<< All memphis, TN Classifieds
memphis, TN, tools

Goto List view
Telephone Testing Kit - $50 (downtown)
Telephone Testing Kit - $50 (downtown) downtown
Nice, rarely used telephone testing kit with toner and transmitter. Made by Progressive Electronics.$50  Please call 399-0457 or email. Location: downtownits NOT ok to contact this poster with services or other commercial interests
TIF XL-1A Refrigerant leak detector - $100 (Bartlett)
TIF XL-1A Refrigerant leak detector - $100 (Bartlett) Bartlett
This detector has only been used 3 times. No longer needed. It can detect all halogenated refrigerants.$100  901-644-5439 Location: Bartlettits NOT ok to contact this poster with services or other commercial interests
2 tubing benders - $70 (E Memphis)
2 tubing benders - $70 (E Memphis) E Memphis
2 hand tubing benders one says 5/8 od 21/4 r , the other says 3-4 od 3r. VERY GOOD DEAL,,,, Location: E Memphisits NOT ok to contact this poster with services or other commercial interests
Black & Decker Crosshair Laser Level - $20 (downtown)
Black & Decker Crosshair Laser Level - $20 (downtown) downtown
Slightly used laser level, has case, all attachments and instructions. 9 volt battery still works to!Please call 399-0457 or email. Location: downtownits NOT ok to contact this poster with services or other commercial interests
AMT Scroll Saw - $20 (U of M)
AMT Scroll Saw - $20 (U of M) U of M
 It works good just needs a blade. Has a strong motor on it. 901 313-8520Hey its only 20 bucks !!!! Location: U of Mits NOT ok to contact this poster with services or other commercial interests
Work Bench w/(2) Craftsman Chairs--Need To Sell--LOOOOK - $60 (Bartlett,tn)
Work Bench w/(2) Craftsman Chairs--Need To Sell--LOOOOK - $60 (Bartlett,tn) Bartlett,tn
Up for sale is a Work Bench w/(2) like new craftsman fold-up chairs.  The work bench is 5ft. long and 5ft. tall with peg board and hooks.  The work bench has one big pull out drawer.  The bench also has area for containers on the bottom.  The chairs are craftsman fold out chairs like new--black & red matching chairs---great for shop or around the house.  I\
Equipment Rental West Tn. Jackson, Selmer, Savannah, Corinth Ms. MORE! (West Tn. )
Equipment Rental West Tn. Jackson, Selmer, Savannah, Corinth Ms. MORE! (West Tn. ) West Tn.
Dozer - Backhoe - Excavator - Forklifts - Trenchers - Scissorlifts - Boomlifts - Augers - Bobcats - Generators - Light towers - Jack Hammers - Air Compressors - Concrete saws - Hammer drills - MUCH MORE & we also Uhaul Trucks & Trailers -  Conveniently located in Selmer Tn at 7357 Hwy 64E 38375 ph# 731-632-2620 Call us for all your rental needs, fast delivery!  Location: West Tn. its NOT ok to contact this poster with services or other commercial interests
Fluke 789 Multi Digital Meter - $200 (Olive Branch)
Fluke 789 Multi Digital Meter - $200 (Olive Branch) Olive Branch
Almost new Multimeter with leadsTranscat bag includedcall 901-335-4000SERIOUS INQUIERIES Location: Olive Branchits NOT ok to contact this poster with services or other commercial interests
NEw Milwaukee 6480-20 Complete Panel Saw System with 50-Inch Crosscut - $575 (memphis)
NEw Milwaukee 6480-20 Complete Panel Saw System with 50-Inch Crosscut - $575 (memphis) memphis
Technical Details8-inch panel saw system with a powerful 15 amp (3-1/4 max hp) Milwaukee motor (AC/DC)Cutting accuracy to within 1/32-inch in either cross-cutting or ripping directionsRigid all steel frame, square tubing is electrically welded to prevent warping or twisting; 20 amp commercial-grade paddle switchIncludes circular saw blade and blade wrenchWeighs 175 pounds shipped; 5-year warrantyMilwaukees 8-inch panel saw is an ideal tool for lumber yards, because it offers a quick and easy solution to cutting up to 4 by 8-foot sections of sheet goods to size. This unique saw has a cutting accuracy to within +/- 1/32 inch and a material