|
Title
|
Location
|
Compensation
|
Date/Time
|
Need to Sell - $2000 (Whitehall) (pic)
 |
Whitehall |
|
2009-07-16 12:55PM |
|
Used JBI double filtration commercial spray booth. Air moves through booth at 125 FPM for efficient particulate removal. The booth is made of 18 gauge galvanized sheet steel. Comes with filters and hazardous light location light fixture that is a 48” 4-tube light; This unit also comes with an exhaust stack kit to mount in through the roof or wall and an 18” fan with motor. This unit retailed in Grainger for over $4,000 … 8 years ago. A good value at $2,000. Please call Brian at 406-533-0406 Location: Whitehallits NOT ok to contact this poster with services or other commercial interests |
|
8 Piece Ryobi 18 Volt Tool Set Kit - $165 (Great Falls) (pic)
|
Great Falls |
|
2009-07-16 12:30PM |
|
All the tools work fine and the batteries hold a good charge.Here is what is included:1 Large Carrying Case. It has 4 side pockets and wheels for rolling. All of the tools fit inside the large compartment.1 Skill Saw (used and the blade has some wear)1 Sawsall Saws All (used some)1 Chainsaw (never used as best as I can tell)2 18 Volt Batteries1 Dual Charger3 Tool Clips (hook into where battery does for hanging tools)1 Jigsaw Saber Saw 1 Flashlight1 Hand Vac VacuumPlease call Brad @ 750-3353 Location: Great Fallsits NOT ok to contact this poster with services or other commercial interests |
|
radial arm saw sears 10" - $100 (Wilsall, Mt*park county*) (pic)
|
Wilsall, Mt*park county* |
|
2009-07-16 4:09PM |
|
Sears radial arm saw mod# 113.23100w/ stand (stand has lawn mower wheels & a handle attached)need a new plastic on/off switch but you can still work the old one$100.00 OBOscottequip@hotmail.com406-578-2061 Location: Wilsall, Mt*park county*its NOT ok to contact this poster with services or other commercial interests |
|
Hitahi Brad Nailer - $65 (Stevi) (pic)
|
Stevi |
|
2009-07-16 2:54PM |
|
Hitachi NT 50AE 18 gauge with case,wrenches,manual and 1/4 hose fitting.EX.condition. Location: Steviits NOT ok to contact this poster with services or other commercial interests |
|
Singer leather Sewing Machine Tredle - $1050 (Victor) (pic)
|
Victor |
|
2009-07-16 2:46PM |
|
This sewing machine is in great shape it is a Tredle machine.Call 406.360.0990 Location: Victorits NOT ok to contact this poster with services or other commercial interests |
|
8000 lb Upright Jack - $50 (billings,mt) |
billings,mt |
|
2009-07-16 2:13PM |
|
This is an 8000 lift capacity upright jack and is in good condition. Call me 8am - 8pm only (not later than 8pm) (406) 245-8299 Location: billings,mtits NOT ok to contact this poster with services or other commercial interests |
|
OTTO KENNEDY DRILL PRESS - $395 (MISSOULA) (pic)
|
MISSOULA |
|
2009-07-16 1:57PM |
|
Otto Kennedy large Drill Press for sale. $395.00 OBO. 3 phase. Easy to change motor. Can be seen at the Axmen 7655 Hwy 10 West Missoula, Montana or call 728-7020 Location: MISSOULAits NOT ok to contact this poster with services or other commercial interests |
|
DEW 18v Circular Saw + battery - $100 (Bozeman, MT) (pic)
|
Bozeman, MT |
|
2009-07-16 11:45AM |
|
I have a brand new 18v DeWalt (DC390) circular saw and a new 16.6\" framing blade. Never been used. Plus a 18v XRP Dewalt battery which has also never been used. I will also throw in a 18v DeWalt (DW919) work light, again, never been used. I do not have a charger for these tools or a case. Thanks for looking!!! Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests |
|
Coleman Generator - $225 (Helena) (pic)
|
Helena |
|
2009-07-16 11:38AM |
|
This is to small to run the AC on my camper. Runs good just have a tuneup and plug installed. Location: Helenaits NOT ok to contact this poster with services or other commercial interests |
|
snap on toolbox - $7000 (missoula) |
missoula |
|
2009-07-16 10:31AM |
|
2 month old 3 bay Black KRL 7023 toolbox like new hardly used no scratches forced to sell. Retails for over 11,000.00 Location: missoulaits NOT ok to contact this poster with services or other commercial interests |
|
a/c vacum pump comm - $1 (billings) |
billings |
|
2009-07-16 6:55AM |
|
make offer / trade 4 ? Location: billingsits NOT ok to contact this poster with services or other commercial interests |
|
New rigid plunge router - $150 (kalispell) |
kalispell |
|
2009-07-16 5:44AM |
|
Has never been used,in nice Rigid bag,paid over 200..,Mark 270-9092 Location: kalispellits NOT ok to contact this poster with services or other commercial interests |
|
Workbench For Shop - $50 (Missoula) (pic)
|
Missoula |
|
2009-07-13 11:20AM |
|
Sturdy nice work bench. Joined the Navy so just starting to sell stuff I will no longer need.Just over 6½ft wide, 2½ deep, 3½ tall. Has a shelf underneath, pockets on each side on top to throw a tool in or stain can or clamps or whatever will fit really.I apologize for all the crap laying around it. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Radial Arm Saw - $200 (Missoula) |
