<< All boise Classifieds 		boise, arch/engineering

 Goto Image view
Add to Favorites Facebook MySpace Twitter Print
Title Location Compensation Date/Time
Project Manager (Billings, Montana) Billings, Montana With Experience 2009-07-14 3:36PM
Firm providing Construction Management (Owner’s Representative) services to the federal government and other owners is seeking a Project Manager qualified to manage a federal building project in Billings, Montana. Candidates experience must include: - Management of projects with a construction budget of at least $50 million - Management of new construction project- Management of federal building projects - A four year degree in Architecture, Engineering or Construction Management- Strong written and oral communication skills with proven project management ability - 15 years minimum project management experience - Experience with Green Building (LEED, etc.)Candidates will receive preferable consideration if they have: - Certification as a Professional Engineer (PE) or Registered Architect (RA) in Montana- Managed Courthouse, Border Station and/or Government Office Building Projects Please include a copy of your resume and relevant projects in your response. Location: Billings, Montana Compensation: With ExperiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Quality Assurance Manager (Pocatello, Idaho) Pocatello, Idaho $80,000 to $110,000 2009-07-14 6:50AM
FOOD MANUFACTURING COMPANY - HIGH GROWTH Prevent any infestation and or bacterial contamination of the process or the products. Constant emphasis must be placed on cost reduction, training of employees, and subordinates, the evaluation and updating of all SOPs and procedures relating to equipment cleaning functions. Quality Assurance is accomplished through Auditing, Training, Communications, and taking an active role in Quality programs to enhance the Process and Finished Product. Advise and take a proactive management role in HACCP, SSOPs, and Food Safety. Assure the company that the process is within USDA/FDA/State requirements and compliance, and to serve as an interface with any Federal / State agency, and inspectors during routine inspections. Assure the company that products produced are within specifications, and to work with Corporate Quality to establish, review, update procedures as the process or products change throughout the operation. Auditing and training on a continual basis and specific programs for certification of employees to assure quality aspects in the operation conduct quality awareness. To assure the cleanliness of the equipment, factory and grounds to meet all Company, Federal, and State requirements. Take corrective action to different types of problems that may be encountered to detect the root cause of the problem. Make recommendation for correction and total elimination by communications, maintenance of uniformity with in the department, and installing quality awareness attitude with all employees to do it right the first time. Develop the Department Operating Budget and establish goals. Participation as a member of the Factory Staff in developing plant wide programs and goals. Assure the Company that the process is within USDA/FDA/State Requirements and compliance, and to serve as an interface with any Federal/State Agency, and inspectors during routine inspections. Escort inspectors from outside agencies through the Factory, report on their findings, and follow through for corrections in a timely manner. To keep an open line of communication with all personnel during stressful situations and involve other departments on needed basis. Ability to work flexible schedule including days, afternoons, midnights, and overtime. Inspects products and equipment for conformity to Federal, State, and Local Sanitation laws and Company standards. Prevent infestation and bacterial contamination through evaluation and updating of Standard Operating Procedures. Required to maintain a capital and operational budget. Directs cleaning of equipment and work areas for all shifts and maintains inventory of supplies to complete said tasks. Conducts chemical safety training for all within the department, proper use of chemicals to avoid accidents. Inspects premises for unsanitary practices and conditions by conducting audits. Confers with management and production personnel on sanitation problems, and recommends changes in equipment, plant layout, lighting, ventilation, or work practices to improve sanitation standards and purity of product. Compiles required reports regarding regular inspections, sanitation violations, and steps taken to resolve deficiencies. The incumbent must have a good knowledge of Food Manufacturing Practices, and the ability to make sound decisions, capable of communicating and reporting functions both verbal and written, and a personality to create a team attitude. The incumbent must possess a BS degree in Food Science, or Food Nutrition, or a related field. The incumbent ideally would possess a background in Microbiology, Chemistry, as well as Sanitation regulations. Location: Pocatello, Idaho Compensation: $80,000 to $110,000Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Asphalt Paving Field Professional (Boise, Idaho) Boise, Idaho Dependent Upon Experience 2009-06-21 10:30PM
