rubbermaid 35qt mop bucket w/ ringer and a mop $35chad 913-209-9363 Location: opits NOT ok to contact this poster with services or other commercial interests

Lawn BoyAluminum Deck2 cycleSelf Propelled , 3 SpeedGold Series 4.5 HPThis mower is hard to start, It will start and run for a while and then dies, might just need a real good tune up, I did mow a little with it to try it out, self propelled works,Cosmetically in pretty decent condition for age.$75 or trade Location: Joplin Moits NOT ok to contact this poster with services or other commercial interests

This is a reed tripod with No 1S printed on it with closing chain for bottom of legs. Location: opits NOT ok to contact this poster with services or other commercial interests

Not sure what they are for exactly....but can be used for counter ends or what ever.913-522-5419 Location: opits NOT ok to contact this poster with services or other commercial interests

brand new toolbox with side box Location: op. ksits NOT ok to contact this poster with services or other commercial interests

CLEVIS 51 mm; WLL; 2 1/4\" pin; 43 TonMade in the USAContact Chris @ 785 230 1783 Location: Topekaits NOT ok to contact this poster with services or other commercial interests

The Diamond Vise by The Adams Co.Patent Date January 15, 1895Call Chris @ 785 230 1783 Location: Topekaits NOT ok to contact this poster with services or other commercial interests

CRAFTSMAN ROUTER & BITS - $50Used very little. Excellent shape. Complete w/ hard plastic storage case.CRAFTSMAN SCROLLSAW - $50Used, but in great shape. Call Chris @ 785 230 1783 Location: Topekaits NOT ok to contact this poster with services or other commercial interests

This is a reed tripod with No 1S printed on it with closing chain for bottom of legs. Location: opits NOT ok to contact this poster with services or other commercial interests

2003 Bobcat 753 with 140 hours It has been stored inside and it looks like new.I am asking $18,000 with attachments. Please email for more information. Location: Lathropits NOT ok to contact this poster with services or other commercial interests

Black and decker screw driver Model number mt1203 with 2 batteries and charger. 3 in 1 can be used as jigsaw Sander Drill Location: OP KS 66213its NOT ok to contact this poster with services or other commercial interests

This is not the regular \"do it your self\" model. It is the heavy duty commercial unit. New, never been used.. I am too old for this kind of toy. need $350 cash Location: kc/opits NOT ok to contact this poster with services or other commercial interests

9 inch Craftsman Table Saw- Cast iron table- Belt driven - on home made roll around stand- Motor switch needs cleaning- $100.00 CASH ONLY - 816-586-2012 after 5:00 P.M. Location: Lathrop Mo.its NOT ok to contact this poster with services or other commercial interests

Two ladders; one is a 6 and the other is an 8. (I think, Ill verify shortly).They are in good condition. Only used to do small chores around the house.Not sure how to price them, so feel free to make an offer.Thanks! Location: OP, KSits NOT ok to contact this poster with services or other commercial interests

Summer is here and the Heat is on and these fans will help you beat the heat,1 has a 2 speed 1/2 hp Dayton motor with an approximate 30in. fan,the other has a 2speed 1/2 hp Emerson Motor with an approximate 36in. fan.These sell for well over double this price in the Grainger Catalog These are available at Empire Estate Neighborhood garage sale 9632 El Monte,OP,Ks. Fri-Sat 9am-4pm.Ill try and post Pics TonightAny questions call 913 5158250 Location: OP,Ksits NOT ok to contact this poster with services or other commercial interests

SPX OTC GENISYS AUTO SCANNER KIT, updated to 2005 with all software, cables and acc. incl. abs software like new paid 2785.00. obo. Any questions please call Mike @ 916-289-3061 or Paul @ 417-623-3465 Location: joplin moits NOT ok to contact this poster with services or other commercial interests

PUMA Air Compressor. 4HP 150PSI Model DP-4011VP EXCELLENT CONDITION. Added note: This unit has 11 gallon tank and stands about 3.5 foot tall. Location: OPKSits NOT ok to contact this poster with services or other commercial interests

This is a reed tripod with No 1S printed on it with closing chain for bottom of legs. Location: opits NOT ok to contact this poster with services or other commercial interests

