for sale if intersted text (505)948-6019 Location: new mexicoits NOT ok to contact this poster with services or other commercial interests

I have a Brand new in Box Axle Back ExhaustN1 Axle Back ..Chrome Finish..Never Installed..Minor ScratchesFits: 1992-1995 EG 2 Door Coupe or 4 Door Sedan..NOT 3 Door HATCHBACK Unless you want to modify yourselfNot to loud...very Mild Upgrade to a Stock/ Mildly Modified CivicVery Good Gas Mileage...Cleaner Burning fumes...Angle Slash Cut TipText/Call For any Questions..asking $90 obo...Frankie 505.615.5611 Location: I-40/Ne Heightsits NOT ok to contact this poster with services or other commercial interests

For sale Hood from a 1972 Blazer in great condition. Call Dave or Deb at 328-0861 or email anytime at nmhomesales@cs.com Location: Albuquerque NE Heights Tram & Menaulits NOT ok to contact this poster with services or other commercial interests

Set of all 4 (four) 15 inch rims for Jeep CJ or Full-size older Ford trucks. Bolt pattern is 5 lug on a 5.5 inch bolt circle. 8 inches wide with 3 3/4 inch backspacing. These came with a set of tires I bought and I have no use for them. They are straight and clean. Asking $120 or make a reasonable offer. Call Jon @505-417-8180. No emails please. Location: NE Albits NOT ok to contact this poster with services or other commercial interests

call me at 315-5040 Location: neits NOT ok to contact this poster with services or other commercial interests

Tundra with rollover damage...I-FORCE V8 engine runs fine...unit complete...nice interior (access cab)...replace right rear axle/drum and it will move on its own...could be fixed...clear title...Buy and part out....lots of good parts....Hear run...if you need a good engine/trans combo...this is it....Will deliver in the Albuquerque area...Truck on trailer for two more days then the truck will be parted starting next week....See pictures below....If you are serious....respond with a brief message...If you have cash...I will consider all legit offers...Wrecker fees/One week of storage in Santa Rosa plus transport to Albuquerque was $600.......... Location: Candelaria/Richmond NEits NOT ok to contact this poster with services or other commercial interests

Fits an F150 supercrew. Call Gary at 505 991 3080 Location: 5113 Lomas Blvd NE ABQits NOT ok to contact this poster with services or other commercial interests

This Saginaw 4-speed has a Chevy bellhousing and I dont know too much about it. All the gears work. My name is Stevie and you can reach me at (505)453-2396. Call anytime. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I am selling an instrument cluster for a 96-00 Audi A4 with info display. I bought it for my Audi a while ago because some of the LEDs were going out, but I sold the car. I am letting this go for much cheaper than I bought it for. Im selling it as-is. Im asking $120obo. If you have any questions, feel free to e-mail me at jgreer@unm.edu or call/text me @ 908-7763. Please no Nigerian or European scammers. I know a scam when I see one. LOL. Thanks. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Prevent your trailer or vehicle from being stolen. Brand new all steel wheel lock system. $ 25.00 . See at Central Plaza (11109 Central NE - on Central between Eubank and Juan Tabo) Booth 5a - Store opens at 10am - VISA, Mastercard, Lay-a-Ways accepted. Location: NEits NOT ok to contact this poster with services or other commercial interests

Front & rear fenders, panels, doors. Year/model unkown. $600 for all! Call Ron at 505 620*5292. Location: NE ABQits NOT ok to contact this poster with services or other commercial interests

I have a 235 c.i. Chevrolet 6-cylinder engine out of a 1948 truck. It was installed by prior owner to replace the old 216 engine and has a part number of 3769716 on the block which makes it a 1960 engine. Complete with bellhousing, clutch, carb, etc. The prior owner had rebuilt it and then used it for awhile before parking it. I have had it for over 15 years and never cranked the engine. Also listing the SM420 transmission on Craigs. Located outside of Silver City. Call Doug at 575-388-4221 or email dlneher@gmail.com1960 CHEVROLET TRUCK 3739716 235 c.i. casting number Location: near Silver Cityits NOT ok to contact this poster with services or other commercial interests

