I have about 40 sheets of 3003-H14 Perforated Aluminum. Each sheet is 44\" x 94\" x .050\" with 3/32\" holes on 5/32\" staggered centers. Each sheet is about 28.72 sq ft. I sold quite a bit of this material on eBay cut to smaller sizes, but need to sell the rest of this material as whole sheets.Perforated aluminum has literally 1,000s of uses around the farm/ranch, in custom or race cars, electronics enclosures, artistic endeavors - just too many possible applications to list! It is easily cut with common woodworking or metalworking tools, and it is easy to bend or roll to your needs. Thicknesses under .050\" are sometimes too flimsy and over .050\" tends to get too stiff to work without specialized tools.These sheets wholesale for $50-80 per sheet, depending on volume, and small quantities/sizes can sell for over $12/sq ft. Im sacrificing for $35 per sheet for quick sale.Please reply to this posting with the best way to reach you both day and evening. I usually check my messages first thing in the morning and again in the evening when I get home. I do not have internet access where I work, so please be patient - I will reply to all inquiries. Pick up in Altus just off N. Main & Bradford.Thank you! Location: Altusits NOT ok to contact this poster with services or other commercial interests

I have about 50 sheets of 3003-H14 Perforated Aluminum. Each sheet is 44\" x 94\" x .050\" with 3/32\" holes on 5/32\" staggered centers. Each sheet is about 28.72 sq ft. I sold quite a bit of this material on eBay cut to smaller sizes, but need to sell the rest of this material as whole sheets.Perforated aluminum has literally 1,000s of uses around the farm/ranch, in custom or race cars, electronics enclosures, artistic endeavors - just too many possible applications to list! It is easily cut with common woodworking or metalworking tools, and it is easy to bend or roll to your needs. Thicknesses under .050\" are sometimes too flimsy and over .050\" tends to get too stiff to work without specialized tools.These sheets wholesale for $50-80 per sheet, depending on volume, and small quantities/sizes can sell for over $12/sq ft. Im sacrificing for $25 per sheet for quick sale.Please reply to this posting with the best way to reach you both day and evening. I usually check my messages first thing in the morning and again in the evening when I get home. I do not have internet access where I work, so please be patient - I will reply to all inquiries. Pick up in Altus just off N. Main & Bradford.Thank you! Location: Altusits NOT ok to contact this poster with services or other commercial interests

12\" anchor stones. I have 30 of them. Selling them for 1.25 each, paid $2 for them. all in great condition have never been in the ground. I just bought too many and lost my receipt to return them. 574-0810 Location: Lawtonits NOT ok to contact this poster with services or other commercial interests

NEW WROUGHT IRON FENCE MATERIALS!Tired of paying high price for your iron fence? Our Panels are galvanized, welded and then powder coated with a 4 MM powder coat and UV protection to help resist fading! We can help create a pool barrier, dog run, hand rail or perimeter fence. Our current inventory includes:Flat top fencing from 32” to 70” Picket fencing from 46” to 70” Press picket fencing from 46” to 70”Corresponding gatesHardwareCapsHingesBase plates and collarsPostsMounting bracketsPanels start as low at $56.00 for a 3ft tall panel!All panels are 8ft long!Email sales@txfencesuppy.com with your dimensions and we can supply you with a quote to install or for just materials! We run four crews and can get you in our schedule in about a week. Location: Oklahoma Cityits NOT ok to contact this poster with services or other commercial interests

roll of 1 1/4 gas pipe Location: fletcherits NOT ok to contact this poster with services or other commercial interests

Location: Lawtonits NOT ok to contact this poster with services or other commercial interests

FOR SALE!!!Black wrought iron powder coated fence panels!4mm Powder coatUV PROTECTION TO HELP REDUCE FADINGWe stock Flat Top, Picket, and Pressed Point Fencing from 36\" to 70\"! Currently expanding from the Dallas area up thru Oklahoma!Fencing makes a great dog run, pool barrier, handrail, or perimeter fence!Email sales@txfencesupply.com for prices or a quote! Location: Lawtonits NOT ok to contact this poster with services or other commercial interests

