Older Stihl 08S Model. I bought this chain saw a few weeks ago but it is bigger than what I need. I replaced the reverse spring, starting ring, spark plug, etc. Runs great! Serious saw for someone that needs to take down big trees! Please call Ben at 816-935-3932 Location: South KCits NOT ok to contact this poster with services or other commercial interests

Craftsman 12 amp electric Edger 50.00Craftsman 16 in. Electric Chain Saw 65.00Craftsman battery powered weedeater 45.00 Craftsman gas weedeater 75.00Craftsman sprinkler 15.00Weedeater brand gas weedeater 60.00Battery Charger 25.00Sprinkler Pump and Hose 25.00Dead on Tool belt w/hammer brand new 15.00All items lightly used or brand new!! Lets make a deal!! 913-636-2907 Location: KC KSits NOT ok to contact this poster with services or other commercial interests

Snap-on Socket Wrench set Brand new never used.. Just out of packaging. It is a metric wrench set sizes 8mm-19mm email with any questions. Thanks,Andrew Location: NKC/Libertyits NOT ok to contact this poster with services or other commercial interests

Great work light. Great for painting or working on cars. I have not used it much. Bulbs are good. I will remove this when it sells. Search my other items by searching 33326369 Location: NKCits NOT ok to contact this poster with services or other commercial interests

I have two wooden step ladders for sale. they are 6 foot step ladders. I will remove this when they sell. You can search my other postings by searching 33326369. The picture is just an example... you know what a ladder looks like. Location: NKCits NOT ok to contact this poster with services or other commercial interests

I am selling new circular skil saw (used once in box), and a brand new single speed jibsaw (in box). I will take this down when they sell. To see my other items search 33326369. Price is for both. Location: NKCits NOT ok to contact this poster with services or other commercial interests

Job box sells for $1000.00 new. asking $500.00 Location: KC Metroits NOT ok to contact this poster with services or other commercial interests

i have a welder i ran 1 roll of wire through call 913-207-9502 Location: kck its NOT ok to contact this poster with services or other commercial interests

i have a 60 galon ac compressor i do not use anymore call 913-207-3092 used like 30 times and all the hoses and tools 500 for it all Location: kck its NOT ok to contact this poster with services or other commercial interests

i have this box i no longer use new it was 600 call 913-207-3092 i just use it to set things on Location: kckits NOT ok to contact this poster with services or other commercial interests

Very Sturdy Step Ladder with a PLATFORM!! at the top.Green Bull is a Werner brand.Labelled Extra Heavy DutyThe highest standing level is 11-5\".Model No. : 207212Size: 12 Platform Height: 11-5\" Approx. Width: 36\" Approx. Spread: 92\"Approx. Cu. Ft.: 42Per Unit Approx. Shipping Wt.: 72 lbs.816-966-6487816-966-6487There is one dent on the top rail and the bottom foot needs a little squirt of epoxy to strengthen it, but this is a $300 ladder regardless being sold for $180.foot feet Location: South KCits NOT ok to contact this poster with services or other commercial interests

Brand new ladder. I thought I needed a ladder this big, turns out I dont. Its a few months old and still in perfect shape. Brett (913) 721-3519 Location: KC,KSits NOT ok to contact this poster with services or other commercial interests

I have a new Husky side impact 3/8 and a 1/2 front impact by sanborn.They both are in great shape I have purchased Blue Point so I dont need these anymore.They have always been oiled properly and sure they have plenty of years left ahead.40 cash for husky,80 cash for sanborn,100 cash takes both.Paul 816-361-8879. Location: skcits NOT ok to contact this poster with services or other commercial interests

Great price for truck bed tool box. e-mail with any questions Location: Northland area,KCMOits NOT ok to contact this poster with services or other commercial interests

Craftsman table saw, Contractors style with stand, works like new Location: Northland area, KCMOits NOT ok to contact this poster with services or other commercial interests

