I have 2 compressors so this one needs to go. I bought it from D&B for $1200 3 years ago but only used it a few times. If you are interested please call me. thanks Ron 713-3492 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Rigid 300 pipe threading machine with extra dyes. Recently serviced. Good condition works great. Please call if interested,do not email, too many scammers.$1900 208-249-7013 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

I used to repair office machines and this was my tool box.I believe it was the \"Admiral\" model and cost over $100 new, back then.Anyway, its still in pretty good shape and I am selling for $10 bucks.I washed it up a little, but could used a thorough cleaning if using it for professional purposes.First person here gets it.See pictures for detail. Location: Nampa (Amity near Happy Valley)its NOT ok to contact this poster with services or other commercial interests

This ad is for a pair of Provision Pivit ladder jacks. I bought them a few months ago to use around my house and have only used them maybe 2 times. Near new condition, just a little dusty from storage. These go for about $90 each new. Thanks. jstbldit@gmail.comScammers will be reported, and any bogus cashiers checks sent will be given to the police............ Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Used but works well, Wacker upright compactor. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Senco Airfree Finish Gun. comes with 1 batery charger and hard plastic case. The picture shows 2 batteries but only 1 works. If interested please email jstbldit@gmail.com or Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Dynatec’s Dynamini model # N52GCSI, 120 v, 1800 watt, 3.2cc/rev, gear pump, hopper fed, hot melt glue applicator, with digital programmable controller.Also 12’ of 120v heated hose And Dynatec DG11 hand applicator with axial swivel, & right angle swirl attachment.Manuals, extra glue, toolsIf you have hot melt glue to apply, to lumber, composites, P/E, cardboard, foam, etc…. this is the unit. Will accurately supply hot glue to a spot, bead, a wide patterned swirl, (for sheet lamination). Paid $3200.00 as a demo gun, very little use. Super sale $1900.00 Ph 208-466-0133 Location: S Nampaits NOT ok to contact this poster with services or other commercial interests

Call or Text 208.409.4684 Brand New in Box with manuals and 2 Year Warranty registration. MTD Yard Machine 8 ton compact log splitter This compact unit operates in the horizontal position. * Large hardened steel wedge with log cradle * Retractable cylinder and 7” wheels for easy storage and transport * 19” maximum log length * 123cc OHV Engine Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Sear Craftsman Air Compressor 3 hp and 20 gallon tank. Ive owned it for 10+ years and it still works fine. I got a bigger, better, upright model for Fathers Day and dont need this one. If interested, my cell # is 573-7872 or reply via e-mail thru Craigslist. I can deliver it in Nampa area. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Has some use but still works great. Has all acessories and operators manual. If interested call Robert 989-9921 or email gravesrobert357@yahoo.comHere is a link to Smithys website for detail on the Super Shop http://www.smithy.com/product_home.php?cid=18&scid=19&pid=1003 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

We have scaffold for sale. There is 7 sets of 5 foot, includes wheels and cross bars, asking $240.00 per set. There is 2 - 6 foot sections with wheels, planks and crossbars, asking $300.00 a set. There is 4 planks for the 5 foot scaffold, asking $60.00 each....If interested please call 353-9595 or email storm3374@yahoo.com ( the pics are just part of what we have ) Location: Nampaits NOT ok to contact this poster with services or other commercial interests

RIDGID THREADER WORK GOOD 249 1758 Location: nampaits NOT ok to contact this poster with services or other commercial interests

Bought new and used one time. The specifics are: 1 HP, 12 inch, 5 inch cutting depth capacity, table tilts 0-45 degrees right, 13x13 inch work table. Email or call 208-631-8376 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

4 drawer cabinet. Great condition. Sentry 100 StaticGard. 30\"wide x 30\"tall x 28\"deep. No key.Mark 906 - 9901 Location: nampaits NOT ok to contact this poster with services or other commercial interests