thickness capacity of up to 1-3/4 inch. The saw also features an innovative horizontal handle for convenient on/off saw operation as well as a 20 amp commercial-grade paddle switch for long life.The 6480-20s frame is made from tough, electrically welded steel to ensure it wont warp or twist. The powerful 15 amp motor is mounted on a carriage that moves horizontally with minimal effort on graphite-impregnated nylon roller bearings which require no lubrication. The saw can also be turned 90 degrees and fixed to make vertical cuts. Horizontal and vertical scales provide quick and accurate cuts. The workpiece can be loaded from either the left or right side and it gently rolls through the saw on a smooth acting roller mechanism. The panel saw is not recommended for ripping panels larger than 4 by 8 feet. The extension kit accessory, 49-22-8108, is recommended for cutting sheet goods over 6 feet long. Location: memphisits NOT ok to contact this poster with services or other commercial interests
Compound Mitre Saw w/Portable Stand - $300 (Southaven)
Compound Mitre Saw w/Portable Stand - $300 (Southaven) Southaven
Craftsman 10\
Fluke Multimeter 87III - $125 (Olive Branch)
Fluke Multimeter 87III - $125 (Olive Branch) Olive Branch
New but not in box Klein carry pouch includedLeads includedcall 901-335-4000 Location: Olive Branchits NOT ok to contact this poster with services or other commercial interests
3 heavy floor rollers - $100 (memphis tn)
3 heavy floor rollers - $100 (memphis tn) memphis tn
Hello. I have 3 rollers pictured. over 100 lbs ea I think. 50each or all 3 for 100. 901 859 5112 Location: memphis tnits NOT ok to contact this poster with services or other commercial interests
Argon Cylinder - $30 (memphis)
Argon Cylinder - $30 (memphis) memphis
For sale is an argon welding cylinder (the larger of the 2 in the picother tank not for sale) it is empty it is a large tank about 5 feet tall Location: memphisits NOT ok to contact this poster with services or other commercial interests
20 ft Werner Ext Ladder NEW - $90 (Graham /Summer)
20 ft Werner Ext Ladder NEW - $90 (Graham /Summer) Graham /Summer
20 FT Werner Ext Ladder New Call Stan  901-399-4032  Location: Graham /Summerits NOT ok to contact this poster with services or other commercial interests
Storage ...Stud wall... Organizer New in Box! - $4 (germantown)
Storage ...Stud wall... Organizer New in Box! - $4 (germantown) germantown
Space Logic stud wall organizer with sealed pockets. 16\
Wilden 2" Aluminum Diapham Pump - $300 (McRae, AR)
Wilden 2 McRae, AR
Pump works Good, pump water, mud, sludge.Emptyed a 15 foot pool in 1 1/2 hours, with low air supply and restricted out flow pipe.Cash Contact gmtool@hotmail.com Location: McRae, ARits NOT ok to contact this poster with services or other commercial interests
Tool and Equipment Rentals (Memphis/Bartlett)
Tool and Equipment Rentals (Memphis/Bartlett) Memphis/Bartlett
We have all the equipment you need to get your job done in time!From generators and post hole diggers to full sized backhoes and skytraks reach forklifts, let us know how we can help you.The General Rental StoreDavid 901-379-1337 Location: Memphis/Bartlettits NOT ok to contact this poster with services or other commercial interests
Jet ProShop 10" Tablesaw - $775 (Eads, TN)
Jet ProShop 10 Eads, TN
Selling like new Jet ProShop 1 3/4 HP 10\
Table Saw, Hitachi Model C10FL - $225
Table Saw, Hitachi Model C10FL - $225 memphis, TN
Hitachi 10\
Auction June 27th Antique tools (Nesbit Ms)
Auction June 27th Antique tools (Nesbit Ms) Nesbit Ms
IT WILL BE TOOL ,TRACTORS AND ALOT MORE ---IF YOU HAVE ANY OLD ITEM AS FARM EQU. YOU CAN BRING THEN TO SEE , JUST CALL 1-662-449-3477GOING TO BE AT 60 PLEASANT HILL ROAD NESBIT MS 38651                                 ====================================      Location: Nesbit Msits NOT ok to contact this poster with services or other commercial interests