2005 John Deere 317 Skid Steer. NEW ENGINE, 1500 hrs on the rest of the machine. Cab, Heat, A/C, Aux hyro, hand controls, smooth and tooth bucket. MUST SELL BY TUESDAY!!!! CALL 816 665-1172 Location: KCits NOT ok to contact this poster with services or other commercial interests

This set is in great condition. This is about half of what a new one costs with no sales tax or shipping costs.$125 cash or pay pal/credit card!!!Use it to mortise hinges for 1 door or 100.816-585-3990 Location: KCits NOT ok to contact this poster with services or other commercial interests

This is a LIMITED EDITION Mac Tools BRICKYARD 400 toolbox. I purchased this box New and it has served me well. I purchased a bigger box so I no longer need this one. box is 41\" wide, 21\" deep, and 65\" tall. This toolbox is in very good condition and comes with the custom Brickyard 400 cover. Drawer liners in every drawer, most of the drawers in the bottom box have double liners. Please call me with any questions or to make arrangements to see this rare toolbox. Thanks, Bob 816-914-9336 cell Location: NKCits NOT ok to contact this poster with services or other commercial interests

This is a Pace American 24 foot enclosed trailer. The features include: 2 5/16 ball hitch, 7000 pound tandem axle, a drive up reinforced door in the back (4500 lb capacity), a side entry door, e-track down the full length of each side, 4 infloor tie downs, 6 way canon style electrical connector, working lights (inside & out), a winch with controller, and a DOT approved break away control kit. Asking $6000/OBO Location: KCMOits NOT ok to contact this poster with services or other commercial interests

GENERAC 4000XL with wheel kit installed. 7.8 HP, Quiet & Fuel efficient. Runs& Works GOOD. Bought new at HOME DEPOT. go check the price.Brian 816-550-0159 Location: KCKits NOT ok to contact this poster with services or other commercial interests

Maytag wringer washer & rinse tubs for shop use. Great for washing shop rags.Brian 816-550-0159 Location: KCKits NOT ok to contact this poster with services or other commercial interests

CRAFTSNAN Professional 12\" Dual Bevel Compound Miter Saw. Mew in Box. $340 & tax at SEARS.Brian 816-550-0159 Location: KCKits NOT ok to contact this poster with services or other commercial interests

Craftsman shop table, 40 T x 24 W. With 4 craftsman swivel stools. All very good condition.$250 Cash only.Brian 816-550-0159 Location: KCK by Speedwayits NOT ok to contact this poster with services or other commercial interests

snap on equipment2 Snap on testers, a fog leak detector and carbon clean. Both in working order and clean, Make offer.call 913-915-5562 Location: kckits NOT ok to contact this poster with services or other commercial interests

Makita G6100R Portable Generator.I bought this generator 4-5 years ago and it has only ran a couple of hours. Been sitting in the basement ever since. This is a commercial/industrial generator. New cost is $2400 & Freight. First $750 owns it, I wont hold first buyer owns it.Brian 816-550-0159 Location: KCK near Speedwayits NOT ok to contact this poster with services or other commercial interests

Craftsman 10 Amp Reciprocatiny saw. Like new. Quick change blade. Adjustable foot.Brian 816-550-0159 Location: KCK near Speedwayits NOT ok to contact this poster with services or other commercial interests

Duofast coil framer. KDN-75L. Good condition. Brian 816-550-0159 Location: KCK near Speedwayits NOT ok to contact this poster with services or other commercial interests

Old iron \"Sears\" scroll saw from probably the 40s in good working order. Heavy duty! all cast iron & big... this is not a craftsman/sears piece of plastic, but a serious saw. Best way to reach me is by phone 816-729-5060 Location: KC West bottomsits NOT ok to contact this poster with services or other commercial interests

Walker turner bench/table top drill press. Heavy duty, I replaced the motor from the original 3 phase with a Dayton. Good Drill press that Ive had for years, but just dont need two. Best way to reach me is by phone 816-729-5060 Location: KC west bottomsits NOT ok to contact this poster with services or other commercial interests