I have an SM420 Muncie 4-speed transmission out of a 1948 3/4 ton Chevy truck complete with driveline. The transmission shifts thru all gears and I have rotated it to feel any rough spots or grinding. Seems good condition. GMs famous MUNCIE SM420 4 speed manual transmission offers the lowest first gear ratio available - 7.05:1.Here are the specs:Model: Muncie SM420 four-speedShort and light, with a crawly First gear ratio and legendary durability.Case material: Cast ironTop cover material: Cast ironLength (in): 10.4Weight (lb): 135Ratios: 1st 7.05:1, 2nd 3.60:1, 3rd 1.70:1, 4th 1.00:1PTO port(s): Yes, driver sideThe good: Stout, short, and light and are getting rare in the salvage yard.Donor Vehicles: Chevy Trucks from 48-67, busses, and various military applications behind diesel engines.Swap Into: Any Jeep that needs the lowest low gear in a manual transmission, or has rear driveshaft length issues.Identify: It has a cast-iron case, cast-iron top cover retained by eight bolts, the case is 10 3/4 inches long, a power take-off port only on the drivers side of the case, and a bulge near the front on the passenger side are dead giveaways. Sychromesh in 2, 3 and 4th gears.I also have a 235 c.i. 6 cylinder engine that had been rebuilt and installed in the 48. The engine is early 60s and has the bell housing to fit the above transmission for $250. Has not been turned or run in 25 years but stored under cover. Also rear end same truck for $150.I also have a 1964 Chevy 250 6-cylinder that I last started and ran in a 4x4 3/4 ton about 15 years ago for $250. Located outside of Silver City NM about 250 miles from Albuquerque.Call Doug at 575-388-4221 for more info. or email dlneher@gmail.com Location: near Silver Cityits NOT ok to contact this poster with services or other commercial interests

This 455 Olds Rocket Engine is in a 68 Olds Delmont 88 Coupe in VERY RESTORABLE condition1968 Delmont 88 ( sister to the Delta 88 ) 2 Door Coupe with the 455 Rocket engine. Car is in very restorable condition. All Glass is Good, Body straight with only minor NM surface rust. Engine has had some work done. New Alternator. Carb is leaking gas and needs rebuild. Will turnover and no bad noises, but will not run due to faulty carb. NO front seat or headliner. Have Keys to ignition and trunk. Tires all hold air, but need replacement. All orig hubcaps. Air Cleaner removed to show engine, but is is with the car. Fully restored this is over $10k car. Would make an awsome project for a lowrider or race car, or take the engine and put it into your project car, and sell the body. Call Jake at 228-9600 to make appointment to see it. It is at U-Store-It on Central about 1 block east of Louissiana. First $500 cash takes it•Location: 7440 Central SE- 1 block e. of Louisiana •its NOT ok to contact this poster with services or other commercial interests Location: 7440 Central NE, ABQits NOT ok to contact this poster with services or other commercial interests

Sold WITHOUT motor or trans. Staright body. 3.42 gears and limited-slip. Rally II rims,leather bucket seats. Clean title. My name is Steve and you reach me at (505)974-3952. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I have for sale a set of factory take off exhaust pipes w/ mufflers and tips. They were taken offmy 2005 Chevrolet Corvette ~12000 miles. They are in good shape, just a little dirty, but no leaksor problems. They were only removed to install a full cat back Flowmaster system. They arelocated in the NE heights, Lomas and Tramway area. $500 OBOJerry 292-5540 Location: Albuquerque, NEits NOT ok to contact this poster with services or other commercial interests

Stuff that I have --Front and Rear cross drilled and slotted rotors-Front s14 hubs-Front 300zx 4 piston calipers (good condition)Also have-Front dual piston calipers from a Q45 (asking about $75)I only used the front setup for a test fitting. It works for sure on the S13 and S14 models. I do not have a 240sx anymore so i need these parts gone. hit me up if interested 505 328 6308 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

