2001 ford f350 4x4 ,v10,auto,utility,onan 6300 propane gen,5.5 cfm air compressor,163k miles,call 406-543-0382 Location: missoula mt.its NOT ok to contact this poster with services or other commercial interests

2000 ford f450 telsta 32 ft. bucket,v10, auto, 4.5 onan gen.$12,000,call 406-543-0382 Location: MISSOULA MT.its NOT ok to contact this poster with services or other commercial interests

nine 20 ton tilt bed trailers 32-22 foot beds,$10,000-$13,500 Location: missoula mt.its NOT ok to contact this poster with services or other commercial interests

case maxi sneaker-b cable plow,shows 757 hours, $5000.00,call 406-543-0382 Location: missoula,mt.its NOT ok to contact this poster with services or other commercial interests

The imageRUNNER 330S is a standalone digital copier ideal for users demanding the high image quality and editing capability offered by digital technology. It operates at a speed of 33 pages-per-minute and supports output resolution of 1200 x 600 dpi at 256 grayscale. Its internal Image Server has standard memory of 32MB, upgradeable to 96MB, and supports Scan-Once-Print-Many, Automatic Image Orientation, Automatic Page Layout for booklet-making and Confidential User Mailboxes for secure printing applications. The imageRUNNER 330S comes standard with built-in duplexing of paper sizes from statement to ledger, and a 1,050-sheet paper supply via two 500-sheet paper cassettes and a 50-sheet stack bypass. Best of all, with its modular upgrade path, the imageRUNNER 330S can be easily expanded and custom-tailored with network printing, Super G3 faxing and scanning capabilities to meet the information management needs of many customers. The Printer was working when removed from service and I can deliver in the Missoula Area.(509) 981-2758 Location: Missoula, MTits NOT ok to contact this poster with services or other commercial interests

1993 ford f700 16 ft. flatbed,7.0 eng.gas,auto trans,$5000.00,under CDL, call 406-543-0382 Location: missoula mt.its NOT ok to contact this poster with services or other commercial interests

210 horsepower dt466 dt 466 electronic engine, 1996 only 10,000 miles since new rebuild from international, runs perfect, hear it run still in truck. whole wrecked cab and chassis with 7 speed trans $4000. call Steve 544 5303 Click to Enlarge Location: missoulaits NOT ok to contact this poster with services or other commercial interests

5 near new low profile 22.5 recaped truck tires on steel budd wheels call steve 544 5303 Location: missoulaits NOT ok to contact this poster with services or other commercial interests

Cummins m11 370 ESP cpl 2037, out of 1997 Freightliner, 2000 hrs. no starter, alternator or flywheel. call paul at, 543-7971 Location: missoulaits NOT ok to contact this poster with services or other commercial interests

