Milwaukee Straight Shooter stand up autofeed screwgun. Easy tool-free bit change, 1-3/4\" to 3\" screw range makes it useful for decks and subfloors. works great!541-279-1018 Location: Redmondits NOT ok to contact this poster with services or other commercial interests

Works fine.Call Rick 390-6644 Location: NE Bendits NOT ok to contact this poster with services or other commercial interests

Nikota 2hp twin tank air compressor. Runs good. 4 gallon tankCall Rick 390-6644 Location: NE Bendits NOT ok to contact this poster with services or other commercial interests

Roybi laminate trim router with the laminate trim attachments and a trim bit.Call Rick 390-6644 Location: NE Bendits NOT ok to contact this poster with services or other commercial interests

Works great. Call Rick at 390-6644 Location: NE Bendits NOT ok to contact this poster with services or other commercial interests

red plastic tool box with misc tools. i belive all are taiwan brand. some rusted , some not. some new- some old, some cleane- some not. any ways you get the picture. donot know if there is a full set of anything. would make a good loaner set so your good ones donot come up missing $5.00 sold as is. call mark @ 526-0759 and please leave a message Location: red.its NOT ok to contact this poster with services or other commercial interests

this could be used for a tool cart or ? cart is 24\" wide , 41\" long, 30\" tall [not counting handle], bottom shelf is metal top was opened so i put some plywood on it to hold my tool box. has 4 swivel casters. cleaned up gaurage and no longer need. $50.00 OBO call mark @526-0759 & please leave a message i will call back. Location: Red.its NOT ok to contact this poster with services or other commercial interests

im selling a matco stret rod edition box blue looks good no damage contact me jeff @ 541-647-0046 or jmoney187@live.com Location: bendits NOT ok to contact this poster with services or other commercial interests

DeWalt 1hr charger....9.2 to 18 volt....used, but works well.......$25.00 Location: bendits NOT ok to contact this poster with services or other commercial interests

Skil belt sander, 3X18in. belt size.......$20.00 Location: Bendits NOT ok to contact this poster with services or other commercial interests

Full set of placing and finishing concrete tools. Includes 1 rebar cutter/bender, hand tamp, roller tamp with 24 of extensions. Aluminum bull float, wooden bull float, 2-36\"Fresno blades, one with rounded corners and one with square corners with 30 of extensions, weights for the blades, Marshall Town hand trowels, aluminum hand floats, edgers, special made edgers, walking edger, jointers, margin trowels, This is all the tools you will need to place and finish concrete at a great price!! Location: Bend Or.its NOT ok to contact this poster with services or other commercial interests

Snap On tool boxes. Top and bottom. Like new condition. For the serious mechanic. Location: Madras, Oregonits NOT ok to contact this poster with services or other commercial interests

For Sale - $15,500200 ton 10 Pacific Press BrakeManual GaugeComes with 2\" Die and Upper Punch.Will load it onto your truckWorks great. We just upgraded.Call or Email with any questionsLocated in Reedsport, OregonFred Wahl Marine Construction541-271-5720Open from 8:00am to 4:30pm. Weekdays only. Location: Reedsportits NOT ok to contact this poster with services or other commercial interests

Brand new set of Craftsman grip-n-drive screwdriver set.Never used, still in package.Make an offer. Location: Redmondits NOT ok to contact this poster with services or other commercial interests

Doesnt look new but will do the jab. Location: CCR (Terrebonne)its NOT ok to contact this poster with services or other commercial interests

not that old but has been ouside sence new hoses are still good has o2 bottle and cart ,it is set up for propane can have one bottle your choice call kyle @ 536-5424 Location: lapineits NOT ok to contact this poster with services or other commercial interests

BIG TOOL BOX. DECENT SHAPE. 2 BOTTOM DRAWERS NEED A LITTLE TLC BUT WORKS GREAT. $125 OBO 419-6908 Location: REDMONDits NOT ok to contact this poster with services or other commercial interests