Missoula |
|
2009-07-13 10:08AM |
|
Sears radial arm saw for sale. Works great we just dont need this tool. Please call 529-2322 for more info or to come and look at the saw. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
3 Foot Power Trowel with 5.5 H.P. Honda Engine - $900 (NW Montana) (pic)
|
NW Montana |
|
2009-07-13 10:05AM |
|
36\" Power Trowel - Lever Adjustment for tilting blades.5-1/2 H.P. Honda engineOverall, this power trowel is in good condition, runs great, the blades are good.If you need more information on this power trowel, please contact me. Please email me with any questions.Thanks for looking,Gary Location: NW Montanaits NOT ok to contact this poster with services or other commercial interests |
|
Drill Press, "A" Frame Trolley (East Missoula) (pic)
|
East Missoula |
|
2009-07-13 9:40AM |
|
Power Hacksaw, Craftsman Drill Press, \"A\" Frame with chain fall, bench grinder, hand tools, come-along, etc. To be sold at Absolute Public Auction this Friday, July 17th starting at 10:00 AM. Located at 519 Montana Ave. East Missoula. Go to www.bobbyroshon.com for full ad and details. Location: East Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Hole Saw blades&hand grinder parts - $10 (Hamilton) (pic)
|
Hamilton |
|
2009-07-13 9:37AM |
|
Hole Saw blades&hand grinder parts. (2) 3/4\", 7/8\",1\", 1 3/16\", 1 3/8\", 2\" , (2) 2 1/8\". $10.00 503-706-9512 peter_built78@hotmail.com Location: Hamiltonits NOT ok to contact this poster with services or other commercial interests |
|
Truck Bed tool box - $100 (Billings) (pic)
|
Billings |
|
2009-07-13 8:23AM |
|
Truck bed tool box. Flush mount type. Hasnt been in my truck for 2 years, sits in garage. Looks just like the one in the picture, but name brand says \"husky\" from Home Depot. Call Brian at 619-733-3447 (cell phone). Looking for $100 cash. Location: Billingsits NOT ok to contact this poster with services or other commercial interests |
|
Lugall come along - $300 (kalispell) |
kalispell |
|
2009-07-13 7:14AM |
|
Big come along for loading vehicles on trailers,or getting you out when stuck.Makes all other come alongs look like tinker toys,Over 600.new,this one is in very good condition.Price 300.00 Firm.call 406-270-9092 Location: kalispellits NOT ok to contact this poster with services or other commercial interests |
|
Pickup box work trailer - $800 (Victor) (pic)
|
Victor |
|
2009-06-30 8:55PM |
|
Pickup box trailer1-ton frame and axle with liftgateCall (406) 880-0457 Location: Victorits NOT ok to contact this poster with services or other commercial interests |
|
CRAFTSMAN RADIAL ARM SAW - $200 (Bozema, MT) (pic)
|
Bozema, MT |
|
2009-06-30 7:58PM |
|
10\" radial arm, runs good, comes with carbide Systamatic blade. Evenings 406-586-3706, Daytime 406-581-3706 Location: Bozema, MTits NOT ok to contact this poster with services or other commercial interests |
|
DELTA SAWBUCK - $150 (Bozeman, MT) (pic)
|
Bozeman, MT |
|
2009-06-30 7:52PM |
|
Crosscuts up to 16 inches, excellent for siding, soffit, and framing work. Comes with 2 blades. Evenings 406-586-3706 Daytime 406-581-3706 Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests |
|
craftsman air compressor - $150 (frenchtown) |
frenchtown |
|
2009-06-30 7:47PM |
|
30 gallon upright compressor. 6 hp. 6.4 cfm at 90 psi. 110 volt Location: frenchtownits NOT ok to contact this poster with services or other commercial interests |
|
Woodmaster 37' DOUBLE DRUM SANDER - $3500 (BOZEMAN) (pic)
|
BOZEMAN |
|
2009-06-30 6:25PM |
|
This is a Woodmaster 37\" double drum sander. It has two rotating drums, one in front of the other. It can be loaded with 2 different grits of sandpaper. The usual configuratuon is coarser on the front and finer on the rear. The sanding motor is 7 1/2 hp. The feed motor that sends the stock through is 1/4 hp. The feed motor has a reversing switch in place but I have not hooked it up. The feed is infinitly variable, a highly desirable feature to handle any type of wood or condition. It will feed at speeds that are quite fast to barely moving. It will flatten glued up panels, flush up assembled doors, sand parts etc. It will handle a 30 house door. It has a mobile base, and a few changes of paper. This machine is built like a tank with heavy steel framework. Separate motors for the feed and sanding insure that the power goes to the sanding drum. It is simple to adjust or true up if ever needed. It needs 220v service. If you are now sanding with a hand belt sander and a random orbit, this machine will open new worlds for you. Excellent service and parts (paper, velcro, advise etc) is just a phone call away. This is a great machine for the deticated amature shop or the professional shop on a budget Location: BOZEMANits NOT ok to contact this poster with services or other commercial interests |