Power Kraft Lathe - I believe the size is 12x36. Includes chisels and bowl turning plate. Best way to reach me is by phone 816-729-5060 Location: KC West bottomsits NOT ok to contact this poster with services or other commercial interests

porter cable router 1 and 3/4 model #690lr heavy duty router. comes with a porter cable dove tail jig, over 40 router bits, depth gauges, extra base plates, and more. $ 600.00 worth of equipment for only $200.00 all in very good shape I just dont need it any more. call todd @ 816-258-0114. thank you for looking. Location: so kc moits NOT ok to contact this poster with services or other commercial interests

Heres a pic. It IS BARELY used. Looks and runs Like NEWNOT of my exact one but it IS this cleansaw w/ case$80 CASH816-456-9128 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

Heavy-Duty Deep Cut Variable Speed Band Saw Kit - D28770Kw/lightits been stightly used, Very strong unit. They sell for over $300. $150 CASH816-456-9128 Location: kcmoits NOT ok to contact this poster with services or other commercial interests

Decent Tool box needs some work on bottom drawer has some misc. tools some craftsman some off brand come take a lookKirk816-838-2595 Get Your Free Craigslist Hit Counter! Location: North KCits NOT ok to contact this poster with services or other commercial interests

Nice Tool bags Used For Rough in carpentryKirk816-838-2595 Get Your Free Craigslist Hit Counter! Location: North KCits NOT ok to contact this poster with services or other commercial interests

Used very Little Hook and Loop TypeKirk816-838-2595 Get Your Free Craigslist Hit Counter! Location: North KCits NOT ok to contact this poster with services or other commercial interests

Red Metal Gadget/Tool Box by Circulon21\" length, 4\" deep, 3\" heightGood quality, sturdy metal construction with lockable latch.New and unused, but a few small surface scratches.$8.00. Cash only please. Reply to email to contact. Location: Midtown KCits NOT ok to contact this poster with services or other commercial interests

FREE Tai-manufactured 1/2\" 6-point socket for the asking. Ive got two but only need one. Throwing one away seems wasteful. Keeping both wastes my toolbox space. Its available for pick it up evenings & weekends near Grandview Road & Banister Road in south K.C. Weekdays its available near 87th & Lackman in Lenexa. Email if interested. Remember to recycle. Location: SKC/Lenexaits NOT ok to contact this poster with services or other commercial interests

******* NEED TOOLS ******* THIS IS THE PLACE TO BE ************ Call george 816 359-1050Best price in town 40 hwy by the i 70 drive in Location: kcmoits NOT ok to contact this poster with services or other commercial interests

I have three (3) 43\" x 85\", 80 grit sanding belts new in the box for a wide belt sander. Stock number is PA343. I purchased these and paid $65.00 each for them. ALL for $75.00 Location: KCits NOT ok to contact this poster with services or other commercial interests

Rigid 1/2\" d handle drill $115 (costs $159 new) see link... http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100523157&N=10000003+90039+1600 . DeWalt spiral cutting saw/rotozip with case $25 Location: KC Northits NOT ok to contact this poster with services or other commercial interests

Asada Bolt Threadermodel # - 23HPcall 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

Pipe vise stand. $1251/2\" bender $103/4\" rigid bender $10Consider offers or trades - Bicycles, Motorcycles, Other tools, what do you have?Thanks,Jules Location: midtown kcmoits NOT ok to contact this poster with services or other commercial interests

I picked these tools up at auction, at a locomotive refurbishing plant some years back. A couple different brands. Well used, but work. I sold them individually on ebay a few years ago. They sold anywhere from $27 to $62. Just wanting them all to go away, but will sell them for $30 apiece if interested. Or Ill entertain trades..........smaller tools, bicycles, motorcycle or let me know what you have.Thanks.... Location: midtown kcmoits NOT ok to contact this poster with services or other commercial interests

