Ryobi Drill w/charger, almost new. 40.00 firm. Location: NW Albuquerqueits NOT ok to contact this poster with services or other commercial interests

Almost new Black & Decker Drill with charger. Price is Firm........ Location: NW Albuquerqueits NOT ok to contact this poster with services or other commercial interests

Nearly New Hitachi Circular Saw......Used once so same as new........ 2 extra blades. 50.00 Firm. Location: NW Albuquerqueits NOT ok to contact this poster with services or other commercial interests

nice unit sevral fittings and a second hose call Tom 550-1122search my ph # for more great tool deals Location: RRits NOT ok to contact this poster with services or other commercial interests

I have this old time comp tester it still workes great, has two spare fittings in handle. call Tom 550-1122search my ph # for more great tool deals Location: RRits NOT ok to contact this poster with services or other commercial interests

I have a micronta lcd digital multimeter it works very good but it sits in a drawer as i have another multi that I use more often. call Tom 550-1122search my ph # for more great tool deals Location: RRits NOT ok to contact this poster with services or other commercial interests

I have a set of large combo wrenches all but the 1 5/16 is proto sizes1 13/16\" 1 5/8\" 1 7/16\" 1 1/2\" 1 3/8\" 1 5/16\" 1 1/4\" 1 1/8\" 1 1/16\" 1\" search my ph # for more great tool dealsmake me a good offer these could be yours (diclaimer) if your gonna give me a funny offer dont be upset if I laughcall Tom 550-1122 Location: RRits NOT ok to contact this poster with services or other commercial interests

for sale today large size wrenches sizesHusky 1 1/4 $7proto 1 1/4 $10Husky 1 1/16 $7Blackhawk 1 1/16 $7I also have a snap on 1 1/16 knock wrench for $15I also have some small wrenches some SAE some metric for .50 to a dollarsearch my ph# for more great tool dealscall Tom 550-1122 Location: RRits NOT ok to contact this poster with services or other commercial interests

Older Hobart Tig welder. Cyber Tig 200, 200 Amp output 60% duty cycle. Runs on 220vac single phase. Has wheeled welding cart to hold two bottles and water cooler. (does not come with water cooler or gas).Has 250amp torch and 25 leads. Cart rolls. Has Gas shut off timer, and water flow valve. Has reverse polarity switch. Selling because have a miller I am using and dont need this one. The only thing you need to use this welder is a cord end on the cable (to plug it in), gas bottle, and some filler metal. If you plan on welding for long periods you will need a water cooler. This does come with the foot pedal.615-7287 Location: Wyoming and 40its NOT ok to contact this poster with services or other commercial interests

Keller Industrial Type I 40 Aluminum extension ladder. Excellent condition. 858-1274 Location: NEits NOT ok to contact this poster with services or other commercial interests

BRAND NEW; \"ATE\" MacPherson STRUT SPRING COMPRESSOR-$25.00. Call (505) 803-5522. Location: ABQ-WSits NOT ok to contact this poster with services or other commercial interests

BRAND NEW; \"ASTRO\" brand BRAKE SHOE SPREADER PLIER-$35.00. Call (505) 803-5522. Location: Albuquerqueits NOT ok to contact this poster with services or other commercial interests

BRAND NEW; \"STEEL-AIR\" brand-5\" AIR HIGH SPEED SANDER-18,000 RPM-$25.00. Call (505) 803-5522. Location: abqits NOT ok to contact this poster with services or other commercial interests

Chicago 1500 Watt Dual Temperature Heat Gun (572°/1112°)Two temperature settings for a wide variety of jobs from applying shrink wrap to stripping paint and varnish.120 volts, 60 Hz; 3.4 and 11.5 amps; Overall dimensions: 10\" L x 3-1/4\" W x 8-1/2\" HWorks great and in like new condition.Please Note - I do all communicating by email, and willrespond to all emails I receive. I use a gmail account. Location: Paradise Hillsits NOT ok to contact this poster with services or other commercial interests