cement mixer - $95 (nesbit)
cement mixer - $95 (nesbit) nesbit
ryobi mix max, bought it off of craiglist to do a small 13 bag job. it did the trick.  works great. will mix two 69 lb. bags at a whack. just as pictured. cranks on first or second pull.  runs like a tiller. call mark at 901-606-6444. also have a grass catcher you pull behind mowet its a sears 4 footer. 40 bucks Location: nesbitits NOT ok to contact this poster with services or other commercial interests
1998 New Holland tractor Backhoe - $5600 (Memphis)
1998 New Holland tractor Backhoe - $5600 (Memphis) Memphis
MODEL 775. Serial # 2000F01031800027. 4 CYL engine turbo diesel 105 HP, 4 speed transmission, power shift. Tires 15.5x25. Loader bucket 96\
Milwaukee Right Angle Drill - $125
Milwaukee Right Angle Drill - $125 memphis, TN
Milwaukee Right Angle Drill used on my house.  Excellent condition.  125.00its NOT ok to contact this poster with services or other commercial interests
Delta universal tenoning jig in unopened box - $85 (Cordova)
Delta universal tenoning jig in unopened box - $85 (Cordova) Cordova
Here is a Delta universal tenoning jig still in its factory-sealed box.  Model #34-184.  Currently retails for $133 on amazon.com and not much less than that on eBay once you factor in shipping.  I already have a tenon jig and dont need this. Location: Cordovaits NOT ok to contact this poster with services or other commercial interests
^^^ Blue Boy Tubing Bender^^^ - $3000 (Jackson)
^^^ Blue Boy Tubing Bender^^^ - $3000 (Jackson) Jackson
HotRod RelicsOur passion is Hot Rods andBuilding Performance Engines!Over 40 yearsexperiencebuilding/restoring/customizing cars.American Machine & Hydraulic - Blue BoyTubing BenderCompare with usedonline here for $8500.00!Capacity (Mild Steel)Bending:3/4\
Craftsman Radial Arm Saw - $150 (Arlington, TN)
Craftsman Radial Arm Saw - $150 (Arlington, TN) Arlington, TN
Great Radial Arm Saw from Sears, 12 inch width, extra dido blades included$150, all offers considered901-828-5286 Location: Arlington, TNits NOT ok to contact this poster with services or other commercial interests
Craftsman 12 inch Band Saw - $100 (Arlington, TN)
Craftsman 12 inch Band Saw - $100 (Arlington, TN) Arlington, TN
Sears Craftsman Band/belt drive/sander saw. 12 inch, all offers considered. 901-828-5286 Location: Arlington, TNits NOT ok to contact this poster with services or other commercial interests
Thermal dynamics cutmaster 38 plasma torch - $1000 (little rock)
Thermal dynamics cutmaster 38 plasma torch - $1000 (little rock) little rock
Used for 8 months like new!Dynamics® CUTMASTER™ 38 air plasma cutting system, with a new generation 1Torch™ (One Torch), delivers a unique combination of speed and power to the industrys arsenal of machines for cutting light metal.The CUTMASTER 38 provides a best-in-class 30 amps of output current for faster cutting capability and greater bevel and pierce capability. Included with the CUTMASTER 38 is a high performance, ergonomic 1Torch designed for operator comfort and ease of use to reduce operator fatigue. The new generation torch design protects the head from damage for longer life. Light, flexible leads promote nimble maneuverability, while a tough outer cover resists heat and chemical damage.The CUTMASTER 38’s power provides longer arc length for excellent visibility, resulting in better operator control and easier straight-line cutting. A stronger, improved pilot arc cuts through paint and rust, plus initiates better piercing and beveling performance.A highly responsive auto restart feature for cutting expanded metal maintains arc while cutting over holes for quicker, smoother cutting and improved productivity and control. Auto voltage selection (115-230 input volts) eliminates switching mistakes and allows the unit to go from job to job without concern for available power.501-541-1438 ronnie Location: little rockits NOT ok to contact this poster with services or other commercial interests