Big bench vice. multi pivot. 5\" jaw$45.00Please call Ted 541 280 3083 Location: Redmondits NOT ok to contact this poster with services or other commercial interests

Good shopvac. $40.00 cash Location: Redmondits NOT ok to contact this poster with services or other commercial interests

Red Craftsman tool chest with tools. Not in excellent condition as 2 of the lower drawers are messed up. I think they are fixable though.if interested please CALL, as I seldom get on my emails280 3083 Location: Redmondits NOT ok to contact this poster with services or other commercial interests

25-140 amp output115 volt inputnorgas-9 tanksmith guages miller gun 10 lbs. of .030call Jesse(541)-359-5202 Location: Terrebonneits NOT ok to contact this poster with services or other commercial interests

Sears Compressor Leeson 3 Horse motor,1740 rpm. 50 gal tank ? If any Question call 541-462- 3361 or 541-462-3182 Thank you. Location: Mitchellits NOT ok to contact this poster with services or other commercial interests

Are you a bad a$$ because if your not this TV is not the one for you. 73 inch Mitsubishi Medallion edition.HD 1080 integrated card with every in/out you could ever want. S video, RCA, component, DTV, and card reader so you canview pics or videos from your dig. camera, or hook any game system, DVD player or whatever. Perfect picture. I just had it realigned professionally. Im 6ft tall and I cant reach corner to corner. This is top of the line.Original recipt taped to back for 8700$. Thought Id post in tools cause thats where the real mf men are lookin. Location: NE Bendits NOT ok to contact this poster with services or other commercial interests

Black and decker cordless drill forsale for $15. Mint condition - used only once!!! Ask for Justin or Taryn. 541-306-4384 Location: Bendits NOT ok to contact this poster with services or other commercial interests

1974 Shop Smith Mark V in good conditionTable Saw w/fence-Metal Miter Gage, w/clamp system-50 teeth combo saw blades (x2)-Rip cut blade (10”)-200 teeth plywood blade-6” stackable Dado blade set-Dad blade table insertBand Saw -1 blade installed/on machine w 3 extra bladesDisc drum sanderDrill pressMini-lathe with bowl accessory4” jointer attachmentAccessory coupling kit (add more accessories to power off main power plant)The Shopsmith was the primary tool used by the guy I bought it from. He had a small shop and appreciated the extra space the Shopsmith provided. Due to the larger shop size I’ve decided to go with individual machines. If you have a small shop or garage setup, many online swear by the Shopsmith Mark V line.Used good condition Mark Vs go for $995. I paid less than that and am asking for $750 or a reasonable offer.Note: I do not have the owner’s manual and have not put the whole system together. A manual can be purchased online at www.shopsmith.com for roughly $15.Call 541-536-3601 if questions or to set up a viewing time. Location: LaPineits NOT ok to contact this poster with services or other commercial interests

I HAVE A SMORGESBORG OF GAS WEED EATERS FOR SALE AND A BLOWERFROM 40$ TO 100$ OBO SEE MY ADDS IN THE GARDEN SECTIONOR CALL 410-6807 FOR MORE INFOHERE ARE SOME OF THEMTHANX Location: REDMONDits NOT ok to contact this poster with services or other commercial interests

Need to cut some beams? This attachment for worm drive saws (Skill Model 77 and others) works like a charm. I used it to cut the ogee curves on the free end of 4\" and 6\" x 12 \" deck beams: havent used it since.541-383-9056 Location: Bendits NOT ok to contact this poster with services or other commercial interests

newer poulan pro chainsaw. 18\" bar. used for only a month to cut some trees after buying brand new. comes with carry case.chainsaw runs and cuts great! no longer need it.. taking up space in the garage. asking $100 obo.. offers welcome, just no longer need it. call 541-728-4459 chris.thanks! Location: redmondits NOT ok to contact this poster with services or other commercial interests

