I have a Brand new in Box Axle Back ExhaustN1 Axle Back ..Chrome Finish..Never Installed..Minor ScratchesFits: 1992-1995 EG 2 Door Coupe or 4 Door Sedan..NOT 3 Door HATCHBACK Unless you want to modify yourselfNot to loud...very Mild Upgrade to a Stock/ Mildly Modified CivicVery Good Gas Mileage...Cleaner Burning fumes...Angle Slash Cut TipText/Call For any Questions..asking $90 obo...Frankie 505.615.5611 Location: I-40/Ne Heightsits NOT ok to contact this poster with services or other commercial interests

For sale Hood from a 1972 Blazer in great condition. Call Dave or Deb at 328-0861 or email anytime at nmhomesales@cs.com Location: Albuquerque NE Heights Tram & Menaulits NOT ok to contact this poster with services or other commercial interests

This Saginaw 4-speed has a Chevy bellhousing and I dont know too much about it. All the gears work. My name is Stevie and you can reach me at (505)453-2396. Call anytime. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I am selling an instrument cluster for a 96-00 Audi A4 with info display. I bought it for my Audi a while ago because some of the LEDs were going out, but I sold the car. I am letting this go for much cheaper than I bought it for. Im selling it as-is. Im asking $120obo. If you have any questions, feel free to e-mail me at jgreer@unm.edu or call/text me @ 908-7763. Please no Nigerian or European scammers. I know a scam when I see one. LOL. Thanks. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Sold WITHOUT motor or trans. Staright body. 3.42 gears and limited-slip. Rally II rims,leather bucket seats. Clean title. My name is Steve and you reach me at (505)974-3952. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Stuff that I have --Front and Rear cross drilled and slotted rotors-Front s14 hubs-Front 300zx 4 piston calipers (good condition)Also have-Front dual piston calipers from a Q45 (asking about $75)I only used the front setup for a test fitting. It works for sure on the S13 and S14 models. I do not have a 240sx anymore so i need these parts gone. hit me up if interested 505 328 6308 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

For Sale is an Ford 5.0 302 Aluminum GT40 Lower Intake manifold. It is very clean. No port work has been done. Fits all years of 289 and 302 Ford V-8 Engines, Direct Fit Applications include 1993 1994 1995 Mustang Cobra and 1996 - 2000 Ford Explorer. Use as a upgrade for the 1995 Mustang GT This intake was installed on a 1995 Mustang gt - There is a crack on one of the fuel rail mounts (See pic below) but it never gave me any problems. Call or text me 505-730-6354 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

For Sale Steeda Lower Control Arms which were on a 95 Mustang GT in Excellent Condition. Steedas Steel Lower Control Arms really hook, for the lowest 60 ft. times and maximum control off corners. They are a direct bolt-on, with swaybar mounts located to clear differential stud girdles and T-Rex fuel pumps. Dont be fooled by imitators! Steedas Aluminum lower rear control arms are the only ones that use our exclusive four part variable rate bushings to eliminate suspension bind and vibration while planting your tires to the pavement. These Lower control arms should fit Ford Mustangs 1979 to 1998.Call or text 505-730-6354 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Im selling this brushguard off my truck. I had it on a 93 Dodge Dakota, I dont know what else it could fit but Im sure with a little modification it would fit most small or midsize trucks. It comes with a set of Desert fox baja lights that have 55w bulbs in them. Also has a 2in reciever hitch set-up in the center for anything you want that can mount on a reciever hitch.Just needs a coat of paint. has one dent in one of the bars and a couple bends in the light protector bars. $100 O.B.O . Call Ash @ 453-8446 or email on the craigslist email address above. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

4 Alloy Wheels in very good shape with center caps, no lug nuts. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

2 wheels, had temp on TownCar, like new only used 6 months Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

Toyota Car Rims and Tires - Goodyear tire size 205/65/R15 with 5 hole Alloy Rim; Platinum Achilles Tire (ball on side of tire, not good) size 205/65/R15 with 5 hole Allow Rim; Toyo AO5 tire size 205/65/R15 with black 5 hole Spare Rim; and 5 hole Alloy Rim slight damage. Call 271-1456. Location: Alb - NE Heightsits NOT ok to contact this poster with services or other commercial interests

great condition, came as spares when i got my truck. 15 eagle rims. just need a little cleaning to look awesome!! Zach 249-7086Side step bars $50 for both Location: NE heightsits NOT ok to contact this poster with services or other commercial interests

off a 99 ram in good condition. painted flat black. call or text Zach @ 249-7086 Location: NE heightsits NOT ok to contact this poster with services or other commercial interests