What I have hear is a 03-071/2 Dodge 2500-3500 dual wheel truck bed.The paint a bed are in showroom condition. I do not have the tail lights or the wiring harness for the bed but these items are easily obtained. This bed can also be used for a single rear wheel truck.The asking price of the bed is $800.00 or best offer.Thank you just give me a call and we will work something out I have many parts for these dodge trucks for sale. Please contact me at 505-688-8821daltonenterprises@yahoo.com Location: Albuquerque, New Mexicoits NOT ok to contact this poster with services or other commercial interests

What I have hear is an 1988 Toyota Truck for sale. This truck has no motor or transmission. This truck has the extended cab and indepentent front 4x4 suspension. This would be a perfect truck for the weekend warrior who likes building a truck from the ground up the way you want. This came equipped with air conditioning also. The body is really pretty straight on this truck and all the alxes and differentals are in perfect shape. This truck has a set of 31\"x10.5\"x15\" all terraian tires on it that are at 85 percent tread.Please give me a call on what you think about the truck and maybe set up a time to look at the vehicle at your convenince. The price is $750.00 OBOPlease give me a call if you are interested in the truck. I also have many other toyota parts for sale too. Evann 505-688-8821daltonenterprises@yahoo.com Location: Albuquerque, New Mexicoits NOT ok to contact this poster with services or other commercial interests

For Sale is an Ford 5.0 302 Aluminum GT40 Lower Intake manifold. It is very clean. No port work has been done. Fits all years of 289 and 302 Ford V-8 Engines, Direct Fit Applications include 1993 1994 1995 Mustang Cobra and 1996 - 2000 Ford Explorer. Use as a upgrade for the 1995 Mustang GT This intake was installed on a 1995 Mustang gt - There is a crack on one of the fuel rail mounts (See pic below) but it never gave me any problems. Call or text me 505-730-6354 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Four Ford F-150 17\" Factory Chrome Wheels $250.00 OBO 6 x 135mm w/caps and lugs. Four Continental Contitrac Tires P255/65R 17 mounted, 25% - 30% tread left.Call Al (505) 884-8802 or abs8802@gmail.com Location: NE Albuquerqueits NOT ok to contact this poster with services or other commercial interests

For Sale Steeda Lower Control Arms which were on a 95 Mustang GT in Excellent Condition. Steedas Steel Lower Control Arms really hook, for the lowest 60 ft. times and maximum control off corners. They are a direct bolt-on, with swaybar mounts located to clear differential stud girdles and T-Rex fuel pumps. Dont be fooled by imitators! Steedas Aluminum lower rear control arms are the only ones that use our exclusive four part variable rate bushings to eliminate suspension bind and vibration while planting your tires to the pavement. These Lower control arms should fit Ford Mustangs 1979 to 1998.Call or text 505-730-6354 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

All items are new or like-new, in great condition. At dealer, they are cost more than $250 each.Orignial cargo cover for a Chrysler Pacifica, Gray, Black, Brown $25 eachOriginal cargo cover for a 06-09 Dodge Caliber, black $48 eachOriginal cargo cover for Suzuki XL-7, grey& Tan $40each05 06 07 jeep liberty cargo cover, Gray $48 eachCROSS - RAILS, Factory Original OEMBrand NEW in Box, Condition: New Fits 2001 - 2005 model years on Chrysler Town & Country, Dodge Caravan and Grand Caravan, Plymouth Voyager and Grand VoyagerIf your van has the front to back \"Rails\" then these cross member bars will fit. $30 a set ( two cross bar).New Genuine Suzuki XL-7 2001-2006 accessory New Genuine Suzuki Grand Vitara 2002-2005 accessoryMULTI ROOF RACK a 99000-990YT-005 Max. load capacity 30Kg, Suzuki XL-7 Base Rack. $65 a setJeep Cherokee, 98 or older year model, roof rack system, including two side rails and one cross bar, $20Dodge durango or Chrysler aspen 2004 - 2009 Year model Heavy duty.Roof cross bar, Mopar OEM part, Heavy duty. New in box. $80thanks.call 505 4498949 Location: NEits NOT ok to contact this poster with services or other commercial interests

CarQuest BS280 Brake Shoes for front of 1964-70 CHEVY/GMC TRUCK $10The red ones are the Chevy shoes, the 2 blue are for ?? and I will include them if wanted Location: NE Abqits NOT ok to contact this poster with services or other commercial interests

