This is an Iron bench 20x30x38high. It also has a shelf on the bottom. This is a heavy bench that can be used to mount saws, sanders, drill presses, grinders, etc.$40316-640-0457 Location: Wichitaits NOT ok to contact this poster with services or other commercial interests

15-Gal. Air Compressor, 1Hp. Belt Drive, 115/220 Volt Dayton, Runs Great$80. 316-806-9208 Location: S. Wichita, Ks.its NOT ok to contact this poster with services or other commercial interests

Weather Guard 664. Retails $500-$600 new. Im asking $250. 776-0119 Location: Rose Hillits NOT ok to contact this poster with services or other commercial interests

Purchased new in 05, we own a Wood-Mizer Rip Saw with the lazer kit included. Excellent, excellent condition. Hardly used, and hate to see it collect dust. Must see if in the market for this machine. Priced to sell. Bought new in 05 for over $14,000. Call Joe for more information, 316-650-9124. Location: Garden Plain, Ks.its NOT ok to contact this poster with services or other commercial interests

snap-on top box like new 1500 obo call at 316 323 2195 Location: wichitaits NOT ok to contact this poster with services or other commercial interests

Items for sale are a Porter Cable brad nailer, Skil X Drive 18 volt cordless drill, wet tile saw, and a Dewalt 4 1/2 in grinder. Would like to sell these all together but will consider selling them separately. I dont have a digital camera so the photos are of the new model of the tool but are the same exact model of the tools for sale. The tools are all in excellent condition and have only been used lightly. Location: Emporiaits NOT ok to contact this poster with services or other commercial interests

4.8 Volt makita drill. Asking $10. Works fine. E-mail me at jballii@att.net Location: Wichitaits NOT ok to contact this poster with services or other commercial interests

This is a Texspray compact HP. hers a link tp the exact item http://wwwd.graco.com/Distributors/DLibrary.nsf/Files/308718/$file/308718G.pdf ... or, go to the graco site and search literature for the item. This is a generic pic of the item.E-mail me or call 871-6895 and leave msg. Location: El Doradoits NOT ok to contact this poster with services or other commercial interests

5000lb capacity forklift for sale for $5,500.00Allis Chalmers 1811 Hours Triple Mast Pneumatic Tires-Indoor/Outdoor Use Brakes, transmission, and mast all work well. Serviced reqularly. We are currently moving locations and selling our extra forklift. Forklift is available to view by appointment only. We accept cash or credit card. Pricing does not include sales tax. Questions please call (316) 267-8027 Location: Wichita its NOT ok to contact this poster with services or other commercial interests

Craftmans Joiner for sale for $200.00. We are currently moving locations and selling extra tools. These machines can be picked up or we offer delivery for $150.00 within city limits. We will accept cash or credit card. Pricing does not include tax. Questions please call 316-267-8027. Location: Wichita its NOT ok to contact this poster with services or other commercial interests

Delta stand up scroll saw for sale for $100.00. We are currently moving locations and selling various tools. They are available to view by appointment only. These machines can be picked up or we offer delivery for $150.00 within city limits. We will accept cash or credit card. Pricing does not include tax. Questions please call 316-267-8027. Location: Wichita its NOT ok to contact this poster with services or other commercial interests

GRUVLOK ROLL GROVER, GRINNELL CORPORATION, MODEL #1021, S/N 90081643. SEE AT BEST SUPPLY COMPANY LOCATED AT 1545 E. 29TH STREET NORTH OR CALL 316-262-8336. HOURS OF OPERATION: MONDAY - FRIDAY 7:00 A.M. - 4:00 P.M. ALL REASONABLE OFFERS CONSIDERED. Location: WICHITA, KSits NOT ok to contact this poster with services or other commercial interests

