Want to buy a Dremel or Sears brand, corded Dremel. Please No Knock-Offs.Picture is for reference only. Does not need to be that exact model.Please respond with details, price, Etc. Pictures would be helpful!okiegear@yahoo.comThanks Location: Topekaits NOT ok to contact this poster with services or other commercial interests

i have a snap-on tool box krl-1003 for sale in really good condition.why buy a new one from the snap-on dealer for 8000 when you can get this one for 4000. this is a real deal looking for a serious buyer. no b/s Get Your Free Craigslist Hit Counter! Location: wichitaits NOT ok to contact this poster with services or other commercial interests

4x8 plasma table works good. Comes with everything but plasma cutter all you need to do is buy a plasma cutter hook it up and go. Call Jeremiah 785-271-0882 Location: Topekaits NOT ok to contact this poster with services or other commercial interests

A brand new MAC Tools diesel compression test kit. Kit contains: 2-1/2 glycerin filled gauge with glass lens in stainless steel housing, 4,500 PSI rated nylon jacketed pressure hose assembly, Dual scale Standard scale 0-1,000 PSI- Metric scale 0-70 BAR. 13-piece adapter set (Deere & BMW adapters included), and a molded carrying case. Goes with about 25 different cars or small trucks or big rigs. I purhase this tool kit, and i found out that I cant you use it. Its never been in a motor to check compression. I have copy of purhase Im asking $300, obo. Trade on tools, scanner or of some sort. Call 913-544-2324 Leave Message Location: Lenexa, KSits NOT ok to contact this poster with services or other commercial interests

I have 3 very slightly used tools I bought them in january used and never used them since I have bought them. They all have their own table that goes with them. 1 is a Craftsman 9inch band saw with push bar. 1 is a 16 inch sabor sawCentral Mechine. 1 is a Craftsman table routor with atachments and tools. I dont know how much they cost new I just want my money back out of them since I never used them. Call any time 620 344 0384 Location: emporiaits NOT ok to contact this poster with services or other commercial interests

6- DeWalt Cordless 18 Volt Tools All for $300.00 Call Kirk for details....785-220-13852 - 1/2\" Drills1 - 6 1/4\" Saw2 - Impact Drivers (1 is 1/2\" Drive)1 - CutOff Tool 4\"All are 18 volt....Includes 2 Chargers and 4 Batteries.. Location: SW Topekaits NOT ok to contact this poster with services or other commercial interests

For sale a Foley Belsaws automatic saw filer. Came from my uncles estate. Instuction manual included. $75.00 OBO. Location: Tecumsehits NOT ok to contact this poster with services or other commercial interests

Nice 7 1/4 saw 11 Amps , Ive always owned it never abused it comes with on board wrench and blade. 785-845-5926

I have a brand new, only started to make sure it worked, 3500 Watt Champion Generator for sale. I bought it about a month or so ago and found out that it was not big enough to run my Well pump, need 220 volts. So, I have no use for it and will sale it for what it is selling for at Home Depot minus tax and shipping charges. Click on the link below. http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100628628&categoryID=524798It has not even been registered with Champion so it still should have its original warranty. I can deliver and depending on location, may charge actual gas charges.

Nice tool box. 2 pullout drawers Jeremy 785-608-0685. If the picture isnt showing up I can email one

I have a wooden work bench for sale, minus the stuff thats in the picture $20 cash thanks

Nice Snowblower, I had the carb rebuilt last season it starts and runs great.20\" path. 845-5926

used poulan 3314 14\" bar saw runs great chain is pretty sharp.Sometimes pull rope doesnt retract as well as it should. 845-5926

Gas powered concrete saw, Wacker brand. Call 785-220-9327

propane heater with tank. call 785-220-9327

Job box, rigid brand, good condition. Call 785-220-9327

BRAND NEW IN STORAGE BOX Product DescriptionFrom the ManufacturerProudly made in the U.S.A. with a limited warranty. Accurate in the clockwise direction to +/-3% in the upper 80% of the range for outstanding torquing consistency. Micrometer locking ring maintains setting during operation. Ratchet design features an 8 degree ratcheting arc for greater access in tight spots. Pliable, elastomer handle grip provides superior comfort and a high resistance to oil and grease. Product Description- Torque range: 100 to 600 ft.-lbs in 2.5lb increments; (153 to 830 Nm in 3.4 Nm increments)- Reversible for torquing left or right threaded fasteners- Accurate in clockwise direction to +/- 4% in upper 80% of range- Micrometer lock-ring maintains setting during operation- Rubber dust seal keeps dirt out of inner mechanism- 45 tooth ratchet design yeilds 8 degree arc for work in tight spaces- Chrome finish for long lasting corrosion resistance- Length: 41.25\"- Includes storage box Thanks for looking if interested feel free to ask or call 816-427-2125. Thanks Chris

