Used JBI double filtration commercial spray booth. Air moves through booth at 125 FPM for efficient particulate removal. The booth is made of 18 gauge galvanized sheet steel. Comes with filters and hazardous light location light fixture that is a 48” 4-tube light; This unit also comes with an exhaust stack kit to mount in through the roof or wall and an 18” fan with motor. This unit retailed in Grainger for over $4,000 … 8 years ago. A good value at $2,000. Please call Brian at 406-533-0406 Location: Whitehallits NOT ok to contact this poster with services or other commercial interests

All the tools work fine and the batteries hold a good charge.Here is what is included:1 Large Carrying Case. It has 4 side pockets and wheels for rolling. All of the tools fit inside the large compartment.1 Skill Saw (used and the blade has some wear)1 Sawsall Saws All (used some)1 Chainsaw (never used as best as I can tell)2 18 Volt Batteries1 Dual Charger3 Tool Clips (hook into where battery does for hanging tools)1 Jigsaw Saber Saw 1 Flashlight1 Hand Vac VacuumPlease call Brad @ 750-3353 Location: Great Fallsits NOT ok to contact this poster with services or other commercial interests

Sears radial arm saw mod# 113.23100w/ stand (stand has lawn mower wheels & a handle attached)need a new plastic on/off switch but you can still work the old one$100.00 OBOscottequip@hotmail.com406-578-2061 Location: Wilsall, Mt*park county*its NOT ok to contact this poster with services or other commercial interests

Hitachi NT 50AE 18 gauge with case,wrenches,manual and 1/4 hose fitting.EX.condition. Location: Steviits NOT ok to contact this poster with services or other commercial interests

This sewing machine is in great shape it is a Tredle machine.Call 406.360.0990 Location: Victorits NOT ok to contact this poster with services or other commercial interests

Otto Kennedy large Drill Press for sale. $395.00 OBO. 3 phase. Easy to change motor. Can be seen at the Axmen 7655 Hwy 10 West Missoula, Montana or call 728-7020 Location: MISSOULAits NOT ok to contact this poster with services or other commercial interests

I have a brand new 18v DeWalt (DC390) circular saw and a new 16.6\" framing blade. Never been used. Plus a 18v XRP Dewalt battery which has also never been used. I will also throw in a 18v DeWalt (DW919) work light, again, never been used. I do not have a charger for these tools or a case. Thanks for looking!!! Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests

This is to small to run the AC on my camper. Runs good just have a tuneup and plug installed. Location: Helenaits NOT ok to contact this poster with services or other commercial interests

Sturdy nice work bench. Joined the Navy so just starting to sell stuff I will no longer need.Just over 6½ft wide, 2½ deep, 3½ tall. Has a shelf underneath, pockets on each side on top to throw a tool in or stain can or clamps or whatever will fit really.I apologize for all the crap laying around it. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

36\" Power Trowel - Lever Adjustment for tilting blades.5-1/2 H.P. Honda engineOverall, this power trowel is in good condition, runs great, the blades are good.If you need more information on this power trowel, please contact me. Please email me with any questions.Thanks for looking,Gary Location: NW Montanaits NOT ok to contact this poster with services or other commercial interests

Power Hacksaw, Craftsman Drill Press, \"A\" Frame with chain fall, bench grinder, hand tools, come-along, etc. To be sold at Absolute Public Auction this Friday, July 17th starting at 10:00 AM. Located at 519 Montana Ave. East Missoula. Go to www.bobbyroshon.com for full ad and details. Location: East Missoulaits NOT ok to contact this poster with services or other commercial interests

Hole Saw blades&hand grinder parts. (2) 3/4\", 7/8\",1\", 1 3/16\", 1 3/8\", 2\" , (2) 2 1/8\". $10.00 503-706-9512 peter_built78@hotmail.com Location: Hamiltonits NOT ok to contact this poster with services or other commercial interests