For sale is one factory GM intake manifold. It fits big block motors with large rectangular port heads. Has mounting holes for square or speadbore carburators. This manifold has no provisions for EGR. It was orginally from a 1995 7.4L marine engine. Price is $40 obo, I just need it out of the garage. Call 505-307-3534 Location: ABQ NE heightsits NOT ok to contact this poster with services or other commercial interests

Up for sale are four stock aluminuim wheels for a 93-97 Mazda MX6.Size is 15\" X 6 1/2\"Five hole Bolt pattern : 5 x 114.345mm offsetThe wheels are in descent shape with no curb rash, although one is missing the small center cap. The wheels are straight and balance fine. They have worn 205/55/15 high performance tires mounted on them.Their a good set of wheels, but I need the space in the garage. The price is $20, just to get rid of them. Id also be willing to negothiate a trade if youve got a straight set of stock 16\" aluminium wheels from a 2000 or newer GM truck (6 lug). Call 505-307-3534 Location: ABQ NE Heightsits NOT ok to contact this poster with services or other commercial interests

I have a grill for a 2003 Hummer in great shape with a few minor scratches, this grille lists for 450.00. If interested call 263-8301 ask for Pete Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

1959 1960 2DR Hardtop impala Quater windows Drip rails in very good shape. Price $80.00. Email or call 505-400-9197 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I have a 1959 impala Tail fin moulding very slightly bent at the end but still in good shape. Price $20.00. Email or call 505-400-9197 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

Indmar thru transom high performance Big Block Chevy boat exhaust, elbows, downtubes, tips, and some hook up hose. (elbows not necessarly needed and not pictured)Replace those restrictive stock exhaust, with these great sounding, high flowing ones.Call 259-2163 or reply to add. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I am selling a used Taillamp for a 2007 Dodge ram Right hand it is in great condition, no scratches or cracks.If you are interested please call me at 505-515-8842 or E-Mail me at matt011606@hotmail.comThank you Matt Location: Ne heightsits NOT ok to contact this poster with services or other commercial interests

1959 1960 impala Rear interior windshield trims both for $60,001959 1960 impala interior side roof moulding both for $60.00They are very good shape. please email or call 505-400-9197 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

I have a procharger F1R off of a 70 Chevelle, This is intercooled with a Cog drive.Includes chrome 1 wire alternator, clamps,piping,and boots.It can easily be adapted to fit any BBC car or truck. Blower is in perfect shape.Call or text me at 505-307-1973Would trade for Big ATV Location: ne heights,tramway & lomasits NOT ok to contact this poster with services or other commercial interests

Cevy Avalanche brush guard, these are over 500.00 new. This can be painted any color with bumper paint, Thanks and it sticks out about 14\" from the bumper. I will consider trades Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Racing Full cell 16 gallon $100Racing GM Headers $100Sweet Spindles with aluminum cross shaft MO# 808100L Chevy 11382 $500 the right is a 11385R brand new never used Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Gambler 3 sage dry sump oil pump system complete from oil pump to tankincudes steel braded lines with fire sleeves 40T HTD pullyperterson 3 stage Scavenge manifoldpeterson oil adapterless than 10 races on itpeterson 90 degree remote oil filter adapterfirst $1500 takes it ... Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

2speed munsi lightenedTilton Bell Housing w/mini clutch set up $800 for whole set up will need clutche diskscall anytime 5059171691 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Ohlin Shocks set of 4 $1300 double adjustables remote resiviours 2 7in stroke MO # LM1550012 9in stroke Mo# 105720,. LMJ68000call anytime 5059171691Shocks only have 10 races on them. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I am selling an instrument cluster for a 96-00 Audi A4 with info display. I bought it for my Audi a while ago because some of the LEDs were going out, but I sold the car. I am letting this go for much cheaper than I bought it for. Im selling it as-is. Im asking $120obo. If you have any questions, feel free to e-mail me at jgreer@unm.edu or call/text me @ 908-7763. Thanks. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Pick-up truck bed cap for a long bed truck. It is the tall type, with plenty of room for cargo, camping, ATVs, etc. It has cab slider access, screened sliding side windows, dome light, and a locking lift up glass tailgate access. All glass is factory tinted. You will need to replace 1 small piece of glass that goes behind the drivers side, and the glass in the slider part. Otherwise, it is in great shape! It was on a 1996 Dodge 3/4 ton long bed truck. Should fit any long bed truck. $75 OBO. Email peakdm@swcp.com or Call 401-2442 Location: NE Heights Albuquerqueits NOT ok to contact this poster with services or other commercial interests

