Paslode Cordless Finish Nailer - $235 (Tulsa, OK)
Tulsa, OK
Paslode cordless finish nailer with two batteries included. This shoots a straight 16 gauge nail. Nail lengths from 3/4\" to 2-1/2\". Takes the standard fuelcell. I paid over $400.00 for this gun and it has hardly been used. Idela for service work. You can buy with confidence that this tool is not stole. 918-808-6208 Location: Tulsa, OKits NOT ok to contact this poster with services or other commercial interests
pipe clamp - $10 (ba)
ba
pipe clamp visegrip Location: baits NOT ok to contact this poster with services or other commercial interests
Porter Cable cordless brad nailer - $165 (Tulsa, OK )
Tulsa, OK
Poreter Cable cordless brad nailer with two batteries. This nailer takes the standard 18 gauge straight nails. This gun can be used with air if needed and the batteries are low. Ideal for service work so you dont have to carry a compressor and hose. Paid over $350 for it and hardly used it. You can buy with confidence that this tool is not stole. 918-808-6208 Location: Tulsa, OK its NOT ok to contact this poster with services or other commercial interests
Dewalt cordless Sawsall - $100 (Tulsa, OK)
Tulsa, OK
Almost new Dewalt 18 volt cordless sawsall. Only has one battery. I have the other battery for it however it will not take a charge. This is a great sawsall with easy blade replacement feature. You can buy with confidence that this tool is not stolen. 918-808-6208 Location: Tulsa, OKits NOT ok to contact this poster with services or other commercial interests
Porter Cable sawsall - $95 (Tulsa, OK)
Tulsa, OK
Poreter Cable Tiger saw varible speed with quick change blade feature. This is a great sawsall that most of the pros use. Buy with confidence that this tool is NOT stolen. 918-808-6208 Location: Tulsa, OKits NOT ok to contact this poster with services or other commercial interests
Craftsman 14.4 cordless drill - $45 (Tulsa, OK)
Tulsa, OK
Craftsman 3/8\" varible speed reverseable 14.4 volt cordless drill-driver almost new. Two batteries and charger. Two available. Price is for each one. You can buy with confidence that these are not stolen. 918-808-6208 Location: Tulsa, OKits NOT ok to contact this poster with services or other commercial interests
Hilti 600-n gun & pole - $550 (Tulsa, OK)
Tulsa, OK
This is an almost new 600n Hilti powder actuated gun with the extension pole that extends the unit 6. I paid over $1200.00 new for these. You can buy with confidence that these are NOT stolen. 918-808-6208 Location: Tulsa, OKits NOT ok to contact this poster with services or other commercial interests
Works perfect only used a few time but now I never use it. Need space in my shop. Call me, text or email me with offers.Ray918-231-6217rashlock@wellmanproducts.com Location: Kellyvilleits NOT ok to contact this poster with services or other commercial interests
Contact Howard (918) 521-8868Very old Westbend Lathe with >12\" throw4 Jaw Chuck Location: Skiatookits NOT ok to contact this poster with services or other commercial interests
Very old Superior Drill PressContact Howard (918) 521-8868 Location: Skiatookits NOT ok to contact this poster with services or other commercial interests
Line Shaft Equipment from Blacksmith Shop - $4000 (Skiatook)
Skiatook
Contact Howard (918) 521-8868Buyer responsible for removing equipmentPrice for all: $4000Line Shaft Equipment for sale:Post Drill - Canedy-Otto Mfg. Co., Chicago Heights, Ill., Improved No. 16Threading Machine - Greenfield Tap & Die Corp., Greenfield, Mass.Band Saw - The Silver Manufacturing Co, Salem, Ohio, USA 1030PlanerRip SawGrinder - Crescent New Model No. 432 feet of line shaft with multiple wheels, bearings, etc.MotorSwitchNon-Line Shaft Equipment for sale:Blower - Champion Blower & Forge Co., Lancaster PA, on 3 leg standBlower - Buffalo Forge Co., No. 2E ElectricPlatform Scales - FairbanksHand Shear - Edwards No. 10B Location: Skiatookits NOT ok to contact this poster with services or other commercial interests
MAC Tech 1000 box with tools - $5500 (918)
918