I have a Leatherman Wave with case. Its as good as new. I will take offers. Let me know. Send me an email. Thanks. Location: Redmond/Bendits NOT ok to contact this poster with services or other commercial interests

Complete with case, manuals, aluminum tripod and telescopic 8 rod; 50 degree up and down elevation.541-383-9056 Location: Bendits NOT ok to contact this poster with services or other commercial interests

Coleman 4000 watt Generator... 33.3 amps 120 and 240 voltThis Generator will run most pumps and/or appliances. It has both 120 volt and 240 volt receptacles. It might have 10 hours on it. We purchased it so to run our pump so to pump out of our pond in case of a forest fire. We have a wood shake roof and live in Sisters.The gas engine has a cast iron sleeve and is made by Tecumseh. I know of people that have put an automotive muffler on this industrial type of generator and use them for camping and/or hunting.This Coleman Generator has very few hours and is very powerful.$265.00 541-549-2028 leave a message Location: Sistersits NOT ok to contact this poster with services or other commercial interests

Partner K700 Active 3. Call 541-420-7224. Location: Northeast Bendits NOT ok to contact this poster with services or other commercial interests

extra large stand $50.00 obo541-771-2584 Location: lapineits NOT ok to contact this poster with services or other commercial interests

Black and Decker 9.6V cordless drill with charger. In original hard carrying case. Great working condition - $10!!Ask for Justin or Taryn. 541-306-4384 Location: Bendits NOT ok to contact this poster with services or other commercial interests

Craftsman 12\" radial arm saw in good working condition. Comes with 12\" carbide blade. Call (970) 309-0878 Location: Bendits NOT ok to contact this poster with services or other commercial interests

One case 16 penny coil gun nails. Purchased in 1996, none were ever used. Case is COMPLETE with 18 coils. $25.00 OBO. Got rid of storage unit, getting ready for garage sale. Call: 410-4743 or 419-9021 Location: East of SISTERSits NOT ok to contact this poster with services or other commercial interests

Heavy duty metal dolly. The length is 41 3/8\" long x 22 1/2\" wide x 5 1/2\" high. It has a heavy duty metal frame and castors and will easily carry 500 lbs. It came from a copy machine that weighed around 1000 lbs. There are two adjustable locking legs to stabilize it if needed. $25.00 389-1435 Location: Bend Oregonits NOT ok to contact this poster with services or other commercial interests

Industrial size Jet table saw with fence with extra table, Can cut a full 4ft by 8 ft sheet - $400 OBO. 541-391-2484 or dhatcher2002@hotmail.com NEED GONE ASAP thanks Daniel I can deliver Location: Redmondits NOT ok to contact this poster with services or other commercial interests

Craftsman Table Sawworks great just dont have the work to justify keeping it. Location: BENDits NOT ok to contact this poster with services or other commercial interests

PLANT CLOSURE SALE 5/4 Thick x 24\" Wide x 72\" Long.......$120.005/4 Thick x 24\" Wide x 80\" Long.......$133.005/4 Thick x 30\" Wide x 96\" Long.......$180.00, ( butcherblock)Finish Sanded, sanding sealer appliedStrong Laminated Veneer Lumber, ( LVL ), Bases also availableFree Delivery Hwy. 97 its NOT ok to contact this poster with services or other commercial interests

14 k trailer ramps 13\" x 5 Location: bendits NOT ok to contact this poster with services or other commercial interests

Hardly used Paslode cordless framing nailer...great for pickup work and remodels.Comes with case, extra battery and charger! Location: Bend, ORits NOT ok to contact this poster with services or other commercial interests

This heater will throw out some serious heat...will heat a whole house!Propane with built in t-stat. Location: Bend, ORits NOT ok to contact this poster with services or other commercial interests

Only used a few times...what a time saver!!! Location: Bend, ORits NOT ok to contact this poster with services or other commercial interests