LECTRO TRUCK OPERATES USING BASIC PRINCIPLES OF LEVERAGE AND BALANCE. BATTERY POWERED, MOTOR DRIVEN. THIS MACHINE IS IN LIKE NEW CONDITION, NEW BATTERY, CHARGER, AND ATW ATTACHMENT. THIS PRICE IS PICKUP ONLY. THE LECTRO TRUCK DOES THE HEAVY WORK WHILE THE OPERATOR CONTROLS THE MOVES. CONTACT PHIL AT 620-496-2222 Location: LaHarpe, KSits NOT ok to contact this poster with services or other commercial interests

I HAVE A CLARKE 1/2 HP BENCH GRINDER FOR SALE. WITH A 6 INCH GRINDER DISK ALONG WITH A NEW 6 INCH WIRE BRUSH. $30.00 OR BEST OFFER. DAVID, 619-2324 Location: ANDOVERits NOT ok to contact this poster with services or other commercial interests

220 MPH 12 AMPS HANDHELD YARD VAC WITH BAG. ELECTRIC 75 FT CORD.Great for hi- vac yard cleanup. Comes with a bag CALL 978-1860 Location: WICHITAits NOT ok to contact this poster with services or other commercial interests

This is a floor standing 16mm drill press. It has had very little use so it is in great shape.This is a 16 speed drill. Location: Wichita, KSits NOT ok to contact this poster with services or other commercial interests

This is an old table saw that comes with a planer and all on a very sturdy table stand. They just dont make em like this anymore. We are selling it with several blades for both the saw and planer. We are asking $175 obo. It works just fine and even comes with the original owners book. Location: Wichita, KSits NOT ok to contact this poster with services or other commercial interests

Big sale Saturday the 13th at Sears Parts and Repair, 11333 E Kellogg, SE corner of Kellogg and Greenwich. 10% off scratch and dent tool storage! 10 % off reconditioned vacs! more stuff on sale!Please bring loading assistance! Come check us out. Location: Sears Parts & Repairits NOT ok to contact this poster with services or other commercial interests

Frame, sheet,set windows, and even side the wall laying down and use these jacks to lift it into place without breaking a sweat. Use on one house and the money you saved in renting a crane or lift paid for these two jacks. its NOT ok to contact this poster with services or other commercial interests

HAVENT USED THIS IN TEN YEARSBRAND---WYCO---- Model ---DM35-10SEE PICTURES!CALL ---316----214-4228I HAVE AIR COMPRESSOR YOU CAN TEST IT IF YOU LIKE!THANKS FOR LOOKING! Location: WICHITA,KSits NOT ok to contact this poster with services or other commercial interests

Dewalt DW871 chop saw. 14inch blade 15 amp motor. 3800rpm. has a 1inch arbor. I dont us it anymore so it is out of the storage and on Craigslist.... I work at the airport in Wichita so I can bring it to Wichita. The first $75 takes it. Email or Call 620.755.4440 Thanks Location: Kingman Ksits NOT ok to contact this poster with services or other commercial interests

I have a car dolley I need to sell ASAP , dolley is in very good conditions also has straps and spare tire. Call me at 316 300-0810 Location: Wichitaits NOT ok to contact this poster with services or other commercial interests

Mouse Sander and case. Location: Bentley, KSits NOT ok to contact this poster with services or other commercial interests

12 in band saw works great with 3 extra blades 316-755-2666 Location: wichitaits NOT ok to contact this poster with services or other commercial interests

11 AMP circular saw. Location: Bentley, KSits NOT ok to contact this poster with services or other commercial interests

12 ton pipe bender exellent condition hardly used $50 firm #316-880-2921 Location: wichitaits NOT ok to contact this poster with services or other commercial interests

Manual tile cutter. Location: Bentley, KSits NOT ok to contact this poster with services or other commercial interests

New hose reel for air or water shop hose. This is a very expensive reel that never got installed. $150.00. Location: Wichitaits NOT ok to contact this poster with services or other commercial interests

Band Saw - STihl F5 55R Location: Wichita, KSits NOT ok to contact this poster with services or other commercial interests

Misc Tools, clamps, wrenches, jack stands, jack hand saw,tire irons Location: Wichita, KSits NOT ok to contact this poster with services or other commercial interests

Auto Ramps Location: Wichita, KSits NOT ok to contact this poster with services or other commercial interests