MILLER 400D WELDER GENERATOR WITH MILLER TRAILER AND TOOL BOX WITH LEADS. THE 400D IS RUN BY A DEUTZ 3 CYLINDER AIR COOLED DIESEL ENGINE. IT IS RATED AT 400AMP WELDING OUTPUT, 5500 WATT PEAK AND 4000 WATT CONTINUOUS GENERATING AC POWER.. MOTOR STARTS EASY. I DO NOT KNOW HOW MANY HOURS IT HAS ON IT BECAUSE THE HOUR METER HAS BEEN REPLACED. FOR MORE INFORMATION CALL 785-232-7296 Location: TOPEKAits NOT ok to contact this poster with services or other commercial interests

Black and decker screw driver Model number mt1203 with 2 batteries and charger.3 in 1 can be used asjigsaw SanderDrill Location: OP KS 66213its NOT ok to contact this poster with services or other commercial interests

I have my house for sale and need to make some room. Strange time to sell a snow blower but Ive priced it cheap to make it sell. This unit is a 2 stroke with rubber paddles and easy adjustments. It is easy to start and saves a lot of back ache.I hope to sell it here but our neighborhood is having a garage sale at the end of June.Call Kyle at 913-708-1915 Location: 10483 W 157th Ter OP, KS 66221its NOT ok to contact this poster with services or other commercial interests

This is a reed tripod with No 1S printed on it with closing chain for bottom of legs. Location: opits NOT ok to contact this poster with services or other commercial interests

This is a reed tripod with No 1S printed on it with closing chain for bottom of legs. Location: opits NOT ok to contact this poster with services or other commercial interests

This is a factory reconditioned reidgid 13\" planer. Bought it hoping to resell it for some money...then found out it was a recon. Now after learning my lesson..hahaha I am willing to sell it for lesps than what I paid. I do know tools and prices very well. It was purchased at a store closing sale (there are still several that are open around the metro that will honor the arranty) for $255.99 accompinied with a 20% discount.I am going to ask for $180. That is very firm as the recons at home depot are selling for 269.00 Even the Ryobi planer sells for $200.00. You are more than welcome to bring some wood by to plane down. I SEVERLY ask that it be somewhat flat. So if you have a joiner please run it through there a couple of times. You can contact me through my cell at 913-944-9853. I respind better to text messages, but if you are a voicemail leaver that is fine also. i am very prompt in getting back to people. Location: 435 & Roe OPits NOT ok to contact this poster with services or other commercial interests

Flagler 3422 pittsburg machine with drive cleat in great shape asking 4500.00 they are going on the net for 6900.00 to 7500.00 this is a great deal might consider trade for CLEAN honda Low mileage or clean small truck Location: opits NOT ok to contact this poster with services or other commercial interests

Several Antique Ford Wrenches. Used on Model A Ford. Location: OPKSits NOT ok to contact this poster with services or other commercial interests

PUMA Air Compressor. 4HP 150PSI Model DP-4011VP EXCELLENT CONDITION Location: OPKSits NOT ok to contact this poster with services or other commercial interests

One (1) Oxweld argon/water control valve, Type V-30. One (1) RegO argon/water control valve. One (1) Oberdorfer # 5765 motor-driven water pump for tig welding. $25.00 for all three. 785-554-5502. Location: Topeka,KSits NOT ok to contact this poster with services or other commercial interests

Air Products tig torch, Vis-Air II, light weight, I believe it is 100 amp, 10 ft. long. $25.00. 785-554-5502 Location: Topeka,KSits NOT ok to contact this poster with services or other commercial interests

I have two (2) Weldcraft WP-26V tig torches. These are air cooled, 300 amp, one is 25 ft. long, the other is 10 ft. long. $25.00 each, buy one or both. 785-554-5502. Location: Topeka, KSits NOT ok to contact this poster with services or other commercial interests

Master Mechanic 3 drawer rolling tool chest. It is missing the fold down lid for below the drawers. $150 OBO cash only. No tools sold with it. Location: 75th and Lamar OPits NOT ok to contact this poster with services or other commercial interests