Please send resume and cover letter to hr@stratageotech.com or fax information to (208) 376-8201 Attn: Human ResourcesBelow is an example of typical position duties, preferred certifications, required skills and abilities and necessary minimum education requirements. We will consider training if the necessary skills, abilities and education requirements have been met. PREFERRED CERTIFICATIONS National Institute for Certification of Engineering Technologies (NICET)Western Alliance for Quality Transportation Construction (WAQTC)International Code Council (ICC)American Concrete Institute (ACI)American Welding Society (AWS)Radiation Safety – Nuclear DensometerTYPICAL FIELD PROFESSIONAL DUTIES (The following is used as a representative description and is not restrictive as to the duties required.)Perform field and laboratory testing of various construction materials including soil, aggregate, concrete, and asphaltAssist with project management duties as directed by the project manager in the areas of budget review, services coordination, staffing, client communication, and reporting Perform construction materials testing in accordance with the project specificationsCalibrate and maintain field and laboratory equipmentMaintain equipment and vehicleUse of various types of testing equipmentArrive at job site and report results in a timely, accurate mannerCommunicate daily with supervisors and co-workersMINIMUM SKILLS AND ABILITIES Oral and Written CommunicationAbility to read and interpret documents such as safety rules, operating and maintenance instruction, testing procedures, and project specifications. Ability to write reports and correspondence legibly, accurately and professionally. Employee must be able to communicate effectively with clients, contractor, supervisors and co-workers.Mathematical SkillsAbility to calculate test results in accordance with test procedures.Reasoning AbilityAbility to apply reasonable judgment and understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several variables in standardized situations.Physical DemandsWhile performing the duties of this job, the employee must regularly lift and/or move 75 pounds or more. Individual must work in adverse weather conditions, including extreme hot and cold temperatures. During peak construction season, long hours and weekends are to be expected.MINIMUM EDUCATION REQUIREMENTS (AT THE TIME OF APPLICATION.)High school diploma or the equivalentValid driver’s licenses with an acceptable driving record.Basic use of personal computerADDITIONAL REQUIREMENTSOut of town travel when project work requires Working overtime hours, weekends, and some holidaysStrive for efficiency Location: Boise, Idaho Compensation: Dependent Upon ExperiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Design Engineer, Electronic Engineering (Meridian, ID) Meridian, ID DOE 2009-06-16 5:16PM
Design Engineer, Electronics EngineeringPKG is seeking career-minded, motivated leaders to join our engineering team. EE applicants shall possess strong skills in systems design and project management.Primary Duties and Responsibilities:· Work within an NPI design group, typically paired with a mechanical design engineer to design and develop innovative user interface solutions for PKGs internal and external customers.· Designs and modifies analog and digital hardware circuits for embedded control applications using schematic capture CAD software programs.· Designs and modifies Printed Circuit Board (PCB) layouts using PCB layout CAD software programs.· Designs, writes, and modifies firmware for embedded control applications using C and/or assembly computer languages.Required Qualifications: · B.S. in Software or Electronic Engineering.· At least five (5) years of experience in the design and maintenance of embedded control hardware and firmware. Prefer experience and involvement in all facets and phases of product development from inception to production, and obsolescence.· Experience in the design and manufacture of electronic assemblies and their application to consumer and/or OEM products.· Experience and skills with the following components and systems:o Micro-controllers (Microchip PIC and Cypress PSOC)o Sensors and transducers (temperature, pressure, etc.)o Keypads (membrane, discrete, matrices, resistive, etc.)o Analog-to-digital conversiono Displays (LED, LCD, VFD, 7-segment, alphanumeric, graphical, etc.)o Peripheral drivers (indicators, relays, backlighting, etc.)o Power supplies and batteries· Experience with the following communications protocols:o USB, USB wirelesso RS232, RS484o CANo I(2)Co SPIo Ethernet· Experience with the following design tools, programmers, and debuggers:o MPLABo PSOC Designero Microchip ICD2o Cypress MiniProg· Required software design experience: C, Assembly. Good to know: C++, C#, Java, VB, HTML, XML, JavaScript, Visual Studio, VHDL, Verilog, Databases.· Experience with the following CAD and hardware analysis tools preferred:o OrCADo AutoCADo SolidWorkso Oscilloscopes, multi-meters, USB protocol analyzers, logic analyzers· Familiarity with requirements of safety agencies (UL, CSA, CE, etc.). Location: Meridian, ID Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
