Tire changer, not sure of brand. Bought automotive shop building and have no use for some of the equipment. Will consider all reasonable offers. Contact Brad 575-602-1268 Location: Hobbs, NMits NOT ok to contact this poster with services or other commercial interests

Robinair air conditioning machines. One is an R12, the other R134. Price is for the pair, but will sell separately. Bought automotive shop building and have no use for some of the equipment. Will consider all reasonable offers. Contact Brad 575-602-1268 Location: Hobbs, NMits NOT ok to contact this poster with services or other commercial interests

wheels off 08 chevy truck. 6 lug- also same bolt pattern as toyota, nissan, and some mazda trucks. I dont have the center caps, cash only- call 575-706-6137 Location: cbadits NOT ok to contact this poster with services or other commercial interests

axle out of a 73 blazer that got t-boned at the rear axle. need to sell axle for 150 and the tranny/ t case for 200. cash only, 575-706-6137 Location: carlsbadits NOT ok to contact this poster with services or other commercial interests

up for sale is a brand new set of american racing 6lug wheels they are outlaw 2 wheels asking $300.00 or best offer call (575)309-5477 Location: clovis nmits NOT ok to contact this poster with services or other commercial interests

Like new! This truck utility bed was only six months old when taken off the original vehicle. Orignal purchas price was $5435. There are no known problems with the bed and features a total length of the 8 including a 6 box and 2 compartment at the head. The bed should fit any other standard 8 bed trucks. Location: Ruidosoits NOT ok to contact this poster with services or other commercial interests

I have an edelbrock 750CFM Carb. It was only used for 2 months before the engine gave up the ghost. I bought it for $500 will sell for $350. 625-8644 Kevin Location: Roswell,Nmits NOT ok to contact this poster with services or other commercial interests

Off a 2003 Double Cab Tacoma, call 864 363 5219 or email for questions. Location: Artesia/Clovisits NOT ok to contact this poster with services or other commercial interests

i have a set of 285x75x17\" bfg mts about 60% tread $300 for 4 of em.also a set of 35x12.5x17\" baja claws on 04-09 17\"ford rims.rims are scratched and no hubcaps,tires are about 20-30%.rims and tires no parting out!$375call 706 1884 after 3 pm ask for samor email me @ rockcrawler@valornet.comcan get pics of bfgs for serious buyers! Location: carlsbadits NOT ok to contact this poster with services or other commercial interests

I have a 13gpm, 12 volt transfer pump with hose and nozzle. Barley used. Fill-rite. New is $300, I will take $200 for it.I have a 50 gallon 24\"x24\"x24\" White Transfer fuel tank. Barley used. New is over $400, I will take $300 for it.I will sell combo for $400I am in Las Vegas, NV, but I can bring to Roswell as I am there often. I have had it in my garage for a few months now. It had Diesel In it when I used it 3 times. Location: Roswell/Dexterits NOT ok to contact this poster with services or other commercial interests

2 Tires 215/60-R16, $ 60.00 both or better offer, about 80% of tread on tires if interested please call 575-624-8849 Location: Roswellits NOT ok to contact this poster with services or other commercial interests

selling bed only. no rust at all. no dents except at bottom - need it out of my yard cash only- 575-706-6137 Location: carlsbadits NOT ok to contact this poster with services or other commercial interests

cash only, daniel- 575-706-6137 Location: carlsbadits NOT ok to contact this poster with services or other commercial interests

this axle is out of a 73 chevy blazer- has everything out to brakes and in good working order. cash only call 575 706-6137 -Daniel Location: carlsbadits NOT ok to contact this poster with services or other commercial interests

I have a Remanned Dodge 46re Transmission that i would like to sell. It comes with the torque converter also. This transmission will work with the 5.9 magnum engine in the durango, dakota, and dodge ram. It is for a 4x4 vehicle. Location: Roswell NMits NOT ok to contact this poster with services or other commercial interests

selling 20 inch wheels small five hole car wheels universal they fit 1994 cadillac and small pontiac pattern wheels also have plastic inserts call 5752260452 or 5757494808 Location: portales nmits NOT ok to contact this poster with services or other commercial interests

NICE RIMS ONLY 375 for all!!! Location: Capitanits NOT ok to contact this poster with services or other commercial interests

i Just bought some nice rims for my truck im selling my old stock rims Location: Capitanits NOT ok to contact this poster with services or other commercial interests

18 alloy rimms are in really nice condition. I am also selling them with fairly new tires. The tires have less than 5500 miles on them , they are in goodcondition. The alloy rimms are universal and will fit any car,sedan,and truck. Make me an offer and lets see what happens contact info is 575-706-9695 my name is Bradley Location: Carlsbadits NOT ok to contact this poster with services or other commercial interests

