38-Stihl MS 440 chainsaws. For more information call Kevin at 406-251-2221 or visit www.gardnersauction.com Location: Victorits NOT ok to contact this poster with services or other commercial interests

Older model Montgomery Ward stainless steel table saw. $70 O.B.O.Tel: 406-586-0919 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

One ton CM automatic hoist with 20 of heavy duty chain, 35 extension cord 115 power supply Call JD at 560-0068 for specifics Location: Anacondaits NOT ok to contact this poster with services or other commercial interests

KD Double flaring tool set. Used for flaring hydraulic lines and copper lines for refrigerators/coffee machines. Will handle up to .040 wall thickness tubing and SAE 45degree flares. For tubing sizes 3/16, 1/4, 5/16, 3/8 and 1/2. Very good condition set, price is negotiable. Location: Kalispellits NOT ok to contact this poster with services or other commercial interests

This is a nice little saw, works good, has a good plywood blade. Call 241-6467 for more info. Location: missoulaits NOT ok to contact this poster with services or other commercial interests

Good operating saw reasonable priced. Call 241-6467 for more info. Location: missoulaits NOT ok to contact this poster with services or other commercial interests

Performance driven. The all new TE 2-S combines working comfort with the power you need. With the best in class performance and tool life, it is ideal for drilling holes ranging from 3/16” to 3/4” into concrete, masonry and brittle materials like tile and stone.comes with many diffrent bits and 1/2 inch chuck adapter paid over 600 hundred everything. 300.00 cash * Click chuck and synchronized switch for high working comfort * Sturdy motor with high load rating for maximum reliability * Precision hammering feature for drilling into concrete and masonry as well as brittle materials like tile and stone * Fast and efficient drilling * Ideal for drilling holes ranging from 3/16\" to 3/4\" in concrete, masonry, tile and stone Location: victorits NOT ok to contact this poster with services or other commercial interests

Hardly used portable table saw still has original blade on it just dont have a use missing top plastic gaurd , cash only Location: Victorits NOT ok to contact this poster with services or other commercial interests

Craftsman 10\" Radial Arm saw, powerful and quality made, older but good condition. Comes with brand new uninstalled upgrade & retrofit kit incl. new deck etc. $60 OBO or trade for guns/ammo Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Cart for hauling and handling granite, marble or other types of slabs. Cart is on wheels and can be manually tilted onto its back to work as a table. I used this table for custting granite slabs and for working on concrete countertops. It has heavy duty wheels with locks and the table is made of steel. You can also use this cart/rack to move and work with lumber.Please reply via email. Location: Helenaits NOT ok to contact this poster with services or other commercial interests

Qty 8 New Metal cutting saw blades, Manuf. Bullard Abrasives,Inc. Model# A30R 14x1/8x1 5400max rpm• General purpose wheel formulated for Railroad track cutting• Main application – Main track, yard track, and rail steel• Secondary application – Hard steel, bar stock, I-beamsBullard Abrasibes, Inc.NO SHIPPING PLEASE, BUYER MUST PICK UP AND PAY WITH CASH. Location: Kalispell, MTits NOT ok to contact this poster with services or other commercial interests

Bought this generator a couple of months ago and no longer need it. It has only 0.10 hours on it, its brand new was only started to see how it worked. Asking $1000 . GENERAC 8000-Watt Portable Generator (CARB) 8000 Running Watts / 12,000 Starting Watts Includes electric start, hour meter, cord set, fold-down locking handles and maintenance kit. Generac 410cc OHVI Engine 9.0 gallon fuel tank with incorporated fuel gauge and filler neck screen Running Watts (Watts): 8000 Starting Watts (Watts): 12000 Engine Brand: Generac Engine Displacement (Cu. Centimeters): 410 Engine Torque (Feet/lbs.): 0.0 Engine Series: OHVI Fuel Capacity (Gallons): 9.0 Run Time at 1/2 Load (Hours): 10.0 Starting: Electric and Pull Wheel Kit: Yes Size of Tire (Inches): 10.5 Cord Set Included: YesType of Alternator: High Performance Control Panel: Yes Weight (lbs.): 186.0 Low Oil Shut Down: Yes Osha Required GFCI Outlets: Yes Fuel Gauge: Yes Hour Meter: Yes Automatic Idle Control: Yes Automatic Voltage Regulation: Yes Length (Inches): 32.5 Width (Inches): 23.0 Location: Corvallis,MTits NOT ok to contact this poster with services or other commercial interests