Xerox ASF100 Booklet Maker Automatic Stapler FolderXerox Plockmatic ASF-100 Bookletmaker Automatically Stitches - Folds to create booklets, manuals, reports, proposals, directories, study packs and catalogs. This ASF 100 has only low low count of 6243 on the meter it! Here is your chance to get a almost new machine for pennies on the dollar! It came out of a copy shop that didnt use it much. Its been sitting for a little while and the pulleys could use some lubricant, it squeaks a little sometimes. the out feed roller is pictured and broke in transit, we repaired it with super strong epoxy. It now works as good as the other! As you can see in the pictures below it produces a quality booklet.The unit is available for local pickup. We will crate it and ship with your carrier We can deliver it to a Missoula freight terminal to save some cost. Missoula zip code is 59801, freight class is 100, Crate dia. 48\"x40\"x 36. Unit weighs 300lb. Crate should be approx. 425lb. Most freight co. use 500lb as min. Cash or Will Ship when Funds CLEAR the bank! Sorry No exceptionsCompatible with most Presses, Copiers , and Conveyor Systems or can be a stand alone, manually fed booklet maker.The ASF100 Booklet Maker produces high quality booklets. It is easy and only takes seconds to program the fully automated system. One touch adjustments:Automatically set stapling and fold positionsSide guides and joggers are set from the control panel for standard paper sizesMemory program feature - To automatically set up frequently used, non standard jobsStables, folds and trims up to 20 sheets of 20lb paperPaper range is 20lb to 110lb index5000 staple cartridge increases productivityHeavy duty staple clinchers produce an accurate stapleIncluded is the Manual and interface cable.Booklets are made at a speed of up to 23 booklets per minute.The ASF100 Automatic Stapler-Folder can fold and saddle-staple booklets of up to 20 sheets. Inline, proportional stapling ensures a reliable tight and secure staple. This is a must have if you need to put together manuals, reports, proposals, directories, study packs of catalogs.This unit interfaces to the output of many mid-to-high end Xerox machines. (ie: Manual covers Xerox DocuTech Publisher model 90 and Xerox 5100, It also runs a standalone unit. It positions at 90 degrees to most any copier output tray. It folds, staples, and ejects very quickly. It accepts several different sizes of paper, presets for 8.5 x 11 (A4), 8.5 x 14, 11 x 17 (A3), customs setting for all other sizes and has automatic (motorized) adjustment settings for each. Control Panel adjustments are there to get the paper folded and staple adjustments just right. It is sensor driven, and automatically starts when paper is inserted. There is a mechanical action that makes sure the packet is straightened/stacked properly before the fold and staple. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Ibico Model Epk 21 Electric Hole Punch / Manual Plastic Comb Binding Machine. For compiling booklets for sales literature, training manuals and more! This is a quality unit that looks Great and works Great!. I placed the maximum amount of sheets for punching - 25 sheets of copy paper (20#) and it punched through without hesitation, nice clean cut. also pictured is the comb binding into a finished product. There is a large bottom tray that collects all of the paper (chads) that are punched out, will handle large runs. The manual operation of the comb binding process move back and forth smoothly. All of the settings/size knobs work great. The foot control pedal works perfectly. This would be allot for a home office, Great for a Small office up to a large commercial busy office. All functions were tested. Item is guaranteed to work as described. Included: Pictured EPK 21 Comb Binder w/foot pedal, 5 boxes of Ibico black plastic combs!The boxes are not sealed, but as you can see there is more than enough to keep you going for awhile!The 2\" combs box is filled right to the top.The 1 1/2\" combs box is 1\" from the top.Picture shows three boxes of 1\" combs. we consolidated them into two very full boxes.The 3/4\" combs box is half full with a few 1/2\" and 1/4\" combsManufacturers DescriptionThe EPK-21 by Ibico is a space-saving, high-production electric machine that is perfectly designed to meet competitive demands. Its 4-position punch margin guide setting allows for versatile punching options. Foot pedal allows for fast hands-free operation. Punches up to 25 sheets per pass and binds documents up to 425 sheets (2\" thick). Binds documents up to 12\" long. Ibico EPK21 Plastic Comb Binding MachineHeavy duty electric punch and manual binder for plastic comb binding. * 12\" punch and bind width * Up to 25 sheet punching capacity (20# stock) * Manual binding up to 2\" capacity * Precision engineered punch dies * Adjustable binding lock for convenient binding of multiple, same-size documents * Electric punch (foot switch operated) * Adjustable punch depth * 21 punches can be individually disengaged for punching smaller sheet sizes * Large chip drawer * Integrated binding gauge * All metal construction * Size: 15-7/8\"(H) x 19-1/4\"(W) x 12-3/4\"(D) * Weight: 52 pounds * UL listed, CSA approved * Voltage: 110 AC volts. The GBC C800 Pro is made under another branded name for The Ibico EPK21 Plastic Comb Binding Machine and they both retail new for $1800-$2200. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

I have a few boxes of white clothing gift boxes that were used in a retail store. Perfect for the holidays to wrap all your clothing gifts in! I will sell the box full of them for $30. I have different sizes of boxes as well. Please contact me with any questions. Thanks for looking. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

We have two refrigerated display cases we bought from a bank repossession sale of a candy business that closed suddenly. They both have a marble look and are In awesome condition. The $ 1500.00 one is 46\" wide and 26\" inches deep. The larger one we are selling for $1800.00. It is 71\" wide and 31\" deep. They both have storage shelves and a lock-out doors in the bottom back of the units. They both have brass shelves and brackets. They both have a flat surface on top for display. These are a steal at this price . They sell new for around $ 4800.00 to $ 5800.00 each. We do this for a hobby and are only turning our money quick. THANK YOU CALL ( 406 ) 728-3252 Location: missoula,montanaits NOT ok to contact this poster with services or other commercial interests