These were pulled off of my 97 ram longbed and are in very good condition.They will fit 94-01 dodge rams. I am selling locally only and asking $400 for both but e-mail me with an offer if interested. NEED TO SELL FAST SO MAKE ME AN OFFER! You may also contact me at (575) 703-5454 ask for Ty. Location: Artesia, NMits NOT ok to contact this poster with services or other commercial interests

This is a Chrysler MyGig (RER) Navigation touch screen, voice activated, Sirius, UConnect, DVD, CD. Lowspeed model. This can work in most Chrysler, Jeep, or Dodge from 2005 up. This sale is for the MyGig only, no GPS antenna, no Sirius antenna. Email for further details or questions. Absolutely no scratches, like new. Location: Clovisits NOT ok to contact this poster with services or other commercial interests

b18 ls motorcp pistons 10 5 to 1eagle rodsall new bearingsmicro polished crankarp main studstyper oil pumpnew water pumpheadls headcrower valvescrower valves springs and titanium retainerscrower 403 camsmillednewhead gasketover 2,500 was invested in this motorselling at less then half thati do still have some of the reciptsmotor has less then 500 miles on itmotor is complete anddrop in ready with distributor and complete intak manifold with injectorsJesse317 4373 Location: roswellits NOT ok to contact this poster with services or other commercial interests

Wrangler MT/R 305 tires for sale. 30% tread left. Asking 100.00 each OBO. Please email for more pictures. or call 575-622-1949 Location: Roswellits NOT ok to contact this poster with services or other commercial interests

I have a slightly used edge programmer for a dodge 3/4 or 1 ton pickup. It will need a pyromitior to work right because it was damgaged in the wreck. If you want 6 way adjustment then you will also need to order the monitor, but it does have the three way switch. Everything is included with instructions and I am working in Hobbs,nm and dont mind meeting somewere close. You can call or text me if interested @405-385-1062 or email @ nofearman@hotmail.com (Also I will not Ship ANYWhere For Any amount of money dont ask).. HERE ARE THE SPECS:KEY FEATURES:• 6 on-the-fly adjustable power levels*• Up to an additional 100 HP*• Increase torque up to 250 ft. lbs.*• Includes Turbo Timer• Retrieves and clears trouble codes• Displays transmission temp• Displays true speed (by taking into account changes in tire size)• Adjustable low-end responsiveness• Provides cold engine protection• Automatic defueling for excessive EGT, turbo boost, and transmission slippage• User-selectable audible alerts for EGT, speed, boost, transmission temperature, engine coolant temperature, and DPF (Diesel Particulate Filter) regeneration• Replaces traditional gauges by displaying transmission temperature, engine temperature, MPH, throttle percentage, load percentage, backdown percentage, DPF regeneration status, barometric pressure, gear, and torque converter status• Performance testing: Captures 0-60 and quarter-mile performance tests* Note: Hot unlock code required for level 6 (100HP and 250 ft. lbs. of torque). Call for details.The Edge Juice with Attitude is a highly sophisticated package capable of dramatically improving your trucks driveability, towing, mileage and, most importantly, POWER.Using factory-style connections, in just 30 minutes you can add up to six levels of adjustable power ranging from 25-100 horsepower and increase torque up to 250 ft. lbs. The Juice greatly improves responsiveness and driveability, while at the same time increasing fuel economy*. The Juice communicates along the engines CAN-BUS data stream, from which it receives vital engine, transmission, and fuel system information. This enables the Juice to provide smooth and precise power curves that are truly custom, rather than just an offset from stock.When used in conjunction with the Attitude monitor you can control the power levels on-the-fly from inside your truck. The Attitude displays all the information a complete set of gauges would and automatically monitors and displays exhaust gas temperature (EGT), turbo boost, and transmission slip. Its precise electronics also protect your truck by automatically de-fueling the engine to prevent excessive EGT, boost levels, or transmission slippage. It also captures and displays 0 – 60 times, quarter-mile times, and actual speed if you are using non-stock tires, as well as a host of other parameters. The Juice communicates directly with the engines ECM, from which it receives vital engine and fuel system information. This enables the Juice to provide smooth and precise power in real time under any driving condition.The Turbo Timer is the latest in a long list of Edge safeguards. This feature prolongs turbo life by allowing the truck to run after shut-off for a predetermined time or until a specific EGT is reached.Imagine, within minutes you get incredible power gains, an increase in mileage, and the equivalent of a complete set of gauges with one simple installation!The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Juice with Attitude module. Power gains may vary based on vehicle and geographical location.Level 0: Stock Level 1: 25 Horsepower - 70 Foot Pounds of Torque Level 2: 40 Horsepower - 90 Foot Pounds of Torque Level 3: 50 Horsepower - 120 Foot Pounds of Torque Level 4: 65 Horsepower - 160 Foot Pounds of Torque Level 5: 80 Horsepower - 200 Foot Pounds of Torque Level 6: 100 Horsepower – 250 Foot Pounds of Torque**Your Attitude monitor allows you to monitor the performance of your engines vital engine components and output values. The following parameters can be displayed on the main Attitude screen (maximum 4 at one time):• Boost• EGT• Barametric PSI• Power Level• Speed MPH• Engine Coolant Temperature• Gear• Intake Air Temperature• Load%• Transmission Temperature• RPM• Percent Backdown due to high EGT or BoostThe Attitude can sound an alert when certain engine parameter levels are met. The following alerts are available:• EGT• Boost• Engine Coolant Temp• Transmission Temp• SpeedKeep track of your performance by recording maximum/minimum for a variety of parameters including:• 0-60 times• ¼ mile times• Max RPM• Max speed• Engine temp• Transmission temp*Increase in fuel efficiency varies based on driving style.**To get the unlock code you must complete a waiver and pay an additional fee. Both the waiver and pricing information are located under product updates. Legal in California only for racing vehicles which may never be used upon a highway.Note: The Juice with Attitude for the 6.7L Dodge Cummins is designed specifically for a standard truck platform and does not work on the chassis cab version. Location: Hobbs,nmits NOT ok to contact this poster with services or other commercial interests