I have for sale a large machinists turn table. The table does turn the full 360 degrees.It measures approximately 18-20 inches in diameter and is in very good and operable condition. The table has incurred some surface rust from sitting but does not have any pits or damage to it. It will be sold as is. We may be contacted at rapidrubble101@yahoo.com or ask for Fred or Jeremiah at 785-862-8875. Thanks!!!

This compressor has very little use and was hard wired 220v in my garage. I sold my house and no longer have a need for a compressor this size. The specs should be self explainatory through the pics. I will throw in the fitting and air line with dryers also. Please feel free to email me with any questions. Thanks for looking

I HAVE A LIKE NEW DELTA 10\" COMPOUND POWER MITER SAW, IT IS IN LIKE NEW CONDITION AND RUNS PERFECT, CALL 785-979-4078

LARGO Industries Cleaning System, Model 21, 132 GPH, 2 HP Baldor motor, 1200 PSI, Maximum temperature 210F, 115 volt/20 amp, fuel oil fired, Wayne oil burner, Admiral pump, 50 hose, 3 nozzles, Cleaner/detergent pick up. $1400 620-475-3402

12\" DeWalt Commercial Radial Arm Saw, 2HP, 22.11 Amps, 115/230 volts, 4 table with 10 steel conveyor/tables on each side of saw (24 total length),12\" carbide tipped blade, 18\" crosscut $500 620-475-3402

DC-1200 JET Dust Collector w/ Bag Kit, 2HP, 1Ph, 110 Volt or 240 Volt, Quick-connect collection bag, 6\" hose connection with 4\" \"Y\" connection, Four casters for maneuverability, Excellent Condition, $300 620-475-3402

Panel Saw - Sheetboard Mfg. Co. Model H4 - Serial # A67Mfg. by: Safety Speed Cut Mfg. Co. 8 1/4 Skil HD Ball Bearing Saw - Call Rick @ 785-633-5249 - Make Offer

for sale is snap on toolbox model number KRL773APCM. Deminsions are 73 inches long and 24 inches deep. Has ball bearing drawers. Purchased new a little over a year ago and still looks and works like new. asking 4500.00 from snap on dealer would run 5000-6000 dollars. can call at 785-230-4086

6\" Sears Jointer/Planer Call Rick @ 785-633-5249

12\" Sears Craftsman Band Saw. Used very little. Call Rick @ 785-633-5249

I rented this tile cutter from Color Tile and they went out of business before I had a chance to returned it, so I lost my deposit and ended up with a tile cutter. Call Rick @ 785-633-5249

Bench Top Craftsman Drill Press Stand - Model 335.22926 - Call Rick 785-633-5249

Works fine. I just got a larger one and dont need it. call matt at 785 392 0327 or respond to ad.

For Sale: Snap-on Tools Counselor II with stand. The machine comes with pick up for a coil wire (no DI adaptor) and Manual, Model# MT3000A, Serial# 40933717. I am asking $1500.00 OBO. I can be reached at 816-918-0517.

I have for sale or trade a bead breaker for 14 and 15 inch tires........Those of you that dismount your own tires know how simple this toolmakes it to break the tire beads off the rims...Lots of racers use these at the track cause its fast and simple....New from the Speedwaycataolg it was $40.00 delivered to me, I would take $30.00, was only used a couple times and worked great. Trying to clean out and simplify my shop.

10\" Wards Power Craft Radial Arm Saw with Stand.

new in the box top of the line reelcraft air hose reel. its justtoo big for my little garage. very heavy duty,comes with 50 feet of premiumrubber hose. this item retails for 350.00.call 785 883 4668 or785 248 1032 anytime.if no answer,leave message,as we both work the overnights

Poulan wild thing chain saw, 18inch 40cc runs great. If you have questions call or ask. Cell 785-554-5243

excellent condition, cleaning out shop. must sell/make offer. 785-640-6235