COMMERCIAL FENCE ESTIMATOR (BOISE) BOISE DOE 2009-06-15 11:13AM
Commercial Fence Estimator Needed-We are accepting applications and resumes for a Commercial Fencing Estimator. This position requires an individual who has a record of success in the fencing business and someone who is looking to join a company that prides themselves on their reputation of quality and professionalism.. The person we are looking for needs to have a good knowledge of the Commercial Fencing Business, as well as bidding procedures. Also, they must be proficient in utilizing on-line search tools and plan rooms. The individual will need to be familiar with blue-prints, take-offs, specifications (ASTM, ISPWC, Etc.), preparing and submitting shop drawings, as-builds, and submittals/transmittals.The person must be organized, highly motivated, and willing to work in a very high paced, competitive market. They must be willing to work under the pressure of a deadline.-5 years minimum experience-Ability to read blue-prints-Ability to accurately do take-offs-Must know the Commercial Fencing (security, high-way, etc.)-Must be detail oriented -Must be able to communicate effectively- verbal/written-Must be skilled in project management-Must be able to work in an intense, high paced work environment-Residential fencing sales experience a plusCompetitive Wages- Depends on Experience. Medical/Dentalpossible commissionEEO Location: BOISE Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Construction Manager or Project Manager (All U.S.) All U.S. DOe 2009-06-12 7:26PM
An established engineering company is looking for an experienced Construction Manager or Project Manager with 5+ years of experience working on government projects. Experience with renovations and repairs and ground up construction as well as familiarity with historical facilities, special facilities (e.g. courthouse), federal government facilities, etc. is a plus. CMAA or PMI certifications is a must. Send your resume to mail@bce-ak.com or fax 907-272-5214. Location: All U.S. Compensation: DOe This is a contract job.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Department Manager - CMT (Idaho) Idaho Based Upon Experience 2009-06-11 1:41PM
Position Title: Construction Material Testing & Inspection ManagerLocation: IdahoThe following is used as a representative description and is not restrictive as to the duties required. Project and Staff Coordination/Management:Recruit, train and retain high quality technical staff.Supervise, direct and administer staff to accomplish project related goals in a service orientated and professional manner.Coordinate staff to be commensurate to the project and client needs, thus reducing STRATA’s liability.Maintain an efficient workflow between laboratory, field, engineering and administrative personnel to fulfill client and project schedules and budgets.Provide and support a professional atmosphere where communication between staff members reduces errors and establishes training opportunities and personal responsibility.Manage all aspects of testing projects from project procurement, financial responsibility, employee applications, client interaction, and project solutions.Technical: Perform, direct and supervise engineering and construction material testing fieldwork as necessary. This may include: traveling to other regional offices, carrying specimens (i.e. heavy bags of soil/rock samples, concrete cylinders, etc.), performing laboratory and field testing of samples and observing and logging test pits and borings.Work with appropriately registered professional engineers to interpret subsurface data and incorporate subsurface conditions into project analyses and construction recommendations.Communicate accurately and timely, both written and verbally, with clients, co-workers and engineering staff.Perform material testing calculations in accordance with the test procedures for asphalt, steel, concrete, fireproofing, soil and other construction materials. Prepare and review necessary field observation and laboratory test reports in a liability conscientious manner consistent with STRATA’s quality systems and client expectations.Generate proposals and reports commensurate with industry standards, client expectations and STRATA’s standard of service and care. Facilitate review by a STRATA principal/senior engineer with the appropriate engineering or testing experience.Establish and coordinate appropriate laboratory