HILTI TE-5 SDS PLUS ROTARY HAMMER DRILL – includes 5 bits & Hilti Case – only $150! - Hi quality drill in good condition, works great, all items guaranteed or money back – come check it out! – HAPPY HOCKER PAWN – 3715 Montgomery Blvd NE (corner of Montgomery & Carlisle) – call 883-4114 for questions – Thanks!If you are looking for a quality tool that you can use for any application that requires small to medium diameter holes to be drilled into the concrete, this is absolutely the tool for you. The tool comes standard with an SDS chuck and takes bits from 3/16\" up to 1\" in diameter. It will do its best drilling from about 1/4\" to 1/2\". The tool is 500 watts, 115 volts, and strikes at an amazing 4000 blows per minute in its highest speed …. Bottom line, if you looking for a small hammer drill, look no further than the Hilti TE-5. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Tools to sell:Craftsman 18.5\" heavy duty drill press - $300 or best offer.Router table w/ router (foot pedal power attachment) and bit set - $125 or best offer.2-Wheel grinder station - $30.Call 268-6395 after 9 a.m. Saturday, 6/13 for directions or additional information. Location: Albuquerque - near NE Heightsits NOT ok to contact this poster with services or other commercial interests

This bends and inserts steel strapping bands to secure items. This was my Fathers so I dont know a lot about it. Cash only! Location: Far NE Heightsits NOT ok to contact this poster with services or other commercial interests

This thing is loaded with tools but I just dont need it any longer. It has sockets, ratchets, screw drivers, allen wrenches, screws/bolts, three oil filter wrenches and so on. There are some made in the USA, Taiwan and Japan. Metric and Standard sockets. Ive thrown a few more things since the pictures were taken. The tool box was $30 by itself at Home Depot! I just have too much stuff and need to lighten the load! Cash only! Location: Far NE Heightsits NOT ok to contact this poster with services or other commercial interests

This is a model 866 12 volt drill, with model 8623 battery. Its a good tool.My garage was broken into and the case and charger were stolen, so Im selling this drill.Chargers are available on Ebay and the internet. Location: Far NE Heightsits NOT ok to contact this poster with services or other commercial interests

The mower works fine. I am only selling it because I need a mower with a bag. 710-0661 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Electric concrete mixer three 80 lb. bag capacity. One year old, hardly used and in good working condition. Location: Far NE Heightsits NOT ok to contact this poster with services or other commercial interests

I have a set of three Greenlee Conduit Cutters size 1 inch, 1 1/2 inch and 2 inches. These cost $100+ each new but will sell the whole set for $65 because I dont need them any longer. Cash only! See the ad below for one piece!http://www.toolup.com/greenlee/7211bb-1-1/2.html?adcamp=ca&utm_source=cafroogle&utm_medium=ca&utm_term=greenlee+7211bb-1-1/2&cawelaid=317968333 Location: Far NE Heightsits NOT ok to contact this poster with services or other commercial interests

This is a monster paint hsaker capapble of shaking two gallons of paint at one time. It is heavy super duty and will have to be bolted down to something stout. Built to last forever. $1500.00 + new Todd 710-5842 Location: ne heightsits NOT ok to contact this poster with services or other commercial interests

This is a used leaf blower in good shape.It works fine and is powerful. It is NOT a vacumn, just a blower.Call 332.3304 after 6 PM if interested. Location: Far NE Heightsits NOT ok to contact this poster with services or other commercial interests

This is a sander used for smoothing odd shapes. Its been used maybe twice, and I really dont need it.It is useful for furniture sanding and perhaps for picture frames.Call 332.3304 after 6 PM if interested. Location: Far NE Heightsits NOT ok to contact this poster with services or other commercial interests

This is a model 866 12 volt drill, including 1 model 8623 battery. Its about 4 years old and works fine.Im selling it because my garage was broken into and some tools stolen, including the charger and case for this drill. Its a good tool and chargers can be found in various locations-Ebay, Amazon, etc.Call 332.3304 after 6 PM if interested. Location: Far NE Heightsits NOT ok to contact this poster with services or other commercial interests

Nail gun.

This sprayer is designed from the ground up for spraying concrete curing compounds, or release agents, sealers, liquid de-icers, and many semi-transparent stains. Viton® seals for maximum chemical resistance. BRAND NEW!! NEVER USED!!!Larger diameter fluid path from tank to nozzle allows spraying newer, thicker curing compounds and sealers, up to 30-35% solids. Heavy duty 4 US gallon polyethylene tank (3.5 gal useable capacity) Great for applying liquid de-icer, to melt snow and ice. Larger diameter brass supply tube. Larger diameter brass Thrustless control valve, wand and fittings. 48\" Goodyear Chemical resistant spray hose. Brass TeeJet FAn Nozzle TP8004E and TP11010E Built-in pressure release valve in filler lid. Not recommended for low volume applications, such as herbicides. HPP High performance pump with Metal D Handle Wide Funnel style mouth for easy filling If interested then please contact us at 270-6656

Three wheelbarrows, two different sizes. All working and in fair condition, not suited for cement mixing. $30 for all three. Please call 505-235-0437, and thanks for checking out my ad!