I have a brand new Speedaire Air Compressor by Dayton. Honda 8.0 HP, 2 stage compressor pump, 20 gallon, 175PSI. Brand new, never run. $1000 Possibly trade for car, truck, 4 wheeler............... Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

(1) used air compressor Speedair I believe is the name. 220 volt, 5hp, 60 gallon tank,9.5 cfm, works well looks like new. moved and dont have room for it. Location: missoulaits NOT ok to contact this poster with services or other commercial interests

Davis Wells horizontal mortiser. Great for dowelling. Normal used price: $750.00 - $1100.00. Location: Billingsits NOT ok to contact this poster with services or other commercial interests

electric quick finish power sanding block Location: Missoula, MTits NOT ok to contact this poster with services or other commercial interests

electric heat gun Location: Missoula, MTits NOT ok to contact this poster with services or other commercial interests

Craftsman 21\" Mulcher. Excellent Condition and works Great. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Snapper snow blower with 120V and pull start. This machine is in good shape, but does need a tune-up. Call Mike at 254-1422 or e-mail. Location: Billings, MTits NOT ok to contact this poster with services or other commercial interests

Honda push lawn mower. Top end machine with electric clutch for safe blade engagement. Needs tune-up. Call Mike at 254-1422 or e-mail. Location: Billings, MTits NOT ok to contact this poster with services or other commercial interests

Homelite Chainsaw with chain brake. This saw does need a tune-up. Call Mike at 254-1422 or e-mail. Location: Billings, MTits NOT ok to contact this poster with services or other commercial interests

miller bobcat 250 with only 16.2 hours on machine. comes with 50 stinger, 50 magnetic ground, two 50 extensions. this one also has the upgraded fuel injection for easy starts at the higher altitude. will throw in an auto darkening helmet, welding jacket, and some welding rod if this unit is sold by june 15th. call 406-580-8127 Location: bozemanits NOT ok to contact this poster with services or other commercial interests

38-Stihl MS 440 chainsaws. For more information call Kevin at 406-251-2221 or visit www.gardnersauction.com Location: Victorits NOT ok to contact this poster with services or other commercial interests

This saw is a used Rancher 55 that runs good. It will come with a case, 2 chains, file, and tool. The motor is 53cc and the saw has a 20\" bar. I believe it is a 2000 model. $275 or best offer.Please call: 406-949-2993 Location: Dillon, MTits NOT ok to contact this poster with services or other commercial interests

Making room in my garage selling my Craftsman Radial Arm Saw 10 inch asking $75.00 Cash, I live in town in Helena if interested drop me an email. Thanks Location: Helena Montanaits NOT ok to contact this poster with services or other commercial interests

Making room in my garage selling my Craftsman 10 inch Table Saw I am asking $65.00 Cash if interested in taking a look, I live in town in Helena, drop me an email. Thanks. Location: Helena Montanaits NOT ok to contact this poster with services or other commercial interests

Brand new diesel generator, half price of list Walt @ 270-4408 Location: whitefishits NOT ok to contact this poster with services or other commercial interests

Use Porter Cable Laminate Trimmer. Used just a few times. Cash, local check or Paypal. Will ship (at buyers expense) if payment is made through Paypal. Location: Stevensville, MTits NOT ok to contact this poster with services or other commercial interests