We are moving and cannot take this handy DE WALT TABLE SAW with us so it is PRICED TO SELL! Bought a couple of years ago, and rarely used!I can show this at most anytime! Give me a call on my cell (503) 730-0629.The DeWalt DW745 is a compact portable table saw allowing for rip capacity up to 16 and offers a patented telescoping rack and pinion fence to help maintain the accuracy of the fence to the blade. The table saw has a metal roll cage with rubber feet to withstand the rigors of heavy duty jobsite usage. The DW745 is perfect for cutting hardwoods or sheet materials. 15 Amp motor quickly rips through hardwoods with easeRack & Pinion fence design delivers consistent fence to blade parallelismTelescoping fence rails retract to create a small, portable package16\" of rip easily cuts a variety of larger shelving and trim materialsMetal roll cage base offers greater durability than plastic basesBlade can be adjusted 0 - 45 degrees for bevel applicationsTable coating reduces friction for smoother cuttingWeighing only 45lbs., the DW745 can easily be moved on and off the jobDust port allows for 2-1/2\" vacuum hook up and minimizes clean upAdjustable rear feet designed to level the saw on uneven work surfaces The DW745 Includes:Miter GaugePush Stick10\" 24T Carbide BladeBlade Guard Location: Bendits NOT ok to contact this poster with services or other commercial interests

Ridgid Air Compressor 4.9 CFM @ 90 PSI. Asking $130 Would consider offer. Location: Christmas Valleyits NOT ok to contact this poster with services or other commercial interests

come along style wall jacks will lift walls up to 12 tall. Makes framing with less people more back friendly. Location: bendits NOT ok to contact this poster with services or other commercial interests

palm nailer style that takes clips of teco nails Location: bendits NOT ok to contact this poster with services or other commercial interests

6\" Bench Grinder with Flexible Lamp. Brand New. 593-5338 Location: Sunriver Areaits NOT ok to contact this poster with services or other commercial interests

Central Machinery 8\" Drill Press, 1750 RPM, 1/3 HP, 1/2\" chuck, Spindle Speeds 620,1100,1720,2340 &3100 RPM. Like New. 593-5338 Location: Sunriver Areaits NOT ok to contact this poster with services or other commercial interests

Like New Condition , if interested call 593-5338 Location: Sunriver Areaits NOT ok to contact this poster with services or other commercial interests

OLDER CRAFTSMAN LATHE has a grinding wheel on it at this time. The overall length is 54\" Location: SISTERSits NOT ok to contact this poster with services or other commercial interests

Standard sized tool box made to fit any normal large truck.Email with any questions, leaving a call back number, and we will get back to you as soon as possible. Location: BENDits NOT ok to contact this poster with services or other commercial interests

Black Rolling Tool Chest. Husky. 12 drawer. $375.00 Call Jeff 541-508-8245 Location: Bendits NOT ok to contact this poster with services or other commercial interests

10\" electric craftsman table saw with 2 extra blades.all parts intacted, barely used, been in storage for 2 years.Was used when we bought it, but is still in excellent condition.If interested, respond via. email with any questions, leave a number to call back on and we will call if requested. Location: BENDits NOT ok to contact this poster with services or other commercial interests

Meyer straight edge Plow 7ft - $2700@ Big Mountain Towing hwy 58 Please call or stop by, no emails Location: Crescent Lakeits NOT ok to contact this poster with services or other commercial interests

Mostly screwdrivers of all kinds, wrenches, sockets, hammer, saw, screws, bolts, leveling stuff, weird asorted stuff plus the toolbox itself. Pics tomorow if not sold--- Location: Bendits NOT ok to contact this poster with services or other commercial interests

Troy-Built 8000 watt electric start generator15 HP B&S engineused for one week on one job!Paid $1100.00!!comes with 4-way power cord13,500 starting watts 220v 115v Location: Bend, ORits NOT ok to contact this poster with services or other commercial interests