have seen people selling boxes not as nice as this one for $5500, but this one is fully of tools you cant beat this deal. MAC Tech 1000 toolbox and tools set. Snap-on and Mac Tools, some Matco and Craftsman tools, mainly metric great for working on Toyota or Honda. Toolbox is in near perfect condition, with the upgraded chrome wheels. I quit working on cars so I no longer need them. I have around $10k-11k invested now asking $5,500 or OBO. Dont want to part out, want to sell as a kit. Have more pics, I can email if wanted. List of Tools (im sure i missed some tools) -Wrenches 8-19mm ratcheting wrenches - Blackhawk Open-end Box-end Wrenches 10-19mm snap-on 7,8,12,14,17,19,22,24,27mm snap-on box end -box end 12mm,14 combination snap-on 10, 12, 14, 17mm brake wrenches snap-on pipe wrench - no name chain wrench - no name -sockets, and ratchets 3/8\" Impact sockets 10-19mm deep and shallow - mac 10-19mm shallow wobble - mac 10-19mm reverse impact sockets 3/8\" Chrome sockets 8-19mm deep and shallow - snap-on T30, T40, T45, T50, T55 torx sockets- snap-on 8, 10mm allen -snap-on 1 snap-on oil filter cup 3/8\" 1 mac oil filter cup 3/8\" 3/8\" ratchets 2 chrome - snap-on 1 pivoting head 8\" - mac 3/8\" extensions 3 3\" chrome - snap-on 1 6\" chrome - snap-on 1 12\" chrome - snap-on 1 3\" impact - mac 1 6\" impact - mac 1 12\" impact - mac 3/8\" spark plug sockets Have 4 different sockets two with extension attached two with out all snap-on 1/2\" Sockets 10mm-19mm deep and shallow chrome - snap-on 27, 30, 32, 34mm impact sockets - mac 10,12,14,17,19,21,22mm chrome snap-on 1/2\" extensions and ratchets 1 3\" chrome - snap-on 1 3\" impact - mac 1 12\" chrome - snap-on 1 12\" impact - mac 1 1/2\" ratchet - craftman Impacts Guns Mac aw3800 3/8\" impact Mac aw5500 1/2\" impact Dewalt 3/8\" electric impact Dewalt Light Mac 3/8\" air ratchet Mac 1/4\" air ratchet 24\" breaker bar mac 1/2\" 18\" breaker bar snap-on 1/2\" Pliers 8\", 10\", 12\" knipex cobras from Mac Long 90degree, 2 long 45degree, long staight MAC needle nose 2 short needle nose - snap-on 2 wire cutters - snap-on 2 slip-joint pliers- snap-on spark plug boot pliers - snap-on oil fitler pliers - snap-on brake tool pliers -snap-on 6 piece vise grip set - Vise Grip from mac multi plier - mac multi plier - snap-on Screw Drivers 4piece pick set from -snap-on mini torx set 4 piece -snap-on mini screw driver set - snap-on Phillips screw drivers 2 #1 snap-on 2 #2 snap-on 1 #3 snap-on Slotted screw drivers 2 #1 snap-on 2 #2 snap-on 2 #3 snap-on 2 ratcheting screw driver-snap-on 3 snap-on scrapers 1 snap-on bastard file 2mm-12mm allen set -snap-on 4 big allens snap-on not sure on size punch and chisel set - snap-on 2 snap-on wire brushes snap-on torque wrench cam gear wrench - mac Multi bolt grip set - mac mac compression kit 48 piece rethread kit bluepoint vaccuum gauge set Mac 90degree air grinder with grinding wheel, brushes and stones 1/4\" stuff 5, 5.5, 6-15mm deep chrome snap-on sockets 10, 12mm wobble sockets impact mac 4-15mm shallow chrome snap-on sockets 4\" extension chrome snap-on 2\" extension chrome snap-on some torx sockets and other random snap-on sockets 24\" pry bar -snap-on 24\" pry bar -mac Location: 918its NOT ok to contact this poster with services or other commercial interests
Log Chain 15' $12.00 Sapulpa - $12 (Sapulpa)
Sapulpa
Good 15 foot log chain with 2 hooks Location: Sapulpaits NOT ok to contact this poster with services or other commercial interests
NEW in Package Pocket Knives - For Personal Use or ReSale (South Tulsa)
South Tulsa
I have a large stock of brand new in original boxes and packaging folding pocket knives for sale. I have been selling these on ebay and wanted to open up to the local market as well. These would be great items to sell at flea markets, & retail stores, to purchase for personal use, or give as gifts.I have many different styles, colors, sizes, blade types, and accessories. All knives have 440 Stainless Steel blades regardless of the handle style and material. Most items will be $2.50 each to $5, some are a little higher priced but deals can be reached and discounts given for larger purchases. I have included some sample photos but encourage you to contact me and come by to take a look at what I have for sale if you are interested in nice knives for a good price. You can call me directly at 918-955-9090 or e-mail me through Craigslist, my name is John. Location: South Tulsaits NOT ok to contact this poster with services or other commercial interests
