02-15
Emglo portable job site air compressor (Ft Riley) $245
Emglo portable air compressor for Job Site, Heavy Duty kind type of work, worked perfect for me. 120/240v, K15A-17P, 1.5HP Electric Motor,8 Plus Gallons, bought finish job in my old house, do not have any use for it after job well done. $245 OBO, Serious inquiry only, if interested please call or text me at 202-431-4051
Thanks
Ft Riley
Location: Ft Riley
it's NOT ok to contact this poster with services or other commercial interests
02-15
Cushion Stuffer, Lochner $200
I have a Lochner manual cushion stuffer for sale. Pedal feed for easy cushion stuffing. Excellent condition.
it's NOT ok to contact this poster with services or other commercial interests
02-15
HYDRAULIC TRANSMISSION (LOST SPRINGS) $50
FOR SALE NORCO 1.5 TON HYDRAULIC TRANSMISSION JACK MODEL NO 72000S. NOW WHY IT IS SO CHEAP THE JACK WORKED FINE A COUPLE YEARS AGO WHEN I REPLACED TRANSMISSION ON A SEMI NOW THAT I'VE DECIDED TO SALE ITS NOT WORKING. WHEN TRYING TO JACK IT UP IT TRIES TO LIFT BUT COMES RIGHT BACK DOWN OIL LEVELS GOOD WOULD SAY PACKING OR ORING WENT BAD. IT'S A GREAT TRANSMISSION JACK WITH PLENTY OF ADJUSTERS ETC FOR GETTING TRANSMISSION OUT AND IN. IS JUST GOING TO HAVE TO HAVE THE JACK REBUILT WHICH WOULD BE A GREAT DEAL FOR SOME ONE NEEDING ONE WHEN JACKS LIKE THIS SALE FOR $1500.00 TO $2000.00.
Location: LOST SPRINGS
it's NOT ok to contact this poster with services or other commercial interests
02-14
Black & Decker Workmate (1149 St Marys Rd, Junction City, KS) $60
Can't tell its used. Would make excellent gift.
Location: 1149 St Marys Rd, Junction City, KS
it's NOT ok to contact this poster with services or other commercial interests
02-14
Delta Portable Planer (Manhattan) $300
New, in the box, 12 1/2 inch portable planer
Location: Manhattan
it's NOT ok to contact this poster with services or other commercial interests
02-14
Brand New Johnsered Trim Saw (Lawrence) $480
I have a brand new johnsered trim saw. I purchased it to do some weekend tree work but changed my mind. It is gas powered and is a great saw. Any questions feel free to ask. Thanks.
Location: Lawrence
it's NOT ok to contact this poster with services or other commercial interests
02-14
Air compressor, pancake (Wamego) $20
Used Harbor Freight pancake air compressor.
Tanks is good. It has a air outlet welded into the side. Greatly increases the air output.
Motor and compressor work. The regulator is not working right. It wouldn't shut off when tank was full. I took it apart and lost a small spring.
Has been collecting dust for a few years. Tired of looking at it.
$20 obo
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-13
shopsmith (wamego) $250
shopsmith with tablesaw attachment and face plate, misc stuff and manuel. $250.00
Location: wamego
it's NOT ok to contact this poster with services or other commercial interests
02-13
Campbell Hausfeld 4 ga air compressor (Ft Riley) $165
Campbell Hausfeld 4 gallon air compressor, 3 HP engine, Model WL506203AJ . Not used that much. $165. Please see attached photos, If interested please call or text me @ 202-431-4051 Serious inquiries only
Thank you
Very Respectful
H
Ft Riley
Location: Ft Riley
it's NOT ok to contact this poster with services or other commercial interests
02-13
Snap-on 1/2 drive Torque wrench 40-250 ft lbs(OBO) (Ft. Riley) $250
If you are intreasted contact cris at (530) 917-8338
Item Appearance Minor cosmetic flaws. May Have Insignificant Scuffs, Scratches, Associated With Regular Use.
Functionality Completely Functional
Drive Size? 1/2
Location: Ft. Riley
it's NOT ok to contact this poster with services or other commercial interests
02-13
Bottles and Pacie's set (new) (Ft. Riley) $5
Picture tells all, contact cris if you have any questions (530) 917-8338
Location: Ft. Riley
it's NOT ok to contact this poster with services or other commercial interests
02-13
crib bumper and car seat insert (Ft. Riley) $20
This is a package deal, what you see is what you get. Any questions contact cris (530) 917-8338
Location: Ft. Riley
it's NOT ok to contact this poster with services or other commercial interests
02-13
Snap-on 21v Impact Wrench (Ft. Riley) $150
picture tells all, if you have any questions call or text cris at (530) 917-8338
$150.00 OBO
Location: Ft. Riley
it's NOT ok to contact this poster with services or other commercial interests
02-13
Snap-on 18v Battery Powered 1/2" impact wrench (Ft. Riley) $200
Picture tells exactley what you get, you will have to buy your own charger. call or text if you have any questions. (530) 917-8338.