SET OF 5 NMTB 50 TAPER SIDE LOCK END MILL ADAPTERS 3/8\", 1/2\", 5/8\", 3/4\" & 1\" BRAND NEW NEVER USED. CAN BE USED IN QUICK CHANGE 50 SPINDLES AS WELLits NOT ok to contact this poster with services or other commercial interests

John Deer L110 Automatic Tractor / Mower. Includes trailer and Spreader Location: Wichita, KSits NOT ok to contact this poster with services or other commercial interests

Maximizer work station rollaway tool box 5ft 6 in long by 2ft 4in wide by 4 ft high 14 drawers - 1 at 60 in by 25 in by 6 in deep 8 at 38 in by 25 in 5 at 19 in by 25 in butcher block worktop and rubber mat Call Bill at 804-586-7773 or cell # 804-586-7773 Location: Wichitaits NOT ok to contact this poster with services or other commercial interests

RYOBI Tiller/Cultivator 1.2 hp, not a remanufactured unit Used once for a flower garden Call Bill at 316-927-2180 or Cell# 804=586-7773 Location: S. Wichita its NOT ok to contact this poster with services or other commercial interests Location: Wichitaits NOT ok to contact this poster with services or other commercial interests

Cement buggies for wheeling concret contact Moses at 316-259-8979 or 316-838-2508 Location: Park City, Kansasits NOT ok to contact this poster with services or other commercial interests

Large blower fans , 1/2 hp motor, 12in drum with precise speed control. very high output. Can be used for exhaust or blower applications. Will move lots of air.Have 30 in stock make offer for all or $ 50 per unit. Call 978-1860. Makes a great shop fan for max airflow price reduced to $40 per unit with purchase of two or more. Location: wichitaits NOT ok to contact this poster with services or other commercial interests

It came off a working Fisher Snow Plow that was parted out. I was going to use it to convert my manual tube bender to hydralic. I sold the bender so I dont need it.$125.00 obo316-661-2293Greg Location: Mount Hopeits NOT ok to contact this poster with services or other commercial interests

Missing some parts, so 20. gets it.95 S. & B-way in Waco. Location: Wacoits NOT ok to contact this poster with services or other commercial interests

rated at 2/3hp ball bearing induction motor, 6amp., generous space between chuck and table = approx 17\", and chuck to base is like 20-21\". quill travel is 2 3/8\". Also has laser function (if thats your thing) which worked accurately in store through mutliple heights of table. Has the usual raise/lower table and 45degree tilt to the table. 12 speeds (250-3100rpm) via 3pullies/2belts on top. top comes off with a thumb latch, not a dopey bolt or screw. Has a \"X\" groove for bolting to the table. Very Good Condition... $100.00316-661-2293 Location: Mount Hopeits NOT ok to contact this poster with services or other commercial interests

old saber saw attachment for drill motor. Location: Augustaits NOT ok to contact this poster with services or other commercial interests

http://www.naautoequipment.com/garage-parking-lifts.html 866-607-4022 Location: Witchitaits NOT ok to contact this poster with services or other commercial interests

Sharpen any tool you have!This is a model 1055 SHARP-ALL From FOLEY-BELSAWsee the pictures belowNever used, has extra pieces, chainsaw attachment, sharpen circular saw blades, mower blades, scissors, ect.for the asking price ill throw in $130 diamond grinding wheel for carbide grinding!Cost Over $1200.00 new! See Web site at ( www.foley-belsaw.com )OR https://shop-foley-belsaw.com/foley/1055_SHARP-ALL_G3551.prodMake me a offer! Call me at------- 316-----214-4228-----cell phone Location: WICHITA,KSits NOT ok to contact this poster with services or other commercial interests

10ft. long van conduit storage boxes 2 at $100.00 ea. Make me an offer! Need the space in my garage 316-990-1025 Location: El Doradoits NOT ok to contact this poster with services or other commercial interests