WELDERS TRUCK BED. MAKE OFFER. YOU WILL NEED TO HAUL IT AWAY. CALL 263-5605 WITH ANY QUESTIONS. Location: 1831 Alif RD NE Rio Ranchoits NOT ok to contact this poster with services or other commercial interests

I have a Warn winch for sale. It is a 8000lb capacity winch and comes with 150 of cable, roller fairlead and the cables used to operate it. This is the winch the current 8274 was based on. It is model 5687 and uses push/pull cables to operate the clutch, brake and switch. It is also know as the Warn Belleview winch. It is in great condition for its age and has not been used very much. It will need 1 new cable to operate it properly. This can also be converted to remote operation if you purchase a solenoid pack for it. $375 Location: NE Abqits NOT ok to contact this poster with services or other commercial interests

Im selling this brushguard off my truck. I had it on a 93 Dodge Dakota, I dont know what else it could fit but Im sure with a little modification it would fit most small or midsize trucks. It comes with a set of Desert fox baja lights that have 55w bulbs in them. Also has a 2in reciever hitch set-up in the center for anything you want that can mount on a reciever hitch.Just needs a coat of paint. has one dent in one of the bars and a couple bends in the light protector bars. $100 O.B.O . Call Ash @ 453-8446 or email on the craigslist email address above. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

4 Alloy Wheels in very good shape with center caps, no lug nuts. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

2 wheels, had temp on TownCar, like new only used 6 months Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

I have a Ford 9\" rearend in great shape with disc brakes. (Not actual picture mine is not painted) For all you Mustang lovers, the measurement from front of disc to front of disc is 63\". It will have to be shortened for your application.Call if interested. 505.507.4877 Location: NE Albuquerqueits NOT ok to contact this poster with services or other commercial interests

I have 3 tires here. Two are LT 235/85 R16s the other is a 7.50 LT R16.All in great shape. All on 8 lug wheels.Askng $50.00 each.Call me if interested.505.507.4877 Location: NE Albuquerqueits NOT ok to contact this poster with services or other commercial interests

22 BOSS RIMS&TIRES IN VERRY GOOD CONDITION ONLY 3 MONTHS OLD $1450 OBO (505)319-7174 Location: NEits NOT ok to contact this poster with services or other commercial interests

I have two rear ends removed from mid 80s Toyota 4x4 trucks.Great shape asking $100 each.Call if interested.505.507..4877We haul JUNK vehicles too. Call now for quote. CASH in 40 minutes for your JUNK.505___ 507__4877 Location: NE Albuquerqueits NOT ok to contact this poster with services or other commercial interests

Toyota Car Rims and Tires - Goodyear tire size 205/65/R15 with 5 hole Alloy Rim; Platinum Achilles Tire (ball on side of tire, not good) size 205/65/R15 with 5 hole Allow Rim; Toyo AO5 tire size 205/65/R15 with black 5 hole Spare Rim; and 5 hole Alloy Rim slight damage. Call 271-1456. Location: Alb - NE Heightsits NOT ok to contact this poster with services or other commercial interests

great condition, came as spares when i got my truck. 15 eagle rims. just need a little cleaning to look awesome!! Zach 249-7086Side step bars $50 for both Location: NE heightsits NOT ok to contact this poster with services or other commercial interests

off a 99 ram in good condition. painted flat black. call or text Zach @ 249-7086 Location: NE heightsits NOT ok to contact this poster with services or other commercial interests

For sale is one factory GM intake manifold. It fits big block motors with large rectangular port heads. Has mounting holes for square or speadbore carburators. This manifold has no provisions for EGR. It was orginally from a 1995 7.4L marine engine. Price is $40 obo, I just need it out of the garage. Call 505-307-3534 Location: ABQ NE heightsits NOT ok to contact this poster with services or other commercial interests