Used Black & Decker Drill.Runs great Location: 71 & Hwy 75 Tulsaits NOT ok to contact this poster with services or other commercial interests
mac toolbox - $1600 (coweta)
coweta
this is a33 drawer 50th anniversie tool box contact me for more info Location: cowetaits NOT ok to contact this poster with services or other commercial interests
Radial arm saw - $100 (Mannford)
Mannford
This is a ten inch Montgomery Wards radial arm saw with a disk sander. Works good!918-865-3739 Location: Mannfordits NOT ok to contact this poster with services or other commercial interests
Two large chain style pipe wrenches - $50 (Owasso)
Owasso
Two large chain style pipe wrenches in good condition. Call, text, or email Dewy 918 760 0091 Location: Owassoits NOT ok to contact this poster with services or other commercial interests
The router on the table is fairly new. Its a 1 1/2 horse and the other is as well. The other router is a little older maybe early 90s Location: Sapulpa/Broken arrowits NOT ok to contact this poster with services or other commercial interests
Peerless electric 1750 rpm 3 phase motor. Was on commercial air compressor. Works fine. Very heavy. CASH ONLY obo. I come to Tulsa area weekly and can work out delivery if needed. Location: Tahlequah, Okits NOT ok to contact this poster with services or other commercial interests
Snap-on Vacuum Tester SVT270P - $85 (tulsa)
tulsa
Snap-on Vacuum Tester SVT270P, Pump and Gauge in excellent condition. Gauge reads 0 to 30\" mercury (0 to 76 cm). Features aluminum construction with reverse pistol grip for simple one hand operation. Attaches directly to unit being tested or with one of its adapters. New costs $118 + tx ... asking $85 firm .. please send your phone for mine. Location: tulsaits NOT ok to contact this poster with services or other commercial interests
Two Dead Little Giant Pumps for Parts - $35 (tulsa )
tulsa
Two Dead Little Giant Pumps for Parts .. these sold for $300 each new... asking $35 firm for both Location: tulsa its NOT ok to contact this poster with services or other commercial interests
Heavy Duty Carts.. easily supports 1,500+ lbs - $75 (tulsa )
tulsa
Heavy Duty Cart... easily supports 1,500+ lbs, has large & tall solid steel train type wheels that can roll over rough surfaces like gravel. Please dont mistake this for a normal cart, weights 250+ lbs. top is 28in x 48in asking $75 firm... please send your phone for mine. pictured cart may not be the exact one you get. Location: tulsa its NOT ok to contact this poster with services or other commercial interests
Fluke 87 True RMS Multimeter - $185 (tulsa )
tulsa
Fluke 87 True RMS Multimeter ... 6 months old... condition is like new as received from Fluke. Step up to the best... Fluke 87 are acknowledged as the best in the industry and set the benchmark for all others. News costs is $350+ ... asking $185 firm... please send your phone for mine. pics soon Location: tulsa its NOT ok to contact this poster with services or other commercial interests
Dewalt 1/2 in Angle Drill - $75 (tulsa )
tulsa
Dewalt 1/2 in Angle Drill ... this is a heavy duty angle drill with 1/2 in chuck for those tight jobs. asking $75 firm.. please send your phone for mine Location: tulsa its NOT ok to contact this poster with services or other commercial interests
Cushman / golf cart 36v Battery Charger 25amps - $75 (tulsa )
tulsa
36v Battery Charger 25amps ... this is an old Cushman 36v 25amp lead acid battery charger. this is an industrial duty charger that can charge any 36v lead acid battery system. leads fits Cushman Carts, but can be easily changed to fit most any 36v electric vehicle. weight is 39lbs ... please dont mistake this for a lessor built charger. these are heavy duty and built with solid copper to last. new 36v chargers costs $375... asking $75 firm... please send your phone for mine. Location: tulsa its NOT ok to contact this poster with services or other commercial interests
Milwaukee Job Site Radio - $55 (tulsa )
tulsa
