Thomas Kinkade's Village Christmas- Christmas Cottage - $1875 (Clackamas)
Clackamas
This canvas is priced $575.00 under appraised value.Thomas Kinkade Gallery appraised it at $2450.00. This is #158/990 A/P Canvas. (Size 26\"X32\" in Brandy frame). This is \"Sold Out\" and sought after per gallery. Christmas depicts holiday preparations from a simpler time in a quaint village typical of those seen throughout the Sierra Foothills such as Thomass hometown of Placerville CA. The horse-drawn sleigh in the lower right-hand corner is from an actual model sleigh that is used in their home to store the childrens books.Includes Certificate of Limitation & Authenticity and Certificate of Hand-Highlighting by Master Highlighter, a daughter of one of the Beach Boys. This print is in excellent condition. Village Christmas features 4 hidden Ns in tribute to his wife, Nanette.Call Dennis 503 655 0201 Location: Clackamasits NOT ok to contact this poster with services or other commercial interests
Paasche Model D Air Compressor 1/4 h.p. - $125 (Clackamas)
Clackamas
I used this compressor a few times to paint small items and it has been in the closet for years. These are not common like the little ones. Professional model. Notice that the electric motor is a commercial model and made in USA. The following texts were lifted from the internet:Paasche’s workhorse for “H” and “VL” Series airbrushes. Features a “studioquiet” oil-less diaphragm and 1/4 h.p. motor to deliver .5 CFM @ 20-30 PSI (40 PSI maximum rating). Has a 1/4” male outlet to accept both C-072-215 (3/16”) and C-072-216 (1/8”) air hoses or C-072-218 3-Way Tee to operate two airbrushes if desired. #24 pounds $160 (their new retail price)from- airbrush-artist.orgPaasche Model D Compressor 1/4 horsepower - The kind of compressor I have. If you are going to get an electric compressor, dont pinch pennies, get at least a 1/4 horsepower. This is what my airbrush teacher told me, and I believe him. We saw examples of artwork made with less powerful compressors. They had a slightly \"spattered\" look, because the air just couldnt push out the paint well enough to make a clean, rich line with the airbrush. (See my little demonstration illustration.) The \"bad\" example is what an airbrush stroke can look like with a less powerful compressor. All spattery.This durable, \"studio quiet\" oil-lessdiaphragm air compressor is idealfor home, office, studio or workshop.It is the workhorse of the PaascheAir Compressor line. Designed for usewith any airbrush and delivers up toapproximately 40 lbs of pressure. Equipped with a six foot 3 wirecord and on/off switch. The D operateson 115 volt, 1 phase, 60 cycle,1/4 H.P., 4.4 amps and delivers.5 CFM @ 20 P.S.I.$195 (their new retail price) Location: Clackamasits NOT ok to contact this poster with services or other commercial interests
Here is a lapidary Lortone 8\" arbor. The bearings actually seem tight with no slop, and the arbor spins freely. There is a carborendum wheel that is nearing its end, and a very nice belt strip wheel. This is the wheel that you cut a piece of belt length, and feed both end into a slot in a bolt, then turn the bolt to tighten the belt down (much like a truckers tie down). There is a lot of surface rust that started to pit, but the unit still looks, and feel solid. I scraped away all of the rust that was flaking, but I could not find a pin hole, or a week point anywhere. A little POR-15, and this unit is good as new. I do not have the covers for this unit, that is why it is so cheap, so if you are one of those guys that can easily fabricate a cover out of metal, plastic. or wood, and save yourself a large chunk of change, this unit is for you. 503-997-2602 Location: Clackamasits NOT ok to contact this poster with services or other commercial interests
Lapidary 8" arbor - $225 (Clackamas)
Clackamas
I have a Poly 8\" arbor with 2 expandable wheels, one end polisher, spitters and pump, and motor. This unit also has valves for recirculating water on top, and a hole in the pan if you want to install a drain into a bucket (this will need a plug if you are not going to use it). The bearing seem tight with no play in any direction, the belt is in good shape, plus there is a 3 stage pulley . All of this for $225.503-997-2602 Location: Clackamasits NOT ok to contact this poster with services or other commercial interests
BEAUTIFUL desert painting. 3' deep (shadow box type) frame (Clackamas)
Clackamas
A pueblo scene in early evening. The frame is 3\" deep and TRIPLE Matted, with almost 3/4\" between each layer. The result is a layered affect that almost feels like youre looking through a window at the desert.A beautiful hand made, hand painted raised relief painting. Items on painting were sculpted and attached to the surface to produce art that literally rises off of the canvas to come to life.Picture was professionally mounted. The Frame is 3\" thick by 38\" wide, by 32\" tall. (Framing alone was over $300.00A beautiful addition to your home!********Mike*****(503) 519-0273***********$140.00********** Location: Clackamasits NOT ok to contact this poster with services or other commercial interests
Creative Memories Memory Mates canvas tote - $10 (Clackamas)
Clackamas
This Creative Memories tote is no longer available through the company. Made of black canvas with multiple pockets for your CM supplies. Location: Clackamasits NOT ok to contact this poster with services or other commercial interests