threader & Vice - $125 (Beaverton) |
Beaverton |
|
2009-06-18 5:36AM |
|
Ridgid Pipe Threader and ViceGreat condition Very little useComes with 3/8 to 1 1/4 inch NPT BitsAsking 125 for all or best offerUnemployed and needing to liquidate toolsmy loss, your gainCall Mike 503-930-8135 Location: Beavertonits NOT ok to contact this poster with services or other commercial interests |
|
Masterset (Ramset) .27 Cal Gun - $175 (Beaverton) |
Beaverton |
|
2009-06-18 5:33AM |
|
Masterset (Ramset) .27 Cal Gunincluded is thousands and thousands of charges and fastenersLightly used.. Very good conditionasking 175 or best offerCall Mike 503-930-8135 Location: Beavertonits NOT ok to contact this poster with services or other commercial interests |
|
LINCOLN WELDER sp-135T - $600 (SHERWOOD) (pic)
|
SHERWOOD |
|
2009-06-18 2:54AM |
|
I am selling my Lincoln Mig WElder model sp-135T for $600.00 or best offer. The welder comes with a gas tank,, big spindle of wire already attached, a smaller brand new roll of wire, 2 cheaper welding masks and 1 nice welding mask and a brand new roll of aluminum wire. The welder has all of the appropriate hookups for the gas. The welder is barely used and in great shape. The gas tank is approximately 3 feet tall. If you are interested in this deal, please call David at 503-625-1479. Thanks for your inquiry. Location: SHERWOODits NOT ok to contact this poster with services or other commercial interests |
|
((((((((((((((((((((((( Magnifier Light )))))))))))))))))))))))))))))) - $99 (Vanc/PDX) (pic)
|
Vanc/PDX |
|
2009-06-18 2:17AM |
|
..................................................................................click on Image to EnlargeA must have for any detailed bench projects. First $99.00 CASH Only takes!!! OBO Contact Lee at 360-835-3186 or 503-481-9195STANDARD 5\" MAGNILITE®Most popular 5\", 3 diopter (1.75X) magnifier leads the industry in quality and workmanship. With excellent crystal clear crown white lens provides superior light transmission and reduces long term eye fatigue associated with the competitors grade B green lenses. Enclosed in a heavy aluminum spun shade and liner, maintenance is quick and easy. Now, all these 5\" Magnilites® are available with an ultraviolet (black light) bulb for inspection of conformal coatings, plating voids and other hard to detect flaws. Five diopter (2.25X) optional. 14015 Auxiliary Lens snaps on underneath to make any 5\" Magnilite® 3 diopters more powerful. 45\" Swing arm reach. Clamp Base, wall mount or surface mount. Gray in color. Location: Vanc/PDXits NOT ok to contact this poster with services or other commercial interests |
|
((((((((((((((((((((((((((((( Antique Misery Whip )))))))))))))))))))) - $250 (Vanc/PDX) (pic)
|
Vanc/PDX |
|
2009-06-18 2:08AM |
|
.....................................................................click on Image to Enlarge.........................then, select Full Size!!!Vintage 6 foot x 7 inch blade, complete. First $250 CASH Only or best offer takes this piece of history home.Contact Lee @ 360-835-3186 or 503-481-9195 Location: Vanc/PDXits NOT ok to contact this poster with services or other commercial interests |
|
tools for sale (kelso) (pic)
|
kelso |
|
2009-06-18 2:00AM |
|
2] we have a new miter box ans saw $10.00 4] here we have 3 coffee cans full of assorted tools sockets, screw drivers, wrenchs ect $15 each or $30 for all three 5] here we have a nice bosch sander it works great asking $15 for it Location: kelsoits NOT ok to contact this poster with services or other commercial interests |
|
