2002 GM Z06 Corvette wheel. Speedline 17x9.5Jx54. Slight cosmetic blemish as shown in two photos. Online retails for $200 - $500. Asking $100, reply if interested. Location: Stevensville, MTits NOT ok to contact this poster with services or other commercial interests

chevy 350 hot tanked and painted black new freeze plugs. stock crank turned 20 under with scat forged i beam rod and keith black piston moly rings all profesionally balanced the cam is a comp 280 h 480 lift cam with matching lifters and springs plus assembly. the heads are a 305 high compression with minor port and polish along with a lightened valve train for higher rev capabilities. the intake is a edelbrock rpm air gap intake with a holley street avenger 670 carb with a fresh rebuild the distributer is a points style with an accel points eliminator kit for better spark with the msd coil. mickey tompson valve covers and also comes with a flywheel starter and water pump. the motor should put out around 400 hp at the fly so great little motor. also have a long shaft th350 trans with a freash rebuid( i pulled it apart to check the clutches) unknow milage but shifted great and never a trouble. any questions call sam at 602-621-3677 $1800 firm this engine only has brake in time on it built for project and then project was scraped and sold this has only a few hours of run time. Location: stevensvilleits NOT ok to contact this poster with services or other commercial interests

was on my 383 big block but my cudas a manuel so have no use trans fluid clean and red need to sell asap call sam at 602-621-3677 250 obo was pulled from a running and driving car with 80k on it. works great. will need a output seal. please no e-mails call only has torque converter starter and flywheel from the 383. Location: stevensville its NOT ok to contact this poster with services or other commercial interests

I Have a Ranch Hand Grill Guard for sale will fit a 88-98 chevy or gmc pickup $700.00 obo # 406-369-0070 Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

This is a nice set of Hercules H/P 4000 tires, with a star shaped pattern rim. The tires are size 215-60SR13. Call Matt at 406-360-4712 if you have any questions. Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

This is a like new set of Cooper Discovery AT tires size 31x10.50R15. I would say that they have about 85% tread left. I will take $350 for the set or best offer and would consider trade if you had something good. Call Matt at 406-360-4712 if you have any questions. Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

This is a nice set of 4 16\" Chevy truck 5 lug pattern rims, with Dunlop Grandtrek 265-70R16 size tires. I would say about 70% left on the tires. Call Matt at 406-360-4712 if you have any questions. Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

Commercial A.R.E. Pick-up toll topWeather Guard roll-out deckWork lights insideOrange \"kojack\" strobe on top Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

Took box off truck to put on a flat bed. Includes box with tailgate and bumper. There is a cut out in the box for a gooseneck hitch. There is some damage on the right side of box as indicated in the pics. for more information please call Cody at (406) 880-4744 Location: Stevensville, MTits NOT ok to contact this poster with services or other commercial interests

Ladder rack off a 2005 Nissan Frontier, inside measurements are 58.5\" by 71\". Made by an experienced welder. Traded the Nissan and rack doesnt fit my new truck. Could fit nearly any small pickup with some modifications. Email for more info or to see it in person. Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

Took off the box to put on a flat bed. Some minor damage on right side as shown in pics. Has a cut out in the floor for a goose neck hitch. Included: box, tailgate, and rear bumper.Make an offer...Any questions please contact Cody at 880-4744 Location: Stevensville, MTits NOT ok to contact this poster with services or other commercial interests

8 GM p/u box. great shape. 406.799.2973 Location: stevensvilleits NOT ok to contact this poster with services or other commercial interests

Two 9-22.5, and four 10-22.5 Truck tires mounted on 1957 Chevrolet 2 ton truck. May be recaps, may not. Assume they are, but they do hold air, and have good tread. They are tubeless type. Wheels included. 100.00 firm for all six. Will be taking the rest of the truck frame to Pacific Recycling, so if you want all Ill take 150.00. Ill be taking the cab and motor. 14 steel flatbed is for sale on a separate Craigslist ad for 150.00. See pics and email, or call Dan at 406-777-0293 Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

This is a Leer Canopy with the middle latch and Yakima Package. It fits all Dodge longbeds and is in great shape. It cost me $2500 new.Call me at 406-274-0828 Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

Parts listed below are for Chevrolet vehicle.Roller Rocker Arm Set 1.6:1 ratio, 3/8 stud Set of 16. Part number 12370839Valve Springs, 16 Total pieces, Part Number 12551483Caps (Valve Spring Retainer) 16 pieces, Part number 10212808Keys, 32 pieces, Part number 24503856Shims, 16 pieces, LT4 Part number 10212809All NEW items. Will sell separately if requested. No scammers. Serious buyers only.Payment by Money Order only. Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

Pair of Chevy Short Block 283-400 (D-Port). 1 5/8\" Tube Diameter, HTC Coated, 2 1/2\" Collector Size. Part Number 66409. New in Original BoxNo scammers. Serious buyers only. Money Orders in payment only. Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

Brand new. Two parts. Chevy cast iron Vortec cylinder head assembly. Part number 12558060. Casting number 10239906. Completely assembled with 1.94/1.50 valves. uses bare head number 12529093. 64cc Combustion chamber. Straight spark plugs. No heat risers. Requires Vortec specific intake manifold.No scammers. Serious buyers only.Payment by Money Orders Only. Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests

Turbo Net self supporting tailgate net model #95015. Fits full size truck.New, never installed. Turbo Net features:Heavy duty telescoping poles, easy on - easy off, Light duty cargo restraint, Fits anywhere inside your truck bed,Use with or without tailgate, Tough and durable, Wont sag or tear, Increased visibility, Cuts down on drag, Easy to install. All necessary parts for installation are included.

roof rack, ladder rack for van. has latch for securing ladder. 125.00 please contact me @ 406-777-1485 or racer9@q.com

i have 4 mickey thompson baja claw (bias) tires. im asking $425, i need to sell them. 35x15.5x15. 406 214 6429.

Turbo Net self supporting tailgate net model #95015. Fits full size truck.New, never installed. Turbo Net features:Heavy duty telescoping poles, easy on - easy off, Light duty cargo restraint, Fits anywhere inside your truck bed,Use with or without tailgate, Tough and durable, Wont sag or tear, Increased visibility, Cuts down on drag, Easy to install. All necessary parts for installation are included.

Willys Overland does not have an engine or transmissiom. Has some rust in body the windshield frame is rusted out. have a replacement in rear. Has extra parts in rear also. This is a two (2) wheel drive. Want $300.00 OBO. Call (cell) Gary 503-704-3733.