Hermes JKV 30 tempering- and moulding-machine with vibrating-table and a 30 kg. capacity for moulding chocolats and hollow figures. We bought out a bank repossession sale of a candy store that went out of business. We got everthing they had. We have two refrigerated marble lokking display cases and of course this machine. All of the items are in great shape because they wer e not in business very long. I called the only distributor in the US about this machine and he said new they sale for $9500.00. He said he had a used one he would sale for $6800.00. We are willing to sale this at a reduced price because we do this as a hobby. The first $ 4000.00 gets this machine. Thank You. CALL ( 406 ) 728-3252. Location: Missoula, Montanaits NOT ok to contact this poster with services or other commercial interests

10 foot carpet stinger easy conect/disconectCall with any questions 208-661-2732 Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Symonds Forms 4, 6 and Fillers, 3 Power trowels, 2 Goose Neck Trailers, 1 Pull Trailer, 1 - 67 Chevy 2 Ton, Slab Crab Green Cut Saw, 30 of Morrison Screed, Wire Feed Welder, Much Much More. Call 406-239-8478 with inquiries Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Will sell all or seperate call 406-546-9965 for more information. Location: Missoula, Montanaits NOT ok to contact this poster with services or other commercial interests

hydrolic unit and chain saw as new 169 hrs original cost over $8000.00 thats right $8000.00 and the chain saw $4500 total original cost over $12000.00 wow I cant believe i did that but I was busy making $$$$ now your turn. Why buy new this is used 4 weeks Im going nout of business selling all my loss your gain do those concrete jobs in style 406 360 0160 Location: missoulaits NOT ok to contact this poster with services or other commercial interests

Kingfisher Kookers Rotisserie Smokers National Award Winning Rotisserie Smokers http://kingfisherkookers.com/products_rotisserie_smokers.htmSee UPDATES! Click HereCommercial Rotisserie SmokerThe smoking/cooking chamber is 42\" x 48\" x 48\" and contains six trays. Each tray will hold approximately five 15 pound turkeys. Seven to nine sides of ribs (3 1/2 downs) can be placed on each tray by using rib racks. A tray will hold five to six trimmed briskets; the amount of trimmed brisket can almost be tripled with rib racks. Whole hogs, dressed (up to 70 pounds) and trussed can be placed on each tray. Trays 10 1/2\" x 44\" create a total tray surface of 2,772 square inches. By adding rib racks tray surface is 7,282 square inches. The firebox area is 24\" x 16\" x 16\", with hot air chamber inserts on each side. The firebox will hold split wood up to 24 inches in length. The oven is 9\" x 18\" x 42\", and has a safety latch on the door. The top of the oven serves as a warming area for sauces and marinades. The available warming surface is 24\" x 42\". There is a work table, 30\" x 42\", twelve inches above the warming surface, that includes a handle for moving the unit when it is off the towing tongue and on the caster wheel. This smoker, built on a trailer axle, with springs and tires, towing tongue and caster wheel, is road ready. Weight of this unit is 1,075 pounds.* 6 trays * Work Table * Built on a trailer axle Road Ready - 6 Rotating Trays, Center Firebox, , Wood Basket, Center Work Tables & Shelves, 1 Fold Down Side Tables, Spare Tire Mount, Tail Lights. Location: MISSOULAits NOT ok to contact this poster with services or other commercial interests

Trailer with two stainless steel four sink units previously rented to the Forest Service during fire seasons for use at camps. Includes potable water tank, hot water heaters, generator, and the works.Would also be ideal for catering or other events such as fairs, sporting events, or festivals where extra sinks are requiredExcellent return on investment.For more information or to see, call 406-728-0638. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Established coffee house in the University District, one block off of campus.  A great cozy space that gives students and university residents a comfortable and convenient place to gather for a beverage or a bite to eat.1700 square feet, which includes a full kitchen (Stove, Prep Area, Sinks, & Dishwasher)Fully furnished, with ten tables, two couches, and a flat screen TV Gas fireplaceOne upright freezerTwo commercial refrigeratorsEspresso machine, grinder, and other coffee components Eight door walk-in coolerWireless Internet equipmentFor more information contact Don at don.holst@gmail.com or 406.529.1791 Location: Missoula, MTits NOT ok to contact this poster with services or other commercial interests