BRAND NEW; \"SP-TOOLS\" (Made in USA) Part# 91400- UNIVERSAL VALVE SPRING COMPRESSOR (For use on most Foreign & Domestic Engines)-$50.00. Call (505) 803-5522. Location: ALBUQUERQUEits NOT ok to contact this poster with services or other commercial interests

This is a mid/late 1980s Miller Syncrowave 500 Amp TIG welder. Model 500S with SP-4 programmer (hi freq pulse).Works great. Includes foot control and HW-12 water cooled torch and Miller Chillmate chiller (not pictured). Does NOT include tank or regulator.SINGLE PHASE! Wired for 440/480V. is easily rewired for 220V single phase.The beauty of these older welders is that they ARENT all digital with microprocessor controls. So, if it ever has a problem, the board can be repaired rather than replaced.Includes Operators/owners manual for both the welder and programmer which includes all electrical schematics.New price for a comparable machine is body parts you wouldnt want to lose :)If you need a serious TIG machine, this is it. $2500 + tax OBO. DELIVERED to your garage or shop in the Albuquerque area.Weighs about 500 lb. Shipping available to anywhere in the Continental US.Please check my other offerings for lathes, mills, saws, welders, etc.Machine is still available if the listing is still up. Call Art at 505-259-8310 or John (505-880-1540) with any questions and to see run. Thanks. Location: abqits NOT ok to contact this poster with services or other commercial interests

BRAND NEW; \"OTC\" brand (Made in USA) Part# 6024-FORD CRANKSHAFT POSITIONING TOOL-$35.00 (List Price $120.00). Applications: 1993 & newer 4.2L, 4.6L two valve; 4.6L four valve; and 5.4L and 6.8L V-8 engines. Call (505) 803-5522. Location: ABQits NOT ok to contact this poster with services or other commercial interests

I GOT THIS MILLER BLUESTAR 6000 ARC WELDER LOW HOURS 315 WORKS GREAT WITH BUILT IN GENORATOR 110-220 FOR MORE INFO CALL 505-507-6656free hit counters Location: OBO BOSQUE FARMSits NOT ok to contact this poster with services or other commercial interests

Sears Craftsman 10\" Radial Arm SawGreat Shape Location: Tijerasits NOT ok to contact this poster with services or other commercial interests

BRAND NEW; \"NEIKO\" brand-PNEUMATIC DIE GRINDER (Rear Exhaust) 25,000 RPM-$25.00. Also Available: \"MATSUKO\" brand-PROFESSIONAL MINI DIE GRINDER (Pneumatic) Front Exhaust-26,000 RPM-$30.00. Call (505) 803-5522. Location: Albuquerqueits NOT ok to contact this poster with services or other commercial interests

BRAND NEW; \"NEIKO\" brand-EXTENDED SHAFT (PNEUMATIC) DIE GRINDER (Rear Exhaust) 25,000 RPM-$40.00. Call (505) 803-5522. Location: abqits NOT ok to contact this poster with services or other commercial interests

Buckingham pole climbing spikes and belt. Like new. These spikes are for utility poles, not so good for trees. Location: Rio Rancho - Enchanted Hillsits NOT ok to contact this poster with services or other commercial interests

Has more attachments than shown in the pictures. Come take a look and make an offer. Location: 4th and Montanoits NOT ok to contact this poster with services or other commercial interests

Good Heavy duty box w/ lock hang it mount it, whatever you want to do 319 4301 Location: WEST/Sits NOT ok to contact this poster with services or other commercial interests

RIGID RADIO ARM SAW USED MAYBE TWICE! STILL NEW PAID $850.00 FOR IT. CALL 505-554-4596 NANCY Location: ALBUQUERQUEits NOT ok to contact this poster with services or other commercial interests

CRAFTSMAN DRILL. USED. NO CHARGER. MAKE AN OFFER! Location: ALBUQUERQUEits NOT ok to contact this poster with services or other commercial interests