Used JBI double filtration commercial spray booth. Air moves through booth at 125 FPM for efficient particulate removal. The booth is made of 18 gauge galvanized sheet steel. Comes with filters and hazardous light location light fixture that is a 48” 4-tube light; This unit also comes with an exhaust stack kit to mount in through the roof or wall and an 18” fan with motor. This unit retailed in Grainger for over $4,000 … 8 years ago. A good value at $2,200. Please call 406-533-0406 Location: Montanaits NOT ok to contact this poster with services or other commercial interests

110v Table saw............$125110v Scroll saw............$50220v 10Gal Air Compressor..............$100Painted Steel compact truck Tool Box............$50 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Echo Model 280E chain saw. 12\" bar, extra chain, case. Starts easy, runs good. Location: Superior/St. Regisits NOT ok to contact this poster with services or other commercial interests

Jet Table Saw Gold Series1 1/2 hp belt driven30\" measured slide fencecast iron top with steel wings, dust bag & rolling base.Used very little and was around $1000 with the extras new, will sell for $600406-260-5658 or 406-837-2448 Location: Bigforkits NOT ok to contact this poster with services or other commercial interests

Wire Stretcher. $20 or offer406-587-9255406-581-8043 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Call JD for details at 560-0068Extra large, pull up front dooron coasterslike new Location: Anacondaits NOT ok to contact this poster with services or other commercial interests

For sale, Keene Industries Gold Dredge/sluice box with 3hp Briggs & Stratton Engine/Keene Pump, hoses included. E-mail with questionsThank you Location: Billings, MTits NOT ok to contact this poster with services or other commercial interests

For sale, Porter Cable 16\" Omnijig. Standard template for 1/2\" blind dovetails with 1/2\" doevtail bit, wrenches and router collet. In near new condition.E-mail with questions.Thank you Location: Billings, MTits NOT ok to contact this poster with services or other commercial interests

Model P3314 chainsaw w/14\" bar. You can check out specs on Poulan website or Kmart website. New in box. Local and cash or Paypal only please. Thanks Location: missoulaits NOT ok to contact this poster with services or other commercial interests

WELL BUILT CAR DOLLY WITH ELECTRIC BRAKES, TIRE TOW STRAPS, WHEEL COVERS. HAS VERY GOOD TIRES AND SPARE. CENTER SWIVEL.6 ROUND PLUG WITH A 4 FLAT PIGTAIL TO THE TOW VEHICLE. ASKING $650,OBO. PLS CALL 406-855-9488 IF INT. THANKS,,JD Location: BILLINGSits NOT ok to contact this poster with services or other commercial interests

I have a 60 gallon Kobalt air compressor that I have only use a couple of times. It is in excellent condition and still on the pallet so its easy to move. The specs are 3.5 running hp and 7hp peak, 10.8 scfm @ 90psi and 12.2 @ 40psi. Location: missoulaits NOT ok to contact this poster with services or other commercial interests

  Color: Midnight Misty Blue with matching strutsEngine: OHV 45-degree V-Twin 1916cc (117ci)Transmission: Baker 6-speed 1.125 inch belt driveCondition: 1691 miles short of brand new Rake: 37 degreesTires: front 90x21 --- rear 240x18Length: 104 inchesWeight: 653 lbsClearance: 4.5 inchesSeat Height: 25 inchesFrame: 1.5 inch tubingWheelbase: 77.5 inchesFuel: 3.4 gal (4 reserve)Ignition: electronic single fireCompression Ratio: 9.6:1Suspension: front 41mm telescopic --- rear hidden shocksVIN: 5J11NBJ186W000147Vehicle title: ClearEngine size: 1916 ccExterior color: Blue The bike was garaged its entire life and never laid down. It is in perfect condition. The Chopper model is no longer being offered by Big Dog.This bike in this color is not easy to come by. I am selling for financial reasons and will miss this bike dearly. It is a masterpiece of art & engineering and is incredibly easy to ride.  President Obama left open the door to creating a commission to investigate the Bush administrationTo the residents of the former mill town of West Point Ga the opening of a Kia plant later this year is heaven-sentdcsMultiTrack(DCS dcssip www nytimes com DCS dcsuri /nytextratoggletoBR html WT ti nytextratoggletoBR WT zPresident Obama left open the door to creating a commission to investigate the Bush administration Location: Montanaits NOT ok to contact this poster with services or other commercial interests

i have a poney torch with all wellding tips 2 cutting heads 2 gas cylenders 2 orginizors all bottles are full as i just filled them i will take offers Location: helenaits NOT ok to contact this poster with services or other commercial interests