Milwaukee Job Site Radio in good working conditionnew costs was $130... asking $55 firm... please send your phone for more info Location: tulsa its NOT ok to contact this poster with services or other commercial interests
Black & Decker Band Saw - $40 (tulsa)
tulsa
Black & Decker Band Saw Drill Powered asking $40.00 Does not come with drill or blades.918-734-2066 Location: tulsaits NOT ok to contact this poster with services or other commercial interests
COLEMAN 6875 11HP 5500 WATTS GENERATOR - $350 (TULSA, OK)
TULSA, OK
~Up for sale is a Coleman Powermaster Model 6875 with a 11 HP Tecumseh Engine with 5500 watts it has 4 110 plugs and a 220 plug. The generator is in very good condition and runs great. Location: TULSA, OKits NOT ok to contact this poster with services or other commercial interests
20’ Extension Ladder - $25 (Jenks, OK)
Jenks, OK
$25 oboWerner 20’ Extension LadderEmail Kimberly at: lakekeystone717@gmail.com or call at 899-2190.Thank you! Location: Jenks, OKits NOT ok to contact this poster with services or other commercial interests
Older Snapon tool box - $1000 (okc)
okc
Older Snapon tool box dry slides. Come see it if you are a serious buyer Location: okcits NOT ok to contact this poster with services or other commercial interests
Manual Reel Lawn Mower - $40 (Jenks, OK)
Jenks, OK
$40 obo*1 YEAR OLD* *Great Condition*Manual Reel Lawn Mower (Scotts Classic)Email Kimberly at: lakekeystone717@gmail.com or call at 899-2190.Thank you! Location: Jenks, OKits NOT ok to contact this poster with services or other commercial interests
Proformax 22/44 surface drum sander - $1250 (Tulsa)
Tulsa
Have a Proformax 22/44 drum sander in excellent condition. $1250.00 OBO..................Variable Power feed and roll-around stand. Retails for over $2500. also have rolls of proformax sand paper with the machine. Call cell 918-671-5301 Location: Tulsaits NOT ok to contact this poster with services or other commercial interests
This is a Grizzly G1182 6\" x 47\" heavy duty Jointer on a Shop Fox base with wheels, it features cast iron construction for rigidity and strength, solid cast iron fence, steel cabinet with built-in chip chute, 1/2\" rabbeting capacity and convenient levers for raising and lowering the infeed and outfeed tables. Also included are a guard and complete electrical package consisting of a 3450 rpm 1 hp capacitor start motor, safety toggle switch and cord set. All running parts use shielded ball bearings, which require no lubrication for the life of the bearings. This jointer belonged to my father who loved woodworking and kept all his tools in \"like new\" condition. He had used it for less than 2 years before his untimely death. This unit must be picked up in Broken Arrow, OK. Location: Broken Arrowits NOT ok to contact this poster with services or other commercial interests
Want to Buy Wood work Vise (Tulsa)
Tulsa
Im looking to buy a woodworking workbench vise. Can be old or new. Something like what is shown below. Let me know what you have. Thanks. Location: Tulsaits NOT ok to contact this poster with services or other commercial interests
This table saw is a Grizzly G1022SM 10\" heavy duty unit featuring ball bearing arbors on a worm gear mechanism, sheet metal extension wings, sturdy steel stand, standard and dado inserts, standard rip fence, standard miter gauge, 1-1-2 hp 110 volt motor with body mounted switch on a Shop Fox base with wheels and weighs about 240 pounds. This saw belonged to my father who loved woodworking and kept all his tools in \"like new\" condition. He had used it for less than 2 years before his untimely death. This unit must be picked up in Broken Arrow, OK. Location: Broken Arrowits NOT ok to contact this poster with services or other commercial interests
Quincy model 350 2 stage air compressors.$3250. Quincy model 340 2 stage air compressors. $2600 918-497-8125 or 918-885-2991. Location: Hominy Oklahomaits NOT ok to contact this poster with services or other commercial interests
Sullair model 1600Q compressor. Detroit Diesel with supercharger. make offer. 918-497-8125 or 918-885-2991. Location: Hominy Oklahomaits NOT ok to contact this poster with services or other commercial interests