Truck bed tool box. Flush mount type. Hasnt been in my truck for 2 years, sits in garage. Looks just like the one in the picture, but name brand says \"husky\" from Home Depot. Call Brian at 619-733-3447 (cell phone). Looking for $100 cash. Location: Billingsits NOT ok to contact this poster with services or other commercial interests

Pickup box trailer1-ton frame and axle with liftgateCall (406) 880-0457 Location: Victorits NOT ok to contact this poster with services or other commercial interests

10\" radial arm, runs good, comes with carbide Systamatic blade. Evenings 406-586-3706, Daytime 406-581-3706 Location: Bozema, MTits NOT ok to contact this poster with services or other commercial interests

Crosscuts up to 16 inches, excellent for siding, soffit, and framing work. Comes with 2 blades. Evenings 406-586-3706 Daytime 406-581-3706 Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests

This is a Woodmaster 37\" double drum sander. It has two rotating drums, one in front of the other. It can be loaded with 2 different grits of sandpaper. The usual configuratuon is coarser on the front and finer on the rear. The sanding motor is 7 1/2 hp. The feed motor that sends the stock through is 1/4 hp. The feed motor has a reversing switch in place but I have not hooked it up. The feed is infinitly variable, a highly desirable feature to handle any type of wood or condition. It will feed at speeds that are quite fast to barely moving. It will flatten glued up panels, flush up assembled doors, sand parts etc. It will handle a 30 house door. It has a mobile base, and a few changes of paper. This machine is built like a tank with heavy steel framework. Separate motors for the feed and sanding insure that the power goes to the sanding drum. It is simple to adjust or true up if ever needed. It needs 220v service. If you are now sanding with a hand belt sander and a random orbit, this machine will open new worlds for you. Excellent service and parts (paper, velcro, advise etc) is just a phone call away. This is a great machine for the deticated amature shop or the professional shop on a budget Location: BOZEMANits NOT ok to contact this poster with services or other commercial interests

Very nice snapper mower. Hi Vac model, 7 H.P. Self proppeled with variable speed it even has a cup holder. This mower is practically brand new and sells for $650 new. I have another mower and my yard is too small to justify a mower like this, so it has to go. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Runs Great Location: Darbyits NOT ok to contact this poster with services or other commercial interests

Weatherhead Colto-Crimp II model T-410. Weatherhead cabinet with many fittings & dies. Aeroquip saw. This is a great deal at $1200. If you have any questions about this it can be seen at the Axmen, 7655 Highway 10 West, 3 miles west of the Missoula airport. Location: MISSOULAits NOT ok to contact this poster with services or other commercial interests

This is a Titan 440i Airless Paint Sprayer. This machine is only 1yr old, the previous only winterized it wrong, so it needs a repack. This is really inexpensive on these titans, and I would be willing to do it for anyone interested for the cost of the parts plus $20 labor. Which far less than the dealer would charge. It has a brand new Graco hose and contractor II gun, this retailed at $150 by its self. Im asking $450 OBO. Location: Loloits NOT ok to contact this poster with services or other commercial interests

Here is a Honda 7Hp pressure washer. Its been well maintained, runs, and works well. Asking $250.00 Location: Loloits NOT ok to contact this poster with services or other commercial interests

Target concrete saw. Model is a Deluxe 1855-3505 with blade. This unit runs good. Come on in to the Axmen and check it out. If you are interested call the Axmen at 728-7020 or stop by and see it. We are located 3 miles west of the airport at 7655 Highway 10 West. Our hours are Tuesday - Friday 8:30 to 5:30 and Saturday 9:00 - 2:00. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Excellent condition 8 speed, 23 inch cut, 5 hp Location: polsonits NOT ok to contact this poster with services or other commercial interests

10\" Hitachi table saw Like new Location: polsonits NOT ok to contact this poster with services or other commercial interests

I have two brand new Wedco 5 gallon jerry cans. These are high quality, tight sealing gas cans, not the leaky CARB compliant ones the government wants you to use. If interested, please call or email. 586-1426 Thanks Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Radial Arm saw, used very little (still has original blade), Set up on casters. Needs a new wood table top because the back piece is missing. Give me a call 581-3458 Location: Belgradeits NOT ok to contact this poster with services or other commercial interests

fits 12\" wide tires any machine great shape great value 208-660-1216 Location: Ronanits NOT ok to contact this poster with services or other commercial interests