testing to meet the field conditions and project needs.Communicate technical information verbally, electronically, and in final report or letter form in the approved format.Project Management:Develop thorough and detailed project scopes and budgets.Manage project budgets and schedules to be efficient and profitable.Maintain client communications over the duration of the projects, during procurement and project follow-up including collection of accounts due. Be responsible for project setup, coordinating employees and subcontractors, and exploration programs.Maintain the highest level of client service and professionalism throughout projects and your staff.Business Development:Be responsible for the financial objectives of the department commensurate to the corporate goals for revenue, profit, and growth. These objectives and goals will be established through the annual budgeting process, which will require involvement from the Area Manager and corporate officers.Expand, maintain and take ownership in developing our client base in testing, inspection, engineering, and environmental services.Annually present to the Area Manager and/or Board of Directors your business objectives and marketing plan to accomplish those objectives. Identify and pursue new markets in association with the corporate and office goals.Maintain active membership in at least one professional organization such as ACI, ICC, ASFE, etc. .Prepare and present statements of qualifications or technical presentations for project procurement and attend marketing meetings with clients and local, federal or state officials.Risk Management:Use sound testing, inspection and business practices and procedures to help reduce STRATA’s and our client’s risk. Engineering and material testing standards of care are to be utilized at all times.Develop risk management skills by studying materials and attending project management seminars. STRATA will provide the study materials and opportunity to attend the seminars. Study materials will generally be prepared by the American Society of Foundation Engineers (ASFE). Internal project manager seminars are typically held annually at one of the STRATA offices.Strictly adhere to STRATA’s loss prevention policies including, but not limited to: maintaining the geotechnical and material testing standards of practice, adherence to STRATA’s Quality Systems Manual (QSM), following internal report review protocol, proactive engagement of problems with innovative solutions, thorough client discussion regarding risks and cost to benefit ratios, and applying ASFE, Terra and Fundamentals of Professional Practice (FOPP) concepts.Financial Management:Develop monthly and annual business plans to successfully accomplish corporate and regional objectives.Ability to read and interpret monthly and quarterly financial reports and to make necessary office, department and employee changes to facilitate financial success. Ability to assess manpower requirements and make adjustments to achieve office objectives. Be accountable to the Area Manager and Board of Directors for your department’s performance.Ability to apply accounting principles and practices to achieve project, division and office profit goals through adequate billing and budget management.Ability to prepare annual material testing and inspection budgets and monitor the budgets monthly.Ability to analyze and prepare investment proposals for new office or corporate endeavors that will convey the cost to benefit ratio and time value of money.Skills and Abilities (These are considered to be the minimum requirements necessary to begin performing the required work).Work independently and as a team member in a collaborative cultureEffective technical writing and dictationEffective verbal and written communicationProven situational communication skills in being able to coach people having varied skills and knowledgeAbility to perform technical research to solve unique problemsDevelop and implement methods of problem solvingDevelop and analyze alternatives to projectsAccurate, in-detail and presentation in all calculations, reports, etc.Meet accepted deadlines through effective planning and organization skills; ability to multi-task and remain flexible with adjusting prioritiesComplete tasks within proposed budgets and timeframesComputer literate in Microsoft Office Suite applications (Outlook, Word, Excel, etc.) Competent math skills to solve geological/civil engineering and testing problems.Ability to calculate test results in accordance with test procedures.Focused work patterns with appropriate management review procedurePhysical demands may include: Climbing into test pits, hiking on steep mountainous terrain, carrying heavy soil/rock samples, carrying equipment such as: nuclear density meter, wheel barrel with concrete, etc. All of the above may include lifting and carrying items in excess of 75 pounds. Minimum Requirements (At the time of employment).Posses and maintain current appropriate CMT certifications (ICC, ACI, AWS, ASNT, WAQTC, NICET)Radiation Safety Radiation Safety Officer Training Certification Valid driver’s license with an acceptable driving record Location: Idaho Compensation: Based Upon ExperiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Sr. Quality Engineer (Boise) Boise Competitive 2009-06-11 1:21PM