Taping boxes set of 3 + handle - $100 (hubbard) (pic)
|
hubbard |
|
2009-06-18 1:51AM |
|
automatic taping boxes . 1 is 6 inch, 1 is 12 inch an attachment and handle about 6 ft long 503 348 4016 Location: hubbardits NOT ok to contact this poster with services or other commercial interests |
|
Benchmade 6150 Mini-Rukus Auto - $175 (Aloha) (pic)
|
Aloha |
|
2009-06-18 1:50AM |
|
I freaking love this thing and hate to see it go. Great EDC. Has seen minimal use. Moving and cant take it with me. Retail price is $260.http://images.45glockman.com/6150v2.jpghttp://www.benchmade.com/products/product_detail.aspx?model=6150 Location: Alohaits NOT ok to contact this poster with services or other commercial interests |
|
Pneumatic Casters - $5 (Hillsboro) (pic)
|
Hillsboro |
|
2009-06-18 1:00AM |
|
- Tubeless With Rubber Inflatable Tube-2.50-4-2 pr-5/8\" Axle-Only The Wheel And TireCome Take A LookTotal Of 34$5.00 For 1$15.00 For 4Or Take Them All For Only$125 OBO!Want Them Gone!E-Mail Or CallCameron (503) 869-6026 Location: Hillsboroits NOT ok to contact this poster with services or other commercial interests |
|
3/8" Dewalt 12v - $35 (Lake Oswego) (pic)
|
Lake Oswego |
|
2009-06-17 12:46PM |
|
Almost new. No case. Part # DW974. No battery. Location: Lake Oswegoits NOT ok to contact this poster with services or other commercial interests |
|
Generator on custom cart ,push button start, cool package - $385 (orchards,wa.) (pic)
|
orchards,wa. |
|
2009-06-17 12:42PM |
|
This is a RALPH generator off a motor-home. If you have never looked at RV generators before you owe it to yourself They are far better made and built to last. You can go to \"Cutis Trailers\" to check some out. This is a 3500 watt unit and went for about $1800.00 new. in the late 1970s Today you have to pay over $3,000.00. This was converted to a self contained rolling cart complete with a 12volt battery, fuel tank, along with the generator and motor unit.and a push button start and on/ off switch and 2 standard 120v house type plug-ins. It was my dads and only used a 3 or 4 times when there was a power outage. the rest of the time it was started up every year and ran for 3-5 mins. Bills need to be paid so it has to go. Call Ken @ 206-567-2120 Location: orchards,wa.its NOT ok to contact this poster with services or other commercial interests |
|
still need large old lathe at lease 18 inch swing. (Longview) |
Longview |
|
2009-06-17 12:41PM |
|
STILL NEED A LARGE LATHE ONLY HAVE TWO PROJECTS TO DO. Ed 360-423-6598 have cash just no games please. can pick up if under 3500 pounds. Heavier need a day or two to pick up. Location: Longviewits NOT ok to contact this poster with services or other commercial interests |
|
25 gallon sparyer for quad or small lawn tractor - $200 (estacada) |
estacada |
|
2009-06-17 12:36PM |
|
12 volt system 25 gallons 8 ft spray bar Location: estacadaits NOT ok to contact this poster with services or other commercial interests |
|
47 kw generator - $8000 (estacada) |
estacada |
|
2009-06-17 12:35PM |
|
110 220 440 3 phase need to power the whole nieghborhood this is it Location: estacadaits NOT ok to contact this poster with services or other commercial interests |
|
Gas Powered Air Compressor - $300 (SE) |
SE |
|
2009-06-17 12:28PM |
|
Air America, 10 CFM@ 90 PSI, runs good, needs carb work, pumps air good, 20 gallon tank.Call David at 503-501-7396300.00 obo Location: SEits NOT ok to contact this poster with services or other commercial interests |
|
Leatherman Juice CS4 - $25 (NE) |
NE |
|
2009-06-17 12:26PM |
|