Used in good Condition. Dewalt 24 volt 1/2\" Cordless Hammer Drill. Model#DW006.2 batteries, charger and case.Need to Sell ASAP Call 505-304-1021 or 505-907-7574 Location: Albuquerqueits NOT ok to contact this poster with services or other commercial interests

Im selling these gauges for a lady that lost her husband. They are new. Wholesale they are $243.00 each.$100 cash. Dave 857-0885 Location: N.E. Heightsits NOT ok to contact this poster with services or other commercial interests

2 1/2 gallon Craftsman Tool Vac w/ plug in on motor Location: Rio Ranchoits NOT ok to contact this poster with services or other commercial interests

Rockler mobile base.Eric 450-8212 Location: albuquerqueits NOT ok to contact this poster with services or other commercial interests

Pair of car ramps for sale. Call or email if interested. Eric450-8212 Location: albuquerque its NOT ok to contact this poster with services or other commercial interests

for sale a dremal like tool. I had this up a while ago and got a couple call but lost my phone! so sorry to those who called, please call me back. Has ton of attatchments and rarely been used. thanks.Eric 450-8212 Location: albuquerqueits NOT ok to contact this poster with services or other commercial interests

Reduced Price. Bridgeport Mill, Great condition. Many extra items. Want to sell this item. Location: Albits NOT ok to contact this poster with services or other commercial interests

Good American Lathe for turning beautiful wood items. Not many of these around anymore. Better get this one before it gets away. Location: Albuquerque-UNMits NOT ok to contact this poster with services or other commercial interests

I have for sale a Miller Roughneck 1E welder/generator with 12 HP Kohler cast iron engine. This unit is from 1987 and is in great condition. Hardly ever been used through the years. My great uncle bought it for use around the farm and has been garage kept the entire time. This unit is rated at 180 amps, 100% duty cycle. It is a bullet proof welder! It fires right up. It comes with about a 100 positive lead and about a 30 negative lead.This week it has been tuned up with a new spark plug, air filter and oil change. It is ready to go into service for you.Asking $1000, but am open to offers as this unit has got to find a new home.If interested, please drop me an email or give me a call at 400-4892.Thanks,Greg Location: Rio Ranchoits NOT ok to contact this poster with services or other commercial interests

Air powered bead seater that works great on all tires ranging from atvs to big rigs. Has a 5 gal. tank and holds 125psiits NOT ok to contact this poster with services or other commercial interests

NEW IN PACKAGE PLEASE CALL 505-503-8498 THANK YOU Location: WEST SIDEits NOT ok to contact this poster with services or other commercial interests

4000 watt Generator. Works Great! Call 702-4579. Location: Albuquerqueits NOT ok to contact this poster with services or other commercial interests

HILTI TE-5 SDS PLUS ROTARY HAMMER DRILL – includes 5 bits & Hilti Case – only $150! - Hi quality drill in good condition, works great, all items guaranteed or money back – come check it out! – HAPPY HOCKER PAWN – 3715 Montgomery Blvd NE (corner of Montgomery & Carlisle) – call 883-4114 for questions – Thanks!If you are looking for a quality tool that you can use for any application that requires small to medium diameter holes to be drilled into the concrete, this is absolutely the tool for you. The tool comes standard with an SDS chuck and takes bits from 3/16\" up to 1\" in diameter. It will do its best drilling from about 1/4\" to 1/2\". The tool is 500 watts, 115 volts, and strikes at an amazing 4000 blows per minute in its highest speed …. Bottom line, if you looking for a small hammer drill, look no further than the Hilti TE-5. Location: NE Heightsits NOT ok to contact this poster with services or other commercial interests