The hubcaps are off of my Ford F250 4X4. They are made to fit 16 inch rims and have a hole for the manual 4X4 switch on the front wheels. Call if interested and want to make an appointment. 505-332-3554 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Ford Mustang Headlights (left and right), just the headlights, no side markers or inner markers. Will fit any 87-93 Mustang $20oboComplete Mustang rear end from my 91 Mustang 5.0. In good working condition, needs trak-loc rebuild. Ford 8.8\" differential, 2.73 gears, posi, 9\" drum brakes, parking cables included. Complete drum to drum assembly. Also included is a set of brand new in the box, never opened, Duralast Brake Shoes. $100oboOriginal Ford Master Cylinder and Reservoir. From my 91 Mustang 5.0. $20oboA set of front calipers (driver and passenger) off a 87 Mark VII, they are 73mm calipers, includes brake hose, calipers/ bolts, and brake pads. Direct bolt on and great braking upgrade for any 79-93 Mustang. $75oboA set of OEM Ford front calipers off my 91 Mustang 5.0, both sides, in good working condition with brake lines, bolts, pads. $50oboOriginal OEM Hood, not perfect, small dent on front, no hood latch. White in color, will fit any 87-93 Mustang. $50oboSprings and Taillights... SOLD!Will sell any together for a package deal, make me an offer.All items sold as is, in good working conditioned when removed.Reply to email for more info. Thanks. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

NISSAN TITAN TRUCK /ARMADA FACTORY 18\"x8\" 6 LUG ALUMINUM ALLOY WHEELS. SILVER FINISH. $325.00 ALL 4. GOOD CONDITION. Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

04-08 ford f150 rear chrome bumper OEM. no brackets. have to use your own. good condition. $150.00 Thanks>>>>>> Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

TOW DOLLY WITH 2000LB HAND WINCH WELDED ON. LIGHTS WORK GOOD. 2 INCH BALL NEEDED. RAMPS AND STRAPS INCLUDED. ROBERT 385.5087 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

I have a set of 20\" Boss wheels and Tires for sale there in great condition, I bought a Chevy tahoe and the wheels and tires were already on it My wife didnt like the look so I put stock wheels on it instead . The tires are also in great condition lots of tread left ... asking 800.00 for wheels and tires.. No Low ballers or scammers.. cash or trade what do you have... Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

large turbo 200 2276299 Location: far ne heightsits NOT ok to contact this poster with services or other commercial interests

Old style detroit 6-71 blower, very good condition and turns freely. It is the large bore and I need the small bore. Open to offers. Nathan 974x1883 Location: ne heightsits NOT ok to contact this poster with services or other commercial interests

this was removed from a old bronco truck. I believe a late sixtys bronco. Iit measures 42 x 18 x 9 it appears to be customed made. text or call Collin 615-7409 Location: ne heightsits NOT ok to contact this poster with services or other commercial interests

Mechanic creeper by traders pro. Padded well and folds up for storage. 304-1509 Location: Ne Heightsits NOT ok to contact this poster with services or other commercial interests

1959 impala 2 dr or 4 dr hood latch in great shape. &30.00 please email or call 500-400-9197 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

Selling these cool brush guards. My wife didnt like them when they came on her RX330. I thought they looked pretty dang cool and set it apart from all the other RXs on the road. Let me know if you are interested an email me your number if you want a response. Too many scammers and losers on CL these days.... Peace! Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

2002 GMC 6.0 L LQ4. This is the engine out of the 2500 and 3500 gmc trucks, escalades, and denalli. engine is clean low mile original owner upgraded. Came from a running truck, not wrecked. Bought for my project car but economy and new child is forcing me to sell some toys. Perfect replacement for your 3/4 and 1ton chevy and gm trucks, or put in your project. The LQ4 is sought after because it is based of the current LS motor and will fit anywhere a 350 does. Very nice has almost all accessories, power steering, alternator water pump, fly wheel, it is complete from pan to intake. Very nice hate to sell but need some cash. Call with any questions. Mike 385-1795$1750 OR BEST OFFER!!!! CASH TALKS.... I only am selling due to Baby on the way, you can meet my wife... 38weeks prego.. These go for $1500 without the accessories, it is a great deal..It is the aluminum heads casting number 317Hit Counter Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

New vw seat covers for years 58 thru 76. They are a burnt red color. Scammers need not respond. 304-1509 Location: ne heightsits NOT ok to contact this poster with services or other commercial interests