For sale blue25.00cash only Location: NEits NOT ok to contact this poster with services or other commercial interests |
|
heavy duty reed vice - $50 (longview) (pic)
|
longview |
|
2009-06-17 12:24PM |
|
work vice for heavy duty use or bumper mount for service truck.4\" wide jaws, opens over 8\" Location: longviewits NOT ok to contact this poster with services or other commercial interests |
|
12" RADIAL ARM SAW commercial grade (VANCOUVER) (pic)
|
VANCOUVER |
|
2009-06-17 12:18PM |
|
Powerfull 12\" Dewalt cut off saw. Cuts through thick solid oak with ease, wont even slow it down.Great saw for a lumber yard or any shopRUNS ON 110 volt or 220 volt power$500.00 OBO or you may have something interesting to trade that I could use Location: VANCOUVERits NOT ok to contact this poster with services or other commercial interests |
|
craftsman compressor motor - $20 (longview) (pic)
|
longview |
|
2009-06-17 12:17PM |
|
this motor works. i bought to use the tank. come get this for your project. 110volt 1.5 HP direct drive Location: longviewits NOT ok to contact this poster with services or other commercial interests |
|
Transformer - $850 (portland) (pic)
|
portland |
|
2009-06-17 12:12PM |
|
Westinghouse transformerKVA 45.03 phase/ stepdown/stepup transformer480 volt primary120/240 volt secondary Location: portlandits NOT ok to contact this poster with services or other commercial interests |
|
ECE wooden jointer place - $100 (Milwaukie, OR) (pic)
|
Milwaukie, OR |
|
2009-06-17 12:08PM |
|
ECE \"Primus\" jointer plane. This is a hand woodworking tool in excellent condition. It is 23 ¾” long and the cutting iron is 2 ½” wide. The plane was made in Germany and has a body of beech wood and a ½” thick lignum vitae sole. Location: Milwaukie, ORits NOT ok to contact this poster with services or other commercial interests |
|
welding hood - $20 (sherwood) (pic)
|
sherwood |
|
2009-06-17 12:06PM |
|
i have a welding hood and would like to get 20.00 for it . its in good shap call 503 841 9319 ask robert Location: sherwoodits NOT ok to contact this poster with services or other commercial interests |
|
Coleman 5000 Generat0r - $375 (Oregon City) (pic)
|
Oregon City |
|
2009-06-17 12:04PM |
|
Coleman Powermaster Generator. Powerbase 5000, 10 hp, Briggs & Stratton motor, 5 gal gas tank. Model # PM0545305.01 Only started for half hour. Runs great. Call Marc 503-267-4645 Location: Oregon Cityits NOT ok to contact this poster with services or other commercial interests |
|
Super Silent Inverter 3kw Generator,NEW!! - $800 (portland/vancouver) (pic)
|
portland/vancouver |
|
2009-06-17 12:04PM |
|
Model DG-2000 ,similar to Honda EU 2000 (but this ours has more output) Engine TypeForced Air-Cooled, 1-Cylinder, 4-Stroke, OHV Displacement133cc Max. power output2.6KW/5000RPM Rated power output 3.0KW/5500RPM Ignition systemT.D.I Starting systemRecoil starting Fuel tank capacity 1.8 gal Continous operating hour7.5 and 16hours at 1/2 load Noise (7m away)65dba Generator Rated output frequency50HZ/60HZ Rated output voltage230V/120V D. C. Output12V 8.3A A.C. Output230V/120V **puts out \"SINEWAVE\" electricity, for sensitive electronics Dimensions Total length 22\" Total width 11 3/4\" Total height 19 1/2\" Net weight 60lbs Standard Features Auto voltage adjustor , Oil alert system, Curcuit breaker , Circuit protector, **this is NEW in Box at less than 1/2 the price of Other Invertor generators*** 503- 8 8 8- 5 4 2 7 or 2 5 3- 9 5 1- 1 9 4 5 also have a 1kw Location: portland/vancouverits NOT ok to contact this poster with services or other commercial interests |
|