Cuts a 3/8\" 65,000 tensile strength mild steel in a 14\" flat bar shear. The blade has a one year warrantee on the original cutting edge and there are four (4) edges to this blade! This isnt some force your way through steel scissor cutting, this is a flat rate bar using a patented guillotine action. A cut you can stand on edge!Will punch from 1/4\" to 1-1/16\" and comes with 10 sets of punches and dies from 1/4\" to 1 inch. Show Room model call 1-800-328-0036 and talk to Chuck or Dale for this special. View more information at http://www.unihydro.com/html/45-14.html its NOT ok to contact this poster with services or other commercial interests

New 9000 lb. 2 post ProKar auto or pickup lift rated at 9000 pounds with drop in adapters and 220V motor, standard 1 year manufacturers warranty.Free freight to Albuquerque freight terminal of our choice (or business with fork-lift)Low-ceiling option show in bottom pic.Serving the Southwest since 1987.Visa or M/C ok. 602-773-1321 or 800-279-LIFThttp://www.swlift.com Location: albuquerque terminalits NOT ok to contact this poster with services or other commercial interests

two - wheel bench grinder ------ send email if interested Location: NEits NOT ok to contact this poster with services or other commercial interests

New in box ProKar 1000# air motorcycle lift with 84\" deck, vise, drop-out included & tie down rings included. In stock in Phoenix & free freight to Albuquerque area freight terminal of our choice (or business with fork-lift)Bottom pic shown with side extensions for $174.95. Add a $119 jack for only $99.00 with lift purchase. Visa/Mastercard ok.Call 602-773-1321 or 800-279-LIFThttp://www.swlift.com its NOT ok to contact this poster with services or other commercial interests

Manta Core drill with multiple bits. This drill is set up with a vacume base and 82\" vertical or horizontal stroke. I used it to drill large stone for fountains. It comes with everything needed to start a core drill or fountain business. It has bits to do up to 8 feet of 1\" diamater holes and 10 feet of 4\" diameter holes. It also has variouse bits for 2\", 3\", 1 3/4\". This is a custome built rig that is already designed for drilling large rock for fountains.I have a table that it attaches to that allows horizontal drilling for up 2000lb slabs. I also have an attachment that will allow horizontal drilling on rough surfaces without drilling into wall. (Table and attachment included with sale)Please call Heath (505) 710 6019 with any questions. Location: Belenits NOT ok to contact this poster with services or other commercial interests

New ProKar 4 post drive on 7000# extended length lift with 180\" tracks & 78\" under tracks when raised to the top lock. Comes with jack tray, casters & 115V motor. In stock for pickup in Phoenix or $99 freight to Albuquerque terminal for pickup or to business with forklift to unload.Aluminum approach ramp upgrade for $149. Visa/Mastercard ok.602-773-1321http://www.swlift.com Location: albuquerque terminalits NOT ok to contact this poster with services or other commercial interests

This is a home built professionally designed Gantry Crane. I used it to move 1000 lb stone fountains. It is designed to be automatically lifted from 6 to fit into a standard garage up to 10 for better lifting. I have used it to lift ATVS, Jet Skiis off a trailer and many stones. It has 2 1000kg Hu-Lift trollys and an electric 1000lb warn hoist. It also has two additional winches welded to the sides allowing one person to easily raise the crane from 6 to 10 feet. The working width is 9 5\". I opted to build this because I was not happy with the quality of what I could purchase. It is very well designed and the specs were for a 3500 lb capacity. I have only used it up to 1000lbs. Similar cranes sell for $3000 without the lift. I will take $1250 cash.Please call Heath at (505) 710- 6019 with any questions. Location: Belenits NOT ok to contact this poster with services or other commercial interests

SEARS CRAFTSMAN TABLE SAW10 INCH RADIALIN GOOD CONDITIONSTARTS RIGHT UP EVERY TIMEIF INTERESTED CALL JOHNNY 344-1818 THANKS Location: OSUNA & EDITHits NOT ok to contact this poster with services or other commercial interests