ITradeNetwork, Inc. Solutions is seeking a Quality Assurance Engineer in our Boise office.The candidate must be self-directed, have a technical background, have strong communication skills, and proven ability to follow through on projects and tasks. Responsibilities:• Test the requirement document and provide feedback to product owner• Deliver work estimates related to testing, quality assurance and deployment activities• Document an inventory of Requirements, functionality and software components• Develop testing requirements• Develop, document and execute test plans• Develop acceptance tests and setup of test data• Responsible for quality risk analysis• Identify defects within specialized product application or service• Diagnose and document issues and determine steps to reproduce• Generate bug reports• Track and Validate defects resolution• Communicate testing activities and status to stakeholders in oral and written format• Track and report quality assurance metrics and test coverage• Review release notes documentation before it is sent to customers• Demonstrate working software in a Walkthrough to Internal customers• Deliver bug-free software to testing, customer visible and Production environments• Verify correct software deployment to every environment• Troubleshooting and characterization of escalated Production support issues• Monitor logs and alertsKnowledge & Experience Requirements:• Degree in computer science, computer information systems or equivalent experience• Demonstrated proficiency with modern software quality methodologies• 4+ years experience in software quality assurance• Working knowledge of SQL and web based programming languages• Demonstrated experience writing test plans, test requirements and test cases• Knowledge of automated testing methods. Mercury QTP preferred• Solid expertise in internet protocols with a complete, hands-on understanding of Microsoft Internet technologies and tools (Profiler, Fiddler and Internet Protocols)• Demonstrated experience using application lifecycle management tools (HP/Mercury Quality Center)• Effectiveness in oral and written communication• Problem-solving and trouble-shooting skillsITN is a fast growing, progressive company. We seek talented professionals and provide the opportunity to participate in our growth. We are an equal-opportunity employer and offer a highly competitive and comprehensive benefits package. Location: Boise Compensation: CompetitivePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Sr. Software Developer (Boise) Boise Competitive 2009-06-11 1:21PM
iTradeNetwork, Inc. with offices in Boise has an open position for a Senior Software Developer with the following skills: B.A./B.S. degree in computer science or equivalent experienceJOB SUMMARYResponsible for the delivery of software products based on existing architecture and standard software practices.Software Solutions Development & Delivery Using latest technology, create reusable and quality programs according to ITradeNetwork established standards and practices* Design and code ITradeNetwork*s applications* Use development methodologies based on Test Driven Development and Agile principles* Produce quality and well-documented code according to scheduled deadlines* Translate business requirements into an effective technical design in accordance with the ITradeNetwork architecture and platform* Assists Development Manager and/or Team Leads to maintain communication between software development team and other departments* Assists development manager with the development of timelines and prioritization of work within the Software Development teamResearch, Development & Training Evaluate new technologies to impact ITradeNetwork line of business applications. Stay up to date on competing and complementary technologies * Characterize and document the system behavior of software* Develop research and development goals to include participation in conferences, seminars, blogs and e-learning* Conducts internet research and subscribes to periodicals to stay current on applicable technology* Under the direction of Software Development Manager and/or Team Lead, provides leadership, coaching and development to team as opportunities ariseKnowledge & Experience Requirements:(Minimum qualifications required to perform the job)* B.A./B.S. degree in computer science or equivalent experience * 5+ years professional software development experience* 3+ years professional experience in the web application development* 3+ years professional experience with Microsoft technologies* 2+ years professional experience with Microsoft .Net (C# and 2.0 experience preferred)* 3+ years professional experience with ASP.NET(1.1 or 2.0)* 2+ years professional experience with XML technologies* Knowledge of latest Microsoft technologies* Knowledge of design patterns, unit testing, refactoring (Red, Green, Refactor)* Knowledge of Agile, Test Driven Development and Continuous Integration principles* Knowledge of the following: Microsoft application blocks, ORM and Application Frameworks, SOA standards, Workflow Frameworks, W3C protocols, etc.