Wacker Jackhammer - $749 (Milwaukie) (pic)
|
Milwaukie |
|
2009-06-17 12:01PM |
|
The Jackhammer has vibration controls for low vibration, and has a third handle for horizontal breaking. Equipped with an electric 2.3 hp motor. It retails for $1480 but we are selling this bad boy for $749.Call us at (503)785-1168 Location: Milwaukieits NOT ok to contact this poster with services or other commercial interests |
|
EMGLOW AIRMATE Compressor - $150 (Vanc.) (pic)
|
Vanc. |
|
2009-06-17 12:00PM |
|
Great little job site compressor. Will keep up with 2 or three guys using nail guns at the same time. $150.00 OBO or do you have somthing to trade? Location: Vanc.its NOT ok to contact this poster with services or other commercial interests |
|
Arborist (large) hand saw - $40 (Vancouver) (pic)
|
Vancouver |
|
2009-06-17 8:01PM |
|
very large arborist hand sawcall 360-696-4141 Location: Vancouverits NOT ok to contact this poster with services or other commercial interests |
|
Battery Charger - $10 (Milwaukie) |
Milwaukie |
|
2009-06-17 7:56PM |
|
Car Battery Charger $10 call 503-268-3347 or reply to this posting Location: Milwaukieits NOT ok to contact this poster with services or other commercial interests |
|
Bulb Planter - $5 (SE Portland-Mt Tabor) (pic)
|
SE Portland-Mt Tabor |
|
2009-06-17 7:56PM |
|
This is a long handled tool to dig small hole for planting plants or bulbs. You step on the foot plates to drive it into the dirt, and then pull up on the handles. Eliminates the need to bend down on your knees. Location: SE Portland-Mt Taborits NOT ok to contact this poster with services or other commercial interests |
|
Home Depot $300 Store Credit - $250 (Milwaukie) (pic)
|
Milwaukie |
|
2009-06-17 7:34PM |
|
Returned a barbeque, got a store credit card. I dont really shop there and dont have any need for a $300 gift card. Want to sell for 250 obo. Email me if you have any questions. Location: Milwaukieits NOT ok to contact this poster with services or other commercial interests |
|
Dewalt XRP 4 tool Cordless Combo kit - $375 (Milwaukie) (pic)
|
Milwaukie |
|
2009-06-17 7:33PM |
|
Hammer drill, with patented 3-speed all-metal transmission, delivers 450 units watts out of maximum performanceCircular saw can cut 2x4s at a 45° angle in a single passReciprocating saws keyless blade clamp allows for quick blade changesXRP™ extended run-time batteries provide long run-time & battery lifeHammer drill features 1/2\" self-tightening chuckFlexible floodlight provides hands-free useIndependently certified to applicable standardsExtended Protection Plans are available for an additional charge Number of Batteries Included for Tool: 2 Description of Tools: 18V Hammerdrill/Drill/Driver; 18V Reciprocating Saw; 18V Circular Saw; 18V Floodlight Charge Time (Hours): 1.0 Battery Amp Hour (Amps): 2.4 Case Type: Case Accessories Included: Yes Drill Chuck Size: 1/2 In. Reciprocator Blade Change: Keyless UL Safety Listing: No CSA Safety Listing: No ETL Safety Listing: No Corded/Cordless: Cordless Brand New Sealed in box.. Got as a gift, I already have 2 of the 4 tools.. Price was 499 for new from store, I think it just went down to 429.00Email me your offer and any questions. Ill get back to you asap. Location: Milwaukieits NOT ok to contact this poster with services or other commercial interests |
|
New Lawnmower - $100 (East Vancouver/Fishers landing area) (pic)
|
East Vancouver/Fishers landing area |
|
2009-06-17 7:25PM |
|