I have a new Husky side impact 3/8 and a 1/2 front impact by sanborn.They both are in great shape I have purchased Blue Point so I dont need these anymore.They have always been oiled properly and sure they have plenty of years left ahead.40 cash for husky,80 cash for sanborn,100 cash takes both.Paul 816-361-8879. Location: skcits NOT ok to contact this poster with services or other commercial interests

Brand new these are realy neet wrenchesCall Chris 816 808 2134 Location: kcmo n.its NOT ok to contact this poster with services or other commercial interests

MILLER SYNCROWAVE 180SD TIG/ARC Welder with consumbles. 220 volt single phase power. Has cart and orgon bottle. Foot control. Will weld alumiumn and steel. Call John at 816-468-7333 or email jsharyl@quixnet.net Location: KC NORTHits NOT ok to contact this poster with services or other commercial interests

HUSKEY AIR HAMMER with 3 Bits -- Model # : H4610 --- asking $30 OBO Provides Power for Cutting, Chipping and Scraping --- with an Extended triggerProduces 3000 hammer blows per minute --- Lightweight, durable composite handle Hardened steel piston and cylinder --- Avg. 4 CFM at 90 PSI --- Ergonomic Grip design Used with .401 shank chisels, the quick change retainer allows for easy replacement of chisels 3-1/4 Lbs. --- 11/16 In. bore diameter --- Front exhaust directs air away from operator Husky® 1/2\" Impact Wrench with Bit & Extension ... asking $70 OBOPush Button Forward / Reverse SwitchSpecifications: Avg SCFM & PSI: 5.4 @90 PSIG (90% usage) Continuous SCFM: 30.0 @ 90 PSIG (100% usage) --- Max. Operating Pressure: 90 PSIG Working Torque: 60 - 250 ft. lb. --- Impact Speed: 1200 l/min. Impact Mechanism Type: Single Hammer (Jumbo)Bolt Capacity: 1/2\" --- Air Inlet: 1/4 NPT (Female) Min. Hose Size: 3/8\" --- Drive: 1/2\" Sq. both tools are Brand New and still in the original box they came inif interested please contact: WILLIE ----- 913 850-9032 Location: KCKits NOT ok to contact this poster with services or other commercial interests

I HAVE A NEW WEATHER GUARD BOLT IN TOOL BOX PACK RAT 4X34\" X 12\" HIGH WEIGHT 350 BLS CALL FOR MORE INFORMATION @ (816)456-1540 OR @ joebcars1966@yahoo.com THANKS FOR LOOKING AT MY ADD Location: NORTH OF KCMOits NOT ok to contact this poster with services or other commercial interests

@@@@ We got just what you need at the best price in town@@@@@ Just call or text George at 816 359-1050or better yet just come on out to the market 8834 e us 40 any day of the week or on the weekend Open 7 days a week from9am to 9 pm @@@@@@@@@ Thanks for looking Location: kcmoits NOT ok to contact this poster with services or other commercial interests

This is not the regular \"do it your self\" model. It is the heavy duty commercial unit. New, never been used.. I am too old for this kind of toy. need $350 cash Location: kc/opits NOT ok to contact this poster with services or other commercial interests

816 529 3101 Location: in kcits NOT ok to contact this poster with services or other commercial interests

CALL 1 816 761 2626 Location: KCits NOT ok to contact this poster with services or other commercial interests

Louisville 24’ Aluminum extension ladder Model L-2121-24Type I, Aluminum Extension Ladder, 250 lb. Load Capacity,Industrial Use FEATURES Type I 250 Lbs. Heavy Duty Rating \"D\" Shaped Rungs Zinc Plated Steel Shoe QuickLatch™ Runglock System Durable All-Metal Pulley & Nylon Rope Call Steve at 816-965-5300 Location: South KCits NOT ok to contact this poster with services or other commercial interests

Louisville 20’ Fiberglass extension ladder model L-3121-20Call Steve at 816-965-5300 Location: South KCits NOT ok to contact this poster with services or other commercial interests

