Coleman Powermate 1850 Generator used 5 times. Priced at ACE online at $539.00 Perfect Condtion call Mike 208-409-0555http://www.acehardwaresuperstore.com/coleman-powermate-sport-1850-generator-p-17189.html?ref=42COLEMAN POWERMATE 1850 GENERATOR Four-cycle, 3.5HP B&S engine 1850 maximum watts, 1500 running watts 1.3 gallon gas tank 7 hours of run time at 50% load Perfect for tailgating, camping or other outdoor activities Two 120 volt DC outlet provides 15 amps of power, ideal for battery charging and smaller DC devices, equipped with automatic circuit breaker protection 12 volt DC charging cables included Fully enclosed to reduce noise Carry handles on both sides Conveniently located fuel shut-off valve Rubber feet minimize crawling and reduce vibration Spark arrest muffler approved by US Forest Service to help prevent fires Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Genie Lift GL-4 STDLike New- Excellent Condition- Used Very littleThese are a few of the thousands of applications:Shipping/receiving Transporting appliances Lifting heavy material to or from shelves Moving office equipment Installing ceiling/wall appliances Record storage and retrieval HVAC installation and repair Lifting equipment/computer products in retail stores Handling cement bags Lifting and moving automotive parts Purchased new at Brown Rental for $2,764Still under warrantyhttp://www.genielift.com$1,500 cash Location: Meridianits NOT ok to contact this poster with services or other commercial interests

My father-in-law got me this Bosch 1677WD circular saw as payment for building out his basement. I havent used it much since. Runs great and is clean and in great shape. Mark - 559-2097 Location: Meridian - Locust Grove / Victoryits NOT ok to contact this poster with services or other commercial interests

Drill/Driver Kawasaki 19.2 volt. Two batteries and one charger like new condition. Drill/Driver DOES NOT WORK has broken gear see picture.reply to CL Location: Meridianits NOT ok to contact this poster with services or other commercial interests

This is a Stihl 390 with a 28 inch bar. It has been used for 2 full seasons in Mccall, it is in great shape and cuts like a champ. If you are interested please call Adam @ 634-8088 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Jet DC-1200 JET Dust Collector w/ Bag Kit, 2HP, 1Ph. Great condition . With extra hose and splitter Price $225.00 - OBOContact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

POWERFUL UNIT ITS A DEWALT IT IS BAD ASS WILL WASH THE @#$ OFF AN APE USED LIGHT DUTY YEAR OLD IN GREAT SHAPE START YOUR OWN PRESSURE WASHING BUSINESS WITH THIS UNIT PRICE IS FIRM 570-2782 Location: meridianits NOT ok to contact this poster with services or other commercial interests

This saw was never taken out of the box, though it has sat in the garage quite a long time. Looks like a very nice saw... to come buy it call 208-949-7389 There are other item for sale, 2 White porcelain scalloped sinks, Tubbs Snow Shoes, Motorcycle Jack, 4 Nissan Factory Alloy Wheels, never used, etc... call 208-949-7389 located in Meridian. Oh, did I say, a GORGEOUS 2007 HARLEY DYNA LOWRIDER at a steal of a price... call Location: Meridian/Boiseits NOT ok to contact this poster with services or other commercial interests

Ive got a Sullair Diesel air compressor trailer that one of my employees did not lock the hitch on, now I have a diesel air compressor that is no longer towable. It still runs, just needs a new trailer tongue for the most part. It builds A LOT of air, more than we ever needed to complete our sanblastings jobs. Paid 6000 when we bought it used, and would take $500 for you to just come get it off my lot. Give me a call at 761-1156. No tire kickers please, just too busy for that. Thanks, Bob. Location: MERIDIANits NOT ok to contact this poster with services or other commercial interests

I have had this parts washer for about 2 years now and have never used it. Alittle rough on the outside, but doesnt affect performance. If you would like to see it, please call Kyle at 830-8011. $100 OBO Location: Meridianits NOT ok to contact this poster with services or other commercial interests