New and Never Used YardMan Lawnmower.It needs a minor service job, due to difficult startingFeatures the Automatic Wheels, Quick Stop Release, & Clippings BagPaid $269, and never bothered to get it fixed due to having another Mower.Call Alex at 360-433-1258 for an easy pick-up. Location: East Vancouver/Fishers landing areaits NOT ok to contact this poster with services or other commercial interests |
|
Delta 1440 wood lathe - $1450 (Battle ground wa) (pic)
|
Battle ground wa |
|
2009-06-17 7:23PM |
|
Lathe is almost new I turned 50 spindles on lathe cast iron bed with wheels includes duplicator call 1360 9210678 possible part trade for small gas driven welder Location: Battle ground waits NOT ok to contact this poster with services or other commercial interests |
|
1" platform roller balls - $600 (Battle ground wa) (pic)
|
Battle ground wa |
|
2009-06-17 7:22PM |
|
218//1\" steel stud mounted roller balls new cost for all 218 is about $875.00 sell all for $600.00 also have 2--16\"x48\" roller ball platforms with adj legs sell for $200.00 call 1360 9210678 Possible trade for small gas driven welder Location: Battle ground waits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman jointer - $150 (Battle ground wa) (pic)
|
Battle ground wa |
|
2009-06-17 7:22PM |
|
Older 6\" model on 36\" base with wheels call 1360 9210678 Location: Battle ground waits NOT ok to contact this poster with services or other commercial interests |
|
Jack Stands, 2 ton - $7 (Garden Home) (pic)
|
Garden Home |
|
2009-06-17 7:12PM |
|
I have two (2) sets of 2 ton jack stands: The orange set is a 3 position stand, from 13-17\" high. The black set is a fixed at 15\" high. Both sets made in USA. Orange set is $7 and the black set is $5. Leave contact info at travelscout@msn.com. Thanks. Location: Garden Homeits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman Chainsaw - $160 (Troutdale) (pic)
|
Troutdale |
|
2009-06-17 7:11PM |
|
Our pride and joy a craftsman Chainsaw 18 in bar, 3 years old, great condition, well maintained with easy adjustable bar. The power is 42cc with a black case. It also has a warranty until 2010.Feel free to ask questions. We will consider offers. Location: Troutdaleits NOT ok to contact this poster with services or other commercial interests |
|
Ryobi table saw - $75 (portland) (pic)
|
portland |
|
2009-06-17 7:06PM |
|
portable w/stand in boxused once13 amp$75.00503-830-7552 david Location: portlandits NOT ok to contact this poster with services or other commercial interests |
|
Fathers Day Toolboxes - $20100 (Longview) (pic)
|
Longview |
|
2009-06-17 7:03PM |
|
Rollaway Cabinets,Machinests chests,Carry arounds, &Ammo boxes. Call 360-430-0529. Location: Longviewits NOT ok to contact this poster with services or other commercial interests |
|
Assorted powertools - $5 (ne portland) (pic)
|
ne portland |
|
2009-06-17 6:59PM |
|
(1)Skill saw $12.00 each, Belt sanders $10.00 each(SOLD), (1) Sheet sander (craftsman)$10.00(SOLD), makita electric impact wrench $20.00(SOLD), jigsaws $5.00 each(SOLD), sawsall $10.00(SOLD) Call with ? 503-253-5819, thx. Location: ne portlandits NOT ok to contact this poster with services or other commercial interests |
|
CHICAGO BRAND MICROMETER SET - $125 |
|
|
2009-06-17 6:51PM |
|
BRAND NEW CHICAGO BRAND 0 TO 6 \" MICROMETER SET WITH 1 TO 6 STANDARDS IN PINE BOX!!! NEVER USED!!! ASKING 125.00 OBO!!! CONTACT JAKE OR CHARISA AT 503 995 5980its NOT ok to contact this poster with services or other commercial interests |
|
Hydraulic lift hand truck - $325 (n.e. portland) (pic)
|
n.e. portland |
|
2009-06-17 6:46PM |
|