Craftsman 3HP, 15 gallon, permanently lubricated, model 167241 air compressor. Used very little, excellent condition. Serious inquiries please call Scott at 406-451-8096. $100 cash only, no holds. Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

This is a 7hp Briggs and Stratton pressure washer. It produces 300 psi and 2.8 gpm. It has low hours. It does need a new pressure washing gun/wand. They are available at Lowes and I figured I would let you decide what kind you wanted, they cost $25.00- $50.00I would like $150.00 OBO willing to deal.MTwoodguy @ (at) yahoo dot com Location: Kalispellits NOT ok to contact this poster with services or other commercial interests

I have for sale a beautiful Snapon CLASSIC 78 ULTRA YELLOW tool box w/wood top. Great condition cosmetically and all the drawers operate smooth as a swiss watch. This box lists for $4,250 + $372 for the wood top on the Snapon website. here is the link.......http://buy1.snapon.com/catalog/item.asp?P65=&tool=storage&item_ID=74165&group_ID=19507&store=snapon-store&dir=catalogLocal buyers I will deliver for free. For an extra $50, I would deliver as far as Missoula. Location: FLATHEAD VALLEYits NOT ok to contact this poster with services or other commercial interests

This year-old oil-lubed compressor has less than 5 hrs use. Price includes a 50 hose, and some attachments. It works great but I inherited a 12-gal compressor recently from my wifes uncle. I can be reached at 728-8546. Location: missoulaits NOT ok to contact this poster with services or other commercial interests

Jet mini wood lathe with Great Neck knife set. Excellent Condition! Location: Blgsits NOT ok to contact this poster with services or other commercial interests

older craftsman table sawworks greatmake me a resonable offerthanks406.799.4973 Location: great fallsits NOT ok to contact this poster with services or other commercial interests

This scissor lift is only 32\" wide and has a maximum platform height of 20 feet. The batteries were replaced within the last 6 months and it has a new deck. Thank you for your interest,Jay Powell406-880-5143 Location: Hamilton, MTits NOT ok to contact this poster with services or other commercial interests

38-Stihl MS 440 chainsaws. For more information call Kevin at 406-251-2221 or visit www.gardnersauction.com Location: Victorits NOT ok to contact this poster with services or other commercial interests

One ton CM automatic hoist with 20 of heavy duty chain, 35 extension cord 115 power supply Call JD at 560-0068 for specifics Location: Anacondaits NOT ok to contact this poster with services or other commercial interests

Franklin Foundry 37\" Wood Lathe. $100 or offer406-587-9255406-581-8043 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Wire Stretcher. $20 or offer406-587-9255406-581-8043 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Honda EU1000I Generator 1000 watt. Less than 20 hours on unit. Great for camping or running small tools and appliances. $650.00 O.B.O Cash only please. Tom @ 406-546-2213 Location: lOLOits NOT ok to contact this poster with services or other commercial interests

19hp Koehler Courage Engine42\" Side Discharge Deck597cc3 Year Limited WarrantySave $150!! Location: Libbyits NOT ok to contact this poster with services or other commercial interests

Stone Smooth Operator Power Trowler CF-364. 5.5hp B&S engine with 4-36\" blades. Trowel is in good condition and works great. Email or call 406-542-6606. No trades please, local cash deals only! Price: $995 Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Stihl MS441 Magnum Professional Chain Saw 70.7cc Engine Displacement 5.5 bhp Engine Power 25 Bar Price: $600obo Saw has been used. Good condition. Sharp chain! Email or call 406/542-6606 for more details. No trades please! Local, cash only deals! Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

DeeZee Truck Tool Box Competitor Series (Deep) Like New! Fits full size pickup box. Comes with keys for locks and sliding trays. Excellent condition. Price: $275obo Call 406/542-6606 or email for more details. No trades please! Local, cash only deals! Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