These four wheels measure 15\" across and are marked J 14x5J DOT TOPY 1203 86 T 3.2. Email with an offer. Thanks. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Parts for all kinds of cars. Can paint the parts you need, hoods, bumpers, fenders you need to match your car. Todd 710-5842 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Lincoln alloy wheels, no dents, no scratches, with Lincoln hubcaps, all wheels are straight and drove smooth down the road.The tires are P255/70/R18, the are Michelin highway tires, 2 of the tires have 30% tread on them, the other 2 have about 50%.Call 505-249-0962, asking $299, please make offer.Will fit 04+ F150 and Lincoln Navigator Location: albuquerque, ne heightsits NOT ok to contact this poster with services or other commercial interests

Raider Vagabond fibreglass camper shell for Chevy/GMC short wide pickup from 87-98. Picture shows it on my 98 Chevy. Sliding windows on sides and front. Paint faded on top. $400 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

CAR DOLLY WITH 2000LB HAND WINCH. HAS RAMPS AND STRAPS. LIGHTS WORK. CALL ROBERT 385.5087 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

they are in perfect shape i just got better ones so they are of no use to me if your intrested please give me a call at 319-6947 thanks Location: ne heightsits NOT ok to contact this poster with services or other commercial interests

I am selling 4 used Kuhmo Road Venture Mud Terrain tires off of my Nissan Frontier. They are 265/75/16. They probably are at 50% or a little less tread. I bought a bigger size tire for my truck. They are currently dismounted and ready to go to a new home. I am asking $200 for the set. Please call Cameron at 505-610-9632 or email cmayer85@aol.com. Location: ne heightsits NOT ok to contact this poster with services or other commercial interests

Indmar high performance BBC thru hull boat exhaust. Including tips, elbows which you may need or not and some hook up hose (Elbows and hook up hose not pictured).Replace that restrictive stock thru hub exhaust with these and gain power and sound great.Thanks,Call 259-2163 or reply to add Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

89 BMW 525I car needs a head. Timing belt broke and it needs a head. The block is good, the transmission is good. Straight body. Has 18 in wheels $800.00 obo 299-8300 will not run Location: abq, ne heightsits NOT ok to contact this poster with services or other commercial interests

20x8.5 8-6.5 +10 KMC XD775 Rockstar rims & 35x12.50R20E2 121Q B Nitto Mud Grappler B Tires. Asking $1,250 OBO. Serious calls only. Call 505-681-8884 or 505-306-1429. Location: Albuquerque, NM NE Heightsits NOT ok to contact this poster with services or other commercial interests

Subaru bed extendercall jean 505-298-2400 9am - 9pm Location: ne heights uptownits NOT ok to contact this poster with services or other commercial interests

Mechanic creeper by traders pro. Padded well and folds up for storage. 304-1509 Location: Ne Heightsits NOT ok to contact this poster with services or other commercial interests

Parts for all kinds of cars. Can paint the parts you need, hoods, bumpers, fenders you need to match your car. Todd 710-5842 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

New vw seat covers for years 58 thru 76. They are a burnt red color. Scammers need not respond. 304-1509 Location: ne heightsits NOT ok to contact this poster with services or other commercial interests

BRAND NEW HONDA STOCK COMPLETE CLUTCH ASSEMBLY FOR 1989 HONDA PRELUDE 2.0 SICLUTCH ASSEMBLY IS BRAND NEW IN BOX! COMPLETE CLUTCH INCLUDES, PRESSURE PLATE, CLUTCH, & THROW OUT BEARING.$250 OBOCALL CHRIS 977-2077 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

I have lots of trim and molding left from my 1960 impala 2dr hardtop. Will also fit bel air and biscayne. Windshield front and rear trimroof railsrood moldingtrunk triminterior rear and front trims3 piece rear bumperdoor molding etcplease call or email for price. 505-400-9197I am selling everything in the picture. Make offerthanks Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

I have all 4 doors from a 1960 Chevy Bel air impala. All the doors still have all the windows, trims, door handle etc. I could also sell the door separatly for 40.00 each. please call 505-400-9197 Location: NE heightsits NOT ok to contact this poster with services or other commercial interests

For Sale:Set of (4) 16\" x 8\" Aluminum Wheels. These INCLUDE the center caps shown in the pictures. These wheels are from a 94 Trans Am but will fit any Camaro or Firebird (82-2002). Will also fit many Corvettes and some S10s or Sonomas, possibly other GM 5 bolt cars as well. These wheels are in good shape with normal wear (some light scratches). They come with a set of worn 245-50-16 Firestone Tires mounted on them.Backspacing: 6.875\"Bolt Pattern: 4.75\"Asking $200 OBO for the whole set. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