Hyster Diesel Forklift. 8000lb lift capacity. Runs great and very reliable. 918-497-8125 or 918-885-2991. Location: Hominy Oklahomaits NOT ok to contact this poster with services or other commercial interests
2 cylinder diesel lister with hydraulic pump.Engine is 20hp and pump runs 17.9gpm. This machine has many uses. 918-*497-8125 or 918-885-2991. Location: Hominy Oklahomaits NOT ok to contact this poster with services or other commercial interests
Masonry Saw Blades - $110 (Tulsa)
Tulsa
Trying to get rid of 100 Supreme Turbo Segmented 14\"X 1\"-20 Masonry Blades. 12mm Segment Height.Each Masonry Saw Blade is $110.00. No limit on how many you want. BRAND NEW NEVER USED STILL IN BOXES.Over ordered too many. If out of state we will accept cashiers checks otherwise contatct me if interested.First come First serve NO HOLD.Email me at jaketay01@yahoo.com Location: Tulsaits NOT ok to contact this poster with services or other commercial interests
Wagner Paint Roller and Sprayer - $75 (Tulsa)
Tulsa
I have a new power roller and a sprayer from wagner both new. also a straight line level its new. All for 75.00 call 895-6202 or cell 256-276-3675 Location: Tulsaits NOT ok to contact this poster with services or other commercial interests
Miller 22A wire feeders reconditioned with new Bernard Q Guns 918-245-7780its NOT ok to contact this poster with services or other commercial interests
Lincoln LN7 feeders Reconditioned look like new ,but less than 1/2 the price 918-245-7780its NOT ok to contact this poster with services or other commercial interests
Honda 3800 psi pressure washer by Troy Bilt - $900 (tulsa)
tulsa
I have a Honda 3800 psi pressure washer by Troy Bilt. I purchased it FOR $1200 at Lowes about a year ago and Ive only used it once. It is pretty much brand new. Im asking $900 but the price is negotiable. Take a look, and if your interested make me an offer. You can reach me at 918-269-0883. Leave a message if nobody answers. Or email me at savecraze@yahoo.com Location: tulsaits NOT ok to contact this poster with services or other commercial interests
Thermal Dynamics 80XL plasma 1ph cuts 7/8 918-245-7780its NOT ok to contact this poster with services or other commercial interests
Cobramatic push/pull wire feeder watercooled very good cond 918-245-7780its NOT ok to contact this poster with services or other commercial interests
Large lot of used toolboxes, tool bags, extension cords. - $50 (Stonebluff)
Stonebluff
This is a large lot of toolboxes, tool bags, and extension cords. There are no tools in theses boxes. This would be great for resale at a flea market. You should be able to sell these individually for between $150.00 to $200.00 for all!! If interested, call Don @ 955-1739. Location: Stonebluffits NOT ok to contact this poster with services or other commercial interests
Wacker "jumping jack" compactor - $250 (Stonebluff)
Stonebluff
This is a jumping jack style compactor. It is made by WACKER. It needs work. Probably needs a coil. These compactors go for over $2,500.00 NEW!! My loss = your gain! If interested, call Don @ 955-1739. Location: Stonebluffits NOT ok to contact this poster with services or other commercial interests
Lincoln SAE 300 DIESEL Welder - $2000 (Gans,Ok)
Gans,Ok
Lincoln SAE-300 Diesel portable welder,new paint and all sheetmetal, runs great, welds well. Leads available.Ted Yenter 479-769-0725 Location: Gans,Okits NOT ok to contact this poster with services or other commercial interests
Hilti Fastener - $75 (Coweta)
Coweta
This is a like new Hilti DX E72 Powder actuator. Location: Cowetaits NOT ok to contact this poster with services or other commercial interests
Clipper C-13 walk behind concrete saw - $850 (Stonebluff)
Stonebluff
You are looking at a Clipper C-13 (by Norton) 13 h.p. walk-behind concrete saw. This saw is in very good or better condition. The blade can be mounted on either side of this saw. This saw sells for over $2,000.00 new. I have owned it for about 3 years, and I have never had any job that I needed to use it on. For that reason, I am selling it. I will accept $850.00 firm!! If you would like to see this saw, you can call Don @ 955-1739 and set-up a meeting. ****** This will take up to a 16\" blade!!!****** Location: Stonebluffits NOT ok to contact this poster with services or other commercial interests
