Great price for truck bed tool box. e-mail with any questions Location: Northland area,KCMOits NOT ok to contact this poster with services or other commercial interests

Craftsman table saw, Contractors style with stand, works like new Location: Northland area, KCMOits NOT ok to contact this poster with services or other commercial interests

This is a Pace American 24 foot enclosed trailer. The features include: 2 5/16 ball hitch, 7000 pound tandem axle, a drive up reinforced door in the back (4500 lb capacity), a side entry door, e-track down the full length of each side, 4 infloor tie downs, 6 way canon style electrical connector, working lights (inside & out), a winch with controller, and a DOT approved break away control kit. Asking $6000/OBO Location: KCMOits NOT ok to contact this poster with services or other commercial interests

Heres a pic. It IS BARELY used. Looks and runs Like NEWNOT of my exact one but it IS this cleansaw w/ case$80 CASH816-456-9128 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

Heavy-Duty Deep Cut Variable Speed Band Saw Kit - D28770Kw/lightits been stightly used, Very strong unit. They sell for over $300. $150 CASH816-456-9128 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

******* NEED TOOLS ******* THIS IS THE PLACE TO BE ************ Call george 816 359-1050Best price in town 40 hwy by the i 70 drive in Location: kcmoits NOT ok to contact this poster with services or other commercial interests

Pipe vise stand. $1251/2\" bender $103/4\" rigid bender $10Consider offers or trades - Bicycles, Motorcycles, Other tools, what do you have?Thanks,Jules Location: midtown kcmoits NOT ok to contact this poster with services or other commercial interests

I picked these tools up at auction, at a locomotive refurbishing plant some years back. A couple different brands. Well used, but work. I sold them individually on ebay a few years ago. They sold anywhere from $27 to $62. Just wanting them all to go away, but will sell them for $30 apiece if interested. Or Ill entertain trades..........smaller tools, bicycles, motorcycle or let me know what you have.Thanks.... Location: midtown kcmoits NOT ok to contact this poster with services or other commercial interests

Brand new these are realy neet wrenchesCall Chris 816 808 2134 Location: kcmo n.its NOT ok to contact this poster with services or other commercial interests

I HAVE A NEW WEATHER GUARD BOLT IN TOOL BOX PACK RAT 4X34\" X 12\" HIGH WEIGHT 350 BLS CALL FOR MORE INFORMATION @ (816)456-1540 OR @ joebcars1966@yahoo.com THANKS FOR LOOKING AT MY ADD Location: NORTH OF KCMOits NOT ok to contact this poster with services or other commercial interests

@@@@ We got just what you need at the best price in town@@@@@ Just call or text George at 816 359-1050or better yet just come on out to the market 8834 e us 40 any day of the week or on the weekend Open 7 days a week from9am to 9 pm @@@@@@@@@ Thanks for looking Location: kcmoits NOT ok to contact this poster with services or other commercial interests

South Bend Metal Lathe 9\" with accessories. $ 950.00- OBO Location: KCMOits NOT ok to contact this poster with services or other commercial interests

In good condition. It has sturdy feet. There is some green paint on it and it needs a new rope to pull it into fully extended length. Please email your phone number to me and I will call you as soon as I can. Location: Hyde Park, KCMOits NOT ok to contact this poster with services or other commercial interests

Used Black and Decker Circular saw• 11 Amp motor• 5000 RPM• Bevel Adjustment allows for 0-45 degree cutsWill include a couple of blades, (Trim and Framing)$20.00 oboThanks for looking John 816 807 8805 Location: KCMO-Midtownits NOT ok to contact this poster with services or other commercial interests

Heres a pic. It IS BARELY used. Looks and runs Like NEWNOT of my exact one but yes the blade is on the left side when standind over it. And YOU know how important that issaw w/ case816-456-9128 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

Heavy-Duty Deep Cut Variable Speed Band Saw Kit - D28770Kits been stightly used, Very strong unit. They sell for over $300. 816-456-9128 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

We are selling a USED TELESCOPIC TRANSMISSION JACK 600 KG CAPACITY. It is not on wheels and the lift pedal is slightly bent. Comes as you see it in the pics.Available for pickup during normal business hours. We are located north of the river and just east of Ameristar and Granger. Please reply to the above email address or cal Aaron @ 816-483-2103 with questions or to schedule a pickup. Bargain Hunters Dream 3605 NE Kimball Drive KCMO 64164 816-483-2103 www.bargainhuntersdream.biz Location: KCMO B-1-Dits NOT ok to contact this poster with services or other commercial interests

1 1/2 ton floor jack. 816-361-6670 Location: midtown kcmoits NOT ok to contact this poster with services or other commercial interests

Coffing chain comealongs. I have one 3/4 ton for $100 and a 3 ton for $150.Both are in good condition.If interested call Willy at 816 255 9994 Location: downtown kcmoits NOT ok to contact this poster with services or other commercial interests

wagner airless 3/4hp paint sprayerNew but missing front diaphram assembly.if interested, please call Willy at 816 255 9994 Location: downtown kcmoits NOT ok to contact this poster with services or other commercial interests

20,000lb pulling power Tulsa wrecking Winch.If interested Call Willy @ 816 255 9994I only accept cash or paypal Location: downtown kcmoits NOT ok to contact this poster with services or other commercial interests

Hobart Mig Welder. Runs on 110 volt AC current.Welds materials up to 1/8th inch.Comes with one large spool of flux core wire.Inert Gas welding capableAlmost new, approximately 10 hours of use.if interested call Willy at 816 255 9994. Location: downtown kcmoits NOT ok to contact this poster with services or other commercial interests