Multi-Quip Diesel Welder/Generator - $2500 (Selmer, Tn)
Multi-Quip Diesel Welder/Generator - $2500 (Selmer, Tn) Selmer, Tn
Multi-Quip welder/generator300 amp10,000 watt generator3 cyl. mitsubishi diesel100% at 280 amp duty cycleless than 2400 hrson trailerVERY QUIET!!!Runs and welds GREAT!!!For Sale or Trade  731-610-0967 Location: Selmer, Tnits NOT ok to contact this poster with services or other commercial interests
Plane - Special, old - $20 (Memphis, TN)
Plane - Special, old - $20 (Memphis, TN) Memphis, TN
Plane. Special (?). If you know the proper name for it please let me know. Approximately 5 1/2\
Wrench, fixed - $5 (Memphis, TN)
Wrench, fixed - $5 (Memphis, TN) Memphis, TN
Wrench, fixed, Casting: VIKING, Approximately 9\
Shackle - old - $5 (Memphis, TN)
Shackle - old - $5 (Memphis, TN) Memphis, TN
Shackle, Casting: M, Approximately 6\
Hand Drill Brace - $5 (Memphis, TN)
Hand Drill Brace - $5 (Memphis, TN) Memphis, TN
Hand Drill Brace. 1950s maybe. Location: Memphis, TNits NOT ok to contact this poster with services or other commercial interests
Screw Drivers, mismatched, old - $5 (Memphis, TN)
Screw Drivers, mismatched, old - $5 (Memphis, TN) Memphis, TN
Screw Drivers, mismatched, old Location: Memphis, TNits NOT ok to contact this poster with services or other commercial interests
Wrenchs, 5, misc - $10 (Memphis, TN)
Wrenchs, 5, misc - $10 (Memphis, TN) Memphis, TN
Wrenches, mismatched, old1- Square head, Casting: MASCOT, Approximately 8\
Solder iron Group - $5 (Memphis, TN)
Solder iron Group - $5 (Memphis, TN) Memphis, TN
Solder irons1- Casting: \
Ball Hammers - $20 (Memphis, TN)
Ball Hammers - $20 (Memphis, TN) Memphis, TN
Ball Hammer group of 31- Casting: Craftsman, Approximately 13\
Splitter Wedges, old - $15 (Memphis, TN)
Splitter Wedges, old - $15 (Memphis, TN) Memphis, TN
Splitter wedge group of  3.1- Casting: none or rusted over, Approximately 9\
Drill motor - $25 (Memphis, TN)
Drill motor - $25 (Memphis, TN) Memphis, TN
Black and Decker model \
Hand Drill brace, old - $5 (Memphis, TN)
Hand Drill brace, old - $5 (Memphis, TN) Memphis, TN
Hand Drill Brace or what is left of one.Missing center wood handle. All stell is there. Location: Memphis, TNits NOT ok to contact this poster with services or other commercial interests
Misc Tools - $10 (Memphis, TN)
Misc Tools - $10 (Memphis, TN) Memphis, TN
Misc Tools1-Ratch pull handle, 12\
Safety Harness - $10 (Memphis, TN)
Safety Harness - $10 (Memphis, TN) Memphis, TN
1- Safety HarnessNo guarntee / warranty. That said I used it and depended on it.  Location: Memphis, TNits NOT ok to contact this poster with services or other commercial interests
Tool box - $20 (Memphis, TN)
Tool box - $20 (Memphis, TN) Memphis, TN
Tool BoxApproximately 13 1/2\
Coil Spring Compression tool - $10 (Memphis, TN)
Coil Spring Compression tool - $10 (Memphis, TN) Memphis, TN
Coil Spring compression tool. Purchased from Auto Zone. Used one time. Location: Memphis, TNits NOT ok to contact this poster with services or other commercial interests
Valve spring Compression tool - $10 (Memphis, TN)
Valve spring Compression tool - $10 (Memphis, TN) Memphis, TN
Valve spring compression tool Location: Memphis, TNits NOT ok to contact this poster with services or other commercial interests
Multi use tool - $1
Multi use tool - $1 memphis, TN
Mulitple use tool. Many uses for around the house or shop. Was selling at $1 each. I have 7500 of these all in cases, make an offer on all of them.its NOT ok to contact this poster with services or other commercial interests
F 450 Super Duty Bucket Trucks and Bucket Vans >>SUPER NICE!!!<< - $6950 (Memphis)
F 450 Super Duty Bucket Trucks and Bucket Vans >>SUPER NICE!!!<< - $6950 (Memphis) Memphis