3/8 in drive 11 in long proto torque wrench and case like new condition. 880-5065 trade for?????? Location: nampaits NOT ok to contact this poster with services or other commercial interests

This ad is for a pair of Provision Pivit ladder jacks. I bought them a few months ago to use around my house and have only used them maybe 2 times. Near new condition, just a little dusty from storage. These go for about $90 each new. Thanks. jstbldit@gmail.comScammers will be reported, and any bogus cashiers checks sent will be given to the police............ Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Used but works well, Wacker upright compactor. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Senco Airfree Finish Gun. comes with 1 batery charger and hard plastic case. The picture shows 2 batteries but only 1 works. If interested please email jstbldit@gmail.com or Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Contact (208) 936-3430Model Number; 916708NEW In BoxComes with; 100lb Container with 8\" Wheels * Sandblasting Gun & HoseUser Manual Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Snap-On Cordless- 1/2\" drill, 1/2 impact, flashlight, 2 batteries, home charger, 12 volt auto charger. All in great shape. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Wagoner paint eater. Call caleb. 371-3374 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

powermate pressure washer for sale looking for 300 & local pickup. unit is two years old & was perchased at lowes, but has never been used & is in great condition. for more info please call @ 208-353-0257 & ask for jeff isom. SPECIFICATIONS*2750 psi*6.0 GC190 honda motor*wieght 9 lbs*3600 RPM Location: nampaits NOT ok to contact this poster with services or other commercial interests

nylon tool belt, large size with suspenders. Anso-tex textured nylon. 22.00 208-461-5513 Location: nampaits NOT ok to contact this poster with services or other commercial interests

(great work bench)good sturdy desk.has some nice drawers.great for anything like a computer desk.good cond,call 919-2707.cash only Location: nampaits NOT ok to contact this poster with services or other commercial interests

Air Compressor has been used two times. It is pretty much new and in Great Condition. Comes with 25ft air hose.This sale is for cash only. No trades today. Thanks.Call Sean @ (208) 989-4118 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Graco texture/stucco sprayer, TexSpray RTX 1000. Used one year.For water-based materials only. Great for drywall texturing and stucco.New price was $1,200. Will sell for $500Hoses,attachments, and manual included.Call 208-713-2336. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

16 all american tool box.tool box in good cond would be good to carry in you car or your truck..call 919-2707.cash only.or email me at cameroman95@msn.com Location: nampaits NOT ok to contact this poster with services or other commercial interests

FOR SALELOCKER CABNET 75.00BLOCK WINDOWS 150.00 EACH 4X4OLD STOVE 100.00 SEE MORE PICTURES IN COLLECTABLESSCROLL SAW 100.00 IF YOU KNOW ANYONE INTERESTED PLEASE LET THEM KNOW WHAT WE HAVE. Location: NAMPAits NOT ok to contact this poster with services or other commercial interests

This is a Champion 3500 watt with a 6.5HP engine that is in very good condition. Has wheel kit (rubber air tires), handle, low oil shut off, two 110v double outlets, one 120/240v twist lock outlet, and one 12v outlet for charging batteries,etc. Starts very easy and is also very easy to handle. Either respond to this ad or call Jim at 590-3603. Please call between 6:00am and 7:00pm. Thanks for looking. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

King brand manual pallet jack, looks like picture but mine has a headache rack. needs service. $35.00 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

like new only used few times , it is a skillsaw legend brand 12 amp 2.4 hp motor with nice locking case with handle and tool to change the blade 35 dollars cash obo ,thanks and call anytime , mike 353-0101 Location: NAMPA/CALDWELLits NOT ok to contact this poster with services or other commercial interests

Power Trowl 3 foot blades good -- Item ran great, but has not been used for years- Stored inside 225.00 or make offer 208-890-6223 Location: North Nampaits NOT ok to contact this poster with services or other commercial interests