$200.00 OBO
Location: Ft. Riley
it's NOT ok to contact this poster with services or other commercial interests
02-13
Snap-on Motorcycle compression guage set (Ft.Riley) $100
The picutres tell all, its in great condition. Any questions call or text cris at (530) 917-8338
Location: Ft.Riley
it's NOT ok to contact this poster with services or other commercial interests
02-12
Black & Decker 12V Cordless Lithium Drill Driver BRAND NEW (Junction City) $40
I have a Black & Decker 12v lithium drill driver for sale. The model number is LDX112C. It is brand new in the box. I received it as a gift and don't have a use for it. Retail price is $70, and I'm selling for $40.
More information about the drill including pictures can be found here: http://www.blackanddecker.com/power-tools/LDX112C.aspx
Location: Junction City
it's NOT ok to contact this poster with services or other commercial interests
02-12
10" craftsman mite saw! (manhattan) $200
10" craftsman miter saw! Call, email or text 7853070676
Location: manhattan
it's NOT ok to contact this poster with services or other commercial interests
02-12
craftsman toolbox (Manhattan, ks) $500
I am selling my toolbox, just the lower half. Got a new job where i do not need it any more, if interested or want to come look at it call me at 620 255 4734
Location: Manhattan, ks
it's NOT ok to contact this poster with services or other commercial interests
02-12
AC Vacuum Pump (Manhattan, KS) $40
AC A/C HVAC Vacuum Pump. Only $40.
This setup is shop built using a Dayton 115V vacuum pump.
Can be used for R12 or R134A or R22 air conditioning systems or for many other uses.
Guaranteed to work properly. Will draw sufficient vacuum to remove air and moisture so you can properly recharge a car or truck A/C system.
Pick up in northwest Manhattan, KS.
Call Bob at (785) 539-5209 or email rbuel at juno dot com.
No calls after 8:00 p.m, please.
Location: Manhattan, KS
it's NOT ok to contact this poster with services or other commercial interests
02-12
Dial Torque Wrench-Consolidated Devices (Manhattan,KS) $23
Used 150- inch pound 3/8" drive dial torque wrench w/ case. 1502DI model It does work Compare with Ebay.
Location: Manhattan,KS
it's NOT ok to contact this poster with services or other commercial interests
02-11
Kremlin airless, MVX, New (Clifton, KS) $2100
Air assisted airless unit. Family health issues prevent expanding business. Hung on wall but never hooked up.
Location: Clifton, KS
it's NOT ok to contact this poster with services or other commercial interests
02-11
Construction Heaters Propane (JC) $75
LP heaters, 75 dollars each non forced air convection heaters, used with 100 pound bottles or larger, if interested call 785, 762;,7978
Location: JC
it's NOT ok to contact this poster with services or other commercial interests
02-11
Sport Bike Stands (Clay Center) $100
Front and rear stands for sport bikes with conventional swing arm and holes in the bottom of the front fork for the pins on the stand. Bought these unpainted and cleaned, primed and painted with rattle cans. Royal blue. call 447-0315
Location: Clay Center
it's NOT ok to contact this poster with services or other commercial interests
02-10
car lift (Herington Ks) $2000
For sale! I have a 12,000 lb 4 post car lift. The posts are 5'5" tall. The ramps are 16' long. The lift
is a New Grand. It is approximately 12-15 years old. It was purchased at a tax auction and
never had a chance to install it. I can send pictures to an e-mail address.
If interested call (785) 258-four0nine2
Location: Herington Ks
it's NOT ok to contact this poster with services or other commercial interests
02-10
Loctite H3151 50ml Tubes Case (JC) $75
Up for sale are two case total of Loctite® H3151 Speedbonder Structural Adhesive, Metal Bonder is a medium viscosity, medium fixture time metal bonder. Excellent bond strength on aluminum and steel. Impact and peel resistant. Pale yellow. Buy one case of 10 for $75 or both for $100. Buyer agrees to pick up locally or arange for shipment/ meet with seller for a small fee depending on distance to offset for time/fuel costs. Please e-mail or call 515-290-0292.
Location: JC
it's NOT ok to contact this poster with services or other commercial interests
02-10
Thread Die Repair Set (JC) $180
NIB, only opened to take this picture.
-THIS KIT IS NEW SURPLUS!