F450 Bucket Trucks... 29 ft Lifts, Tool Bends, REFURBISHED BACK TO JUST LIKE NEW!!! We have over 20 bucket trucks and bucket vans starting at $6950.00 and Top out around $13950.00 CALL DEAN at 901-246-1045Memphis Cars2505 Summer Ave.Memphis, TN 38112 Location: Memphisits NOT ok to contact this poster with services or other commercial interests
Shopsmith with attachments and Rigid compound miter saw ( Germantown, TN)
Shopsmith with attachments and Rigid compound miter saw ( Germantown, TN) Germantown, TN
Shopsmith Mark V in great condition with all attachments including band saw, joiner and drill press. Most attachments new in box, new speed reducer in box, router bits, new face plate and Nova G3 chuck for lathe new in box,  new saw blade and new band saw blade plus several sizes new in boxes. 12 inch sanding disc with assortment of sanding discs.  New bowl turning kit in box, tool sharpening jig.  If you are looking for a complete shopsmith set up this is it for a bargin price of $1500.Rigid compound miter saw $150 Location:  Germantown, TNits NOT ok to contact this poster with services or other commercial interests
Adjustable bent handle wrench - $35 (Memphis, TN)
Adjustable bent handle wrench - $35 (Memphis, TN) Memphis, TN
Adjustable Bent Handle wrench. Casting: BARCAL (?). Approximately 12\
Tongs / Cutters - $15 (Memphis, TN)
Tongs / Cutters - $15 (Memphis, TN) Memphis, TN
Tongs / Cutters. Casting: ACME CAPEWELL HARTFORD USA. Approximately 14\
Spoke Shave Plane - $25 (Memphis, TN)
Spoke Shave Plane - $25 (Memphis, TN) Memphis, TN
Spoke Shave Plane. I found several different names on the net. Look at the picture call it what ever you want. Location: Memphis, TNits NOT ok to contact this poster with services or other commercial interests
Adjustable wrench - $5 (Memphis, TN)
Adjustable wrench - $5 (Memphis, TN) Memphis, TN
Adjustable wrench. Casting: 79 (?). Approximately 8 1/2\
Adjustable wrench - $25 (Memphis, TN)
Adjustable wrench - $25 (Memphis, TN) Memphis, TN
Adjustable wrench. Casting: MADE IN USA 9 AUTO. Approximately 9\
Tire repair kit - old - $10 (Memphis, TN)
Tire repair kit - old - $10 (Memphis, TN) Memphis, TN
Tire Tube Patch kit and tools - 1 KNICKS No. 260 box including tube of glue and some patch material, Knocks Mend-Rite Co. 1447 Gentry, North Kansas City, MO. and 2 patch tools. This is sold as a collectible. I displayed this in the trunk of my car during car shows. My guess is this was made in the 1950s. I dont think you want to try to patch a tire with this. Location: Memphis, TNits NOT ok to contact this poster with services or other commercial interests
Spoke Cutter - old - $35 (Memphis, TN)
Spoke Cutter - old - $35 (Memphis, TN) Memphis, TN
Spoke Cutter (?). Casting: The A. A. Wood & Sons CO.. It has a measuring scale cast in one side. Approximately 6\
Draw Knife - $10 (Memphis, TN)
Draw Knife - $10 (Memphis, TN) Memphis, TN
Draw Knife. Casting: DUNLAP. Approximately 14\
Lesco fertilizer spreader - cash only - $150 (memphis, tn)
Lesco fertilizer spreader - cash only - $150 (memphis, tn) memphis, tn
Lesco commercial fertilizer spreader. used one summer and then i chose to go all or mostly liquid fertilizer, i have a smaller spreader anyway. if your putting out alot of granular this is the one you need. they are 369.00 plus tax new (not assembled)  so thats over 400.00 total! sometimes they go on sale for 299.00 + tax = 326.65(not assembled). comes w cover. must pick up. price is FIRM-FIRM-FIRM. Im getting ripped off at 150 anyway. ebenkirk@yahoo.com -no scammers please, i know what to look for.  Location: memphis, tnits NOT ok to contact this poster with services or other commercial interests
Heavy Equipment Shackles - $75 (Memphis, TN)
Heavy Equipment Shackles - $75 (Memphis, TN) Memphis, TN
Total of 4:  3 - Crosby 9 1/2 Ton (1 1/8\
Sling Blabe - $25 (Memphis, TN)
Sling Blabe - $25 (Memphis, TN) Memphis, TN
Sling Blade, bow shape, Approximately 33\