I have a Miller S-22P12 wire welder. I do not have any attachement just the suitcase itself. I will sell it to the highest offer as of Sunday June 15th. Matt816-214-7207 Location: South KCits NOT ok to contact this poster with services or other commercial interests

I have what i would call medium size cutting torch with everthing you need to get started immediatly. $350.00 for everthing Matt816-214-7207 Location: South KCits NOT ok to contact this poster with services or other commercial interests

I have 6 boxes of Senco 2 1/4\" galvanized coil nails. Only $50.00 a box this well below retail value. all boxes are brand ne and in good condition. I will sell individual boxes or all of them together.Matt816-214-7207 Location: South KCits NOT ok to contact this poster with services or other commercial interests

Briggs and Stratton 3 hp Fresh Air Blower with 15 foot ventilation hose.Call Steve at 816-965-5300 Location: South KCits NOT ok to contact this poster with services or other commercial interests

Graco Magnum DX Paint Sprayer. 3/8 motor. Used twice. Pump Armor after project. Paid $225, asking $100. NO TRADES DONT ASK Here is a link to the exact model on ebay. http://cgi.ebay.com/NEW-Graco-Magnum-dx-Airless-Paint-Sprayer-Homeowner_W0QQitemZ200347520970QQcmdZViewItemQQptZPaint_Paint_Supplies?hash=item2ea5a48fca&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1205%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50 Location: KCits NOT ok to contact this poster with services or other commercial interests

Lightly used Kawasaki Cordless Drill-Driver with extra battery and charger, case and assortment of bits and drills. It is charged up and ready to try. Email or call Jerry 913-593-9621 or Allison 816-665-8390. Thanks Location: Argentine/KCKits NOT ok to contact this poster with services or other commercial interests

I am selling a used KRL-761B snap on rolling tool cabinet. It is 54\" wide x 24\" deep. It is the 11 drawer model with a full length top drawer. It is in very good condition with only one small dent on the back. I no longer need this box and need to pay it off. If interested email or call at 816-309-2110. Location: NKCits NOT ok to contact this poster with services or other commercial interests

For Sale Large 200 gal Quincy Air Compressor Model 4110 serial #727970l 15hp 3ph all electrical boxes included came out of chevy dealer that closed up shop, it was runing like new when taken out. This is a heavy duty compressor and you wont fine made in china on this one. You can find all replacment parts from Quincy air compressos on the internet. Asking $800 660-641-4697 Location: Lexington 45 miles east of Kcits NOT ok to contact this poster with services or other commercial interests

For sale 2 used Crown pallet jacks. Came with some pallet racking and I dont know nothing about the jacks Asking $75.00 each Location: Lexington 45 miles east of Kc its NOT ok to contact this poster with services or other commercial interests

Asada Bolt Threadermodel # - 23HPcall 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

Lagun Mill (Horizontal and Vertical)Model # - FU4-LA15x70 in. tablecall 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

Lindberg Kilm w/crucible and accesories240 volts 3-phasecall 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

Raymond Straddle Liftmodel # - EMB10Cap. - 2204lbsAll new batteries!call 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

1 1/4ton hoist - $2503 1/2ton hoist - $300 each1 1 ton hoist - $400some are 3phase and some strictly 440will sell all together for $1000call 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

Paragon Print and Apply Labeling SystemModel # - 8801010call 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

Langsford International... 1 scale, 3 readoutsModel # M2103Single Phasemake offercall 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

2 MR Multivac Conveyor Labelermodel # - MR333$300 eachcall 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

Hitachi Portable Ink Jet PrinterModel # - PX-D26OUCall 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

Accraply Portable LabelerModel # - 230 HOPcall 816.506.0506 Location: KCits NOT ok to contact this poster with services or other commercial interests

I have 2 Presto straddle lifts. 2700lb Cap. Model # - PS2762-50 $900 eachCall 816.506.506 Location: KCits NOT ok to contact this poster with services or other commercial interests