HI,I have a maternity consignment boutique in missoula, montana. This boutique has quickly taken off and is becoming very successful, and popular with moms all around montana. I am pleasantly surprised but I have had customers come in from billings, Helena, butte, Idaho, Hamilton, and many other places. Many of the customers I have locally are returning weekly to grab the new consignments constantly coming through the door. I have enjoyed and been excited to see the growth we have had since opening our doors, however, I am pregnant with my second, unfortunately I am a high risk pregnancy. I also, have a one yr old, and a health concern that recently put a damper on things. I have decided it would be in the best interest for the store to sale the biz name, lisc, product, inventory and let somebody else share in the success of what is to come with this business. We have grown greatly, and every week are surprised at the number of sales, and customers. I am asking a very fair price, honestly it is low for a business that has been established I know. However, we are fairly new (5mo) our books show a very promising profit that will only increase with time. I have made a contact with community medical center, along with several womans groups who exchange advertising with me. It has been very successful so far. Of course I would provide you with all of these names and numbers along with an introduction. We have an advertising program set up with a couple of radio stations so those contract would continue if you would like them too. I would suggest following with them, we got a great deal with them. This boutique is fully furnished and stocked with everything you will need; the building is 1200sq ft 800mo. Which is a amazing price!! We have already purchased the supplies you would need such as racks, 600.00 worth of racks. 500.00 worth of hangers. 200.00 worth of bags, tagging gun/tags/hooks 78.00. We have a computer cash register-combo, with the cash register consignment program all ready hooked up and running included in the price above for 1,200. These things are well over 3,500 to 5,000 new. Also, included is the credit card machine receipt printer, bar code scanner, printer fax,copyer combo. mannequins 78.00, mannequin bellys 60.00, 3mo belly for dressing rooms 100.00. Building signs made locally 200.00 each. Just these things alone not including shipping and handling on the items that were shipped you can see come to 3,216!! This does not include what we payed full price for the computer/cash register combo!!!!! We are including that at a quarter of the price it would be to buy it new. Product in the store which of course is included in the price above 1,035. This puts the total at 4251 now!!! This again I am not considering in shipping and handling. Some of the items we have put in the store I have not included in the above info, just for times sake, however, we would go over everything in detail. The boutique is fully furnished with chairs, stools, mirrors this is a clothing store so you need plenty of these. Dressing rooms which cost use about 500.00. posters, and pictures, paint and shelving around 200.00. We have a large shelving wall with removable racks and hooks, 150.00. There are several other items in the store not included above such as steamers, cards, displays, open and closed signs, and a childrens play area including toys, a open and close gate, and much more. Anyhow, as you can see we are not looking to make a ton of money here I have just had some health issues come up unexpected, and really cant run the store the way it should be. There is a great deal of profit to be made here really. The consignment idea has done very well. Woman are jumping at the idea of softly used maternity clothing. Not to mention having a place like this boutique to bring there clothing to after they are finished. Whoever, gets the store is going to do very well. I Will be sad to see it go honestly. But happy to know it will still be here doing well and giving us woman other options!!! If you would like to ask me any questions you may call me. No Emails!!!!! 369-2128. If you would like to come by just let me know and we can set up an appointment!!!!Thank you Location: missoula, montanaits NOT ok to contact this poster with services or other commercial interests

I have a large lot of office supplies from an office I cleaned out recently. There are all kinds of organizers, feet supports, bookends, keyboards, calculators, computer monitor filters and more. I dont have an exact count of how much I have, but there are literally hundreds of items.Please make an offer on one item or the whole lot. My suggested price is $1 for the organizers and bookends and $5 for the foot supports and filters, but make an offer I really need to get rid of this stuff. I will also consider trades for artwork, food (from a restaurant) or ?Call or email Shawn 327-5377 or deliverytruckplus@hotmail.com Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

I recently cleaned out an office and saved the items I thought might be useful to someone just starting a business or looking to upgrade your current office supplies. I havent taken an exact count of what I have, but the pics below are a sample of what I have to offer. You can make an offer on one item or the whole lot, I literally have hundreds of misc. items. My suggested price would be $1 apiece for the organizers and bookends and $5 apiece for the feet supports and computer screen filters. But feel free to make an offer on anything! I need to get rid of these items. I will also consider trades for old signs, building materials, tools, old cars, motorcycles, whatever. I prefer to deal locally unless you are willing to make an offer on the whole lot.Call or email me, Shawn 327-5377 deliverytruckplus@hotmail.com Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Mother Trucker FOR SALE. This business is a necessary cultural experience in Missoula. Do you have what it takes to own the Most Rockin Food Truck in Missoula, Montana???Price includes~Truck and all equipment (freezer, grill, fryer, sandwich bar refrigerator) 5000 watt generator, coolers, dishes, small wares, some inventory, recipes, operating manual, current food cost, filing system, a fantastic reputation and the wisdom of my many, learning experiences. Location: MisSOULa, Montanaits NOT ok to contact this poster with services or other commercial interests