For Sale:Set of (4) 16\" x 8\" Aluminum Wheels. These wheels are from a 95 Trans Am but will fit any Camaro or Firebird (82-2002). Will also fit many Corvettes and some S10s or Sonomas, possibly other GM 5 bolt cars as well. These wheels are in good shape. One of them has a bit of curb rash on the outside of the rim but its not too bad. They come with a set of worn 245-50-16 Michelin Tires mounted on them. Backspacing: 6.875\"Bolt Pattern: 4.75\"Asking $200 OBO for the whole set. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

1997 TOYOTA SUPRA MIV FULL AUTOMOTIVE REPAIR MANUAL, THIS IS A COMPLETE REPAIR MANUAL FOR THE MIV SUPRA SHOWS ELECTRICAL DIAGRAMS, CHASSIS, AUTOBODY, & ENGINE! IF YOU OWN A MIV SUPRA THIS IS A MUST HAVE!!$75 OBOCALL CHRIS 977-2077 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

1993-1998 TOYOTA SUPRA MIV KOYO RADIATOR LIKE NEW FOR AUTO OR 6 SPEED. RADIATOR IS LIKE BRAND NEW AND HAS BEEN PRESSURE TESTED.SAME RADIATOR AT PERFORMANCE RADIATOR WILL COST ABOUT $165-$180!! SAVE OVER 50% OF THE COST OF A NEW ONE $60 OBOCALL CHRIS 977-2077 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

1993-1998 TOYOTA SUPRA STRUTS BRAND NEW WITH HEAVY DUTY COILOVER SPRINGS. 2 FRONT & 2 REAR STRUTS. SHOULD FIT ANY MIV SUPRA FROM 93-98SET OF 4 $130 OBOCALL CHRIS 977-2077 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

LIKE NEW TOYOTA MIV SUPRA HEADLIGHT ASSEMBLIES, NO YELLOWING!! OVER $800 AT TOYOTA DEALER, JUST $300 FOR THE PAIR!HAVE OTHER PARTS FOR MIV SUPRA!$300CALL CHRIS 977-2077 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

COMPLETE HKS VANE PRESSURE CONVERTER TUNER (VPC) FOR TOYOTA MIV TWIN TURBO SUPRA LIKE BRAND NEW IN BOX. COMPLETE WITH PLUGIN WIRING HARNESS, PLUGS RIGHT IN TO CONTROL MODULE!! NO SPLICING! NEED THIS COMPONENT TO SEE MASSIVE HP GAINS!!! THIS COMPONENT IS ESSENTIAL IN CORRECTLY TUNING YOUR MIV TURBO!!! $500 OBOCALL CHRIS 977-2077 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

TOYOTA MIV SUPRA TRD VENTED HOOD LIKE IN THE FAST & FURIOUS, PAINTED STOCK COLOR JEWEL GREEN BLACK PEARLHOOD IS IN MINT/EXCELLENT CONDITION!!$700 OBOCALL CHRIS 977-2077 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

Brand New Black Hummer Locking Fuel Door. Never used! $60 OBOCall Chris 977-2077 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

tailgate from 2008 F350 Super Duty pickupslightly damaged fron contact with 5th wheel trailerdark shadow grey metallic in colorcall Jim at 505-250-3384 Location: NE heightsits NOT ok to contact this poster with services or other commercial interests

I have an Exedy KSB04 clutch kit that I do not need. It fits most Subaru 2.5l 5MT non-turbo models, but check and make sure it is right for yours. I have the entire kit: clutch disk, pressure plate, release bearing, pilot bearing and alignment tool brand new in box. This link has an application chart: http://www.importperformanceparts.net/imports/exedyclutchkits-subaru.html . I am firm on the price since it is brand new and worth it. Call Chris @ five-zero-five-nine-eight-zero-nine-three-four-five. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Parts for all kinds of cars. Can paint the parts you need, hoods, bumpers, fenders you need to match your car. Todd 710-5842 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I have both driver and passenger side mirrors from my 2001 Silverado. These mirrors or heated and powered. By one or both the price is $30 each.Call Gary: 889-9510 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I have 4 Ford Mustang Pony Rims for sale 3 are in good condition, 1 has curb rash but still held air and wasnt bent. I ran these until I replaced them with my current rims. No tires. Sold as is. 16x7\" 4-lug, Silver in color. Will fit most if not any Mustang or Fox Body 1979 to 1993...Also for sale is the stock OEM hood from my mustang. Not perfect. Will fit any 87 to 93 Mustang. White in color, does not have latch assembly.Ill thrown in the hood for free with wheel purchase, or hood is $25 by itself. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests