MUST SELL!! SNOWBLOWER CUB CADET. LOOKS AND RUNS LIKE BRAND NEW! Location: MIDDLETONits NOT ok to contact this poster with services or other commercial interests

7.50 Location: Middletonits NOT ok to contact this poster with services or other commercial interests

$17.00 Location: Middletonits NOT ok to contact this poster with services or other commercial interests

This is a Jet branded, HTC mobile base made in USA. This is a 1 piece welded base with the extension to support saws w/ 50\" fence and table. The bracket on the very end bolts on to allow for height adjustment on extension table legs.Th actual base opening dimension is 21\"x21\" so, your TS base will need to fit WITHIN those dimensions. As long as you are within a few inches it should work fine. Should work with almost any cabinet saw and many contractor style saw depending on your base and leg dimensions. The extension comes out another 41\" or so for table leg support bracket. The total length of the unit is 65\" or thereabouts. Even if you have a shorter fence you could still use this fence to support just a saw or add in an extension table.As you can see in the pic the unit is brand new, the white box has the casters and hardware. Email through CL for more info. Local sale only. Location: Middletonits NOT ok to contact this poster with services or other commercial interests

Jet Premier Xacta Fence II Commercial Rip Fence w/ Micro Adjust. Made in the USA by HTC and branded Jet. Physically the same as the HTC fence which retails at over $350. This is a BIESEMEYER style fence. $95 FIRM for the bare fence (no rails) Email though CL or call (208) 906-3331 Designed for commercial applications, features Micro-Adjustor, quick-change nylon fence faces, tough powder coat finish, and the heavy-gauge steel construction required for industrial use.Exclusive Micro-Adjust feature eliminates the need to \"tap, tap, tap\" the fence into position for the cut. The spring-loaded quick lock lever on the Micro-Adjust feature is fast and simple to use. Dialing in your cut is easy and, more importantly, extremely accurate. Fully adjustable for square, parallelism, and clamping pressure.The second pictures show the router fence attachment accessory. I have that as well for $50 Location: Caldwell/Middletonits NOT ok to contact this poster with services or other commercial interests

Clarke Delco high pressure high temp. commercial washer.This was origanally a steam cleaner. It is now a HOT water cleaner.Burner uses diesel fuel.The pump was over-hauled a couple of years ago, and the machine was serviced. It works very well, gets VERY hot. It does have a switch problem, and a couple of minor issues, but a bargain for the pricc. $325 Please call 585-3380 Location: Middletonits NOT ok to contact this poster with services or other commercial interests

SHOP SMITH MARK V IN VERY GOOD/EXCELLENT CONDITION. IT INCLUDES JOINTER, JIG SAW(NEEDS A LITTLE WORK), LATHE, AND ALL OTHER STANDARD FUNCTIONS. AS YOU CAN SEE FROM THE PICTURES, THERE ARE MANY OTHER ACCESSORIES AND ATTACHMENTS,BLADES, SANDING DISCS, BOOKS, MANUALS, EXTENSIONS, CHUCKS, LATHE TOOLS, AND THE SHOP SMITH INCLUDES THE WOOD ORGANIZER RACK. I INHERITED THIS FROM MY DAD AND NEED TO SELL IT AS A LOT. IF YOU WANT IT SHIPPED, YOU NEED TO MAKE ARRANGEMENTS AND I WILL PUT IT ON A PALLET FOR YOUR SHIPPER TO PICK UP. IT ALL WORKS GREAT AND HAS BEEN TAKEN CARE OF. THE JIG JAW MAY NEED A LITTLE TLC TO GET IT BACK UP TO PAR. PLEASE EMAIL WITH ANY QUESTIONS. I KNOW THIS IS WORTH QUITE A BIT ESPECIALLY WITH ALL OF THE EXTRAS. SOMEONE WILL GET A GREAT DEAL ON THIS WITH NO RESERVE! Would be willing to trade for utility trailer or motorcycle like a Honda CRF 150F. Location: Boise, ID-Middletonits NOT ok to contact this poster with services or other commercial interests

Have a great shop heater made by sunkiss. it is a sunkiss-sprint model 978.works off of both electric, and propane. it is a forced air heater and is great for directional heatwhile working on a project. large propane tank with new style valve in cluded. whole thing is set on three wheels so it is easy to move around the shop even when propane cylinder is full. has a timer box for electric control and regulator for the propane.call with questions 585-9647. asking 200.00, a fraction of original cost. Location: Middletonits NOT ok to contact this poster with services or other commercial interests

Jet Premier Xacta Fence II Commercial Rip Fence w/ Micro Adjust. Made in the USA by HTC and branded Jet. Physically the same as the HTC fence which retails at over $350. This is a BIESEMEYER style fence. $95 FIRM for the bare fence (no rails).Email though CL or call (208) 906-3331 Designed for commercial applications, features Micro-Adjustor, quick-change nylon fence faces, tough powder coat finish, and the heavy-gauge steel construction required for industrial use.Exclusive Micro-Adjust feature eliminates the need to \"tap, tap, tap\" the fence into position for the cut. The spring-loaded quick lock lever on the Micro-Adjust feature is fast and simple to use. Dialing in your cut is easy and, more importantly, extremely accurate. Fully adjustable for square, parallelism, and clamping pressure. Location: Caldwell/Middletonits NOT ok to contact this poster with services or other commercial interests