Up for sale are four stock aluminuim wheels for a 93-97 Mazda MX6.Size is 15\" X 6 1/2\"Five hole Bolt pattern : 5 x 114.345mm offsetThe wheels are in descent shape with no curb rash, although one is missing the small center cap. The wheels are straight and balance fine. They have worn 205/55/15 high performance tires mounted on them.Their a good set of wheels, but I need the space in the garage. The price is $20, just to get rid of them. Id also be willing to negothiate a trade if youve got a straight set of stock 16\" aluminium wheels from a 2000 or newer GM truck (6 lug). Call 505-307-3534 Location: ABQ NE Heightsits NOT ok to contact this poster with services or other commercial interests

Looking for new and used pre 1972 car parts. Also want factory performace parts GM/Ford/Mopar. If you have leftovers from a build, closed a shop, collected parts or need to clean out the garage/shop or warehouse reply to this listing with a brief summary, price and phone number. Not interested in anything newer than 1972 Location: New Mexico USAits NOT ok to contact this poster with services or other commercial interests

Hood for a 2000-2004 Hummer in excellent shape, lists for 1600.00 so a heck of a deal on this one at 750.00. Call for info 263-8301 ask for Pete Location: NE Hieghtsits NOT ok to contact this poster with services or other commercial interests

I have a grill for a 2003 Hummer in great shape with a few minor scratches, this grille lists for 450.00. If interested call 263-8301 ask for Pete Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

1959 1960 2DR Hardtop impala Quater windows Drip rails in very good shape. Price $80.00. Email or call 505-400-9197 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I have a 1959 impala Tail fin moulding very slightly bent at the end but still in good shape. Price $20.00. Email or call 505-400-9197 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

Indmar thru transom high performance Big Block Chevy boat exhaust, elbows, downtubes, tips, and some hook up hose. (elbows not necessarly needed and not pictured)Replace those restrictive stock exhaust, with these great sounding, high flowing ones.Call 259-2163 or reply to add. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I am selling a used Taillamp for a 2007 Dodge ram Right hand it is in great condition, no scratches or cracks.If you are interested please call me at 505-515-8842 or E-Mail me at matt011606@hotmail.comThank you Matt Location: Ne heightsits NOT ok to contact this poster with services or other commercial interests

set of brand new motorcycle stands. 150 obo Location: ne abqits NOT ok to contact this poster with services or other commercial interests

1959 1960 impala Rear interior windshield trims both for $60,001959 1960 impala interior side roof moulding both for $60.00They are very good shape. please email or call 505-400-9197 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

USED TWO TIMES IT RIPED MY FRAME CARS GONE SO DONT NEED IT CALL 903-3100 Location: NE ALBUQUERQUEits NOT ok to contact this poster with services or other commercial interests

A nice set of 4 Buick hubcaps for $20. These are somewhere around 65 to 70. In my way, hate to throw them away. Rick @ 314-3235. Location: Albq. Ne. Hts.its NOT ok to contact this poster with services or other commercial interests

The 4 speed had been rebuilt & its going for $400 The 3 speed is used but excellent condition & also comes with the shifter linkage its going for $250 550-4458 JohnThe 4 speed is the one in the pic. The other looks the same but isnt painted Location: NE Albqits NOT ok to contact this poster with services or other commercial interests

Got a foglight panel for 1994-1997 Ford Rangers, never been used or mounted, unpainted, not a scratch on it. Bought it years back for my Ranger but sold it and forgot I had this in storage. New in plastic. First $25 takes it.Call or text 505-450-2675email epitomy24@yahoo.com Location: NEits NOT ok to contact this poster with services or other commercial interests

I have a procharger F1R off of a 70 Chevelle, This is intercooled with a Cog drive.Includes chrome 1 wire alternator, clamps,piping,and boots.It can easily be adapted to fit any BBC car or truck. Blower is in perfect shape.Call or text me at 505-307-1973Would trade for Big ATV Location: ne heights,tramway & lomasits NOT ok to contact this poster with services or other commercial interests

Cevy Avalanche brush guard, these are over 500.00 new. This can be painted any color with bumper paint, Thanks and it sticks out about 14\" from the bumper. I will consider trades Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Racing Full cell 16 gallon $100Racing GM Headers $100Sweet Spindles with aluminum cross shaft MO# 808100L Chevy 11382 $500 the right is a 11385R brand new never used Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Gambler 3 sage dry sump oil pump system complete from oil pump to tankincudes steel braded lines with fire sleeves 40T HTD pullyperterson 3 stage Scavenge manifoldpeterson oil adapterless than 10 races on itpeterson 90 degree remote oil filter adapterfirst $1500 takes it ... Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