HD ROTARY PHASE CONVERTER-RUN 3 PHASE INDUSTRIAL EQUIPMENT ON 220 VOLT HOME WIRING- SIMPLE WIRING HOOKUP- SCHEMATIC INCLUDED- CALL RAY @ 918-284-4121 OR 455-4492 Location: BROKEN ARROWits NOT ok to contact this poster with services or other commercial interests
100 feet Lincoln 2/o stick welding lead - $100 (Owasso)
Owasso
For sale- 100 feet of 2/o Lincoln stick welding lead. Lead is in good condition with some cracks in the insulation and some taped over areas. There are no splices and the insulation is in good shape and still flexible. Call or email Dewy 918 760 0091 Location: Owassoits NOT ok to contact this poster with services or other commercial interests
Two large chain style pipe wrenches - $50 (Owasso)
Owasso
Two large chain style pipe wrenches in good condition. Call or email Dewy 918 760 0091 Location: Owassoits NOT ok to contact this poster with services or other commercial interests
Dewalt 1/2 in Angle Drill - $75 (tulsa )
tulsa
Dewalt 1/2 in Angle Drill ... this is a heavy duty angle drill with 1/2 in chuck for those tight jobs. asking $75 firm.. please send your phone for mine Location: tulsa its NOT ok to contact this poster with services or other commercial interests
Robinair 4 CFM Vacuum Pump - $135 (tulsa )
tulsa
Robinair 4 CFM Vacuum Pump ... this is a heavy duty vacuum pump that works great. verified working good with a micron gauge. bargain priced at $135 firm... please send your phone for mine Location: tulsa its NOT ok to contact this poster with services or other commercial interests
Troy-bilt 3000psi Pressure Washer - $275 (Broken Arrow)
Broken Arrow
I have a nice used power washer / pressure washer. works great, it is 3000 psi which is very strong, it is a troy-bilt. E-mail any questions to me. Location: Broken Arrowits NOT ok to contact this poster with services or other commercial interests
Ive got three different hand saws here. Asking $7 for each saw or $15 for all 3.I delete items as they are sold, so if you are reading this then please assume I still have it.For payment I will accept cash, most gift cards / gift certificates and possibly trades of similar value. If offering a trade, please send photos and description. If offering a gift card, please includes details; value, store or restaurant, expiration date, etc.You may view all of my sale and wanted ads by searching keyword: miscmoney on the main page. Thanks.If interested, please reply via Craigslist email. I get my email on my phone and will reply promptly. Or if you want a call back, include your phone number. Location: Broken Arrowits NOT ok to contact this poster with services or other commercial interests
JABSCO 11810-0003 Flexible Impeller Pump Water Trash Electric - $200 (Broken Arrow)
Broken Arrow
Great Value for anyone who needs this pump or one similar to it. It works Great and we can demonstrate for you!Used a few times, other than that it has been in large toolbox in our garage. We purchased new at aprox $500.00 within the last year or so.We are asking $200.00, which is an excellent buy for this industrial brand high quality pump. We will consider offers and it will go to the best offer we feel is reasonable and fair if someone does not steal it here at the $200.00 price we are asking.Jabsco Flexible Impeller Pump 11810-Series - This is 11810-0003Application Ideal for General Liquid Transfer, Circulation and Processing, Filling and Circulating Machine Tool Coolants FunctionFill and Empty Drums, Vats, Tanks, Tractor Tires, Empty Silo Pits and Transfer Liquid Fertilizer Flow rate: up to 9.6 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 2.4m (7.8ft)• Easy to service and maintain.• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).• Handles hard and soft solids without clogging.