Dievlbiss XR2750 Powerwasher 2750 psi works perfect about 6 mo old The response for this thing has been over whelming and I lost track of whos interested and who is not most wanted a photo so I have posted one. it is in perfect running condition it has no problems it is very powerful on highest setting it is down right dangerous trust me on this one I speak from experience It will also take the paint right off a car again from experience I am looking for the First $225 cash and no hassles It is not stolen I purchaced it from ebay used it for what I wanted to use it for and now I am finished with it It is a great little piece of equipt I do not see the need fo it to sit and gather dust. send me an e-mail kenbmb@aol.com or call 235-0954 thanks Location: Los Lunasits NOT ok to contact this poster with services or other commercial interests

Need to Sell ASAP Dewalt 24 volt 1/2\" Cordless Hammer Drill. Model#DW006. Used in good condition.2 batteries, charger and case. Call 505-304-1021 or 505-907-7574 Location: Albuquerqueits NOT ok to contact this poster with services or other commercial interests

For sale is a good used Tradesman 10\" compound slider miter chop saw with a lazier guide & side extensions. Location: Albuquerqueits NOT ok to contact this poster with services or other commercial interests

Nice used portable / hand held pneumatic drum sander with attached air motor. Industrial quality machine. See attached photo of a similar model sold by Sand-Rite. USA made, not an import.$175.00 -call 505-310-2966. Location: Santa Feits NOT ok to contact this poster with services or other commercial interests

For Sale: Matco Tool Box 4s series. 17 drawer, 42 inches tall, 72 inches wide, 24 inches deep. This thing is huge! it is black with a stainless steel top. Like new, barely used. My loss is your gain. This box is $6,000 new. I am willing to trade for a car (preferably a mustang but call me and make me an offer) or anything of a $3,000-$5,000 value or its yours for $3,000. Any questions please email me or call me at 507-0468. thanks Location: ABQits NOT ok to contact this poster with services or other commercial interests

Hydraulic Punch Set,1/2-2In,Angle DriverHand Tools > Electrical Tools > Punch Driver Sets Hydraulic Punch Driver Set, Included 1/2, 3/4, 1, 1 1/4, 1 1/2 and 2 Inches Slug Buster Punches and Dies, Draw Studs, Plastic Carrying Case, With Right Angle Driver Head that Rotates 180 Degrees Grainger Item # THIS UNIT RETAILS FOR $1300.00 NEED THE MONEYCALL REED 214 562-8951 Location: RIO RANCHO /550its NOT ok to contact this poster with services or other commercial interests

Up for sale is an Oster hand held massager. Works awesome! Location: Rio Ranchoits NOT ok to contact this poster with services or other commercial interests

Hope I have the correct picture, selling off my husbands tools. Have lots more listed.Listed on a website for $549.95, see at:http://www.tylertool.com/mak18634powp.html?utm_medium=shoppingengine&utm_source=googlebase&cvsfa=1230&cvsfe=2&cvsfp=mak18634powp Location: Corralesits NOT ok to contact this poster with services or other commercial interests

Assorted drills, winner take all! Location: Corralesits NOT ok to contact this poster with services or other commercial interests