2speed munsi lightenedTilton Bell Housing w/mini clutch set up $800 for whole set up will need clutche diskscall anytime 5059171691 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Ohlin Shocks set of 4 $1300 double adjustables remote resiviours 2 7in stroke MO # LM1550012 9in stroke Mo# 105720,. LMJ68000call anytime 5059171691Shocks only have 10 races on them. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

~~~ For a 4-6 or 8 cylinder. --- model 161.2161 ------ key words on meter: \"volts, points, dwell, amps, rpm. ------ Send email if interested Location: NE Albits NOT ok to contact this poster with services or other commercial interests

Got a Craftsman 6\" buffer for sale, has a used bonnet on it already, comes with 2 new unused bonnets (bonnets are washable, too), original box, and manual. I used this for no more than a couple hours with a motorcycle I sold years ago, hasnt been used since, still works great, has been collecting dust since. First $25 takes it.Email epitomy24@yahoo.comCall or text 505-450-2675 Location: NEits NOT ok to contact this poster with services or other commercial interests

I am selling an instrument cluster for a 96-00 Audi A4 with info display. I bought it for my Audi a while ago because some of the LEDs were going out, but I sold the car. I am letting this go for much cheaper than I bought it for. Im selling it as-is. Im asking $120obo. If you have any questions, feel free to e-mail me at jgreer@unm.edu or call/text me @ 908-7763. Thanks. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

All items are like-new, in great condition. At dealer, they are cost more than $150 - $250 each.Orignial cargo cover for a Chrysler Pacifica, Gray, Black, Brown $25 eachOriginal cargo cover for a 06-09 Dodge Caliber, black $48 eachOriginal cargo cover for Suzuki XL-7, grey& Tan $40each05 06 07 jeep liberty cargo cover, Gray $48 eachCROSS - RAILS, Factory Original OEMBrand NEW in Box, Condition: New Fits 2001 - 2005 model years on Chrysler Town & Country, Dodge Caravan and Grand Caravan, Plymouth Voyager and Grand VoyagerIf your van has the front to back \"Rails\" then these cross member bars will fit. $40 a set ( two cross bar).New Genuine Suzuki XL-7 2001-2006 accessory New Genuine Suzuki Grand Vitara 2002-2005 accessoryMULTI ROOF RACK a 99000-990YT-005 Max. load capacity 30Kg, Suzuki XL-7 Base Rack. $65 a setJeep Cherokee, 98 or older year model, roof rack system, including two side rails and one cross bar, $20Dodge durango or Chrysler aspen 2004 - 2009 Year model Heavy duty.Roof cross bar, Mopar OEM part, Heavy duty. New in box. $80thanks.call 505 4498949 Location: NEits NOT ok to contact this poster with services or other commercial interests

Pick-up truck bed cap for a long bed truck. It is the tall type, with plenty of room for cargo, camping, ATVs, etc. It has cab slider access, screened sliding side windows, dome light, and a locking lift up glass tailgate access. All glass is factory tinted. You will need to replace 1 small piece of glass that goes behind the drivers side, and the glass in the slider part. Otherwise, it is in great shape! It was on a 1996 Dodge 3/4 ton long bed truck. Should fit any long bed truck. $75 OBO. Email peakdm@swcp.com or Call 401-2442 Location: NE Heights Albuquerqueits NOT ok to contact this poster with services or other commercial interests

The hubcaps are off of my Ford F250 4X4. They are made to fit 16 inch rims and have a hole for the manual 4X4 switch on the front wheels. Call if interested and want to make an appointment. 