DeWALT Heavy-Duty 18V Self-Leveling Interior Laser The DW079KI Features: Private mode option eliminates remote control interference between multiple rotary lasers on the jobsite Fully automatic horizontal and vertical self leveling with out-of-level shutoff eliminates user error, ensures accuracy, and reduces set up time Multi-voltage adapter accepts all DEWALT® batteries 9.6V - 18V Protected rotary head and weatherproof design deliver interior and exterior jobsite durability Bright, sharp, high power beam delivers maximum visibility, even over long distances Roy 895-8492 used 2 times have tripod and leveling rod still in the box to go with it$800Wireless (IR) remote control operated scan mode creates a \"laser chalkline\" between two points for an extremely bright beam over long distances Remote control operation so that one person can setup and aim the laser over long distances Manual Single sloping modes allows the user to set a grade ±5° Specifications: Power Supply 9.6V-18V DEWALT® Batteries Accuracy per 100 ft. 1/8 in Rotation Speed 0, 10, 60, 250, & 800 rpm Self-Leveling Range ±5 ° Indoor Visibility Range 200 (dia) ft Range with Detector (not included) 2000 (dia) ft Laser Class IIIa (5mW) @ 635nm Tool Weight 6.5 lbs Includes: 1 hour charger 18V battery laser target card wall mount wireless (IR) remote control laser enhancement glasses heavy-duty kit box (w/padded interior) • Shipping Weight: 15.00 lbs. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Two great saws. One is practically new, the other is an older model with little use.$10.00 each or 15.00 for the pair.Call Dan 284-2337 Location: Meridian and Fairviewits NOT ok to contact this poster with services or other commercial interests

This generator has new rings in it, ran like new after I put it back together. I let it set for about a year and the carburator gummed up. I have no time to deal with it. Call me at 208-351-7857 CASH ONLY AND NO WARRANTY Location: MERIDIANits NOT ok to contact this poster with services or other commercial interests

This toolbelt has no sign of wear and tear, only used a couple times. Please call me at 906-9146 if you are interested. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Nice mower no bag runs great starts easy call me at 208-406-6963 as I wont be able to check my email very much Location: Boise/Meridianits NOT ok to contact this poster with services or other commercial interests

Jet DC-1200 JET Dust Collector w/ Bag Kit, 2HP, 1Ph. Great condition . With extra hose and splitter Price $225.00 Contact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

14” wood band saw. New tires and Trunnions. Runs good . Price $150.00 Contact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

More like a full movable work shop!!! Custom built wood working bench. 3’Wx 10’Lx 3’H. Come with a Craftsman 10” Radial Armsaw MFG no. 1 71 and Craftsman router. I designed this table to be interchangeable and movable. With these rollers and arms to be able to pick it up an move it anywhere by yourself. Great for small or large shops Must see it to understand everything that can be done on it. Has several scales so you can measure board from either side. Also with board stopsNo other like it. Price $400.00 Contact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Large 24\" Adjustable Wrench. Made by Proto. Lifetime Warranty. $65.00. (208) 887--0858 Location: Eagle & Meridian Rdits NOT ok to contact this poster with services or other commercial interests

Hydraulic storage tank. Was mounted on a railroad truck. Clean inside, no leaks. Could be used for other liquids. 18\" wide, 16\" deep, 14\" high. $50.00 or offer, cash only, no checks. 887-4799. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Selling this four pieces, that really havent been used for much other than one project. Includes the Drywalling bag, the nail or framers bag, the hammer holder and the drill holster. I only used them when I built out my father-in-laws basement, so hopefully someone can get some use out of them.All are in like new condition.Mark - 559-2097 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Selling this sweet Circular saw. I used it to build out one basement. It has been sitting ever since. Its clean, runs great and includes a very nice 20amp rated extension cord. In mint condition. Please call me, Mark, at 559-2097 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

I have this 10\" Dewalt DW703 Compound Miter Saw that I have used to build out two basements. It has worked great, but I realize that it mostly sits in my crowded garage. I have the DeWalt DW7082 Vertical Clamp for it, a brand new Fine Finish Thin Kerf Blade, the Dewalt DW7084 Crown Molding cutting kit and the DeWalt DW723 Miter Saw Stand. It is the absolute complete 10\" saw setup and is in mint condition. If you decide to email me, please include a phone number. I prefer that you call me though:Mark 559-2097 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Hydraulic storage tank. Was mounted on a railroad truck. Clean inside, no leaks. Could be used for other liquids. 18\" wide, 16\" deep, 14\" high. $50.00 or offer, cash only, no checks. 887-4799. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Tool or storage box. Made of diamond plate steel, very well built. Was mounted under the bed of a flatbed truck. 20\" wide, 18\" deep, 18\" high. Good condition, not bent and no holes, door closes good. $50.00 or offer, cash only no checks. 887-4799 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Large 24\" Adjustable Wrench Made by Proto. This Wrench is guaranteed for life. $65.00. Call (208) 863=0058 for more information. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