Awesome saw, used for trim on a couple of houses-great price for lightly used saw.see path at Amazon.com Review: http://www.amazon.com/Hitachi-C10FS-10-Inch-Slide-Compound/dp/B0000223L5Think of the Hitachi C10FS as the Clydesdale of all the industrys sliding compound miter saw workhorses. Its tough, well built, and feature packed. One of the few saws on the market that bevels to both sides, the Hitachi lets you make compound cuts to the right or left without the hassle of transferring marks or repositioning stock--and the 10 amp motor is situated above the arbor to allow a wider cutting range. Unlike other top-heavy saws, the Hitachi remains well balanced and easy to maneuver--which, along with its smooth-operating blade guard, makes it a relatively safe saw to use. The saws table allows a good miter range, swinging 57 degrees right and 46 degrees left, and the unique bevel and miter scale makes cutting crown molding a snap whether youre an expert or a novice.We especially like how Hitachis multi-V-belt soft-start transfer delivers power smoothly. The saw doesnt jump or buck on start-up, so cuts are generally safe and easy to keep true. The saw cuts 3-1/2- to 12-inch stock at a 90-degree miter, and at 45 degrees the saw handles a 9-inch cut. We also like that the Hitachi features adjustable plastic fences that give support when cutting small pieces close to the blade, but are a bit disappointed that the saw lacks a detent override, a mechanism that disengages the preset table settings and makes it easier to lock into angles close to 0 and 45 degrees.No question about it, though, the Hitachi C10FS is a tough saw that easily stands up to the rigorous demands of the job site; ours survived a tailgate tumble with hardly a scratch. The well-designed bevel-locks and scales, nicely balanced head, and smooth operation make this a great tool whether youre a professional or a serious home improvement enthusiast. --Mark McDonald From the ManufacturerReduce noise and recoil during start-up with the soft-start feature on this 10-inch saw. The saw is capable of cutting up to 4 by 4 inches at 45 and 90 degrees with a crosscut reach of 12 inches. The electronic speed control helps maintain rpm for constant cutting speed, and youll get superior accuracy from the linear ball bearing slide system. Professionals will appreciate the right and left bevel cutting capacity and cutting-depth stopper for creating smooth grooves. Your saw purchase includes a slide fence, vise assembly, dust bag, and wrench. Location: Corralesits NOT ok to contact this poster with services or other commercial interests

I HAVE A SMALL GOLD PLATING MACHINE BY GOLD MAGIC SIZE OF MACHINE IS 5 1/2 INCHES X 6 1/2 INCHES .. USED BUT WORKS GREAT .. I HAVE A LITTLE BIT OF 24K GOLD THAT COMES WITH IT .. IV DONE RIMS , BUMPERS , ALL THE WAY DOWN TO JEWELRY AND COINS ASKING $250 BUT WILL TRADE FOR A GOOD WELDER... 505 489 -7975 Location: ALBits NOT ok to contact this poster with services or other commercial interests

USED 18\" LOBO BANDSAW$125 OR BEST OFFER Location: ABQits NOT ok to contact this poster with services or other commercial interests

Assorted Drills. Location: Corralesits NOT ok to contact this poster with services or other commercial interests

Cornwell tool box.. S/N 16747. I have two sets of keys. All the drawers have the foam padding on the bottom. The top locks open. Im asking $1,000 but I will take a reasonable offer. Call or text me @ 505-215-4550 or shoot me an email. Thanks for looking... Location: Farmingtonits NOT ok to contact this poster with services or other commercial interests

This little desk will make a great work bench. It is 48\" x 30\" and has two drawers for tools, supplies, etc. There is one very slightly damaged corner on the laminate top in the far left hand corner. Location: Candelaria / Tramwayits NOT ok to contact this poster with services or other commercial interests

I bought this air hose and used it once literally, my wife had bought me another one for x-mas, call me at 505-610-3108 if you are interested. Local, cash and serious inquiries only. Location: Albuquerqueits NOT ok to contact this poster with services or other commercial interests

Like New- Battery pack not included Location: Rio Ranchoits NOT ok to contact this poster with services or other commercial interests

Brand New-Battery pack not included Location: Rio Ranchoits NOT ok to contact this poster with services or other commercial interests

Like new- Battery pack not included Location: Rio Ranchoits NOT ok to contact this poster with services or other commercial interests

Like New-Battery pack not included Location: Rio Ranchoits NOT ok to contact this poster with services or other commercial interests