8ft bedside storage boxes (2) black aluminum $300.00 for the pair, Make offer, have to get them out of my garage! 316-990-1025 Location: El Doradoits NOT ok to contact this poster with services or other commercial interests

Nice collector Used only one week!Snorkel can be positioned anywhare you want it!For dust - weld fumes - grinding , fiberglass, carbon fiber, stone, metal, whatever?On wheels move anywhare in shop you need it.Great Condition single phase 110 ----3/4 hp---- 3450 rpm suction motor.Hepa air return filterUse in air conditioned shop!Asking $800.00Call me --316-214-4228--With any QuestionsAlso have 2 downdraft grinding tables in other listing Location: WICHITA,KSits NOT ok to contact this poster with services or other commercial interests

I have a Lincoln SA 200 portable welder. Its an 82 model with the copper windings. It has been upgraded with 300 amp brushes in the windings. This welder welds awesome. I bout it from a rebuild shop in ponca city. The windings have been redone and the motor has been gone through. It starts and runs very well. I just recently had the Mag rebuilt on it and also installed a brand new carburator. It has the oil changed regularly and it also has a newer battery and new plugs and wires. It comes with the trailer that it is mounted on with a tool box and all of the bottle racks. If you have any questions or would like to view it feel free to email me or call me at 620-930-8132, ask for Matthew. Thanks for looking. Location: Medicine Lodgeits NOT ok to contact this poster with services or other commercial interests

Nice grinding or sanding table =====dust collerctors!I have two of these bought but never used!they have minor dings and scratches that dont efect theway they work !Top grate has soft coating diped on it but is made of heavy stainless steelWork area is 25 inches deep. AND 32 inches wide.Can be used together for big parts 64 in wide see picture!They have removable dust shields that help direct grinding dust to the collector.Down-draft type tables, with 110 volt 1 1/2 hp suction motors,air operated filter cleaner wirh adjustable timer built in,Can be used in air conditioned shop they clean the dustthen return air back to room no exterior vent is needed!SOLD ONE AND 2 FILTERS Asking $800.00 for last one ))))) AND I have 6 new filters left @ $40.00 EACH ((((((Any questions ill try to answerCall me ---316-214-4228---anytime my cell phoneAlso have portable snorkel type dust collector, welding fume collectorwith hepa filter for air conditioned weld, grind shop in other listing!Thanks for looking Location: WICHITA,KSits NOT ok to contact this poster with services or other commercial interests

Need the room in my garage. Old but good and solid. My Fathers saw. See pictures below. Contact for questions or offers. Location: Wichitaits NOT ok to contact this poster with services or other commercial interests

this is a 10 inch craftsman band saw works,75.00 316-993-7101 Location: park cityits NOT ok to contact this poster with services or other commercial interests

Powerbase 5000, Model # PM0545305.02 * 5000 Watts/6250 Surge Watts. * 120/240 volt with circuit breaker protection. * 5 Gallon Gas Tank ( Run time Approx 6 hours at 50% load. 10 HP Briggs and Stratton Motor. I bought 4-5 years ago in case of power outages, but have never had to use except to test it once a year. I will not ship this. Must be picked up. I am asking $300 If interested, give me a call at 558-8288. Im in Wichita,Kansas Location: Wichita,Kansasits NOT ok to contact this poster with services or other commercial interests

WORKS PERFECT....I TOOK A CLOSE PICTURE SO ALL INFO COULD BE SEEN.... Location: WICHITAits NOT ok to contact this poster with services or other commercial interests

WORKS GREAT...NO HOSE... Location: WICHITAits NOT ok to contact this poster with services or other commercial interests

This is a very nice small compound miter saw by Central Machine. In great condition. Call 316-440-3179. Location: Derbyits NOT ok to contact this poster with services or other commercial interests

Never used CORD PRO -- $6 eachWind cord on caddy. To use . . . plug cord into outlet, lay Cordpro on the ground and pull end of cord to needed appliance or tool. Cordpro will unreel just the right length of cord as it slides with you.Call 648-1341 Location: NW Wichitaits NOT ok to contact this poster with services or other commercial interests