-FOUR STAR MODEL S1991M METRIC THREAD DIE REPAIR KIT
-18 PC METRIC DIE SET INCLUDES THE FOLLOWING:
CONTAINS:
24MM 3.00 20MM 2.50 16MM 2.00 14MM 1.50 14MM 1.25
12MM 1.75 12MM 1.50 12MM 1.25 11MM 1.50 10MM 1.50
10MM 1.25 10MM 1.00 9MM 1.25 9MM 1.00 8MM 1.25
8MM 1.00 6MM 1.00 5MM .80
-ALSO INCLUDES 12 EXTRA SPRINGS!
-COMES IN VERY NICE CARRYNG CASE!
Buyer agrees to pick up locally or arrange with seller to deliver for small fee to offset fuel/time. Please e-mail or call 515-290-0292.
Location: JC
it's NOT ok to contact this poster with services or other commercial interests
02-10
MOTORVAC TRANSMISSION FLUSH MACHINE (MANHATTAN) $2500
We have a MotorVac transtech III transmission service system that we use a couple times but then stoped. it has all the hookups for foreign and domistic transmission lines. we paid well of $3,000 for this machine and all the hookups. asking $2500 o.b.o.. this is located at Oppys Oil Company at 605s 3rd street in manhattan. call 785-776-9940
Location: MANHATTAN
it's NOT ok to contact this poster with services or other commercial interests
02-10
Side Tack Saw Table DeWalt saw (Fenton) $699
It's a known fact you get more done with a Side Track.
No more wasting time setting up and no need for tangled up cords!
The Side Track is cordless and it's easy to use and sets up anywhere.
To make it even better you get a DeWalt cordless saw with each purchase.
$699 takes all so for more info just Google "side track saw table"
Location: Fenton
it's NOT ok to contact this poster with services or other commercial interests
02-10
Selling my Mac Toolbox (Clay Center) $5500
This box is about 4 years old. Still in great shape. It is a Black Metal Flake. It is one of the biggest boxes that Mac Tools makes. I haven't seen any of the new stuff from Mac. I paid over 12000 for it brand new in 2007. I am looking to get 5500 or best offer. I will list the info about the box below.
MB1900
Perfect combination for maximum storage. Large deep drawers for big tools and cases. Deep (6") 59" wide drawer for socket and wrench storage. 20 heavy-duty drawers with 200-lbs. per drawer capacity and 400-lbs. capacity in the extra wide top drawer. "Uni-Key" Lock System (patent pending) provides easy one turn operation. Easy-to-change lock cylinders so boxes can be keyed alike. "Rigid-Rail" heavy-duty construction (patent pending) provides maximum support. 12,000-lbs. capacity with 6 casters. Heavy-duty, spring loaded 6" casters with 2,000-lbs. capacity per wheel and posilock brake. Precision ball bearings reduce force required to move box. Rollx⢠wheels will not flat spot or chip. S
02-10
chain saw sharpener (wamego) $45
I have a very lightly used electric chain saw sharpener with extra grinding wheels. Works good, I just don't have enough patience to use it. Please call me at 785-410-0948 if interested. Please no e-mails or texts. Thanks, Wayne
Location: wamego
it's NOT ok to contact this poster with services or other commercial interests
02-10
shop cart (wamego) $20
I have an used 2 shelf service cart. I had my welder on it, but now have an official welding cart. Please call me at 785-410-0948 if interested. Please no e-mails or texts. Thanks, Wayne
Location: wamego
it's NOT ok to contact this poster with services or other commercial interests
02-10
Craftsman Grease Gun (Wamego) $20
Craftsman pnuematic grease gun. Works great, just don't use it anymore. Please call me at 785-410-0948 if interested. Please no e-mails or texts. Thanks, Wayne
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-10
18V dewalt sawzall & light (Wamego) $25
I have an used 18 volt dewalt sawzall and light. Bare tool only. $25 per tool or $45 for the pair. Please call me at 785-410-0948 if interested. Please no e-mails or texts. Thanks, Wayne
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-10
Diesel Heater (Wamego) $50
I have an used DynaGlo diesel / kerosene heater for sale. It is about 5 years old. I used it last winter, but have not used it this winter. Please call me at 785-410-0948 if interested. Please no e-mails or text messaging. Thanks, Wayne
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Coffing Chain Hoist (Manhattan) $250
This is an industrial grade chain ratchet hoist. The Coffing brand is well recognized, and has a LIFETIME warranty. I had great ambitions of using it to pull engines, but time money and space are three things I never seem to have all at the same time. If you would like to check out the product specs this website is a synopsis. http://www.perfectioncrane.com/products/hoists/ratchetlever/coffing/ma-malseries/MA-30.htm The new hoist lists at $667.00. I am asking way below that considering this has had no use on it and it has a manufacturer lifetime warranty. Email is the best means of contact. I will reply and set up a time for you to look at it. NO SCAMS or low ball offers. If you have something reasonable feel free to offer.