|
WEEDEATER - $40 (Missoula) |
Missoula |
|
2009-06-30 6:24PM |
|
Stihl FS 45 weedeater. Has been in storage the past 4 years. Was used for two summers. Can be contacted at 541-6639 or 861-1061. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Snapper Walk Behind Mower - $400 (Missoula) (pic)
|
Missoula |
|
2009-06-30 5:21PM |
|
Very nice snapper mower. Hi Vac model, 7 H.P. Self proppeled with variable speed it even has a cup holder. This mower is practically brand new and sells for $650 new. I have another mower and my yard is too small to justify a mower like this, so it has to go. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Dewalt 12" Compound Miter Saw Model #DW705 - $200 (Corvallis MT) |
Corvallis MT |
|
2009-06-30 4:34PM |
|
Great condition compound miter chop saw for sale !!!! Brandnew $380 will sell to the first $200 OBO Location: Corvallis MTits NOT ok to contact this poster with services or other commercial interests |
|
Excalibur Sliding Table for table saw Model # EXSLT60 - $500 (Corvallis MT) |
Corvallis MT |
|
2009-06-30 4:30PM |
|
This Is a slidding table unit that over lays a table saw in order to cut large panels or sheets of ply wood saftly and efectivly on a table saw by one person.This unit is brandnew never used!!!!! I bought it but my shop was to small and I did not have any room to ever set it up and I have recently sold out in my shop and Must sacrifice at a steal of a deal!!!!! Motivated seller!!!!!! Will sell For $500 OBO. It is brand new and I have the book for it!!! Heck of a deal!!!!! Hurry At this price it shouldnt be around long although I have been wrong before!!!! Ha Ha Thanks for looking I didnt post any pics cause it is still in its wrapping and you could not even tell what it was! Look online for more specs and pics of it if you just look up the model # Thanks Location: Corvallis MTits NOT ok to contact this poster with services or other commercial interests |
|
Jet Edge Horizontal Vertical Sander Model # EHVS-80 - $600 (Corvallis MT) |
Corvallis MT |
|
2009-06-30 4:21PM |
|
This edge sander was bought new about two years ago. It is in great shape and working order! I paid $1300 for it but I have had to sell my shop due to hard times. If you want to see a pic of it email me or just look up the model # on the internet..... Will sell to the first $600 obo and will consider any differant deals one might have . This is a great tool! At a Great price! Let me know! Thanks Location: Corvallis MTits NOT ok to contact this poster with services or other commercial interests |
|
Hitachi Nail Gun - $110 (Darby) (pic)
|
Darby |
|
2009-06-30 4:08PM |
|
Runs Great Location: Darbyits NOT ok to contact this poster with services or other commercial interests |
|
Poulan Chain Saw - 16 in. bar - $50 (great falls) |
great falls |
|
2009-06-30 3:36PM |
|
Since I no longer have a wood burner, Im offering for sale my Poulan Wood Shark chain saw with 16 inch bar and chain.This saw starts, runs and cuts great, and has had good care. Not a lot of \"miles\" on it either. This is an excellent light weight firewood saw or trimming saw, and has plenty of power and speed to get the job done.I used to be a professional logger so I do know saws. And while this is not a \"pro\" saw, its about the most saw for the money youll find for firewood and chores.first $50.00 takes it.call Gene at 406-868-0076 Location: great fallsits NOT ok to contact this poster with services or other commercial interests |
|
HYDRAULIC HOSE PRESS - $1200 (MISSOULA) (pic)
|
MISSOULA |
|
2009-06-30 1:21PM |
|
Weatherhead Colto-Crimp II model T-410. Weatherhead cabinet with many fittings & dies. Aeroquip saw. This is a great deal at $1200. If you have any questions about this it can be seen at the Axmen, 7655 Highway 10 West, 3 miles west of the Missoula airport. Location: MISSOULAits NOT ok to contact this poster with services or other commercial interests |
|
snapon box - $5000 (great falls) |
great falls |
|
2009-06-30 11:53AM |
|
krl1001 new never in a shop hardwood top Location: great fallsits NOT ok to contact this poster with services or other commercial interests |
|
antique table saw,w/shaper (great falls) |
great falls |
|
2009-06-30 11:43AM |
|
still in working cond. Location: great fallsits NOT ok to contact this poster with services or other commercial interests |
|
SNAPON LIFT (GREAT FALLS) |
GREAT FALLS |
|
2009-06-30 11:29AM |
|
MID RISE LIFT LIKE NEW Location: GREAT FALLSits NOT ok to contact this poster with services or other commercial interests |
|
Titan 440i Airless Sprayer - $450 (Lolo) (pic)
|
Lolo |
|
2009-06-30 11:13AM |
|