• Non pulsating flow. Body Bronze Impeller Neoprene or Nitrile Seal Lip type Bearings Uses motor bearings Shaft Stainless steel stub shaft in impeller Port Type 1/2\" NPT Internal or 3/4\" GHT External Voltage 115 VAC Cycles 60 Hz Motor 1/3hp 1725rpm Weight 25 lb 11.4 kg Feel free to contact us through craigslist and leave us your phone number and we will reply with our phone number so you will know who is calling.Please serious buyers only. We have had many items on craigslist that either email or call and never show up or follow up. So make sure you are at least interested and understand that retail of this item is anywhere from $440.00 to $507.00 plus tax and shipping if bought online. You are welcome to look up the model number online to see the value of this pump. With all the rain in oklahoma, this is an asset to someone who may need it later even if they do not need it now.We also have a gas powered one that I have not listed yet and will today sometime. But this is the quality pump with great reviews, no problems, runs and works as it should without any issues.Pictures below shows a new one, then the original we have. Little or No difference in the one selling today and the one we purchased a year or so ago. The one we have, even though we only used it a few times, is a little dusty and shows signs of some cosmetic scratches from being used and stored in our toolbox and garage. We Guarantee everything we sell with a money back guarantee. You try it and you have 7 days to contact us if you are not fully satisfied. Return is based upon the item being in the same condition as when we sold it. If damaged because instructions are not followed or if it is abused, then that is on the buyer. Location: Broken Arrowits NOT ok to contact this poster with services or other commercial interests
As seen on TV adjustable Ladder - $100 (Broken Arrow)
Broken Arrow
Werner 16 foot Ladder For more information click link below: http://www.amazon.com/Werner-250-Pound-Multi-Master-Articulated-M1-8-16/dp/B00005JRK2 Come see this and more at my garage sale2504 S. 10th St. Broken ArrowWashington Lane additionToday from 8 to 3 Location: Broken Arrowits NOT ok to contact this poster with services or other commercial interests
Never used Hitachi air compressor EC119SA 4 gallon twin stack $150.00 (918)277-9745 Paul Location: Broken Arrowits NOT ok to contact this poster with services or other commercial interests
BE ON THE LOOK OUT FOR THESE TOOLS, STOLEN FROM A SHOP IN BARTLESVILLE OVER THE MEMORIAL DAY WEEKEND (FRIDAY NIGHT) MATCO DETERMINATOR SCAN TOOL ( JUST THE TOOL AND TWO CABLES, STUPID FORGOT TO NAB THE CASE AND SOFTWARE) BLUE POINT MT 586 ORANGE METER (JUST THE METER AND LEADS, STUPID FORGOT TO NAB THE CASE WITH ALL THE ACCESSORIES) (ALSO, THIS METER HAS MY NAME ON THE BACK OF IT, IF YOU PEEL THE COVER OFF) FLUKE MULTIMETER (YELLOW CASE) BLACK SCHUMACHER ROLLER BATTERY CHARGER - LIKE NEW VARIOUS HAND WRENCHES, PITTSBURG, SNAP ON, MATCO, MAC, CRAFTSMAN, ALL ASSORTED, MOSTLY LONG WRENCHES (STUPID EVEN TOOK SOME BROKEN ONES) MAC TORQUE WRENCHMATCO CHROME TIMING LIGHT WITH ADJUSTABLE ADVANCE IN CASE DeWALT 9.6V DRILL WITH BATTERY (STUPID LEFT THE OTHER BATTERY AND CHARGER BEHIND) (3) IMPACTS, ONE 1/2 DRIVE INGERSOL CLASSIC, ONE 1/2 DRIVE PLASTIC INGERSOL, ONE 3/8 SNAP ON (WELL WORN) SNAP ON SOCKETS, 3/8 DEEP SIX PT METRIC, SOME HAVE A \"W\" ENGRAVED ON THE SIDE. PLASTIC SOCKET RAILS WITH SOCKETS, ASSORTED,AND STEEL SOCKET RAILS WITH HEX BITS, TORX BITS, ETC. THIS AND OTHER THINGS WERE NABBED IN A COUPLE OF 5 GALLON BUCKETS, AND A HAND TOOL BOX, ( AN INEXPENSIVE BLACK & DECKER) EMAIL ME BACK, I WANT THE THINGS BACK, COULD CARE LESS ABOUT HELPING THE COPS, BECAUSE THEY DONT CARE, UNLESS THEY ARE \"RAISING THE BAR OF JUSTICE AGAINST ONE OF THEIR OWN...\" THANKS Location: BARTLESVILLEits NOT ok to contact this poster with services or other commercial interests
UST 5500 GENERATOR - $450 (TULSA )
TULSA
this generator is almost brand new , we used it only when the ice storm hit, two years ago , never used it since, pepboys sells it for 599.00, thats were we bought it, please call me at 918-810-2928 Location: TULSA its NOT ok to contact this poster with services or other commercial interests
I have two of these fans that were used last Summer on a construction project. They are absolute life savers and move a lot of air, Location: Tahlequah, OKits NOT ok to contact this poster with services or other commercial interests
Forklift Tires (Installed)
tulsa