**Large End Wrenches. Made in China. 1 & 3/8 \" to 2\". These are new.Asking $60.00. Call ; (208) 863=0058. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Used Miller regency 250 CV DC Welding Power Source and an XRA Extended Leads Air Cooled Wire Feeder.I picked these up at a business close-out auctioin. They were sold as working. I have not used them so I am selling them AS IS. I am not a welder and not familiar with weldiong equipment. Take a look at the photos and ask any questions you may have and I will do my best to answer. It looks like the wire feed gun is missing the cover, but as I say I am not familiar with the equipment. (see photos).I am selling for a Bargain Price. Similar set ups sell for over $5000.00 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Good small trimmer mower. Not self-propelled.Phone: 846-9068, 365-4309 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

10 foot long by one foot deep brake press For window installers, garage door installers and siders.For more info call Alex (208) 571-9746 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Delta Shopmaster 10\" motorized bench saw. Only been used a few times, but works great. Comes with table and instruction manual. Call or email with questions, 602-616-6328 Location: Meridian, IDits NOT ok to contact this poster with services or other commercial interests

I have a working 18v Ridgid X2 cordless drill, works but the varible speed does not function any more. This drill has a high and low gear with forward and reverse. I have a quick charge station with two batteries that I need to keep as I have a complete ridgid tool set that uses these batteries. The price is right for a decent drill, if you disagree shoot me your offer. I have already replaced it as I require very slow speed sometime. Thanks Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Custom built wood working bench. 3’Wx 10’Lx 3’H. Come with a Craftsman 10” Radial Armsaw MFG no. 1 71 and Craftsman router. I designed this table to be interchangeable and movable. With these rollers and arms to be able to pick it up an move it anywhere by yourself. Great for small or large shops Must see it to understand everything that can be done on it. Has several scales so you can measure board from either side. Also with board stopsNo other like it. Price $400.00 Contact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

9” Delta Band saw. Great condition . Price $50.00 Contact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Jet DC-1200 JET Dust Collector w/ Bag Kit, 2HP, 1Ph. Great condition . With extra hose and splitter Price $250.00 Contact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

14” wood band saw. Needs rubber tires for the wheels ($25.00) and Trunnions ($25.00). for parts < http://www.accuramachinetools.com/band-saw-parts.html> . Runs good . Price $100.00 Contact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Classic craftsman jointer (model 113) in great shape. Purchased it a year ago and never used it. Price $125.00 Contact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Delta tabletop jointer. Needs new blades. Very good shapeCall Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

HeathKit lab Oscilloscope Model 10 -18 works great, But I have not used or needed to use for years, needs to find its self a good home. Same model sells on e-bay for up to $75.00 (see Item number: 110357904907) $45.00 OBO call 863-2955 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Older engine stand in fair shape I used it a year ago to rebuild the motor in my boat, it comes apart easily for storage, I need to make some space in my garage so priced it low to move fast! call 863-2955 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Skil Belt Sander, Model 9 with carrying box, some belts and lubricant. 1940 vintage, locomotive style. Still works. Cash only. Phone 888-2555 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Sears Craftsman 10\" Radial Arm saw with stand and extra blades, manual, cover, and router table.This thing is an exceptional condition and has been in storage for the last 15 years, and still carries the Craftsman lifetime guarantee.Asking $200 obo, but am open to trades, guns, ammo, appliances,gold, silver. Stuff like that.I also have a miter box and saw Ill throw in for an extra $5 and a drill press with bits for an additional $5. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

An older bagless mower. Works just could use some good tlc.Near Linder and McMillan in Meridian.Call Bryan at 921-0141 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Some honest reliable local buyer asked me to hold this for him, his name Zach, giving his worthless word that it was sold, and promised to pick it up. Well here I am 10 days later, and now he does not answer his phone calls and has not come to get it. So it is available again, this time for $40 not the original $50 I was asking.Sandblaster no longer needed. 40 pound capacity. Needs separate compressor. Complete.JB Near Ustick and Meridian roads. Call 860-1333 See photos for more details. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