This is a Titan 440i Airless Paint Sprayer. This machine is only 1yr old, the previous only winterized it wrong, so it needs a repack. This is really inexpensive on these titans, and I would be willing to do it for anyone interested for the cost of the parts plus $20 labor. Which far less than the dealer would charge. It has a brand new Graco hose and contractor II gun, this retailed at $150 by its self. Im asking $450 OBO. Location: Loloits NOT ok to contact this poster with services or other commercial interests |
|
Honda Pressure Washer 7 HP - $250 (Lolo) (pic)
|
Lolo |
|
2009-06-30 11:06AM |
|
Here is a Honda 7Hp pressure washer. Its been well maintained, runs, and works well. Asking $250.00 Location: Loloits NOT ok to contact this poster with services or other commercial interests |
|
CONCRETE SAW (Missoula) (pic)
|
Missoula |
|
2009-06-30 10:35AM |
|
Target concrete saw. Model is a Deluxe 1855-3505 with blade. This unit runs good. Come on in to the Axmen and check it out. If you are interested call the Axmen at 728-7020 or stop by and see it. We are located 3 miles west of the airport at 7655 Highway 10 West. Our hours are Tuesday - Friday 8:30 to 5:30 and Saturday 9:00 - 2:00. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman Snow Blower - $150 (polson) (pic)
|
polson |
|
2009-06-30 9:37AM |
|
Excellent condition 8 speed, 23 inch cut, 5 hp Location: polsonits NOT ok to contact this poster with services or other commercial interests |
|
Like New Hitachi Table saw - $350 (polson) (pic)
|
polson |
|
2009-06-30 9:37AM |
|
10\" Hitachi table saw Like new Location: polsonits NOT ok to contact this poster with services or other commercial interests |
|
New 5 gallon metal gas / jerry cans - $30 (Bozeman) (pic)
|
Bozeman |
|
2009-06-30 9:17AM |
|
I have two brand new Wedco 5 gallon jerry cans. These are high quality, tight sealing gas cans, not the leaky CARB compliant ones the government wants you to use. If interested, please call or email. 586-1426 Thanks Location: Bozemanits NOT ok to contact this poster with services or other commercial interests |
|
Alcota Steam Cleaner - $650 (Great Falls, MT) |
Great Falls, MT |
|
2009-06-30 8:39AM |
|
Heavy duty steam/pressure cleaner. runs on #1 diesel fuel. portable! Location: Great Falls, MTits NOT ok to contact this poster with services or other commercial interests |
|
2250 watt generator - $80 (frenchtown) |
frenchtown |
|
2009-06-29 12:38AM |
|
powermate 2250. runs and works perfect Location: frenchtownits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman Radial Arm Saw - $100 (Belgrade) (pic)
|
Belgrade |
|
2009-06-27 10:02AM |
|
Radial Arm saw, used very little (still has original blade), Set up on casters. Needs a new wood table top because the back piece is missing. Give me a call 581-3458 Location: Belgradeits NOT ok to contact this poster with services or other commercial interests |
|
skid steer tracks - $1500 (Ronan) (pic)
|
Ronan |
|
2009-06-27 9:58AM |
|
fits 12\" wide tires any machine great shape great value 208-660-1216 Location: Ronanits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman 3HP 15 Gal #167241 Air Compressor - $100 (Bozeman) (pic)
|
Bozeman |
|
2009-06-26 1:22AM |
|
Craftsman 3HP, 15 gallon, permanently lubricated, model 167241 air compressor. Used very little, excellent condition. Serious inquiries please call Scott at 406-451-8096. $100 cash only, no holds. Location: Bozemanits NOT ok to contact this poster with services or other commercial interests |
|
Troy Bilt Pressure Washer - $150 (Kalispell) (pic)
|
Kalispell |
|
2009-06-24 12:48PM |
|
This is a 7hp Briggs and Stratton pressure washer. It produces 300 psi and 2.8 gpm. It has low hours. It does need a new pressure washing gun/wand. They are available at Lowes and I figured I would let you decide what kind you wanted, they cost $25.00- $50.00I would like $150.00 OBO willing to deal.MTwoodguy @ (at) yahoo dot com Location: Kalispellits NOT ok to contact this poster with services or other commercial interests |
|
SNAPON KRA2411 PES - $2500 (FLATHEAD VALLEY) (pic)
|
FLATHEAD VALLEY |
|
2009-06-24 12:26PM |
|
I have for sale a beautiful Snapon CLASSIC 78 ULTRA YELLOW tool box w/wood top. Great condition cosmetically and all the drawers operate smooth as a swiss watch. This box lists for $4,250 + $372 for the wood top on the Snapon website. here is the link.......http://buy1.snapon.com/catalog/item.asp?P65=&tool=storage&item_ID=74165&group_ID=19507&store=snapon-store&dir=catalogLocal buyers I will deliver for free. For an extra $50, I would deliver as far as Missoula. Location: FLATHEAD VALLEYits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman 1hp 3gal air compressor - $75 (missoula) (pic)
|
missoula |
|
2009-06-24 12:19PM |
|