ACME Hand Crank Drill Press - $350 (Memphis, TN)
ACME Hand Crank Drill Press - $350 (Memphis, TN) Memphis, TN
ACME wall mount, hand crank, drill press. Everything works. The assembly is approximately 36\
Floor Vise - $150 (Memphis, TN)
Floor Vise - $150 (Memphis, TN) Memphis, TN
Floor Vise, Approximately 41\
Anvil - $100 (Memphis, TN)
Anvil - $100 (Memphis, TN) Memphis, TN
Anvil. A name is cast in the side VUL??. The casting has an image of an arm holding a hammer. The unit is approximately 11\
Pipe Vise - $50 (Memphis, TN)
Pipe Vise - $50 (Memphis, TN) Memphis, TN
Pipe Vise, Holland, Approximately 15\
Wooden Plane - $50 (Memphis, TN)
Wooden Plane - $50 (Memphis, TN) Memphis, TN
Wooden Plane. Approximately 16\
Plane - Stanley 45 - $150 (Memphis, TN)
Plane - Stanley 45 - $150 (Memphis, TN) Memphis, TN
Stanley Combined Plow and Beading Plane, Stanley No. 45.,complete with box, with 15 blades, with spreader bars. Location: Memphis, TNits NOT ok to contact this poster with services or other commercial interests
Mantel V belt X flat belt - $25 (Memphis, TN)
Mantel V belt X flat belt - $25 (Memphis, TN) Memphis, TN
Mantel, 2 V belt X 1 flat belt. Approximately 10\
Lifting Block - old - $25 (Memphis, TN)
Lifting Block - old - $25 (Memphis, TN) Memphis, TN
Lifting Block, one wooden pulley, one half of casting is identified with H235. The other half has a casting H238. Approximately 12\
Adjustable bent handle wrench - $35 (Memphis, TN)
Adjustable bent handle wrench - $35 (Memphis, TN) Memphis, TN
Adjustable bent handle wrench. Casting: FORDSON THE KEYSTONE MFRG CO BUFFALO, NY, USA. Approximately 10\
2 Horsepower Demolition Hammer&Electric Laser-Guided Orbital Jigsaw - $40 (Bartlett)
2 Horsepower Demolition Hammer&Electric Laser-Guided Orbital Jigsaw  - $40 (Bartlett) Bartlett
2 Horsepower Demolition Hammer Runs but in poor condition no chisel Six variable speed settings from 900 to 1800 BPM 11 amps Accepts 3/4\
Res Q Ladder for fire Escape - $40 (southeast Memphis / Olive Branch area)
Res Q Ladder for fire Escape - $40 (southeast Memphis / Olive Branch area) southeast Memphis / Olive Branch area
Res Q Ladder 15 Ft., 2 Story, Makes almost any window sill an instant FIRE Excape., 1500 lbs, Light Weight - Easy to lift, Attaches to almost any window sill, Special feature keeps ladder away from wall, Stores easily under window or bed, Rust Proof, Reflets in the dark for greater safety. NEW in box, comes with instructions. These sell for $100 plus, I just dont have any use at my location. Asking $40.00 Call 901-626-7957  Location: southeast Memphis / Olive Branch areaits NOT ok to contact this poster with services or other commercial interests
Snap On Tool Box - $350 (Atoka)
Snap On Tool Box - $350 (Atoka) Atoka
This is new from Snap On.Scratch and Dent but in good shapeCall 901-217-2325 or 901-258-1624 Location: Atokaits NOT ok to contact this poster with services or other commercial interests
Miller Industrial Stick Welder - $350 (Atoka)
Miller Industrial Stick Welder - $350 (Atoka) Atoka
250 AmpAC Polarity220 VoltApprox 60 stinger cableWorks greatComes with cart on wheelsCall 901-217-2325 or 901-258-1624 Location: Atokaits NOT ok to contact this poster with services or other commercial interests
Porta Nailer Floor Nailer - $100
Porta Nailer Floor Nailer - $100 memphis, TN
I have a porta nailer for sale.  Excellent condition.  100.00its NOT ok to contact this poster with services or other commercial interests
Milwaukee Right Angle Drill - $125
Milwaukee Right Angle Drill - $125 memphis, TN
Milwaukee Right Angle Drill used on my house.  Excellent condition.  125.00its NOT ok to contact this poster with services or other commercial interests
Power tools (new and name brand, some used), hardware, HVLP, more (Arlington, TN)
Power tools (new and name brand, some used), hardware, HVLP, more (Arlington, TN) Arlington, TN
HARDWARE (ALL NEW & 21\