Mitutoyo 129-128 - Micrometer set depth 2.5Interchangeable Rod Type Depth Micrometer • Ratchet stop for consistent and repetitive measurements.• .157 inch diameter interchangeable rods, with lapped measuring end, are calibrated and tested at the factory. The rod length can be adjusted, to compensate wear on the measuring tip, with two supplied wrenches.• Satin-chromed finished throughout.• Crisp clear graduations on the thimble.• Complete with fitted carrying case.• Range: 0-6 inch• Resolution: .001 inch• Base Length: 2.5 inches• With interchangeable 3 piece rods.Lists for $160.00. If interested email me at sales@machinetooloutlet.com or call me at 505-717-9129. Thanks for looking. Location: ABQits NOT ok to contact this poster with services or other commercial interests

Sioux #680 Valve Grinding Machine completely taken apart and rebuilt in excellent working order. The machine is to reface automotive valves in cylinder heads Call 275-7877 or 991-4990 $950 obo Location: SE Heightsits NOT ok to contact this poster with services or other commercial interests

Working 500 watt halogen lamp on short stand. Location: ALB / NEits NOT ok to contact this poster with services or other commercial interests

FOR SALE OR TRADE WORDS POWR-KRAFT 230 STICK WELDER WORKS LIKE A CHARM JUST A LIL DUSTY $650.00 OR TRADE FOR WIRE FEED I SUCK AT STICK WELDING CALL 505 967 1754 . OR E-MAIL ME A PIC OF YOUR TRADE .THANK YOU. Location: ABQits NOT ok to contact this poster with services or other commercial interests

60 gallon Qualair air compressor. 5 HP motor with Monster size 2 stage rebuilt head. Solid, runs 3 phase 220 power. If interested contact sales@machinetooloutlet.com or Heather at 505-832-4398 and she will relay the info. Delivered anywhere in ABQ for $75.00. Placed on a truck for $50.00. Unit is sold as is with no warranties implied or expressed. Can show any interested party how it runs at our shop. Email me at sales@machinetooloutlet.com or call me at 505-717-9129.Thanks for looking!!!!!!!!!!!! Location: ABQits NOT ok to contact this poster with services or other commercial interests

Price is OBO and delivery can be made anywhere in ABQ for $200.00 or $75.00 to put on your truck. USED \"HARDINGE HC\" SUPER PRECISION CHUCKER LATHE Type: 8 Station Chucker Model: HC Condition: Very Good General Specifications: Swing Over Bed: 13\" Spindle Capacity: 5-C Round Collet: 1-1/16\" 5-C Square Collet: 3/4\" 5-C Hexagon Collet: 7/8\" 5-C Hardinge Stop Chucks: 6\" Travel of Cross Slide: 4-1/2\" Cross Slide Power Feed: 11/32\" to 6-1/4\" IPM Carriage Power Feed: 1/4\" to 10\" IPM Spindle Speeds (3 - Selector): (Low) 125 - 1100 RPM (High) 1100 - 3000 RPM Electrics: 1.5 HP; 230 Volts; 3-Phase; Approximate Dimensions: 69\" L x 36\" W x 65\" H Approximate Weight: 1,750 Lbs. Machine Is Equipped With: 5-C Lever Draw Bar Hardened & Ground Bedway (Dovetail bed)8-Position Turret (Indexing) Chip Shield 3-Jaw Chuck Power Cross Feed Numerous 5-C Collets (Shown)Numerous tooling (Not Shown)Parts list manuals includedUnit is sold as is with no warranties implied or expressed. If interested email me at sales@machinetooloutlet.com or call 505-717-9129. Location: ABQits NOT ok to contact this poster with services or other commercial interests

Black & Decker 12\" Professional Chop saw. Email me at sales@machinetooloutlet.com or call me at 505-717-9129. Thanks for looking!!!! Location: ABQits NOT ok to contact this poster with services or other commercial interests

Tapmatic tapping head. The Model # is 30 TC/DC. It has a 1/2 diameter arbor on it. Unit will be sold as pictured. This tapping head costs over $550.00 at todays prices.Email me at sales@machinetooloutlet.com or call me at 505-717-9129. Thanks for looking. Location: ABQits NOT ok to contact this poster with services or other commercial interests