This year-old oil-lubed compressor has less than 5 hrs use. Price includes a 50 hose, and some attachments. It works great but I inherited a 12-gal compressor recently from my wifes uncle. I can be reached at 728-8546. Location: missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Mini Wood Lathe - $100 (Blgs) (pic)
|
Blgs |
|
2009-06-24 5:10PM |
|
Jet mini wood lathe with Great Neck knife set. Excellent Condition! Location: Blgsits NOT ok to contact this poster with services or other commercial interests |
|
3 Welders Mig, TIG ,& Stick (Helena ) |
Helena |
|
2009-06-24 4:54PM |
|
Im up sizing looking to sell my welders , 1 Hobart 175 handler in good shape maybe 3 1/2 rolls of wire run , 1 Miller Thunderbolt AC /DC 220 volt Stick ,& Miller 152 Maxstar Tig welder . All in Very good shape not used a lot . $450.00- to $800 I have all trhe books Thanks Bruce Location: Helena its NOT ok to contact this poster with services or other commercial interests |
|
12'' delta contractor table saw - $350 (missoula) |
missoula |
|
2009-06-24 3:29PM |
|
Yes a 12 contrator saw that is in great condition. It has a 35 unifence with a new tape and a new #pointer.Also has a 2H.P. rebuilt motor. Saw is heavy duty and would be great for any condition light or heavy. Question call 406 207-6878 Location: missoulaits NOT ok to contact this poster with services or other commercial interests |
|
craftsman table saw (great falls) (pic)
|
great falls |
|
2009-06-24 2:59PM |
|
older craftsman table sawworks greatmake me a resonable offerthanks406.799.4973 Location: great fallsits NOT ok to contact this poster with services or other commercial interests |
|
Scissor Man lift. 32" wide - $3000 (Hamilton, MT) (pic)
|
Hamilton, MT |
|
2009-06-24 11:39AM |
|
This scissor lift is only 32\" wide and has a maximum platform height of 20 feet. The batteries were replaced within the last 6 months and it has a new deck. Thank you for your interest,Jay Powell406-880-5143 Location: Hamilton, MTits NOT ok to contact this poster with services or other commercial interests |
|
Hoffmann Brake Lathe - $1500 (Great Falls , MT.) |
Great Falls , MT. |
|
2009-06-24 10:14AM |
|
Model 201 Truecut with all adapters. Approx. 5yrs. old. RETIRED, MAKING ROOM. Will be more shop tools for sale later on. If intrested call 781-0028-----GF.MT. Location: Great Falls , MT.its NOT ok to contact this poster with services or other commercial interests |
|
Chainsaws (Victor) (pic)
|
Victor |
|
2009-06-24 9:46AM |
|
38-Stihl MS 440 chainsaws. For more information call Kevin at 406-251-2221 or visit www.gardnersauction.com Location: Victorits NOT ok to contact this poster with services or other commercial interests |
|
One Ton CM Automatic Hoist - $1500 (Anaconda) (pic)
|
Anaconda |
|
2009-06-24 8:06AM |
|
One ton CM automatic hoist with 20 of heavy duty chain, 35 extension cord 115 power supply Call JD at 560-0068 for specifics Location: Anacondaits NOT ok to contact this poster with services or other commercial interests |
|
RIDGED PIPE STAND W/ROLLERS - $25 (BOZEMAN) |
BOZEMAN |
|
2009-06-23 12:39PM |
|
THIS IS A HEAVY DUTY ADJUSTABLE PIPE STAND CALL 570 3480 I HAVE PICS BUT THEY UPLOAD TOO SLOW TO CRAIGS LIST Location: BOZEMANits NOT ok to contact this poster with services or other commercial interests |
|
Franklin Foundry 37" Wood Lathe. Offer - $100 (Bozeman) (pic)
|
Bozeman |
|
2009-06-23 12:08PM |
|
Franklin Foundry 37\" Wood Lathe. $100 or offer406-587-9255406-581-8043 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests |
|
Wire Stretcher. Offer - $20 (Bozeman) (pic)
|
Bozeman |
|
2009-06-23 12:07PM |
|
Wire Stretcher. $20 or offer406-587-9255406-581-8043 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests |
|
rotundra occilascope /dagnostic center - $25 (stevensville mt) |
stevensville mt |
|
2009-06-23 4:52PM |
|
rotundra scope/diagnostic center with sensors /adapters /books and manuals first 25 $ need space in the garage , works fine ...... call 396-7905 Location: stevensville mtits NOT ok to contact this poster with services or other commercial interests |
|
HONDA 1000 WATT GENERATOR! - $650 (lOLO) (pic)
|
lOLO |
|
2009-06-23 4:10PM |
|
Honda EU1000I Generator 1000 watt. Less than 20 hours on unit. Great for camping or running small tools and appliances. $650.00 O.B.O Cash only please. Tom @ 406-546-2213 Location: lOLOits NOT ok to contact this poster with services or other commercial interests |
|
Brand New Toro Z-Turn - $2450 (Libby) (pic)
|
Libby |
|
2009-06-23 4:01PM |
|
19hp Koehler Courage Engine42\" Side Discharge Deck597cc3 Year Limited WarrantySave $150!! Location: Libbyits NOT ok to contact this poster with services or other commercial interests |
|
Power Trowel - $995 (Missoula) (pic)
|
Missoula |
|
2009-06-23 11:54AM |
|