5hp Dayton Industrial Blower3500 RPM 220 voltmodel 3KX03 Location: Wichitaits NOT ok to contact this poster with services or other commercial interests

Ingersoll Rand Upright Compressor Model SS3-E. Very gently used, maintained well and in great working condition. Call for specifications. Call or text 650 9133 Location: Wichita NEits NOT ok to contact this poster with services or other commercial interests

***Acra mill, Digital Readout, 10x54 table, power feeds in quill, X axis, and Y axis. One shot lubrication system. $6000.00.Located in Wichita.Can help with delivery.Don316-990-0149

i have 1 hose reel for sale its 1/2 inch hose,asking 50.00 or best offer

Craftsman 1\" stroke Auto Scroller Saw, Model 315.17290. Vintage (very heavy) Black & Decker 1/4\" utility drill. 2 18 V drills, one Chicago. Dont find a brand on the red one. 1 charger. These all do work. Husband died last summer and Im trying to clear out the shed, downsize and just pay bills. Blue Duplex toolbox, 16\" long, 7\" back to front and 5\" deep (to hasp). Asking $50 for all. 316-201-6654 after 2 PM please.

this is and old bandsaw made by craftsman.motor works.wheels turn.needs new band.rod comes out of cylinder when extended may be able to see in picture.power cord has electrical tape on it from repair.located in Belle Plaine. if you have any questions let me know and ill get back to you as soon as i can thank you.

UP FOR SALE IS AN OZONE GENERATOR THAT I PURCHASED FOR MY BUSINESS BACK IN 2004. I PAID 499.00 AND IT DEFINITELY GETS RID OF THE ODORS. I USED TO RE-FINISH BATH TUBS IN HOTELS AND FOUND THIS TO BE THE MOST EFFECTIVE WAY OF GETTING RID OF THE PAINT FUMES. THE UNIT STILL WORKS WELL PUTTING OUT THAT FRESH AIR SMELL. PLEASE CALL ED AT 316-655-8745.

I am selling a Tool Shop belt sander as shown. I used it one time to sand down an old bathtub and that was it. Im also including 2 additional sanding belts (new). $15.00. 316-655-8745 Ed

This was my grandfathers. He made it. Heavy duty 220V motor. Works great for large jobs.

This is a Ridgid Brand Tri-stand. Works great, just have no use for it anymore.Vise holds up to 2 1/2\" pipe.

Shown is a universal cam bearing installing. Used about 10 times on Chevy Big/Small block engines. Sorry this not a barter type garage sale item, One payment cash only please.

snap on kra5213 $1200 obo or trade call paul @ 316-215-1106

I found my stolen car hauler trailer in this mans back yard in Arkansas City. I noticed 2 other trailers and a welder so I took a couple of pictures and Im posting here on Craigs List! So, if you are missing a welder or a car trailer - take a good look here or the mans house location @ 1035 N. D St., Arkansas City. We are just north of Ponca City, OK zip code 67005. Good luck! Happy to help - like I said, my trailer was taken 3 weeks ago and by complete luck I was looking at a house for sale right next door to this place when I saw my trailer in back yard. Mans name is Bill Sheldon. He owns the local pawn shop.

I have half of a 16 ft ladder which is 8 ft that is good for what ever . I used this for cable installs now i dont install cable any more . Best to call 806-6010 , Thanks

Craftsman table saw, 110 volt, mounted on a home made tableHas adjustments for pitch, angle, etc.I believe its a 7 and 1/4 inch bladeIts belt drive and very solidly built.I think its neat and hate to part with it, but we have bills to payWe can be reached at 854-0428 or Rockstargenius@gmail.comWe have other items for sale. Search Craigslist for \"Steve and Angie\" to seeThanks, and God blessSteve and Angie

two stroke 2 horsepower Craftsman brand snowblower, runs well.Adjustable discharge chute with metal auger18\" pathcall 854-0428 or write Rockstargenius@gmail.comWe have many items for sale, search Craigslist for \"Steve and Angie\" to seeThanks, and God blessSteve and Angie