* Knowledge of J2EE technologies preferred * Knowledge of webservice technologies like WSE 3.0 and WSF* Demonstrated knowledge of client server and internet systems architectures* Proven understanding of benefits of the various design methodologies and object oriented environmentsMust have unrestricted ability to work in the United States.Email resumes to: hr@itradenetwork.com. No phone calls please. Location: Boise Compensation: CompetitivePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Engineeering Project Manager (Boise, ID) Boise, ID DOE 2009-06-11 10:05AM
Position Overview: The Engineering Department Project Manager’s primary focus will be the initiation, planning, implementation and management of programs for support of day-to-day department administration and product development activities within the Engineering Department. The goal of this position, and these programs, is to ensure that R&D and day-to-day projects are effectively and efficiently planned, managed and communicated with respect to costs, resource and time allocation, scheduling, quality control and regulatory and safety requirements. This position requires the exercise of independent judgment and discretion with regard to planning, budgeting, implementing and managing both the strategic and tactical elements of the engineering department administration and project management. Position-specific Duties & Responsibilities:• Recommend, develop, implement and manage department and project management procedures and processes upon evaluation of current tools in place. • Work with the Technical Director to schedule, budget and plan department and personnel. • Ensure that all R&D projects and department programs are effectively managed to meet established objectives within accurately identified and authorized resource, cost and time allocation. • Create and monitor project budgets, resource planning, and adherence to deadlines for assigned projects. • Ensure that project progress is adequately monitored by management, through adequate, accurate and timely communication.• Work with Project Lead to ensure that adequate testing is scheduled and conducted in order to achieve all necessary legal, regulatory, quality and safety requirements are met.• Coordinate and communicate market entry requirements pertaining to schedule, international regulations, product standards and international retail distribution. • Serve as point person of day-to-day project management for both internal customers such as executive management, sales and marketing departments, or external customers such as distributors and agencies in international markets.• Provide project status, reporting and communication, including team, executive and cross team reporting.• Ensure tracking and analysis for effective use of resources and drive best practices. Qualifications:Educational Requirement: • BA or BS in Business, Engineering, Industrial Technology, related discipline or an equivalent combination of education and work experience.Required Skills: • Experience with the following computer skills and specific programs including but not limited to Accounting, ERP and CRM software: Microsoft Word, PowerPoint, Excel, Project and Visio.• Experience planning, budgeting, implementing and managing both the strategic and tactical elements of technology department administration and project management. • Proficiency in SolidWorks, Microsoft Access and a plus.• Four years supervisory and project management experience.• Travel may be required (valid passport required).Physical Requirements:• Ability to use computer mouse and keyboard.• Ability to sit or stand for long periods of time.• Frequent use of written and verbal communication skills.• Repetitive use of hands required.• Moving/lifting of 25-50 pounds on occasion.• Color vision required to review color designs and concepts and judge suitability.• Moderate exposure to noise.• Significant stooping, kneeling and/or crouching.BOB Trailers, Inc. performs criminal background checks on all applicants after a job offer has been made, but before beginning employment. If youre interested in being considered for this position, a resume and BOB Job Application can be e-mailed to jobs@bobgear.com or faxed to 208-350-7580.A BOB employment application with salary history must be completed in order to be considered for this position. Go to www.bobgear.com/bobjobs to download an application. Location: Boise, ID Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Engineer/Draftsman (Boise Idaho) Boise Idaho DOE 2009-06-11 8:33AM
