I have a brand new 18v DeWalt (DC390) circular saw and a new 16.6\" framing blade. Never been used. Plus a 18v XRP Dewalt battery which has also never been used. I will also throw in a 18v DeWalt (DW919) work light, again, never been used. I do not have a charger for these tools or a case. Thanks for looking!!! Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests

Crosscuts up to 16 inches, excellent for siding, soffit, and framing work. Comes with 2 blades. Evenings 406-586-3706 Daytime 406-581-3706 Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests

This is a Woodmaster 37\" double drum sander. It has two rotating drums, one in front of the other. It can be loaded with 2 different grits of sandpaper. The usual configuratuon is coarser on the front and finer on the rear. The sanding motor is 7 1/2 hp. The feed motor that sends the stock through is 1/4 hp. The feed motor has a reversing switch in place but I have not hooked it up. The feed is infinitly variable, a highly desirable feature to handle any type of wood or condition. It will feed at speeds that are quite fast to barely moving. It will flatten glued up panels, flush up assembled doors, sand parts etc. It will handle a 30 house door. It has a mobile base, and a few changes of paper. This machine is built like a tank with heavy steel framework. Separate motors for the feed and sanding insure that the power goes to the sanding drum. It is simple to adjust or true up if ever needed. It needs 220v service. If you are now sanding with a hand belt sander and a random orbit, this machine will open new worlds for you. Excellent service and parts (paper, velcro, advise etc) is just a phone call away. This is a great machine for the deticated amature shop or the professional shop on a budget Location: BOZEMANits NOT ok to contact this poster with services or other commercial interests

I have two brand new Wedco 5 gallon jerry cans. These are high quality, tight sealing gas cans, not the leaky CARB compliant ones the government wants you to use. If interested, please call or email. 586-1426 Thanks Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Craftsman 3HP, 15 gallon, permanently lubricated, model 167241 air compressor. Used very little, excellent condition. Serious inquiries please call Scott at 406-451-8096. $100 cash only, no holds. Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Franklin Foundry 37\" Wood Lathe. $100 or offer406-587-9255406-581-8043 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Wire Stretcher. $20 or offer406-587-9255406-581-8043 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Great Kargo Master Lumber Rack that came off my 2006 long bed crew cab chevy, 2\" tubing, rear window guard, its in great shape. local dealer says new price would be $1,000.00 to $1,100.00. Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Used Makita 7 1/4\" Worm Drive Circular SawWorks greatSee Photo Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Ryobi 18 volt Stapler, battery not includedWorks great $15.00 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

nice tool box for sale full of tools I need $1200.00 for it the air compresser is nice but needs some work I will send pics if you want to see it just let me know 1200.00 for both tool box and air compresser because I need a truck and I will trade for a ford f250 ext cab long bed truck must run and be a good truck with clean title. call for more info 406-451-9813 or email me at edwardrudd@rocketmail.com Location: bozeman,mtits NOT ok to contact this poster with services or other commercial interests

Older model Montgomery Ward stainless steel table saw. $70 O.B.O.Tel: 406-586-0919 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

miller bobcat 250 with only 16.2 hours on machine. comes with 50 stinger, 50 magnetic ground, two 50 extensions. this one also has the upgraded fuel injection for easy starts at the higher altitude. will throw in an auto darkening helmet, welding jacket, and some welding rod if this unit is sold by june 15th. call 406-580-8127 Location: bozemanits NOT ok to contact this poster with services or other commercial interests

110v Table saw............$125110v Scroll saw............$50220v 10Gal Air Compressor..............$100Painted Steel compact truck Tool Box............$50 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Wire Stretcher. $20 or offer406-587-9255406-581-8043 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