505-332-3554 Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Ford Mustang Headlights (left and right), just the headlights, no side markers or inner markers. Will fit any 87-93 Mustang $20oboComplete Mustang rear end from my 91 Mustang 5.0. In good working condition, needs trak-loc rebuild. Ford 8.8\" differential, 2.73 gears, posi, 9\" drum brakes, parking cables included. Complete drum to drum assembly. Also included is a set of brand new in the box, never opened, Duralast Brake Shoes. $100oboOriginal Ford Master Cylinder and Reservoir. From my 91 Mustang 5.0. $20oboA set of front calipers (driver and passenger) off a 87 Mark VII, they are 73mm calipers, includes brake hose, calipers/ bolts, and brake pads. Direct bolt on and great braking upgrade for any 79-93 Mustang. $75oboA set of OEM Ford front calipers off my 91 Mustang 5.0, both sides, in good working condition with brake lines, bolts, pads. $50oboOriginal OEM Hood, not perfect, small dent on front, no hood latch. White in color, will fit any 87-93 Mustang. $50oboSprings and Taillights... SOLD!Will sell any together for a package deal, make me an offer.All items sold as is, in good working conditioned when removed.Reply to email for more info. Thanks. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

I am looking for window glass for the drivers side - Drivers window and rear quarter window. The Bee bee gun vandals shot my daughter 4runner a while back and I am hoping to find these parts thanks. 505-228-3600 Location: Albuquerque NEits NOT ok to contact this poster with services or other commercial interests

NISSAN TITAN TRUCK /ARMADA FACTORY 18\"x8\" 6 LUG ALUMINUM ALLOY WHEELS. SILVER FINISH. $325.00 ALL 4. GOOD CONDITION. Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

04-08 ford f150 rear chrome bumper OEM. no brackets. have to use your own. good condition. $150.00 Thanks>>>>>> Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

TOW DOLLY WITH 2000LB HAND WINCH WELDED ON. LIGHTS WORK GOOD. 2 INCH BALL NEEDED. RAMPS AND STRAPS INCLUDED. ROBERT 385.5087 Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

Class III receiver hitch. This hitch came off of a 2001 Dodge ram 1500. For the three mounting bolts, the holes are 0\", 9.5\" and 14.5\" apart. It may be compatible with many other frames. Includes all mounting hardware. Takes 15 minutes to install. Price is $75. Compare to $150 new, or $200 installed. Call 505-803-2201 or email for more information. Location: NE Albuquerqueits NOT ok to contact this poster with services or other commercial interests

I have a 1200cc bug engine needs to be put back together again. call 505-332-8370 Location: NEits NOT ok to contact this poster with services or other commercial interests

I have a set of 20\" Boss wheels and Tires for sale there in great condition, I bought a Chevy tahoe and the wheels and tires were already on it My wife didnt like the look so I put stock wheels on it instead . The tires are also in great condition lots of tread left ... asking 800.00 for wheels and tires.. No Low ballers or scammers.. cash or trade what do you have... Location: NE HEIGHTSits NOT ok to contact this poster with services or other commercial interests

High performance car stereo system/ sounds great for bass or death metal.all high dollar stuff.Alpine r-12 12in sub speakers qty-2 $140 dollarsAlpine power amp, mvr-f345, 12vdc neg grnd qty-1 $100 dollarsRockford fosgate power amp/powert1001 bd qty-1 $400 dollarsAlpine comp 2-way 61/2in speakers (16.5cm) qty-2 $50 dollarsAlpine type -r 2-way crossover network with one tweet qty-1 $25 dollarsMonster high performance qty-1 $70 dollarsWill sell separate or all for $750 dollars. Contact Cruz at (505) 489-2272 or Doni at (505) 321-8980 Location: NEits NOT ok to contact this poster with services or other commercial interests

Late model dirt car complete rolling chassis, less motor, have extra parts Car is alot of fun! Too many projects need to sell. Call 505-319-2273 or e-mail Location: Albuq. NEits NOT ok to contact this poster with services or other commercial interests

Large journal 327 11 1/2 to 1 60 over with 327 crank that needs to be polished 327 flat top standard pistons with rods Call 505-319-2273 or e-mail Location: Albuq. NEits NOT ok to contact this poster with services or other commercial interests

2003 Black GT Mustang convertible only 50,000 miles. Mint condition. Manual transmission. Great condition - like new. Alloy wheels, new tires. Black leather interior. Existing 80,000 mile warranty. Call Joe at 505-610-9761. Location: NE-Albuquerqueits NOT ok to contact this poster with services or other commercial interests