Full Service Wholesale Forklift Tire dealer~ Mobile service to your location - All Major Brands - Solideal - Pro-Tire - Maine - We have most sizes in stock and ready for installation. Our prices are the lowest in Tulsa and probably all of Oklahoma. Let us quote for you and you will see. Call everybody and then call us, be sure to ask for the brand of tires you are being quoted. We are fully insured. Call 918-906-2460its NOT ok to contact this poster with services or other commercial interests
36v Battery Charger 25amps - $75 (tulsa )
tulsa
36v Battery Charger 25amps ... this is an old Cushman 36v 25amp lead acid battery charger. this is an industrial duty charger that can charge any 36v lead acid battery system. leads fits Cushman Carts, but can be easily changed to fit most any 36v electric vehicle. weights 39lbs so please dont mistake this for a lessor built charger. these are heavy duty and built with solid copper to last. asking $75 firm... please send your phone for mine. Location: tulsa its NOT ok to contact this poster with services or other commercial interests
Onan 3500 watts - $250 (Catoosa)
Catoosa
This is an Onan generator. A really good brand. If u know anything about Onan you know this is a great generator. just needs a fuel tank. Call or text anytime Greg 918-851-8853 Location: Catoosaits NOT ok to contact this poster with services or other commercial interests
Craftsman table saw cast Iron top - $80 (owasso ok)
owasso ok
Craftsman table saw cast Iron top heavy duty its about 40years old my dad had it ...the motor probaly needs to be replace it runs ok call 918-671-8356 Location: owasso okits NOT ok to contact this poster with services or other commercial interests
SEMI TRUCK TIRE CHAIN NEW!!! - $125 (Tulsa)
Tulsa
Semi truck tire chain, BRAND NEW!!! never used, I have 5 pairs. All yours for $125. If you have any questions or interested in buying call (918) 407-6542 Location: Tulsaits NOT ok to contact this poster with services or other commercial interests
10 Ton Iron Worker - $1250 (N OKC)
N OKC
Bateman Bantam. Works great, could use a bit of polish, I suppose. Cuts 2\" angle, 5\" plate (Im guessing 3/16\") and has a punch station. Will come with 2 die holders and uses 1\" punches. On casters. 120v, single phase. $1250 obo, might trade on machinery, etc. Please call Ron @ 405-630-8803 Location: N OKCits NOT ok to contact this poster with services or other commercial interests
Like new Case 60 Trencher - $4950 (Joplin MO)
Joplin MO
This unit has had a $6300 full upgrade by Case in Euless, TX including a center lifting ring, new steel cover, new engine, and all new drive components. Has 6\" trenching blades. Case invoices on this work available. Zero hours on engine. Has not been used since the upgrades. Original cost, $9500. Location: Joplin MOits NOT ok to contact this poster with services or other commercial interests
Huge Port-A-Cool (Made in USA) 73\" wide x 76\" tall x 36\" deep. Comes with approx. 10\" high 4 wheel dolly. Huge reservoir and can also attach a garden hose to it. 2 yrs. old. Only used for one summer. I sold my shop and it has been stored for the last year. This Port-A-Cool actually reduced the temperature in my 3600 sq ft shop w/ 20 ft ceiling by 20 degrees. Awesome piece of equipment for those HOT days. Originally paid 4200.00.Any questions please call Mike @ 916-289-3061 or Paul @ 417-623-3465 Location: Joplin, MOits NOT ok to contact this poster with services or other commercial interests
Salisbury voltage detector tetster - $200 (Tahlequah)
Tahlequah
Salibury model 4244 high voltage detector/tester. This unit has both an audible and visual alert. This unit was used only a couple times and looks and performs like brand new. Here is the link to the website with all the details www.whsalisbury.com/voltage/images/voltagedetectors.pdf . These units sell for around $ 600.00 .... very pricey ! check em on the web and ebay and you will find them listed for this price. You electricians, you guys know what these cost! comes with the plastic case and attatchment shown. Asking $200.00 or best offer. Email or call 918 207 8185 Location: Tahlequahits NOT ok to contact this poster with services or other commercial interests
pipe clamp - $10 (ba)
ba
visegrip brand pipe clamp. Location: baits NOT ok to contact this poster with services or other commercial interests