Six Bessey multigrip clamp/pliers, excellent for woodworking, welding, plumbing, mechanical. Sell new for $32.50, $120.00 for all six, or $25.00 if sold seperately Location: Helenaits NOT ok to contact this poster with services or other commercial interests

Metal Haven SnapOn Tool Box. Model number KRL7002APGS. Roller berring slides and drawer liners. Box is in excellent shape. 28\" Deep54\" Wide41\" TallCall Dave 227-5933 Location: East Helenaits NOT ok to contact this poster with services or other commercial interests

Engine stand for sale for $35.00 Cash if interested please drop me an email, I live in town in Helena thank you. Location: Helena Montanaits NOT ok to contact this poster with services or other commercial interests

22 gallon air compressor with 5hp motor. I have only used it to pump up tires and things like that so it has been used very little and is in excellent condition. Location: missoulaits NOT ok to contact this poster with services or other commercial interests

(Alder 30-50) long arm sewing machine. sews light leather. extra thread and needles. in great shape sews great. asking $800.00 Cash Sell only.. Call 406-781-6312 for more info. Location: Greatfallsits NOT ok to contact this poster with services or other commercial interests

6000 lb rotory lift works very well 120 volt $500.00 406 261 8853 Location: whitefishits NOT ok to contact this poster with services or other commercial interests

I have a brand new Speedaire Air Compressor by Dayton. Honda 8.0 HP, 2 stage compressor pump, 20 gallon, 175PSI. Brand new, never run. $1000 Possibly trade for car, truck, 4 wheeler............... Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Lot of misc. Hand Tools-2 craftsmen pry-bars-1 set of craftsmen screw extractors-1 rechargable craftsmen screwdriver-1 craftsmen magnetic dish/tray-3 vise grips-2 kobalt \"vise grips\"- various screwdrivers large and small- black and decker ratcheting screwdriver set- set of spade drill bits-misc. exterior screws-plyers, side cuts- lixie 1.25\" dead blow hammer- ball pean hammer-and morecall 812-371-2672 Location: billingsits NOT ok to contact this poster with services or other commercial interests

I have a John Deere 51SV chain saw I received from my father-in-law. Its the same saw as an Echo 510. It starts and runs, but has low compression and bogs down pretty easy. I think some new rings are in order. Rings are still available. The starter cover is cracked, as is the rear handle. Good chain and 20\" bar. Fix or use for parts. Please call 586-1426. Thanks Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