2= coleman powermate contractor compressors. 5.5 briggs&stratton. both will run with little work. $300.00....thanks call...406-239-1357 Location: missoulaits NOT ok to contact this poster with services or other commercial interests

Used JBI double filtration commercial spray booth. Air moves through booth at 125 FPM for efficient particulate removal. The booth is made of 18 gauge galvanized sheet steel. Comes with filters and hazardous light location light fixture that is a 48” 4-tube light; This unit also comes with an exhaust stack kit to mount in through the roof or wall and an 18” fan with motor. This unit retailed for over $4,000. A rare find and good value at $2,000. Please call 406-533-0406 Location: Whitehallits NOT ok to contact this poster with services or other commercial interests

MILLER DIAL ARC STICK WELDER AND CART AND 2/0 CABLE AND GROUND CLAMP 220 AMP Location: HELENAits NOT ok to contact this poster with services or other commercial interests

20 INCH RBI PROFESSIONAL SCROLL SAW AND STAND AND NUMERIOUS BLADES GREAT CONDITION Location: HELENAits NOT ok to contact this poster with services or other commercial interests

GRIZZLY 6\" X 48\" BELT SANDER WITH A 12INCH DIAMENTER FACEING SANDER VERY GOOD CONDITION. BELTS INCLUDED. Location: HELENAits NOT ok to contact this poster with services or other commercial interests

DeWalt Heavy Duty 10\" Compound Miter Saw with Electric Brake. Box never been opened...never been used. $250 obo. Location: Great Falls, MTits NOT ok to contact this poster with services or other commercial interests

Great Kargo Master Lumber Rack that came off my 2006 long bed crew cab chevy, 2\" tubing, rear window guard, its in great shape. local dealer says new price would be $1,000.00 to $1,100.00. Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Used Makita 7 1/4\" Worm Drive Circular SawWorks greatSee Photo Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Ryobi 18 volt Stapler, battery not includedWorks great $15.00 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Cummins made..used for maybe a week to move trailer houses..comes with plastic case..sold new for $199..firm price Location: Laurelits NOT ok to contact this poster with services or other commercial interests

Jet wood lathe model 1236 with 3/4 HP variable speed motor. Great condition. I will let it go for $475 (we are moving) - Sells new for $769.Features: JET 12\" x 34-1/2\" 3/4 HP Woodworking Lathe* Heavy-duty cast-iron lathe bed adds stability while limiting vibration* Headstock pivots 90° and locks to facilitate outboard turning* Reeves drive pulley system allows quick variable speed changes from 550 to 3,000 RPM* The bed is specially designed to allow easy positioning of the outboard turning tool rest* Heavy-duty cast-iron headstock and tailstock provide rigidity and strength for long tool life* Hollow tailstock lets you perform long hole boring operations* Variable-speed spindle includes six pre-positioned selections with positive detents to quickly set speed to the most common requirements* Locking control levers quickly and securely position the tool rest* Heavy-duty 3/4 HP single phase induction motor with industrial controls provides smooth, consistent power during use* Heavy-duty steel open stand provides support and stability to the tool for better resultsThe JET 708352 Includes:* 12\" x 34-1/2\" 3/4 HP Woodworking Lathe - 708352* 12\" Tool Rest* 6\" Face Plate* Spur Center* Live Center Location: Laurel, MTits NOT ok to contact this poster with services or other commercial interests

Lincoln \"Vantage 300\" welder with low hours, Diesel Kubota elec start, S.S. cover. Have sufficient welding equipment to set-up a mobile welding unit: including Flatbed with lockable storage, designed for crew-cab truck, Air Compressor - Champion with gas engine and elec. start, Lincoln LN 25 wire feed and many more items. All items have been in storage since my sons death in late 2007. I can email photos of equipment and price list. Prefer to sell as package Location: Helenaits NOT ok to contact this poster with services or other commercial interests