Wesco 700# capacity hydraulic hand truck. 56 vertical lift. good condition. Contractor bought for specific job and then did not need. Cash or trade for Bosch Rotohammer. Call Matt 503-232-2844 Location: n.e. portlandits NOT ok to contact this poster with services or other commercial interests |
|
36" shop fan - $125 (n.e. Portland) (pic)
|
n.e. Portland |
|
2009-06-17 6:46PM |
|
Mobile tornado, one prop one speed, blow you away. Cash, or trade for Bosch rotohammer. Call Matt, 503-232-2844 Location: n.e. Portlandits NOT ok to contact this poster with services or other commercial interests |
|
Lots of Great Woodworking / Shop Tools for Sale (Vancouver, Wa) |
Vancouver, Wa |
|
2009-06-17 6:46PM |
|
I am selling all of my tools including:-Porter Cable 2 HP 6 Gallon Oil Free Air Compressor - $50-Porter Cable 1 ¼ inch 18 Gauge Brad Nailer with Case - $35-Porter Cable 2 ½ inch 16 Gauge Finish Nailer with Case - $50-Rigid 2 ¼ HP 6 Gallon Shop Vac with 2 ¼ Hose - $35-Delta 10 inch 15 amp Table Saw with Stand and Extension (18 inch rip capacity) - $75-Skil 3 by 18 inch 4.5 amp Belt Sander - $15-Rockwell 1 hp ¼ collet 6.5 amp Fixed Base Router - $15-Bosch 2 ¼ hp Router Kit - Fixed and Plunge Base and Case (¼ and ½ inch collets) - $125-Ryobi 6 inch Buffer - $10-Wagner Wide Shot Power Paint Sprayer – 6.6 GPH - $40-Bosch deluxe Router Guide (RA1054) - $20-Craftsman Fixed Base 9.5 amp 1 ¾ HP Router with ¼ and ½ inch collets and micro-adjustment-Woodline USA Panel Raiser Router Bit Set (model number WL-1356 and WL-1361)(http://www.woodline.com/p-1359-vertical-panel-raiser-15-facecut-12-shank.aspx and http://www.woodline.com/p-1367-2pc-rail-stile-cutter-roundover-12-shank.aspx) - $40-Woodline USA 66 piece Router Bit Set – ½ shanks (http://www.woodline.com/p-1730-66-piece-master-woodworker-set.aspx) - $90-Craftsman 10 inch Band Saw with Cast Iron table, Nice Fence, 1/3 HP (http://www.sears.com/shc/s/p_10153_12605_00921400000P?keyword=band+saw) - $75There is lots of other small stuff as well - hand tools, saw horses, clamps, and other tools I havent gotten around to listing yet. Location: Vancouver, Waits NOT ok to contact this poster with services or other commercial interests |
|
DURA-BLOCK PAINT GUN BRAND NEW - $220 (Chehalis) (pic)
|
Chehalis |
|
2009-06-17 6:32PM |
|
BRAND NEW DURA-BLOCK EXTREME PERFORMANCE 007 PAINT GUN VER.1 HVLP sells for over $400 new will for $220o.b.o never used it email or call (360)508-8791 or (360)740-7726Keywords- swamper, swampers, bogger, boggers, crawler, lift, lifted, huge, samurai, civic, honda, tool, tools, toyota, suv, car, truck, chev, ford, Location: Chehalisits NOT ok to contact this poster with services or other commercial interests |
|
Machine Tools (Wilsonville, OR) (pic)
|
Wilsonville, OR |
|
2009-06-17 6:23PM |
|
E.D.A #67RPrecision Block Level8” x 8” w/case - $350Mag Bore KCD-MN1Magnetic base drillIncludes Milwaukee½” drill motor - $450TapMatic R5Tapping head #6 – ½” capacity - $300Please call 503.349.8045. Location: Wilsonville, ORits NOT ok to contact this poster with services or other commercial interests |
|
Saw Horses, portable easy to fold and carry, holds up tp 2400 lbs max - $30 (Portland) (pic)
|
Portland |
|
2009-06-17 6:18PM |
|
503-421-3679 Location: Portlandits NOT ok to contact this poster with services or other commercial interests |
|
Variable Frequency Drive - $500 (Wilsonville, OR) (pic)
|
Wilsonville, OR |
|
2009-06-17 6:14PM |
|
ABB ACS 80010 HP VFD6 mo. old includes manuals Please call 503.349.8045. Location: Wilsonville, ORits NOT ok to contact this poster with services or other commercial interests |
|