2003 John Deere Compact Tractor Mower Loader BackhoeSerial Number: LV4110H210622 Hours: 262 Drive: 4WD Description -- 2003 John Deere Compact Tractor - Model 4110 - 3 Cylinder Diesel - 21 HP, 4 Wheel Drive, R4 Tires, Hydrostatic Transmission, John Deere Quick Detach 410 Loader - 61\" Bucket. I purchased New on April 18 2003. Also included is a John Deere 60\" Heavy Duty mower deck (belly mount mower) purchased New April 18 2003. John Deere 46 Quick Detach Backhoe. Reach from center line of swing pivot is 101 in. Digging depth 78 in. Backhoe purchased New on July 18 2007. As you can see it has its own frame that mounts to the tractor frame, not one of those that mounts to the 3-point hitch and slops around. Mower deck has approximately 200 hrs and backhoe has only around 20 hrs tops. Tractor has 262 hours. Everything works as it should, is in excellent condition, fully operational, and run great. All hardware to attack mower included as well as 3 - point hitch. Loader and Backhoe will detach or attach in 5 minutes, belly mower in 5 to 10 minutes. Again I am the origional owner and purchased everything New. All has been Maticously maintained according to owners manual maintenance sheets. Also all manuals for everything listed are included.Intel Core2 Duo processor T L and U 7000 sequence3 45nm Intel Core2 Duo processor T8000 and T9000//upload wikimedia org/wikipedia/commons/thumb/6/6d/SIF-Beehive-3-Cropped jpg/50px-SIF-Beehive-3-Cropped jpg width26 The Home Office and the Forensic Science Service considers that the lowest level of muzzle energy capable of inflicting a penetrating wound is one foot pound force (1 35 J)The fort is almost in square form and has two gates It contains a mosque made up of three big dome shaped rooms There is also a quadrangular building with a dome Along the wall there are additional small roomsits NOT ok to contact this poster with services or other commercial interests

Almost NEW Arco Electric 3-Phase Roto-Phase Converter (Model B). 230 Single Phase Input - 230 Three-Phase Output. 4HP Minimum Motor Size - 10HP Maximum Motor Size - 25HP Combination of Motors. This was purchased NEW from the power company and used only about 10 hours before I moved to a new location that already had 3-phase in place. The unit is COMPLETE with starter control panel switch and 3-phase output box. This unit has been stored in a good environment for 2 years. The current price for a new unit is much more than I am asking. I have over $2,000 invested, but will sell for $1,500 OBO. Contact Dale by Email or call 406-961-4817 or 406-961-4195 Location: Corvallisits NOT ok to contact this poster with services or other commercial interests

10 inch craftsman radial arm saw $ 150 call 406-458-8841 Location: Helenaits NOT ok to contact this poster with services or other commercial interests

Valve Grinding Machine Mach. # 680 Quick chuck / uses oil / lots of ex. grinding wheels works great !! Location: Billings Mtits NOT ok to contact this poster with services or other commercial interests

Pallet Master Band Saw - 220 Single Phase. Will saw cants up to 7\" thick and 6 long. $2,500 OBO. Contact Dale by Email or call 406-961-4817 or 406-961-4195. Location: Corvallisits NOT ok to contact this poster with services or other commercial interests

Hitachi 10HP 3-Phase Band Saw. 4\" wide blade; Brand new motor. $2,000 OBO. Contact Dale by Email or call 406-961-4817 or 406-961-4195. Location: Corvallisits NOT ok to contact this poster with services or other commercial interests

I have an 8 length of bowling lane for sale that would make a great work bench. It is southern yellow pine laminated together with a maple edge. The wood is over 2\" thick and very solid. Location: Columbia Fallsits NOT ok to contact this poster with services or other commercial interests

Make:  BobcatSerial Number:  521316336Model:  S250 TURBOOperating Load:  2,501 - 2,600 lbsModel Year:  2003Operating Weight:  4,501 - 5,000 lbsHours:  2019Net Horsepower (HP):  75Engine Fuel DieselHorsepower 75 HPEngine Cooling LiquidTurbocharged Engine truePerformanceRated Operating Capacity (SAE) 2500 lbsROC with Counterweight Option 2600 lbsTipping Load 5000 lbsOperating Weight 7723 lbsTravel Speed 6.9 mphTravel Speed (2-speed option) 12 mphCapacitiesFuel Tank 25 galHydraulic SystemPump Capacity 20.7 GPMAuxiliary Std Flow 20.7 GPMAuxiliary High Flow 37 GPMDimensionLength 142.9 inLength with Standard Bucket 142.9 inWidth 72 inWidth (with bucket) 74 inHeight 80.9 inHeight with Operator Cab 80.9 inHeight to Bucket Hinge Pin 126.4 inReach @ Maximum Height 34 inTurning Radius 84.2 inWheelbase 48.8 in message which requests the sender to decrease the traffic rate of messages to a router or host This message may be generated if the router or host does not have sufficient buffer space to process the request or may occur if the router or hosts buffer is approaching its limitOnce again a lightship was stationed off the point this time staying on station until 1897 In that year the existing caisson light was first illuminated The plans forold and valuable printings (SIAWD) is one of the five largest collections of historical block printing of the world As an independent collection it has existed since 1995 and ranks thereby among the youngest of the National Library The collection covers approximately 8 000Twenty-nine shooters represented Sweden in 1920 It was the nations third appearance in the sport Johansson won the nations only gold medal of the year in the 600 metre prone military rifle as well as being on two of the medal-winning teams In all Sweden gathered ten medals third-most of any nation in 1920 The six silver medals were the most of any country Location: Montanaits NOT ok to contact this poster with services or other commercial interests