Wisconsin 12hp motor. Gear drive reducer. Gas powered.runs Fantastic!If interested call Willy at 816 255 9994I only accept cash or paypal. Thanks! Location: downtown kcmoits NOT ok to contact this poster with services or other commercial interests

2 Craftsman 20\" chain saw EZ-Adjust chain bar. .325 pitch. $15.00 each. Buy one or buy both. Location: KCMOits NOT ok to contact this poster with services or other commercial interests

3 Milwaukee chain bars. $15.00 each buy or buy all. Location: KCMOits NOT ok to contact this poster with services or other commercial interests

We are selling a NEW W/ COSM Northern Industrial Hydraulic Pipe Bender - 16-Ton # 144206. It has some scratching from shipping. Comes with 1/2\" bending die only, as pictured.Available for pickup during normal business hours. We are located north of the river, just east of Ameristar and Granger. Please reply to the above email address or call Aaron @ 816-483-2103 with questions or to schedule a pickup. Location: ALDESK KCMOits NOT ok to contact this poster with services or other commercial interests

stanley with some tools 25 obo 816 349 1637 Location: kcmo its NOT ok to contact this poster with services or other commercial interests

works good 25 obo 816 349 1637 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

Used Black and Decker Circular saw• 11 Amp motor• 5000 RPM• Bevel Adjustment allows for 0-45 degree cutsWill include a couple of blades, (Trim and Framing)$25.00 oboThanks for looking John 816 807 8805 Location: Midtown - KCMOits NOT ok to contact this poster with services or other commercial interests

japan tool good starter tool box 816 349 1637 100 obo Location: kcmoits NOT ok to contact this poster with services or other commercial interests

Used Miter Saw StandLarge table and rugged construction support almost any miter saw or other shop tool - 550 lb. capacity• Extend the capacity of your benchtop saw, shaper or sander • Extension wings with rollers help stabilize large pieces • Folds away for easy storage • Enamel finish • 7-3/4\" Diameter Wheels13 ft. 10\"; Table top: 28\" x 19-1/2\"; Wings extend to 57\"; Overall: 22\" x 52\" x 37-3/4\"No longer need a mobile saw stand$50 oboCall John with questions, thanks for looking816 807 8805 Location: Midtown-KCMOits NOT ok to contact this poster with services or other commercial interests

2 Ratcheting chain load binders. 3/8\" - 1/2\" Hooks. Working load limit of 9200 lbs / MBS 33000 lbs. $50.00 each. Location: KCMOits NOT ok to contact this poster with services or other commercial interests

21 Century Manufacturing, 3.0mm or 0.1181 decimal equiv. I have 6 total for sale buy one or buy all. Location: KCMOits NOT ok to contact this poster with services or other commercial interests

Jobox brand hardly used except as a table as you can see from the photo. Have no room to keep. 4 wide, 2 6\" deep, 2 10\" tall. Best offer. Location: kcmoits NOT ok to contact this poster with services or other commercial interests

Complete cutting torch, bottles, gauges, head, rubber, cart. Oxygen almost full, acetylene over half full. Best offer. Location: kcmoits NOT ok to contact this poster with services or other commercial interests

ESAB 250 amp 220 welder. Bought new about 2-3 years ago. Put one role of wire through it. Moved and it sits in garage with no power. Does not have bottle. Leave phone number and any questions and I will call back. Best offer. Location: kcmoits NOT ok to contact this poster with services or other commercial interests

7.2 volt DeWalt Heavy-Duty Angle Screwdriver Kit in Great Condition!Model DW920Awesome quality cordless screwdriver from DeWalt!Features of this tool include:Two driving positions-Inline or Pistol gripVariable speed trigger 0-500 rpmFan-cooled motorUp to 80 in lbs of torqueQuick release metal chuckKit comes with:One 7.2v Battery Pack DW9057Battery charger DW9118Hard plastic carry case and owners manualThis screwdriver is in great cosmetic and operating condition, It has been gently used and adult owned by me for some minor household projects.$50 cash, phone calls only. Thanks Mike 816.699.2222 Location: Downtown KCMOits NOT ok to contact this poster with services or other commercial interests

This is a Ferrari hinge machine and it is pneumatic LIKE NEW call Rusty 816-561-1776 Location: KCMOits NOT ok to contact this poster with services or other commercial interests

this is a Strippit punch & die grinder in good condition, used very little scuffs and scratches are from storage call Rusty 816-561-1776 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

This is a 20\" powermatic planer with a 5 H.P. 1 phase motor Call Rusty 816-561-1776 Location: KCMOits NOT ok to contact this poster with services or other commercial interests

This is a like new 10\" cabinet saw with fence 2 H.P. 1 phase call Rusty 816-561-1776 Location: KCMOits NOT ok to contact this poster with services or other commercial interests

This is a like new Jet dust collector with a dust dog filter. 1100 CFM 1-1/2 h.p. Call Rusty 816-561-1776 Location: KCMOits NOT ok to contact this poster with services or other commercial interests

BRAND NEW 14\" band saw with 5 year warranty. Model 50100 816-561-1776 Rusty Location: KCMOits NOT ok to contact this poster with services or other commercial interests

This is a 10\" 5h.p. delta table saw with 52\" unifence 3 PHASE call Rusty 816-561-1776 Location: KCMOits NOT ok to contact this poster with services or other commercial interests

this is a 18\" up cut saw 7 h.p. excellent cond. call Rusty 816-561-1776 Location: KCMOits NOT ok to contact this poster with services or other commercial interests

small 50 amp home welder. 816-361-6670 Location: midtown kcmoits NOT ok to contact this poster with services or other commercial interests

please call 816-714-6288