KraftTech CS185CF 7-1/4\" Circular Saw 120v - 60Hz - 12 amp Great Working Condition Location: Meridianits NOT ok to contact this poster with services or other commercial interests

A 4 inch wet ceramic tile saw. Used but works fine.Near Linder and McMillan in MeridianCall Bryan at 921-0141. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

The carpenter’s belt was only used one month. It has 3 separate pocket sections that are removable so you can use 1, 2 or all 3. It has a cell phone holder, hammer holder, tape measure holder, more slots and pouches than I can mention. Comfort belt with Quick release Button. (Carpenter Comfort Combo w/ Quick Release Buckle) Made of Canvas and Leather Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Delta 14\" Enclosed Base wood cutting bandsaw. Includes Delta fully welded mobile base and hard wired work light. Works perfectly. $400.00 208-884-3144 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Brand New PRO X series 4 1/2\" Cordless Angle Grinder. 20.4 Volt. Full Metal Gear Box And Nylon Housing. Circuit Overload Protection. Heavy Duty 1.3 MAH Ni-Cad Battery. Blow Mold Case For Storage. 7000 RPM Idling Speed. One Year Warranty. Brand New In Box, never been used or opened. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Barely used high capacity bumper jack. Its 4-6 years old but Ive only used it a half dozen times to pull fence posts out of the ground. Thats it. They sell for somewhere between $70-80 new.$35887-9451 Location: meridianits NOT ok to contact this poster with services or other commercial interests

UP FOR SALE TWOWAY CONVERTIBLE STEEL HAND TRUCK.Converts from two-wheel hand truck to four-wheel platform truck (two swivel casters). There are scratches from regular use, two swivel casters just been replaced. This hand truck is around $300 new. Great thing to have around the house or business.CALL OR TEXT ME AT 870-8080 or 870-7470. Location: MERIDIANits NOT ok to contact this poster with services or other commercial interests

Well cared for sapphire blue matco shop box. includes stainless steel top cap. CLEAN,CLEAN,CLEAN- LIKE NEW. 11 drawers/ overall measurments 57\"legnth/25\"deep/43.5\" height please call shane @ (208)954-0821 Location: meridianits NOT ok to contact this poster with services or other commercial interests

This is a SEARS CRAFTSMAN 10 INCH RADIAL SAW in great condition! ONLY $50PLEASE RESPOND TO POSTINGTHANK YOU Location: Meridian (linder/franklin)its NOT ok to contact this poster with services or other commercial interests

Honda generator EX650, super quiet model, great for camping, lights or small electrical tools. Used very little. Runs great. $400.00 or offer. 887-4799 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

UP FOR SALE TWOWAY CONVERTIBLE STEEL HAND TRUCK.Converts from two-wheel hand truck to four-wheel platform truck (two swivel casters). There are scratches from regular use, two swivel casters just been replaced. This hand truck is around $300 new. Great thing to have around the house or business.CALL OR TEXT ME AT 870-8080 or 870-7470. Location: MERIDIANits NOT ok to contact this poster with services or other commercial interests

RYOBI Table saw......80.00RYOBI skill saw 35.00JUMPER cables 20 foot new........40.00AIR RACHET 3/8......25.00......1/2........40.00CB RADIO ..........100.00AIR HOSE.............25.00CRAFTSMAN RACHET SETS.....1/4...........75.00.........3/8............75.00.................1/2...........75.00Call Carlos @208-484-7378 or Jason @ 208-703-5781 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Shopsmith in excellent condition (just looks old because it is dusty). I replaced the motor a few years back and it has seen hardly any use. I do not have any attachements...only used it for the lathe. Also have two sets of lathe tools. Makes an outstanding lathe! Tried to get better pictures...it looks old and beat up, but it is in perfect condition.$550 Chris...891-7666 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Purchased these sanders about 3 years ago and am selling due to lack of use. I have seriously only used these a couple of times and they are just taking up valuable space in my garage. Included is a nice rolling stand that I built. Would like to sell as a set. These are in perfect shape and I have all manuals and documentation. $900 Chris...891-7666 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