Stone Smooth Operator Power Trowler CF-364. 5.5hp B&S engine with 4-36\" blades. Trowel is in good condition and works great.Email or call 406-542-6606. No trades please, local cash deals only!Price: $995 Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Stiletto TB11 15 framing hammer with changeable head. All offers considered. Location: KALISPELLits NOT ok to contact this poster with services or other commercial interests

Selling my Team Mechanix 1500 LBS Motorcycle/ATV Jack asking $35.00 Cash If interested drop me an email. Thanks. Location: Helena Montanaits NOT ok to contact this poster with services or other commercial interests

Stihl MS390 chainsaw with 25\" bar. Less than 1 yr old - under warranty. Only 6 -7 tanks of gas used through this machine. Excellant / new condition. Professionally customed tuned for highest efficiency / power. Paid $489.00 asking $375.00 firm. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests

Complete set of molding cutter heads and mounting blade that they attached too. Just viewed a 15 piece set on sears.com with only 15 pieces and they were $130.00 without the mounting blade the cutter heads attached to. This is a 25 piece set. Only used one set of heads to make some beaded molding. All the other are new in excellent condition, including the beaded molding heads.See link from searshttp://www.sears.com/shc/s/p_10153_12605_00924023000P?keyword=shaping+tools Location: Great Falls/Helenaits NOT ok to contact this poster with services or other commercial interests

This is an older McCulloch 3000 watt generator. It has a 7hp briggs motor and runs 110/220. Its a little louder than the new ones, but works great!Thanks for looking! Location: Helenaits NOT ok to contact this poster with services or other commercial interests

Reduced Again!!!! $4400.00For the Lot Way to many tools to take pics of!!! Take advantage of my loss ! Very motivated seller! Most these tools are in like new condition! Hurry now and dont let this pass you by! Here is a detailed list of tools with model #..... 2- Speed Heavy - Duty Wood Shaper Delta Model # 43-460 Misc cutter heads for wood shaper Deluxe Shaper Fence Delta Model # 43-801 Versa Stock Feeder Delta Model # 36-865 .........................new over $3500 in..........................................will take $2000.00 OBO 10 \" Powermatic Arbor Saw Model # 2688111 5hp 3 phase with Accu Fence ......new over $3000.......will take $2000.00 OBO Excalibur Sliding Table Model # EXSLT60 ............................................new $900........................................will take $500.00 OBO Jet Bandsaw Model # JWBS-14OS...........................................................new $900.......................................will take $500.00 OBO Jet Edge Horizontal Vertical Sander Mode # EHVS-80.........................new $1300......................................will take $750.00 OBO Puma 6 HP 60 Gal Air Compressor ............................................................new $500..............SOLD...............will take $350.00 OBO Delta Bench Oscillating Spindal Sander Model # 31-780.......................new $300........................................will take $150.00 OBO Dewalt 12\" Compound Miter Saw ............................................................new $380.........................................will take $200.00 OBO Gee Tech 15\" Auto Feed Floor Planer 3 phase 3hp Paid ....................new$1329.95 ....................................will take $700.00 OBO floor model drill press...brand new in box ...............................................................................SOLD...............will take $75.00 OBO Three phase power converter with complete switch board and wireing .....................................................will take $700.00 OBO 2 Porter Cable Routers one plunge and one regular................................new $400...............SOLD...............will take $200.00 OBO porter cable face frame cut out machine ...................................................new $1400......................................will take $700.00 OBO castle machine face frame cut out..............................................................new $1000.......................................will take $500.00 OBO door hindge cut out machine ..............................................................................................................................will take $400.00 OBO couple of air palm sanders ..........................................................................................................SOLD..................will take $50.00 OBO three air nailers two senco and one accuset pinner................................................................SOLD................will take $100.00 OBO handful of Quick Grip hand clamps pile of pipe clamps..........................................................SOLD...............will take $300.00 OBO Delta Tenoning Jig Model # 34-183 ...................................................................................................................will take$100.00 OBO chest full of door hindges, drawer guides, knobs etc etc et ...........................................................................will take $100.00 OBO three hand sanders ....one orbital and two regular............................................................................................will take $25.00 OBO for all three Please make reasonable offers on tools interested in! Will consider seriously anything!!!!! Please inquire and I can expound or send pics or arange a showing! These tools are sitting in storage till the sale goes through... I have most paperwork and owners manuels for the machines.........Only serious inquiries please! Will make better deals the more you buy. The more you buy the more you save!!! Thanks John Location: Corvallis MTits NOT ok to contact this poster with services or other commercial interests