Brand new tool belt. Set up as an electrician tool belt but could be used for any construction type. Brand new never used. Cost was over $100.00. Ended up using another belt that worked better for me. Come with suspenders. call 406-860-7095. 25.00 cash only Location: Billings Mt.its NOT ok to contact this poster with services or other commercial interests

Very nice snapper mower. Hi Vac model, 7 H.P. Self proppeled with variable speed it even has a cup holder. This mower is practically brand new and sells for $650 new. I have another mower and my yard is too small to justify a mower like this, so it has to go. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Black Sand Abrasive GrinderImproved design with long lasting grinding disks, plus valve discharge for controlling fineness. Works best with wet vac or barrel recovery. 5 HP 1 Phase 110/220 VAC TEFC Motor. $3995Impact Grinder12\" Hammer. Improved design grinds to 20 mesh. Long lasting stainless steel breaker bars. Grinds wet or dry. 5 HP 1 Phase 110/220 VAC TEFC Motor. $3995For Orders or Information Contact Mike at 541-869-2375 Location: Eastern Oregonits NOT ok to contact this poster with services or other commercial interests

We have a 18 Volt 1/2 inch drill and a 5 inch skill saw, 2 batteries and charger and case, all work great, Downsizing. Location: 35 Miles East of Missoulaits NOT ok to contact this poster with services or other commercial interests

High performance wet- dry shop vac. Works good just very loud. Thanks Location: missoulaits NOT ok to contact this poster with services or other commercial interests

Snap-On Torque Wrench TQR600E Model 200-600 lbs. In Red Snap-on Case Price: $400obo Email or Call 406/542-6606 for more details.No trades please! Local, cash only deals! Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Stihl MS441 Magnum Professional Chain Saw 70.7cc Engine Displacement 5.5 bhp Engine Power 25 Bar Price: $600oboSaw has been used. Good condition. Sharp chain! Email or call 406/542-6606 for more details.No trades please! Local, cash only deals! Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

3 in 1 machine Must pickup too heavy for delivery as new paid $2650.00 sell for $1950.00. See pictures for all information. Location: Three Forks, MT.its NOT ok to contact this poster with services or other commercial interests

Make reasonable offers on these tools that are in great shape. We dont need them anymore. If you are even looking at this ad you probably know what this stuff cost new so dont lowball me on the price. Make a reasonable offer on one tool or the whole lot. I will be passing thru Missoula on Friday June 12th. Cash only and please dont waste my time if you arent going to buy. Everytime I list on here I get 400 replys but nobody can seem to follow thru. Just make a decent offer and buy it. 1/4 ratchet, 3/8 ratchet, 3/8 impact, air drills, and cutoff wheel. Location: Vaughnits NOT ok to contact this poster with services or other commercial interests

PRICE REDUCED, come get them today only for this price, One 110 mig with wire like new, One arc AC welder with rod, both work great I need Money today, call marc at 406-563-0247 or my cell 406-490-9655. Thanks Marc Location: Anacondaits NOT ok to contact this poster with services or other commercial interests