Location: Manhattan
it's NOT ok to contact this poster with services or other commercial interests
02-09
Reese Receiver Hitch and ball (Wamego) $10
I have a Reese ball mount with a 2 5/16" ball with it. This set up has been used once to pull a trailer and has not been used since. If you want it, let me know.
Thanks.
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Walter Zip wheels (25) (Wamego) $50
I have a new unopened tub of Walter Zip wheels. There are 25 cutoff wheels in this tub. The part number is 11-T-042. They are for a 4" grinder. If you want them, let me know.
Thanks.
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Tiger flap discs and wire wheels (Wamego) $150
I have about 55 Tiger flap discs and 8 twisted wire wheels. They are made by Weiler. The flap discs are 60 Grit and 4.5" diameter. The part number for them are 50564. The wire wheels are 4 x .020 x 5/8 Weiler mini roughneck. They screw onto a 4" grinder with a 5/8 arbor. The flap discs are also for a 4" grinder. They are all in boxes, all brand new. The flap discs sell for about $5.00 each, and the wire wheels sell for about $80.00 for a box of five. If you do metal work, this is a hell of a deal. If you want them, let me know.
Thanks.
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Tapco 3' Floor Leveling Jack (Wamego) $10
I have a new in the box Tapco 1'-7" to 3' Floor jack used to level the floors in your house, or whatever you want to use it for. If you want it let me know.
Thanks.
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Dewalt Drill Index, Forstner bits (Wamego) $25
I have a set of Dewalt drill bits for sale. They go all the way up to 1/2 inch. they are brad point bits. the 1/8 is missing and a few have been used, most however have not. I also have 3 Irwin Speedbor Forstner bits. Two of them are 2 1/8" and one is 2" The 2" is unopened, one the bigger ones is without a package and used a few times and the other bigger one has its package and has been used a couple of times as well. But both still cut aggressively. I would like to see it all go together. The brand new Forstner bit is around $20 alone. If you want them, let me know.
Thanks.
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Lincoln Welding Hood (Wamego) $10
I have a Lincoln Electric welding hood for sale. It is a solid lens. Not auto darkening. It hasn't been used, it has just been shuffled around my garage. I like Jackson hoods personally. If you want it, let me know.
Thanks.
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Porter Cable brad nailer (Wamego) $20
I have a Porter Cable 18 ga. brad nailer for sale. It comes with the pancake compressors they sell at the home depot. I have used it a few times. It works perfectly. If you want it, let me know.
Thanks.
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Ridgid pneumatic Stapler (Wamego) $45
I have a Ridgid air stapler for sale. I've had it about a year. It is used, but definitely not daily. It is dusty in the pictures, but is cleaned up now. there are a few minor scuffs on it, other than that, it looks and functions like new. If you want it, let me know.
Thanks.
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Husky Pro hvlp gun (wamego) $50
I have a Husky Pro hvlp gun. I bought it new from the Home Depot in Manhattan less than a year ago. I have used it once. It was cleaned thoroughly, and hasn't been touched since. Perfect condition. If you want it, let me know.
Thanks.
Location: wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Hilti MD2500 Epoxy Gun (Wamego) $25
I have a Hilti MD 2500 Epoxy Gun. It has only run one pack of epoxy through it. If you want it, let me know.
Thanks.
Location: Wamego
it's NOT ok to contact this poster with services or other commercial interests
02-09
Working Sears Snow Blower (Manhattan, KS) $30
Working Sears Snow Blower
Location: Manhattan, KS
it's NOT ok to contact this poster with services or other commercial interests
02-09
Dewalt Right Angle Super Hole Hawg (Manhattan) $150
Selling off some of my tools, I have a Dewalt Right Angle Super Hole Hawg. all parts are there handle and key aren't visible in pic. Works great just need to downsize please text or call 785-320 three eight eight zero
Location: Manhattan
it's NOT ok to contact this poster with services or other commercial interests
02-09
Commercial Hepa Vacuum (Manhattan) $250
I have a commercial Hepa Vacuum Made by dustless technologies. It's only been used a hand full of times. Model Number is 16006. Text or call 785-three two zero three eight eight zero.
Location: Manhattan
it's NOT ok to contact this poster with services or other commercial interests
02-09
Pacer Transfer Pump Brand New In Box. (Manhattan) $250
Selling some of my tools I Have a brand new in the box Pacer Transfer/Trash Pump model number seb2ple3c. Comes with 2" hose.
Location: Manhattan
it's NOT ok to contact this poster with services or other commercial interests
02-09
Milwaukee Porta Band Saw (Manhattan) $100
Selling some of my tools. I have a Milwaukee Porta Band saw that works great just needing to downsize. Please call or text 785-three two zero-three eight eight zero.
Location: Manhattan
it's NOT ok to contact this poster with services or other commercial interests