1998 FEATHERLITE V NOSE TWO HORSE BUMPER PULL TRAILER. THIS TRAILER IS LOADED WITH ALL OF THE OPTIONS THAT ONE WOULD WANT INCLUDING WALK THROUGH DOOR INTO TACK/DRESSING ROOM,TWO MANGERS, 6WIDE, 72 TALL, 19TOTAL LENGTH, TWO DROP DOWN FEED WINDOWS THAT ARE LOCKABLE, FULL BARN DOORS ON REAR, ALUMINUM RUNNING BOARDS DOWN THE SIDES FOR EASY ACCESS, AMERICAN RACING CUSTOM WHEELS WITH BRAND NEW TIRES, FRONT ENTRANCE DRESSING/TACK ROOM WITH TWO SADDLE TREES UNDER THE MANGERS,BRUSH BOX, CLOTHES RACKS, TACK HOOKS, FULL INTERIOR LIGHTS, TWO OVERHEAD VENTS, KICK PADS, FULL HEAVY DUTY FLOOR PADS, CUSTOM BUILT SHELVES IN DRESSING/TACK ROOM THAT ARE EASILY REMOVABLE IF DESIRED. THIS FEATHERLITE TRAILER IS IN EXCELLENT CONDITION AND IS EXTREMELY LIGHT AND EASY TO PULL WITH ALMOST ANY VEHICLE. IT COMES WITH STABILIZER BARS FOR EASY TOWING AND A 7 PIN LIGHT/BRAKE PLUG. EVERYTHING WORKS PROPERLY AND IT LOOKS AWESOME. PLEASE FEEL FREE TO EMAIL ME TO DISCUSS A BUY IT NOW PRICE. THANKS FOR LOOKING AND GOOD LUCK. franchise Jamie first came into contact with the New Men during a very public battle between them and their member Reign and an enemy/old ally Khyber the gem Reign was on his forehead had mind controlling properties and caused him to on a minor rampage Jamie had been searching for the New Men with help of her friend Paul who knew New Men member Exit after putting a boy in a coma with her powers here Jamie accidentally exhibited a brief burst of Dash the teams femaleThe album was not commercially successful (the only track which became hit was Vreme je za nas ) and the band disbandedwould form up at the front of the legion and harass the enemy with javelin fire to cover the advance of the Location: Western Kyits NOT ok to contact this poster with services or other commercial interests

1998 FEATHERLITE V NOSE TWO HORSE BUMPER PULL TRAILER. THIS TRAILER IS LOADED WITH ALL OF THE OPTIONS THAT ONE WOULD WANT INCLUDING WALK THROUGH DOOR INTO TACK/DRESSING ROOM,TWO MANGERS, 6WIDE, 72 TALL, 19TOTAL LENGTH, TWO DROP DOWN FEED WINDOWS THAT ARE LOCKABLE, FULL BARN DOORS ON REAR, ALUMINUM RUNNING BOARDS DOWN THE SIDES FOR EASY ACCESS, AMERICAN RACING CUSTOM WHEELS WITH BRAND NEW TIRES, FRONT ENTRANCE DRESSING/TACK ROOM WITH TWO SADDLE TREES UNDER THE MANGERS,BRUSH BOX, CLOTHES RACKS, TACK HOOKS, FULL INTERIOR LIGHTS, TWO OVERHEAD VENTS, KICK PADS, FULL HEAVY DUTY FLOOR PADS, CUSTOM BUILT SHELVES IN DRESSING/TACK ROOM THAT ARE EASILY REMOVABLE IF DESIRED. THIS FEATHERLITE TRAILER IS IN EXCELLENT CONDITION AND IS EXTREMELY LIGHT AND EASY TO PULL WITH ALMOST ANY VEHICLE. IT COMES WITH STABILIZER BARS FOR EASY TOWING AND A 7 PIN LIGHT/BRAKE PLUG. EVERYTHING WORKS PROPERLY AND IT LOOKS AWESOME. PLEASE FEEL FREE TO EMAIL ME TO DISCUSS A BUY IT NOW PRICE. THANKS FOR LOOKING AND GOOD LUCK. of which it was hoped that it could produce at first twenty and later thirty vehicles per month In reality this number was never attainedof the atoms present in the sample Because the nuclei of all atoms are compact and of comparable size neutrons are capable of interacting strongly with all atoms This is in contrast to X-ray techniques where the X-rays interact weakly withThe surfaces of Uglows paintings carry many small horizontal and vertical markings where he recorded these coordinates so that they could be verified against reality Location: Western Kyits NOT ok to contact this poster with services or other commercial interests