King brand 5500 pound pallet jack with headache rack. like photo but with gaurd. Looks good but needs a wheel and service. $35.00 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

im sellin my torch dont need it takin up space small can carry or put on the wall or travel 949-0103 Location: NAMPAits NOT ok to contact this poster with services or other commercial interests

HITACHI GOOD CONTRUCTION SAW $60 YR GETTING A STEAL WITH THIS WONT LAST AND 2 BELTS ONE HAS SASPENDER STAPS SELL BOTH OF THEM 4 $25.00CALL OR TXT 949-0103 THANKS Location: NAMPAits NOT ok to contact this poster with services or other commercial interests

I am selling my metal saw horse it is 38 inches wide and can be adjusted in height, it can also fold up. Feel free to ask any questions just call Lisa at 866-9669. Location: NAMPA near amityits NOT ok to contact this poster with services or other commercial interests

selling this greenlee fish tape for only 25 dallors Location: nampaits NOT ok to contact this poster with services or other commercial interests

selling this great gun for 50 dallors or best offer i know this will not last long i have seen others on here for over 100 well hurry and will not hold unless are serious about the senco-matic nice gun Location: nampaits NOT ok to contact this poster with services or other commercial interests

Snap On MM250SL MIG Welder with extra spool gunCheck out the link for specs http://buy1.snapon.com/catalog/item.asp?P65=&tool=shop&item_ID=12618&group_ID=1736&store=snapon-store&dir=catalogAlmost New 2400.00 OBOCall if interested 484-3768 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

I have a 60 gallon 6 hp craftman air compressor for sale it has a electric auto drian. and its 240 vt. It has no problem running air equitment like da sanders, air rackets and ect. 941-1599 Location: nampaits NOT ok to contact this poster with services or other commercial interests

Craftsman 3 blade Jointer (4.5\"). Excellent working condition, blades just professionally sharpened. 1hp motor. Solid machine - works great. Cash only please. Call 250-1517 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Have 3 Lawnmower 22\" blades Never used still in package $4.00 each please call 208-461-9663 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

great working pressure washer call if interested 965-7200 2500 psi 5.5 true honda well maintained you can hook it up and try before buying thanks Location: nampaits NOT ok to contact this poster with services or other commercial interests

This air hammer is new and has never been used. Comes with one two chisels. Model number 024-0200. Please call 208.467.4892 for further information. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

This spray gun is new and has never been used. Model number is 010-0022. Please call 208.467.4892 for further information. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

This impact wrench is new and has never been used. Model number is 024-0198. Please call 208.467.4892 for more info. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Craftsman heavy duty 12\" compound saw. 461-1022 Location: nampaits NOT ok to contact this poster with services or other commercial interests

I have never used 36\" pro vision inspection tool with case, great for seeing in small places like drains concrete holes ect. Requires 2 AA batteries. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Used but works well, Wacker upright compactor. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

I have a used but good working conditions hurricane fan.Century 400. 1/2hp air mover, 3 speed, and adjustable directional flow. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Senco Airfree Finish Gun. comes with 1 batery charger and hard plastic case. The picture shows 2 batteries but only 1 works. If interested please email jstbldit@gmail.com or Location: Nampaits NOT ok to contact this poster with services or other commercial interests

I have 1 used fullsize pickup tool boxl with key. $125.00 Delta Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Miller Thunderbolt AC/DC 225/150 Welder for Sale includes cart and long leads as seen in the pictures Please call 461-9696 M-F 8-5 no emails please. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Here is a Titan trash pump. 3 inch, 5.5 hp, 264 gpm. Brand new in the shrink wrap. Retail is $1700, I am selling for $700. Call 208-475-4039. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Here is a Titan 8000 gasoline industrial generator. Brand new in the shrink wrap. 120/240 volts. 7200 watts continuous, and 8400 surge. List price is $3500. I am selling for $1500. Call 208-475-4039. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Here is a Titan diesel generator, model 6500. Brand new, still in shrink wrap. It has electric start. Use 120 or 240 volts. The motor is 9 hp. Cost over $5000, selling for $1800. 208-475-4039 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