Stone Smooth Operator Power Trowler CF-364. 5.5hp B&S engine with 4-36\" blades. Trowel is in good condition and works great. Email or call 406-542-6606. No trades please, local cash deals only! Price: $995 Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Stihl MS441 Magnum Professional Chain Saw - $600 (Missoula) (pic)
|
Missoula |
|
2009-06-23 11:40AM |
|
Stihl MS441 Magnum Professional Chain Saw 70.7cc Engine Displacement 5.5 bhp Engine Power 25 Bar Price: $600obo Saw has been used. Good condition. Sharp chain! Email or call 406/542-6606 for more details. No trades please! Local, cash only deals! Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
DeeZee Truck Tool Box - $275 (Missoula) (pic)
|
Missoula |
|
2009-06-23 11:31AM |
|
DeeZee Truck Tool Box Competitor Series (Deep) Like New! Fits full size pickup box. Comes with keys for locks and sliding trays. Excellent condition. Price: $275obo Call 406/542-6606 or email for more details. No trades please! Local, cash only deals! Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
PORTABLE COMPRESSOR's (missoula) (pic)
|
missoula |
|
2009-06-23 10:13AM |
|
2= coleman powermate contractor compressors. 5.5 briggs&stratton. both will run with little work. $300.00....thanks call...406-239-1357 Location: missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Nibco & Kitz Butterfly Valves - $45 (406-860-4342 (Ed)) |
406-860-4342 (Ed) |
|
2009-06-23 7:34AM |
|
6ea., 3\" Kitz Butterfly valves. New condition, price new $98.00 asking $45.00 OBO.6ea., 2.5\" Nibco Butterfly valves. New condition, price new $98.00 asking $45.00 OBO. Location: 406-860-4342 (Ed)its NOT ok to contact this poster with services or other commercial interests |
|
Fein 18 Volt portable drill/charger - $150 (406-860-4342 (Ed)) |
406-860-4342 (Ed) |
|
2009-06-23 7:26AM |
|
Fein 18 volt portable drill, 2ea batteries, charger, manual and hard side carry case.Used very little (one battery doesnt recharge very good).New price $299.00 asking $150.00 OBO Location: 406-860-4342 (Ed)its NOT ok to contact this poster with services or other commercial interests |
|
Hoffmann Brake Lathe - $1500 (Great Falls,MT.) |
Great Falls,MT. |
|
2009-06-23 7:20AM |
|
Model 201 Truecut with all adapters. Approx. 5yrs. old. RETIRED,MAKING ROOM. Will be more shop tools for sale later down the line. e-mail or call 406-781-0028 on this item. Location: Great Falls,MT.its NOT ok to contact this poster with services or other commercial interests |
|
Nibco & Kitz Butterfly Valves - $45 (406-860-4342 (Ed)) |
406-860-4342 (Ed) |
|
2009-06-23 7:20AM |
|
New condition, 6ea 2.5\" Nibco Butterfly valves. Price new $98.00 asking $45.00 OBO.New condition, 6ea 3\" Kitz Butterfly valves.price new $98.00 asking $45.00 OBO. Location: 406-860-4342 (Ed)its NOT ok to contact this poster with services or other commercial interests |
|
Bosch Power Box/Charger - $150 (406-860-4342 (Ed)) |
406-860-4342 (Ed) |
|
2009-06-23 7:12AM |
|
Bosch Power Box, 7.2 - 24 volt battery charger CD player combo, heavy duty framed unit, suitable for construction sites.Price new $185.00 asking $150.00 OBO.LIKE NEW CONDITION! Location: 406-860-4342 (Ed)its NOT ok to contact this poster with services or other commercial interests |
|
LMI Pump Mod #B121-297 - $600 (406-860-4342 (Ed)) |
406-860-4342 (Ed) |
|
2009-06-23 7:03AM |
|
LMI Milton Roy Pump Model B121-297, varible speed and stroke.Hardly used, has S Steel liquid end, not used for corrisive chemicals. Sells new for $1,200.00 - $1,300.00, asking $600.00 OBO. Location: 406-860-4342 (Ed)its NOT ok to contact this poster with services or other commercial interests |
|
Generator 7500 watt Diesel - $1800 (Billings AREA) |
Billings AREA |
|
2009-06-23 6:38AM |
|
Brand new 7500 watt Diesel generator for sale or trade. Electric start. Will trade for Table saw or any other wood working tools or guns Location: Billings AREAits NOT ok to contact this poster with services or other commercial interests |
|
Commercial Paint Booth - $2000 (Whitehall) (pic)
|
Whitehall |
|
2009-06-23 5:27AM |
|
Used JBI double filtration commercial spray booth. Air moves through booth at 125 FPM for efficient particulate removal. The booth is made of 18 gauge galvanized sheet steel. Comes with filters and hazardous light location light fixture that is a 48” 4-tube light; This unit also comes with an exhaust stack kit to mount in through the roof or wall and an 18” fan with motor. This unit retailed for over $4,000. A rare find and good value at $2,000. Please call 406-533-0406 Location: Whitehallits NOT ok to contact this poster with services or other commercial interests |
|
MILLER DIAL ARC 250 AC/DC WELDER & CART - $850 (HELENA) (pic)
|
HELENA |
|
2009-06-20 12:39PM |
|
MILLER DIAL ARC STICK WELDER AND CART AND 2/0 CABLE AND GROUND CLAMP 220 AMP Location: HELENAits NOT ok to contact this poster with services or other commercial interests |
|