I have a John Deere 51SV chain saw I received from my father-in-law. Its the same saw as an Echo 510. It starts and runs, but has low compression and bogs down pretty easy. I think some new rings are in order. Rings are still available. The starter cover is cracked, as is the rear handle. Good chain and 20\" bar. Fix or use for parts. Please call 586-1426. Thanks Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Bell equipment trailer. 12-ton capacity Deck length: 18Overall length: 28Pentel hitch$2900.00406-580-6606 (or 406-570-7744 ) Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Brand New, never been used. $354.00 Retail.DeWalt D51256K 16 Gauge Finish NailerLightweight magnesium housing delivers a 3.9 lb. unit-among the lightest in the industry Tool-free depth adjustment assists in locating perfect depth setting Dual-load magazine with 160 nail capacity can be loaded by either load & lock or lock & load for maximum convenience Swept-back contact trip with low profile no-mar pad allows for better visibility and durability Tool-free jam clearing feature eliminates down-time from bent nails caught in the nosepiece Tool-free 360� exhaust channels air and dust away from user Tool-free reversible belt hook allows user to place tool on belt when not in use Trigger lock-off allows trigger to be disabled when not in use Specifications:Nail Diameter: 16 gauge Nail Length Capacity: 1-1/4\" - 2-1/2 \" Magazine Angle:Straight Magazine Capacity: 160 nails Magazine Loading: Rear load, dual load Operating Pressure: 70 - 120 psi Depth Setting: Tool-free No Mar Pad: Low profile rubber Integrated Belt Hook: Tool-free reversible Jam Clearing: Tool-free Exhaust: 360� Padded Grips: Textured anti-slip Trigger Lock Off: Yes Firing Mode: Sequential trigger Tool Height: 9.5 \" Tool Length: 12.5 \" Tool Width: 3.0 \" Tool Weight: 3.9 lbs Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Fairly new. Works great! Give me a call at 208-630-3667 Location: bozemanits NOT ok to contact this poster with services or other commercial interests

For sale is a used but in excellent condition snap on roll bottom toolbox. It has been used but as the pictures show it is in mint condition. I sold some of my tools and now have this extra box that I do not need. Everything works great, and it comes with 2 factory keys. Locks work great! We all know what these sell for. I was asking $650 for it, now I am down to $600.I am located in Bozeman. Please call me if you are intrested in the toolbox at 406-451-1928. The first one with cash gets it. Thanks for looking!!! Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests

got it a year ago 18v dewalte-mail me or call@ 522-7120 Location: bozemanits NOT ok to contact this poster with services or other commercial interests

Ritter Box ClampModel: R525Serial: 563230/3PHManufactured on 2/21/200850\" x 100\" CapacityAll electronic operation6,000 PSI Maximum pressureAdjustable pressure settingsSemi-automatic opening adjustmentWeight: 2,810 lbs.Has never been used.........Ever.Asking $8,700 or reasonable offer.Please call 406.580.6726 with questions. Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests

OMGA Upcut Saw with Razorgage Fence nearly brand new, has minimal use.OMGA Upcut SawModel: T421 STSerial: 5661Manufactured in April 2008230/3PHRazorgage Fence10 left of cutSerial 20080023Manufactured early 2008Has Autolift option so information can be downloaded to the saw.Both are in like new condition and have barely been used. The saw has been dismantled and is in the storage area of our facility and was in working order prior to being dismantled. Asking $10,000 or reasonable offerPlease call 406.580.6726 with questions. Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests

I have a John Deere 51SV chain saw I received from my father-in-law. Its the same saw as an Echo 510. It starts and runs, but has low compression and bogs down pretty easy. I think some new rings are in order. Rings are still available. The starter cover is cracked, as is the rear handle. Good chain and 20\" bar. Fix or use for parts. Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

For sale is a used but in excellent condition snap on roll bottom toolbox. It has been used but as the pictures show it is in mint condition. I sold some of my tools and now have this extra box that I do not need. Everything works great, and it comes with 2 factory keys. Locks work great! We all know what these sell for. I am asking $650 for it. I am located in Bozeman. Please call me if you are intrested in the toolbox at 406-451-1928. The first one with cash gets it.Thanks for looking!!! Location: Bozeman, MTits NOT ok to contact this poster with services or other commercial interests

$110 saw from Sears. Not sure if ever even used it--nor am I likely to. The picture it is just something I found on Sears web site to help represent it---the one Im selling is a few years older, so its different. Mine has more metal and is a heavier duty model.I wont be checking email, so please call give me a call at 579.7679.Thanks. Location: Bozemanits NOT ok to contact this poster with services or other commercial interests

Bought new and used for one season. Attachments for traditional whips, or heavy-duty single whips (comes with a package of heavy duty).I wont be checking email, so please give me a call.Ph. 579.7679 Location: Bozemanits NOT ok to contact this poster with services or other commercial interests