10-inch Craftsman Table Saw with diamond blade. $150/OBO. 406.727.3310. Location: Great Fallsits NOT ok to contact this poster with services or other commercial interests

Homelite chainsaw runs good asking $150.00 obo For more information You can contact me at 406-362-4361 or at shortbusboy@live.com Location: Lincolnits NOT ok to contact this poster with services or other commercial interests

Oversize tool box. 27inches from front to back. Aluminum diamond plate 406-362-4970/406-459-7836 Location: lincolnits NOT ok to contact this poster with services or other commercial interests

nice tool box for sale full of tools I need $1200.00 for it the air compresser is nice but needs some work I will send pics if you want to see it just let me know 1200.00 for both tool box and air compresser because I need a truck and I will trade for a ford f250 ext cab long bed truck must run and be a good truck with clean title. call for more info 406-451-9813 or email me at edwardrudd@rocketmail.com Location: bozeman,mtits NOT ok to contact this poster with services or other commercial interests

For sale a 28Volt Milwaukee Cordless Tool Kit. Model # 0928-29. This kit has been used twice and comes with 2 batterys, hamer drill, sawzall, skillsaw, flashlight, and carying case. I paid $850 for kit and will take $750 cash only. Location: Butteits NOT ok to contact this poster with services or other commercial interests

Qty 8 New Metal cutting saw blades, Manuf. Bullard Abrasives,Inc. Model# A30R 14x1/8x1 5400max rpm• General purpose wheel formulated for Railroad track cutting• Main application – Main track, yard track, and rail steel• Secondary application – Hard steel, bar stock, I-beamsBullard Abrasibes, Inc.NO SHIPPING PLEASE, BUYER MUST PICK UP AND PAY WITH CASH. Location: Kalispell, MTits NOT ok to contact this poster with services or other commercial interests

Used JBI double filtration commercial spray booth. Air moves through booth at 125 FPM for efficient particulate removal. The booth is made of 18 gauge galvanized sheet steel. Comes with filters and hazardous light location light fixture that is a 48” 4-tube light; This unit also comes with an exhaust stack kit to mount in through the roof or wall and an 18” fan with motor. This unit retailed for over $4,000. A rare find and good value at $2,000. Please call 406-533-0406 Location: Montanaits NOT ok to contact this poster with services or other commercial interests

Porter Cable 80 Gal Air Compressor$400 OBO406-580-0330 Location: Belgradeits NOT ok to contact this poster with services or other commercial interests

Snap On part Stock#: MHG5BAluminum Welding Spool Gun for MM140SL / MM250SL / MM350XL welders.I bought the spoolgun when I got the welder but have never used it and dont have aneed for it.I also have a full tank of argon Ive been told it will fit other welders by changing the electical plug????Snap On price is $1,320.90 and the argon and tank are valued at about $225.oo. Location: Kalispellits NOT ok to contact this poster with services or other commercial interests

Call JD for details at 560-0068 Extra large, pull up front door on coasters like new Location: Anacondaits NOT ok to contact this poster with services or other commercial interests

Simon 20 extension scissor lift! 250 pound capacity, 2-person with platform extension. Runs great! Electric or battery operated. Call JD at 560-0068 for specifics. Location: Anacondaits NOT ok to contact this poster with services or other commercial interests

ETQ Displacement Pump. Gasoline operated. Model #TP3200 CL-4 Suction 3\" --Discharge 3\" 264 gallons per minute 605 hp Like new, used twice! Call JD at 560-0068 for specifics. Location: Anacondaits NOT ok to contact this poster with services or other commercial interests