RBI 20" SCROLL SAW AND STAND - $325 (HELENA) (pic)
|
HELENA |
|
2009-06-20 12:33PM |
|
20 INCH RBI PROFESSIONAL SCROLL SAW AND STAND AND NUMERIOUS BLADES GREAT CONDITION Location: HELENAits NOT ok to contact this poster with services or other commercial interests |
|
GRIZZLY 6 x 48" 12" DISK SANDER /GRINDER - $275 (HELENA) (pic)
|
HELENA |
|
2009-06-20 12:25PM |
|
GRIZZLY 6\" X 48\" BELT SANDER WITH A 12INCH DIAMENTER FACEING SANDER VERY GOOD CONDITION. BELTS INCLUDED. Location: HELENAits NOT ok to contact this poster with services or other commercial interests |
|
DeWalt Heavy Duty 10" Compound Miter Saw - $250 (Great Falls, MT) (pic)
|
Great Falls, MT |
|
2009-06-20 2:54PM |
|
DeWalt Heavy Duty 10\" Compound Miter Saw with Electric Brake. Box never been opened...never been used. $250 obo. Location: Great Falls, MTits NOT ok to contact this poster with services or other commercial interests |
|
Kargo Master Lumber Rack - $700 (Bozeman) (pic)
|
Bozeman |
|
2009-06-20 2:48PM |
|
Great Kargo Master Lumber Rack that came off my 2006 long bed crew cab chevy, 2\" tubing, rear window guard, its in great shape. local dealer says new price would be $1,000.00 to $1,100.00. Location: Bozemanits NOT ok to contact this poster with services or other commercial interests |
|
Makita 7 1/4" Worm Drive Circular Saw - $50 (Bozeman) (pic)
|
Bozeman |
|
2009-06-20 1:46PM |
|
Used Makita 7 1/4\" Worm Drive Circular SawWorks greatSee Photo Location: Bozemanits NOT ok to contact this poster with services or other commercial interests |
|
Ryobi 18 volt Stapler - $15 (Bozeman) (pic)
|
Bozeman |
|
2009-06-20 1:45PM |
|
Ryobi 18 volt Stapler, battery not includedWorks great $15.00 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests |
|
Pro Shot L4 Laser Level - $700 |
|
|
2009-06-20 1:12PM |
|
Pro Shot L4 semi self leveling laser with tri pod, R5 target and story pole. It is in great shape. NEW would cost over $1,200 You pay shippingits NOT ok to contact this poster with services or other commercial interests |
|
eng stand - $50 (helena) |
helena |
|
2009-06-20 12:48AM |
|
divorce sale the stand is valued at about 500.00 bucks you can but just about any thing on it i have had 8.62 detroits on it and 350 454 Location: helenaits NOT ok to contact this poster with services or other commercial interests |
|
Electric 1/2" Impact wrench - $75 (Laurel) (pic)
|
Laurel |
|
2009-06-20 9:42AM |
|
Cummins made..used for maybe a week to move trailer houses..comes with plastic case..sold new for $199..firm price Location: Laurelits NOT ok to contact this poster with services or other commercial interests |
|
18" Paint Roller and Pan - $50 (Missoula) |
Missoula |
|
2009-06-20 9:38AM |
|
Excellent condition, like new, roller, roller head and pan. Call 406.396.2746 or 406.721.7446. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Jet Wood Lathe - $475 (Laurel, MT) (pic)
|
Laurel, MT |
|
2009-06-20 7:16AM |
|
Jet wood lathe model 1236 with 3/4 HP variable speed motor. Great condition. I will let it go for $475 (we are moving) - Sells new for $769.Features: JET 12\" x 34-1/2\" 3/4 HP Woodworking Lathe* Heavy-duty cast-iron lathe bed adds stability while limiting vibration* Headstock pivots 90° and locks to facilitate outboard turning* Reeves drive pulley system allows quick variable speed changes from 550 to 3,000 RPM* The bed is specially designed to allow easy positioning of the outboard turning tool rest* Heavy-duty cast-iron headstock and tailstock provide rigidity and strength for long tool life* Hollow tailstock lets you perform long hole boring operations* Variable-speed spindle includes six pre-positioned selections with positive detents to quickly set speed to the most common requirements* Locking control levers quickly and securely position the tool rest* Heavy-duty 3/4 HP single phase induction motor with industrial controls provides smooth, consistent power during use* Heavy-duty steel open stand provides support and stability to the tool for better resultsThe JET 708352 Includes:* 12\" x 34-1/2\" 3/4 HP Woodworking Lathe - 708352* 12\" Tool Rest* 6\" Face Plate* Spur Center* Live Center Location: Laurel, MTits NOT ok to contact this poster with services or other commercial interests |
|
Honda EU2000i Generator - $800 (Billings) |
Billings |
|
2009-06-20 6:17AM |
|
2000 watt---used twice---super quiet Location: Billingsits NOT ok to contact this poster with services or other commercial interests |
|
Forklift - Electric - Charger - $6300 (Dillon) |
Dillon |
|
2009-06-19 10:57AM |
|
1995 Crown Narrow Isle - RR3020 /With Charge. This lift is in great shape. Low hours and well maintained. We have moved your shipping facility to a larger warehouse and no longer need this lift.This lift is currently in operation and could be test driven or see at our Dillon, Mt. office. Please contact us at (406)683-5900 with any question or if you would like any additional information. Sent email address for photo for viewing. Location: Dillonits NOT ok to contact this poster with services or other commercial interests |