For Sale: Brand new in the box, still has the straps on it, Delta Dust Collector. I bought this for my shop, but am going to use the one I inherited from my Dad instead. These are around $450 new depending on where you buy them. Im asking $250 cash, no trades. Thats a really good savings and you still have a brand new dust collector. Below is a list of what is included in the box. -------------------------- Delta Industrial Model 50-850 1 1/2HP Dust Collector includes a 1 1/2HP motor and blower, one 5-micron filtration bag, two plastic 6 mil. chip bags, support drum, two 4\" diameter dust intake ports, one 6-foot hose, 1 intake port cap, base, four swivel caster assemblies, cord and plug, and instruction manual Location: W. Ky.its NOT ok to contact this poster with services or other commercial interests

Specs = Inverter: Digital Plasma Cutter with TOSHIBA MOSFETs Model: EV-CUT40D (40 amp) Category: Plasma CutterMosfet / Fuji and Toshiba Technology: Operating Voltage: 208/220vac 50/60HZ Single Phase or 110/120vac 50/60HZSingle Phase. @40amps it draws 22.7amps at 5KVA - @31amps it draws 17.6ACutting Specs: 3\" Per minute @ 3/4\" steel (Severance Cut). 7\" Per minute @ 1/2\" Thick steel. 17\" Per minute @3/8\" thick steel. High Frequency and Contact Start: High Frequency DC Plasma cuts thicker materials thanstandard DC plasma cutters. This 40amp Digital Inverter Plasma cutter cuts like a 60amp standard DC plasmacutter! High Frequency Plasma cutters are faster with less distortion in your metal (less heat). Power Specs:Power Factor 0.93 - 100% Duty cycle (cut time) at 31amps. 60% Duty cycle at 40amp cut setting (you can cut for6 minutes out of 10 minutes at 40 amps).Internal High Speed Cooling Fan to Regulate Temperature. It has built in Thermal & Overload Protection.Air requirements: 50-75psi @ 3.5cfmWeight: 25LBS (28LBS Boxed) Dimensions: 15\"Length X 9\"High X 6\"WideWhats Included? Main Unit * Cutting Torch * Earth Clamp 10 cord * Air Regulator with Bracket * Air HoseConsumables: 10 pieces of tips (nozzles), 10 pieces of electrodes, 5 pieces of gas diffuser, 5 pieces of shield cups.5 year warranty!!!!!!1/2 the price and more power than a Miller, Hypertherm, ESAB or Lincoln!FREE SHIPPING!!!!!!!If interested you can call 561 -718- 5570its NOT ok to contact this poster with services or other commercial interests

THIS IS A HIGH END CONTRACTOR SERIES DEVILBIS/DEWALT COMPANY 7250 WATT SURGE/ 6000 WATT CONTINUOUS, ELECTRIC START GAS POWERED GENERATOR WITH THE BEST [[INDUSTRIAL PLUS]] BRIGGS AND STRATTON, ELECTRIC START, CONTRACTOR SERIES 11 HP INDUSTRIAL ENGINE. THIS IS A HIGH END GAS GENERATOR THAT WILL RUN AN ENTIRE HOME OR A LARGE RV/MOTORHOME SO IT WOULD BE PERFECT FOR CAMPING OR FOR THE ENTIRE HOUSE DURING AN EMERGENCY. THE GENERATOR IS ELECTRIC START SO IT IS EXTREMELY EASY TO START FOR OLDER PEOPLE OF CHILDREN AS WELL. YOU JUST PUSH A BUTTON AND IT STARTS AND RUNS EVERYTIME....AND RUNS EXCELLENT! THIS GENERATOR HAS BOTH 110-120 AND 220-240, SO IT WILL RUN LARGE ITEMS AND IT HAS THE LARGE FEMA PLUG FOR A TRANSFER SWITCH OR MOTORHOME/ RV HOOK-UP. IT IS USED SO IT SHOWS NORMAL WEAR SUCH AS SCRATCHES AND NICKS, BUT IT STARTS UP AND RUNS EXCELLENT EVERYTIME! THIS IS A LARGE, TOP OF THE LINE INDUSTRIAL MACHINE MADE BY DEVILBIS FOR CONTRACTOR/INDUSTRIAL USE SO IT WILL LAST FOREVER. THIS MACHINE WILL RUN AROUND 12 HOURS ON A FULL TANK OF GAS WITH A MEDIUM LOAD....AROUND 10 HOURS WITH A BIGGER LOAD. THIS SETTUP HAS THE LOW ENGINE SHUTDOWN SO YOU DOWN HAVE TO WORRY AB OUT THE ENGINE BLOWING UP WHILE YOUR NOT AROUND. THE RECEPTACLES ARE GFCI SO IT IS SAFE AS WELL. IF YOU HAVE ANY QUESTIONS FEEL FREE TO ASK. THANK YOU Location: GRAVES COUNTYits NOT ok to contact this poster with services or other commercial interests