LOOK-NEW Ellwood Safety Appliance Knee-Shin-Instep Guards -Save Big!! - $114 (Hazel Dell area, Vancouver, WA) (pic)
|
Hazel Dell area, Vancouver, WA |
|
2009-06-17 6:08PM |
|
See features listed below. These are model #334. They have never been used but have been in storage and show light shelf wear. All the straps, etc are present. These retail for $166.00 plus shipping online. Must Sell so you can save! $114.00/offer. Email this posting or call 503-708-1902 or 360-574-1230. Thank youFeatures: * Forms to the contour of the leg to provide protection from the knee to the instep of the foot * Sponge pads, top and bottom inside add comfort, absorb shock * Approximately 1.5 lbs. per pair * Shin guard with attached knee guard and instep guard * All guards except the Shin Guard are attached with a web sponge rubber hingenee Shin Instep Guard PlasticGet comfortable protection from the knee to the instep of the foot with these Plastic Knee Shin Instep Guards.Manufacturer: Ellwood Safety Appliance CoList Price: $166.00 Location: Hazel Dell area, Vancouver, WAits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman Drill Press - $200 (Beaverton) (pic)
|
Beaverton |
|
2009-06-17 6:07PM |
|
Craftsman Single Phase Drill Press with some drill bits Location: Beavertonits NOT ok to contact this poster with services or other commercial interests |
|
10" Radial Arm Saw w/ Table - $15 (Cornelius, OR) (pic)
|
Cornelius, OR |
|
2009-06-17 6:04PM |
|
I have a ShopCraft Model sc5110t2 10\" radial arm saw for sale. The saw works great but the table top needs to be repaired or replaced. $15.00 obo. Thanks, Steve Location: Cornelius, ORits NOT ok to contact this poster with services or other commercial interests |
|
Dino 3-In-1 Navigator Locksmith Scope - $170 (pic)
|
|
|
2009-06-17 5:57PM |
|
DINOs Navigator 3 in 1 Scope is the most unique locksmith scope in the market. It not only allows viewing and reading a wafer locks functions, but also picks the lock. It comes with 3 different sizes (6 pieces) hard depressors designed to fit into every different size wafer lock (long, short, big, small) and 1 uniquely 1.48\"\" long tube speculum designed for some hard-to-see areas and safe openings. DINOs Navigator 3 in 1 Scope is particularly effective opening AUTO LOCKS. I can onlyIf you decide to let me ship it To you then i will give you my number and we will be on the phone as i receive payments.After 5 minutes PROCESSING YOUR ORDER i will provide you with your tracking number!NOTE PAY PAL DO NOT ALLOW SCAM ARTIST TO TAKE PEOPLE MONEY THROGUH THIER SERVICE.AND WILL DIPUTE ANY MEBER STATING THAT THE NEVER RECEVED THEIR ITEM AND THEN REFUND YOU IN FULLThose is the item i currently have for sale! sale-jvh9c-1225470421@craigslist.org sale-9ebtr-1225465668@craigslist.org sale-nhw6q-1225459225@craigslist.org sale-wd7hn-1225456619@craigslist.org sale-tbntq-1225453907@craigslist.org sale-jv38v-1225449625@craigslist.org sale-e2exj-1225447073@craigslist.org sale-vnmxu-1225445579@craigslist.org sale-pf79v-1225442249@craigslist.org sale-adjgm-1225435546@craigslist.org sale-qkp7z-1225425461@craigslist.org sale-pgdrg-1225423266@craigslist.org sale-vzcrx-1225421133@craigslist.org sale-9zhhw-1225417062@craigslist.org sale-6hryh-1225412558@craigslist.org its NOT ok to contact this poster with services or other commercial interests |
|
GRIZZLY woodworking tools 3 HP Table saw and 8" Jointer - $2100 (Chehalis) (pic)
|
Chehalis |
|
2009-06-17 5:57PM |
|