|
Big tool sale and shop items (Fairfield, MT) |
Fairfield, MT |
|
2009-06-19 10:56AM |
|
Rocky Moutain Auto in Fairfield and Curtiss Service Center in Simms are combining shops so we will be having a sale of extra items at Rocky Mountain Auto #12 1st St Sw in Fairfield, MT. Saturday June27th from 8 a.m. to 6 p.m. and Sunday 9 a.m. to 3 p.m. Tire cage, office supplies, shop supplies, small tools, jack stands, foreign and domestic mitchell repair mauels, garbage cans, bead blaster, drill press, used tires, tire racks, hose reels, shop vac, band saw, 22/35 ton 2 stage air-hyd jack and much more. Some household items also. Any questions call 406-467-3600 Location: Fairfield, MTits NOT ok to contact this poster with services or other commercial interests |
|
Welder - Lincoln "Vantage 300" - $8000 (Helena) (pic)
|
Helena |
|
2009-06-19 10:38AM |
|
Lincoln \"Vantage 300\" welder with low hours, Diesel Kubota elec start, S.S. cover. Have sufficient welding equipment to set-up a mobile welding unit: including Flatbed with lockable storage, designed for crew-cab truck, Air Compressor - Champion with gas engine and elec. start, Lincoln LN 25 wire feed and many more items. All items have been in storage since my sons death in late 2007. I can email photos of equipment and price list. Prefer to sell as package Location: Helenaits NOT ok to contact this poster with services or other commercial interests |
|
Power Trowel - $995 (Missoula) (pic)
|
Missoula |
|
2009-06-19 10:29AM |
|
Stone Smooth Operator Power Trowler CF-364. 5.5hp B&S engine with 4-36\" blades. Trowel is in good condition and works great.Email or call 406-542-6606. No trades please, local cash deals only!Price: $995 Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Stihl Chain Saw - $450 (Stevensville) |
Stevensville |
|
2009-06-19 10:21AM |
|
Sihl MS362 Chain Saw. Only one tank used. Location: Stevensvilleits NOT ok to contact this poster with services or other commercial interests |
|
FRAMING HAMMER - $175 (KALISPELL) (pic)
|
KALISPELL |
|
2009-06-19 10:00AM |
|
Stiletto TB11 15 framing hammer with changeable head. All offers considered. Location: KALISPELLits NOT ok to contact this poster with services or other commercial interests |
|
Auction (Ennis Montana) |
Ennis Montana |
|
2009-06-19 9:35AM |
|
Tools at auction www.mtpremier.com Location: Ennis Montanaits NOT ok to contact this poster with services or other commercial interests |
|
TABLESAW-$50;RADIAL ARM SAW-$50;INCUBATOR-$400; (SHAWMUT) |
SHAWMUT |
|
2009-06-19 7:01AM |
|
8 inch Atlas tablesaw-3/4 HP Craftsman motor. 7 inch radial arm saw-very tight-steel stand. GQF incubator ready to use. NO SCAMMERS Location: SHAWMUTits NOT ok to contact this poster with services or other commercial interests |
|
Hofmann Brake Lathe - $2000 (Great Falls,MT.) |
Great Falls,MT. |
|
2009-06-19 6:19AM |
|
Retired selling brake machine approx.5 yrs. old. has all adapters.MODEL 201 Truecut. e-mail or call 406-781-0028 Location: Great Falls,MT.its NOT ok to contact this poster with services or other commercial interests |
|
Motorcycle/ATV Jack Team Mechanix 1500 LBS - $35 (Helena Montana) (pic)
|
Helena Montana |
|
2009-06-16 12:42PM |
|
Selling my Team Mechanix 1500 LBS Motorcycle/ATV Jack asking $35.00 Cash If interested drop me an email. Thanks. Location: Helena Montanaits NOT ok to contact this poster with services or other commercial interests |
|
Stihl MS390 chainsaw w/25" bar - $375 (Missoula) (pic)
|
Missoula |
|
2009-06-16 8:13PM |
|
Stihl MS390 chainsaw with 25\" bar. Less than 1 yr old - under warranty. Only 6 -7 tanks of gas used through this machine. Excellant / new condition. Professionally customed tuned for highest efficiency / power. Paid $489.00 asking $375.00 firm. Location: Missoulaits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman molding cutters and blade - $50 (Great Falls/Helena) (pic)
|
Great Falls/Helena |
|
2009-06-16 7:46PM |
|
Complete set of molding cutter heads and mounting blade that they attached too. Just viewed a 15 piece set on sears.com with only 15 pieces and they were $130.00 without the mounting blade the cutter heads attached to. This is a 25 piece set. Only used one set of heads to make some beaded molding. All the other are new in excellent condition, including the beaded molding heads.See link from searshttp://www.sears.com/shc/s/p_10153_12605_00924023000P?keyword=shaping+tools Location: Great Falls/Helenaits NOT ok to contact this poster with services or other commercial interests |
|
next
100 Listings >
|
|
|
|
Search
Create Post
Goto Image view