For sale a black Craftsman Portable Tool Box, in good condition.$30If interested please contact me at nikj23@yahoo.com Location: Meridianits NOT ok to contact this poster with services or other commercial interests

For sale a Craftsman Creeper in excellent condition.$45.00If interested you can contact me at nikj23@yahoo.com Location: Meridianits NOT ok to contact this poster with services or other commercial interests

RYOBI, 9”, Band Saw, model No. BS-902, with owner/operators manual and extra blade. Cost $114.00 new. Sell $50.00. (CASH ONLY)RYOBI, 10”, Compound Miter Saw, double insulated, model No. TS-260, with owner/operators manual. Cost $114.00 new. Sell $50.00. (CASH ONLY)CHICAGO, 10” Compound Slide Miter Saw, 1/3 Hp, single phase double insulated, model No. 90891 with owner/operators manual. Cost New $139.00.Sell $50.00. (CASH ONLY)For information call 208/830-0676. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

CRAFTSMAN, 10”, 2 HP Direct Drive Table Saw with legs, two table extensions, model No. 113.298090, plus wheels, Dado blades, saw dust collector and owner/operators manual. Cost $599.00 new.Sell $225.00. (CASH ONLY)CRAFTSMAN, 16”, 1/6 HP Scroll Saw, model No. 113.236111, with owner/operators manual. Cost $119.00 new.Sell $50.00. (CASH ONLY)CRAFTSMAN, 4 X 36”, 1/3 HP Belt/6” Disc Sander, model No. 113.226431, with owner/operators manual. Cost $129.00 new. Sell $50.00. (CASH ONLY)DELTA, 12”, 1/3 HP Drill Press, model No. 11-990, with owner/operators manual. Cost $225.00 new. Sell $100.00. (CASH ONLY)For information call: 208/830-0676 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Little Giant M-22 Multi-use ladder. this ladder is in excellent skape with only a few scratches on the decals. Please e-mail me for pictures This ladder goes from 5 ft to 9ft and the extension from 11ft to 19ft and can be stored in an area 5ft 7in.The Home Depot sells this ladder for over $500.00 dollars. CASH ONLY, And LOCAL ONLY no third partyE-mail if you have any question Location: Meridian, IDits NOT ok to contact this poster with services or other commercial interests

SEE PICTURE. READDYHEATER FOR CONSTRUCTION JOB SITES. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

Delta 16\" Scroll Saw with 4 boxes of extra blades. $55:00Jeff - 585-4321 Location: Meridian, ID.its NOT ok to contact this poster with services or other commercial interests

All Pro forced air propane heater for sale. $60 Contact # (870-9554) Location: Meridianits NOT ok to contact this poster with services or other commercial interests

call for details895-8492 Location: meridianits NOT ok to contact this poster with services or other commercial interests

Estate sale. Mr. Heater (Model MH175KT) Portable forced air heater without cart. Specs indicate can use kerosene, jet fuel, diesel, or fuel oil. Heats up to 4,200 sq. ft. $200 OBO. Please call Shelli 283-9392. Location: Meridianits NOT ok to contact this poster with services or other commercial interests

This is for a Ridgid brand Shop Vac. Has all attachments and could suck a golf ball through a garden hose! We are moving and just dont want to take it with us. Call Tom at 629-8556 with any questions. If you dont see a picture please email us, I am attaching one but craigslist seems to be having some issues with attaching photos.Thank you for looking!

I have 2 boxes of brand new high quality taps, 1 box, 12 ea, are 10-32 and 1 box, 7 ea, are 1/4-20. 20.00 ea. OBO

I have a box of misc. tools, clamps, pipe wrenches, some wrenches, screw drivers and other. Kinda like a grab bag of tools... 40.00 OBO

i think its a 30 gallon compressor.. works great and rearely used.. comes with 50 air hose $100.00 and i also have a small set or air tools in a case for an additional $25.00

Power Mate paint roller, lightly used, clean, and works great. $20 OBO. Phone 887-8551

10\" Rockwell, extra blades, sanding disk.

Hello I am selling a brand new in the box Delta chop saw... I went with a 12\" slider instead... (my reason for selling it) So if you need a chopsaw and are finding out how much they really cost this is the deal for you! It has a 15-amp motor on it!! Blade, extension guides, dust bad... its all there in the unopened box! Call anytime 598-0088 with any ?s Thanks, Mike D.