This is a great deal on two quality low hour machines. Everything is in excellent condition! ~10\" Table saw, left tilting, 7 rails and 4 rails, 3 HP, 220 single phase, cast iron table, Shop fox classic fence, all sealed bearings, also includes shop fox mobile base. ~8\" Jointer 1.5 HP 220 single phase, table size: 9\" X 65\", 3 Knifes and a spare set (new), shop fox mobile base. These tools would be great for a small cabinet shop or a quality woodworker. $2100 O.B.O Leave message at (360) 388-1534 Location: Chehalisits NOT ok to contact this poster with services or other commercial interests |
|
pad printer, to print on uneven surfaces - $95 (inner se pdx) (pic)
|
inner se pdx |
|
2009-06-17 5:44PM |
|
pad printer, used for printing on uneven surfaces such as walnut shells. needs cleaning. comes with a catalog instruction manual. Very cool if you want to print on weird things. I never got around to using it & it’s just taking up space. sold as is. call Dan at 503-544-8003. $95 Location: inner se pdxits NOT ok to contact this poster with services or other commercial interests |
|
big hydraulic cylinders - $250 (inner se pdx) (pic)
|
inner se pdx |
|
2009-06-17 5:44PM |
|
four hydraulic cylinders available -- $250 each, obo. two are 8 inch bore, flat bottom top. two are 7 inch bore with pinion mounts. approximately two feet each. please do not email... CALL DAN at 503.544.8003. $250 each obo. Location: inner se pdxits NOT ok to contact this poster with services or other commercial interests |
|
Sullair Rotary Screw Compressor - $2850 (Welches) (pic)
|
Welches |
|
2009-06-17 5:44PM |
|
Sullair Rotary Screw Compressor5HP 480V 3 PhaseSound HoodDomnick-Hunter air dryerLike new condition, runs great!Sells for over $6,000.00 new, Im selling for $2,850.00 FIRMCall with any questions, Bob 503-318-9969 Location: Welchesits NOT ok to contact this poster with services or other commercial interests |
|
NAMCO THREAD ROLLER - $625 (TUALATIN) (pic)
|
TUALATIN |
|
2009-06-17 5:35PM |
|
NAMCO THREAD ROLLER 6 SET 7/8-14 1 SET 1-1/8-161 MYSTERY SETALL IN GOOD CONDITIONCALL TOM 503-319-7412 Location: TUALATINits NOT ok to contact this poster with services or other commercial interests |
|
Delta Rockwell Table saw. - $125 (ne pdx) (pic)
|
ne pdx |
|
2009-06-17 5:32PM |
|
Cast iron old delta. 3/4 hp. 115 v. 8 1/2\"blade. This is a solid and heavy saw. some rust on the body, but everything runs smoothly. 25\" ripping capacity. Mitre gage, and a couple of casters built into the base. alex Location: ne pdxits NOT ok to contact this poster with services or other commercial interests |
|
have some tools(framers) stuff and more take a look (lake oswego) |
lake oswego |
|
2009-06-17 5:30PM |
|
So here is a list.....remington 496 w/case new anywhere around 180.00 ....40 or best offer....skill saw worm drive for framing/or? 45. or best offer.....wet tile saw little one works great little use 30. or best........I have 2 tool belts a black AWT paid 80.last summer its worth 25 easy and the same a brown one a clc bag good condition 25. or best............... have a texture bucket with some attachments use with comp.. ladder the kind that will stretch out to 17 and folds to 4 ft or can be used as a plank.. little use some paint but nice bought it last year for around 150.00....... 60.00 or best offer and i have a 4 and a 7 levels nothing to fancy consider offers.... along with some mud tools and other tools most small hand tools ect, reason for sale is I can no longer work in this field, so if you need some of the above stuff Call 503-933-0780 Location: lake oswegoits NOT ok to contact this poster with services or other commercial interests |
|
next
100 Listings >
|
|
|
|
Search
Create Post
Goto Image view