snapon tdm99117b metric tap and die set from 14 to 24 mm if intrested please call 954 1858 Location: nampaits NOT ok to contact this poster with services or other commercial interests

snapon fb3330 feeler gauge set it has .010 to .030 if intrested please call 954-1858 Location: nampaits NOT ok to contact this poster with services or other commercial interests

snapon 1/4 torque wrench preset for assembly line work at 15 in.lbs. if intrested please call 954-1858 Location: nampaits NOT ok to contact this poster with services or other commercial interests

matco unipro pliers is made for removing hose clamps and spark plugs if you are intrested call me at 954-1858 Location: nampaits NOT ok to contact this poster with services or other commercial interests

This a metal shaper and is old but it does work good. Call Jim 461-4440 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

comes as shown in picture. Few years old but still cuts true. $90.00 cash o.b.o. Reply by email. Leave BOTH name and number and Ill call soon. Need BOTH name and number for a reply.Thanks Location: nampaits NOT ok to contact this poster with services or other commercial interests

I got this for Christmas and Ill tell you \"Im not a welder\" I used it about 5 to 10 times so it is just like new.Model# 20569Here are the details I pulled for it off Sears.comWeld mild steel, aluminum, stainless steel and cast iron with this versatile welder. A large PC board, multiple power settings and infinite adjustment wire speed settings. * Easily converts from gas to no-gas operation * 8 ft. torch hose, operates from standard 120V outlet * Automatic thermal safety switch prevents overload * MIG welder uses solid-core wire (requires tank & shielding gas, sold separately) * Gasless welder uses self-shielding flux core wire ideal for welding in drafty areas * Welds thin 24 ga. sheet metal up to 3/16 in. steel for versatility/wide range of uses * Uses .024 and .030 in. solid core wire or .030 flux core wire * Accepts 4 to 8 in. spools - up to 12 lbs. of wire * 5 -.023 contact tips, 5 -.030 contact tips, 5 .040 contact tips, starter spool of wire * MIG gun, face mask, starter wire spool, hammer/brush and welder cart included Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Karcher 1000 psi pressure washer. It works, but has a leak on the plastic piece that connects the hose to the pump. I found it online for $10. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Hobart Tigwave 250 AC/DC Aluminum Welder with bottle. Used approx 6-8 hours. $2250.00 obo. 208-466-1774 or 208-467-9219. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

14\" World Diamond Source Blue Thunder saw blade. Retails for $550+ This blade has been used, but has a ton of life left. This is perfect for any job involving pipe cutting!http://www.worlddiamondsource.com/wds1.aspx?Category=439f9acc-3ab4-44f0-a2f9-cfc0034a94d4$125 OBO Totally open to offers! Location: nampaits NOT ok to contact this poster with services or other commercial interests

In good condition. call me at 989-0419 if interested. thanks

Craftman router and table. Like new. Call 208 250 4527

9 inch drill press. Like brand new. call 208 250 4527

Brand new router, table and bits by Skil.Never used!!!!

Heavy duty Millwaulkee 9\" grinder, with extra grinding wheels.

6x10 enclosed Interstate utility trailer in excellent condition with no shelves built in. double barn doors in the back and single door on the side. If interested, please call Dusty @ 794-6793

Ryobi 10\" tablesaw model BT3100Used very little I got a bigger saw and dont need this one anymore.Sliding miter attachmentRouter attachment kit that mounts in table extentionDado throat plate and 2 zero clearance throat platesWheels for tilt rolling$400.00 OBO call Clayton at 697-7447, Thank you.

Delta 15\" planer dual speed in excellent condition!!! No dings in blades. 220 volt only used a handful of times.$1000 please call Dusty if interested at 794-6793

works w batteries used twice call Randy @ 353-9401