We are located West of Villa on Main (just over the railroad tracks). Just north of Reno Ave. There is maple and oak.Many not pictured. Bun Feet, Queen anne feet, 30\"ish table legs or cabinet corners.$10 and up. Location: Villa and Mainits NOT ok to contact this poster with services or other commercial interests

Best offers will be taken. Come make an offer. We are located West of Villa on Main (just over the railroad tracks). Just north of Reno Ave. Many lengths and styles available. (8, 10, 12,... 8\", 10\", 12\" ect in fiberglass, 6\"x6\"x10s, 6\"x6\"x8 ect in woods.) Location: Villa and Mainits NOT ok to contact this poster with services or other commercial interests

Best offers will be taken. Come make an offer. We are located West of Villa on Main (just over the railroad tracks). Just north of Reno Ave. Many finishes available.$5 Each OBO.Great for inside stairs or deck outside. Location: Villa and Mainits NOT ok to contact this poster with services or other commercial interests

We are located West of Villa on Main (just over the railroad tracks). Just north of Reno Ave. There is alder, maple, oak, beach, walnut, hickory, mixtures of it all. Most are 12\" square to 20\" square or rectangle. All are about 2\" thick.If you want a custom size chopping block, we make them. An example of cost for a maple chopping block 3 foot by 4 foot is $350. Location: Villa and Mainits NOT ok to contact this poster with services or other commercial interests

Best offers will be taken. Come make an offer. We are located West of Villa on Main (just over the railroad tracks). Just north of Reno Ave. There is alder, maple, oak, beach, ect. Location: Main and Villaits NOT ok to contact this poster with services or other commercial interests

Double Garage - 22 x 26 x 8/9x7 Garage Doors (2). 14 gauge metal frame, 29 gauge roof and wall materials, does not include concrete, many colors and sizes available other than shown subject to taxes on your site. 4300.00 call 918-855-4320. ThomasI can provide the concrete, requires site inspection before bid approx 5.00 a square ft. 22X26X8 Garage4300.00Lawton/Oklahoma

12x21X7 Steel Garage, $2300.00. I also have many types and styles of carports, garages and barns long as the eye can see! Prices include installation and delivery on your site subject to tax. 18x21x5 Reg. style carport $795, 18x21x7 garage with 8x7 overhead door, 1 36-inch walk in door only, $2680.00. 20x21x7 with 2 overhead doors 8x7,and 1- 36” walk in door, $3,350. 24x31x7 with 2 overhead doors, and 1- 34” walk in door, $5,000. 36x31x12 3Tiered-horse barns $7,500 to order call 918-855-4320 ask For Thomas!! Don’t forget mobile home anchors only 30.00 each. Additional corner braces 15.00 each 2’ long. Our buildings come standard with braces in the peak 12 X 21 Single Garage2300.00 Lawton/Oklahoma

Boat Cover 12x21 installed and delivered 695.00 plus tax on your site. Many different sizes and colors, we can make them short or tall to accommodate your Bass Boat to your Pontoon Boat I can even install one on your dock for shade and protection. Call for more details 918-855-4320 Thomas Johnson Authorized dealer. 12x21 Custom Boat Cover690.00Lawton/Oklahoma

8X12 Portable building with full loft, sealed and stained, 30 yr rated roof, delivery and setup free in the state of Oklahoma. Price subject to tax at your site. Call 918-855-4320 or 918-224-4334 or toll free 1-877-305-4334, many styles and sizes available.100 dollar deposit plus 1st months payment delivers. Financed or Cash No Credit Check!Paint optional 5% extra, double door 55.00 more. 8X12 Storage Building (Financed or Cash)1860.00Lawton/Oklahoma