Only used on several occasions! In great shape 24 Scaffold Plank. Original cost was $475.00OSHA approved! Location: Bend, ORits NOT ok to contact this poster with services or other commercial interests

This industiral air compressor is a three phase, 150 bars max psi , 500 hrs used on machine. Screw style air compressor with air dryer. Location: ORits NOT ok to contact this poster with services or other commercial interests

Compete HELI COIL kit.. used 4 or 5 times..paid over $120 for it new.. first $45 takes it.. OBOcall 279 7589 Location: REDMONDits NOT ok to contact this poster with services or other commercial interests

I have a Honda Welder (EW170) that i wont be using any more..It is a real workhorse, i used it one season to run my irragation pump in the back 40, (thats why it is mounted on a small trailer, so i could pull it back and forth to the pond), It starts on the first pull. and ran on one tank of gas for well over 9 hours. It is a little dusty from sitting in the barn all wnter, but i can wash it off it need be..I might be intereste in a part trade of ??Maybe a good riding lawn mower or a ton of GOOD horse hay.. I have it priced at $750.00 OBO. Give me a call at 541-526-0384 and ask for Diane Thanks Location: Redmondits NOT ok to contact this poster with services or other commercial interests

We are moving and cannot take this heavy duty PIPE BENDER with us, so it is PRICED TO SELL!Wil-Bilt PIPE BENDER 12 ton Hydraulic Jack on stand.1/2\", 1\", 1-1/4\", 1-1/2\"Purchased a couple of years ago, and used just a couple of times!I can show this at most anytime! Give me a call on my cell phone (503) 730-0629 Location: Bendits NOT ok to contact this poster with services or other commercial interests

Only used once payed over 200 for it. It used any kind of fuel.541-536-9002 Location: La Pineits NOT ok to contact this poster with services or other commercial interests

18 Drawer Mac toolbox with side boxes. Excellent shaper - no stickers. $1800.00 OBO 788-1035 Location: Bendits NOT ok to contact this poster with services or other commercial interests

I have a brand new never used Marshalltown Sharpshooter I Hopper Gun. Comes with the 45 degree adapter for the hopper. Purchased new for over $110, yours to take for $75. Brand New! Location: SE Bendits NOT ok to contact this poster with services or other commercial interests

Two Fall restraint setups $100.00 a pieceits NOT ok to contact this poster with services or other commercial interests

8042 FOR RENT. 250 DAY, 800 WEEK, 1,700 MONTH----GENIE 45 200 DAY, 720 WEEK, 1400 MONTH***LONG TERM NEGOTIABLE***541 948 2050 Location: bendits NOT ok to contact this poster with services or other commercial interests

I am selling a Dewalt Jigsaw w/carrying case in perfect working order... Location: Bendits NOT ok to contact this poster with services or other commercial interests

I have for sale a Senco 1/4\" Crown Stapler w/case and manual... In perfect working order... Location: bendits NOT ok to contact this poster with services or other commercial interests

I am selling a Makita Router in perfect working order w/case... Location: Bendits NOT ok to contact this poster with services or other commercial interests

I have for sale a Bosch SDS Jigsaw in perfect working order... Location: Bendits NOT ok to contact this poster with services or other commercial interests

I have for sale a Makita 18 Volt, 7 1/4\", Sliding Compound Mitre Saw with 3 Batteries, Charger, and Carrying Case in perfect working order... Location: Bendits NOT ok to contact this poster with services or other commercial interests

Ingersol rand screw compressor I bought for our shop but could not use it is three phase i only have 220 so if you need a good industrial compressor for half the price of new call and we may make a trade either money or what ever you have to trade rob 541 413 0754 or work 541 573 6377 Location: burns orits NOT ok to contact this poster with services or other commercial interests

Ryobi Radial Arm Saw 8 1/2\" (210 mm) in great condition, bearly used! Location: Bendits NOT ok to contact this poster with services or other commercial interests