This is a Jet branded, HTC mobile base made in USA. This is a 1 piece welded base with the extension to support saws w/ 50\" fence and table. The bracket on the very end bolts on to allow for height adjustment on extension table legs.Th actual base opening dimension is 22\"x22\" so, your TS base will need to fit WITHIN those dimensions. As long as you are within a few inches it should work fine. Should work with almost any cabinet saw and many contractor style saw depending on your base and leg dimensions. The extension comes out another 41\" or so for table leg support bracket. The total length of the unit is 65\" or thereabouts. Even if you have a shorter fence you could still use this fence to support just a saw or add in an extension table.As you can see in the pic the unit is brand new, the white box has the casters and hardware. Email through CL for more info. Local sale only. Location: Middletonits NOT ok to contact this poster with services or other commercial interests

Jet Premier Xacta Fence II Commercial Rip Fence w/ Micro Adjust. Made in the USA by HTC and branded Jet. Physically the same as the HTC fence which retails at over $350. This is a BIESEMEYER style fence. $95 FIRM for the bare fence (no rails).Email though CL or call (208) 906-3331 Designed for commercial applications, features Micro-Adjustor, quick-change nylon fence faces, tough powder coat finish, and the heavy-gauge steel construction required for industrial use.Exclusive Micro-Adjust feature eliminates the need to \"tap, tap, tap\" the fence into position for the cut. The spring-loaded quick lock lever on the Micro-Adjust feature is fast and simple to use. Dialing in your cut is easy and, more importantly, extremely accurate. Fully adjustable for square, parallelism, and clamping pressure. Location: Caldwell/Middletonits NOT ok to contact this poster with services or other commercial interests

MARK 1 Table saw. 1 1/2 HP motor, Belt driven. This has been a great saw for my shop. Table will let you cut up to 45\" in length . Delta Unifence is only 1 year old. also have the old fence to go along with it. I have encased the bottom so it can be hooked up to a dust collection unit. Also comes with wheels to make it mobile. Set up to run single phase 230 volts but can easily be switched to run on 115 volts. My phone is 989-9258 to set up a time to see it. Also have portable stand to sit on. Location: Middletonits NOT ok to contact this poster with services or other commercial interests

Dewalt XRP 18V Cordless Drill & Charger for sale. Battery is NOT included. Regular retail price $279.99, asking $75.00.Call 283-6654 with questions and to get directions. Cash only...no checks accepted. First come, first serve! Location: Middletonits NOT ok to contact this poster with services or other commercial interests

Worx 10Amp sawzall reciprocating saw w/ carrying case these sell for around $150 at the retail stores. $65 email through CL. Thanks Location: Middletonits NOT ok to contact this poster with services or other commercial interests

1. Artisan 618-1SC (See details below) Comes with Table and Accessories. Priced at $12002. Artisan Toro 4000 (See details below) Includes table & accessories. Priced at $3400DETAILS:1. Artisan 618-1SCCompound Needle Feed Walking Foot MachineFeaturesWalking Foot Machines with Standard Interchangeable 111w Style Presser Feet Large Rotary Hook and \"M\" Size Big Bobbin Forward and Reverse Manual Lubrication with Oil Reservoir to Lubricate the Rotating Hook Extremely Quiet and Reliable Operation Maximum Stitch Length 2.5 stitches/inch. Extremely Long Complete with table stand and motor Thread sizes from 33 to 207 The machine comes adjusted for size B-69 with a 135 x 17 # 22 needle Complete with table stand and motor 2. Artisan Toro 4000Artisan Extra Heavy Duty Leather Stitcher Toro 4000 Extra Heavy Duty Cylinder BedThe Ultimate in Leather Sewing Machines. Has 16” cylinder bed for sewing saddle skirting, heavy tack, harness, webbing, canvas or heavy fabric. Sew from 1/16” to 7/8” thickness with adjustable stitch length and reverse feed for back-tackingWith Heavy Duty Adjustable Pedestal Stand, Servo motor 2-1 Speed Reducer. Caster Wheels optionalCompare with \"Juki\" TSI-441 SPECIFICATIONS:Sews up to 7/8\" of Leather.Built in Bobbin Winder.16\" Long Cylinder.Sews up to Size 415 Thread.Schmetz Needle 794SSerious Inquiries call Lane at 208-866-5278. Location: Middleton, IDits NOT ok to contact this poster with services or other commercial interests

DeWalt 1/2\" Electric Impact Wrench, NEW! The DW292 Features:• 345 ft-lbs of deliverable torque in forward and reverse.• 1/2\" detent pin anvil .• AC/DC forward/reverse rocking switch.• Soft grip allows for superior ergonomics.• Ball-bearing construction for increased durabilitySpecifications:• Amps: 7.5• No Load Speed: 2,100 rpm• Max Torque: 345 ft-lbs• Impacts/Min: 2,700 bpmI bought this wrench new about a year ago and have never used it. Sells new for $180. Your cost only $125208 989 6636 anytime Location: Middletonits NOT ok to contact this poster with services or other commercial interests