Reply to: debra0002@gmail.com1998 FEATHERLITE V NOSE TWO HORSE BUMPER PULL TRAILER. THIS TRAILER IS LOADED WITH ALL OF THE OPTIONS THAT ONE WOULD WANT INCLUDING WALK THROUGH DOOR INTO TACK/DRESSING ROOM,TWO MANGERS, 6WIDE, 72 TALL, 19TOTAL LENGTH, TWO DROP DOWN FEED WINDOWS THAT ARE LOCKABLE, FULL BARN DOORS ON REAR, ALUMINUM RUNNING BOARDS DOWN THE SIDES FOR EASY ACCESS, AMERICAN RACING CUSTOM WHEELS WITH BRAND NEW TIRES, FRONT ENTRANCE DRESSING/TACK ROOM WITH TWO SADDLE TREES UNDER THE MANGERS,BRUSH BOX, CLOTHES RACKS, TACK HOOKS, FULL INTERIOR LIGHTS, TWO OVERHEAD VENTS, KICK PADS, FULL HEAVY DUTY FLOOR PADS, CUSTOM BUILT SHELVES IN DRESSING/TACK ROOM THAT ARE EASILY REMOVABLE IF DESIRED. THIS FEATHERLITE TRAILER IS IN EXCELLENT CONDITION AND IS EXTREMELY LIGHT AND EASY TO PULL WITH ALMOST ANY VEHICLE. IT COMES WITH STABILIZER BARS FOR EASY TOWING AND A 7 PIN LIGHT/BRAKE PLUG. EVERYTHING WORKS PROPERLY AND IT LOOKS AWESOME. PLEASE FEEL FREE TO EMAIL ME TO DISCUSS A BUY IT NOW PRICE. THANKS FOR LOOKING AND GOOD LUCK. Niedernberg A Scherer CR Busch AE Kostenis E (2002) Comparative analysis of human and rat S1P(5) (edg8)Koropi East Attica 1896 Summer Olympics Acharnes Afidnes Agios Konstantinos East Attica Agios Stefanos Anavyssos Anixi Anthousa Anthoussa /(2001) Nrg-1 belongs to the endothelial differentiation gene family of G protein-coupled sphingosine-1-phosphate receptors Location: Western Kyits NOT ok to contact this poster with services or other commercial interests

Craftsman 10” Radial Saw from Sears.Saw comes with the blade that is on it, the manual, and the tools for adjusting the saw, ETC.... Added rollers to the legs, that also is included. 2.5 horse power. Has safety switch & the saw is fully adjustable. Asking $180.00 Or Best Offer (OBO). Serious offers only. Please contact with any questions or additional information. The saw is a little dusty because it still works & has been used. Nothing a little dusting off cant take care of.Thanks. Location: Reidland-Paducahits NOT ok to contact this poster with services or other commercial interests

Rigid #2 ratcheting pipe reamer. 1/8\" - 2\" capacity with straight flutes. Brand new. Location: Hopkinsvilleits NOT ok to contact this poster with services or other commercial interests

Brand new, still on the pallet Delta 10\" Unisaw. This is a professional saw that is to be used in a shop setting and is not portable. It has a 3 hp. 220v single phase motor and right hand wing extension to allow larger sheet goods to be easily cut. The image is a catalog image of the saw. The mobile base shown is not included with this saw. It is an accessory item and I did not purchase one.The reason for the sale: Bought this a couple of years ago with the intention to build up my own woodworking shop. Dad passed away shortly after I bought it. Dad had an older Delta Unisaw that I am going to keep. Mom is now ready to sell the house and I do not want to deal with trying to move and store it. This is a really nice piece of equipment and is worth the price that I am asking.I gave a little over $1800 for the saw.Im asking $1350 cash for it. That is a really good price for a brand new, professional saw. You will not be disappointed with this saw. They are very nice saws that last a lifetime. Location: W. KYits NOT ok to contact this poster with services or other commercial interests

Craftsman 10” Radial Saw from Sears.Saw comes with the blade that is on it, the manual, and the tools for adjusting the saw. Added rollers to the legs, that also is included. 2.5 horse power. Has safety switch & the saw is fully adjustable. Asking $190.00 Or Best Offer (OBO). Serious offers only. Please contact with any questions.Thanks. Location: Reidland-Paducahits NOT ok to contact this poster with services or other commercial interests

black in color please contact at 270 860-3036

stickwelder with owners manual needs new lead cablescontact at 270-860-3036

30\" Buss planer, need work $1000 or parts. 14\" Dewalt arm saw, 28\" travel, single phase, several blades, $450, 618 654 8044

FMC/John Beam 600 Series. Cuts drums and rotors. Works great.

Delta 10 table saw. Contractor Grade. Works Great!