1983 GMC 1 Ton truck for parts. No motor or Transmission. Full frame and cab. No bed. Was longbed. Interior good and wiring in place. Good for fenders, cab, frame, 4-11 rearend. No title. Also for sale, 1980 Chevy short-wide bed truck. Missing motor. Has transmission and rally wheels. Has 1982 front clip but missing hood. This one has a title. Will take $500 each or you can take both trucks for $800. Can send pics of 80 if interested. call 575-626-8946 Location: Roswell, New Mexicoits NOT ok to contact this poster with services or other commercial interests

I have a ton of auto parts to sell. Cheaper than anywhere else. Please buy local. auto parts and accessories Location:its NOT ok to contact this poster with services or other commercial interestsPostingID: 1014887129

The camper shell came off a 96 Chevy, 1/2 ton, short bed but it could fit an older model. It measures 6 ft long, about 70 inches wide, and about 20 inches high. If interested please call 575-752-1100 -cash or cashiers check only. It is in excellent condition and has brake light. $250 OBO. Location: Hagermanits NOT ok to contact this poster with services or other commercial interests

nighthawk 1982. with cb750 engine 4 carbs newly rebuilt. needs a little more work make an offer. willing to make trade for a 4 wheeler- atv. give me a call or email. 5753174194 Location: roswellits NOT ok to contact this poster with services or other commercial interests

Very good looking 18 alloy wheels.They are also universal. They will fit any small car or sedan. The tires are fairly new with7500 mile on them. Make me an offer and lets see what happens. Contact info is 575-706-9695 Location: Carlsbadits NOT ok to contact this poster with services or other commercial interests

For sale a set of new in box 4007 std Perfect Circle piston rings. These will fit the 4 cyl F or L head 134 Willys engine.I will ship priority mail US for this price.contact me larryd@cnetco.com Location: Gallup NMits NOT ok to contact this poster with services or other commercial interests

Four mobile home rims. These are 14.5 inch. Fifty bucks takes them all, that would be a great deal for DUBs, but not a bad deal for steels.Please email me with any questions or any offer. Located near Hobbs NM.

Roll bar fits 1990 S10 pickup and probably any light duty truck. This roll bar is well made and in great shape. The truck is a rust bucket but the roll bar is in not. Like any aftermarket roll bar is has a \"Show bar only...\" warning sticker on it but one look at the diagonal bracing lets you know its tough.Please email me with any questions or any offer. Located near Hobbs NM.

I was told this is a 4.3 liter Chevy S10 engine, I have not confirmed that it is. It is sold as a core only. I think it has spent time outside uncovered and it is stuck.Please email me with any questions or any offer.Located near Hobbs NM.

Baja style tube front and rear bumpes are on a 1990 S10 pickup. It will probably fit a Ford Ranger or any light duty pickup. Looks great, needs fresh paint.Please email me with any questions or any offer.Located near Hobbs NM.

If you are looking for a part for a nissan or infiniti youve come to the right place I stock over 8,000 parts new and used and they are ready to ship to you so give me a call at 1- eight hundred - seven one three - three nine nine nine to order. We take any credit card.

4 complete 16\" stock wheels and tires includes lug nuts and center caps. 6 hole on 5.5 centers. Will fit 2wd or 4wd Chevy or GMC trucks or SUVs. Tires are still good. Call 575-885-6096

Tailgate for 2007 Ford F250. Wedgewood blue. Excellent condition. Replaced tailgate to pull 5th wheel. Cell 479 633-1599 Located between Artesia and Carlsbad