Earthquake Power Earth Auger E43 with 8\" Auger, 43cc, Runs Great. 696-5516 Location: Laurelits NOT ok to contact this poster with services or other commercial interests

Big Cat Red Lion Portable Cement Mixer, 4.9 amp, 1/3 hp. Runs good. 696-5516 Location: Laurelits NOT ok to contact this poster with services or other commercial interests

This is a new in box air ratchet Campbell Hausfeld. Torque: 18 ft.lbs. scfm: 3.2 avg. @ 90psi. Location: Billings, MTits NOT ok to contact this poster with services or other commercial interests

Ditch Witch - case-Davismini sneaker attachment, cablesJohn Deere 4 snow blower attachedCall 406-821-0244. No email please. Location: Darbyits NOT ok to contact this poster with services or other commercial interests

in good working condition, was going to use it for replacement on my compressor, but decided not to.. also have a 1/3 hp made by franklin electric-----$35 each or both for $60.........406-208-8962 Location: billingsits NOT ok to contact this poster with services or other commercial interests

Reduced Again!!!! $7000.00 For the Lot Way to many tools to take pics of!!! Take advantage of my loss ! Very motivated seller! Most these tools are in like new condition! Hurry now and dont let this pass you by! Here is a detailed list of tools with model #..... 2- Speed Heavy - Duty Wood Shaper Delta Model # 43-460 Misc cutter heads for wood shaper Deluxe Shaper Fence Delta Model # 43-801 Versa Stock Feeder Delta Model # 36-865 .........................new over $3500 in..........................................will take $2300.00 OBO10 \" Powermatic Arbor Saw Model # 2688111 5hp 3 phase with Accu Fence ......new over $3000..........will take $2300.00 OBOExcalibur Sliding Table Model # EXSLT60 ............................................new $900.........................................will take $500.00 OBOJet Bandsaw Model # JWBS-14OS...........................................................new $900.........................................will take $500.00 OBO Jet Edge Horizontal Vertical Sander Mode # EHVS-80.........................new $1300.........................................will take $750.00 OBO Puma 6 HP 60 Gal Air Compressor ............................................................new $500.........................................will take $350.00 OBODelta Bench Oscillating Spindal Sander Model # 31-780.......................new $300.........................................will take $150.00 OBO Dewalt 12\" Compound Miter Saw ............................................................new $380..........................................will take $200.00 OBOGee Tech 15\" Auto Feed Floor Planer 3 phase 3hp Paid ....................new$1329.95 .....................................will take $700.00 OBOfloor model drill press...brand new in box ...............Three phase power converter with complete switch board and wireing ......................................................will take $700.00 OBO2 Porter Cable Routers one plunge and one regular................................new $400.........................................will take $200.00 OBOporter cable face frame cut out machine ...................................................new $1400.......................................will take $700.00 OBOcastle machine face frame cut out..............................................................new $1000........................................will take $500.00 OBOdoor hindge cut out machine ...............................................................................................................................will take $400.00 OBOcouple of air palm sanders ....................................................................................................................................will take $50.00 OBOthree air nailers two senco and one accuset pinner..........................................................................................will take $100.00 OBOhandful of Quick Grip hand clamps pile of pipe clamps...................................................................................will take $300.00 OBODelta Tenoning Jig Model # 34-183 ...................................................................................................................will take$100.00 OBOchest full of door hindges, drawer guides, knobs etc etc et ............................................................................will take $100.00 OBOPlease inquire and I can expound or send pics or arange a showing! These tools are sitting in storage till the sale goes through... I have most paperwork and owners manuels for the machines.........Only serious inquiries please! Will make better deals the more you buy. The more you buy the more you save!!!Thanks John Location: Corvallis MTits NOT ok to contact this poster with services or other commercial interests

One ton CM automatic hoist with 20 of heavy duty chain, 35 extension cord115 power supplyCall JD at 560-0068 for specifics Location: Anacondaits NOT ok to contact this poster with services or other commercial interests