Seeking Engineer/Draftsman for full time position. Duties include Electrical schematic generation, profile drawings for electrical, electronic and control systems. Facility systems installation layouts for remodels and new contruction. Mechanical layouts of food processing, pumping systems. Structural and sheet metal fabrication design, generation of accurate flat pattern projections essential and knowledge of weld symbols essential. Position requires creation and documentation of bills of materal and associated aggregate reports for procurement and manufacturing. General drawing maintenance and organization. Multitasking, proficiency with plotters, printers, ability to prioritize, communicate and schedule tasks. Must have 5 years experience in Solid Works. Location: Boise Idaho Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Lead Mechanical Engineer (Boise) Boise $100k+ DOE 2009-06-02 2:48PM
ENSCICON Corporation a leading consulting firm to the companies among the ENR 500(tm) is seeking a Lead Mechanical Engineer with Combined Cycle Power Plant experience. Qualified candidates will possess a BSME from an accredited university and 5+ years as a Lead Mechanical Engineer, preferably at a Combined Cycle plant. A P.E. is preferred but not required.Interested parties please reply with updated resume and professional references. Location: Boise Compensation: $100k+ DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Hydro Project Manger PE (Boise ) Boise 100-135 with bonus and full benefits 2009-05-28 4:48PM
Enscicon Corporation is the EP&C industries leading recruitment and staffing firm. Currently we are conducting a confidential search for a Hydro Project Manager with 10 plus years of experience in the power generation industry. Our client is one of the largest and most successful international power generation firms. This exciting opportunity will provide the right candidate with exposure to major hydroelectric generation projects with full scope cradle to grave business and project management experience. We prefer to talk with candidates who have a Mechanical or Electrical Engineering degree and a P.E or P. Eng with solid field focused experience and an understanding of business fundamentals. Responsibilities include: conducting initial investigations, preparing financial justification for projects with detailed cost/benefit and schedule scenarios, negotiating and managing consultants for design work, conducting peer reviews, developing scope of work, managing work crews (including chairing site meetings), tracking schedules, meeting technical standards, overseeing health and safety compliance and environmental management. Final P&L success of project. Experience in managing large scale turbine replacement and turbine refurbishment projects throughout North America Please send your expression of interest to William Smith - all applications are held in strict confidence Location: Boise Compensation: 100-135 with bonus and full benefits Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Systems Engineer (Salt Lake City, Utah) Salt Lake City, Utah 80-95K based on experience 2009-05-28 10:25AM
OVERVIEWProduct teams for the clients product typically consist of an Electrical Engineer, a Mechanical Engineer, a Software Engineer, and a Systems Engineer. The Systems Engineer needs to be a generalist, but can come from any of the 3 backgrounds (ME, EE, or SE). REQUIREDBS in EE, ME, CS, or similar5+ years experience as a generalist - ie, must have experience working closely with the other 2 types in a group, to tie everything together.Ability to make bright people gel - acts as the informal project lead in the teamStrong analytical skillsIf ME - needs to have 3d Modelling experienceIf SW Eng - needs to have experience with scientific, data-driven development BONUSInline Pipe Inspection experience DESIREDMS Degree SOFT SKILLSAble to work largely unsupervisedAbility to work in a collaborative environment with other engineersCan either work quite a bit with clients or not, depending on preferenceSomeone who likes to own the projectBright, flexible, and able to grasp ideas quickly OFFICIAL JOB DESCRIPTIONSummary of Systems Engineer: We are seeking a talented multi-disciplinary engineer to join our inline inspection systems group, developing new technologies used to inspect pipeline systems worldwide. Primary Responsibilities: - Conceptualizes and designs In-Line Inspection tools. - Provides technical support to world-wide In-Line Inspection sales, manufacturing, and customer service groups regarding product and service applications, support, and complaint resolution. - Addresses technical problems by inventing solutions or changing system design. - Improves technical knowledge of department through on the job application and leverage of customer specific engineered solutions, participation in professional and industry trade organizations, reviewing technical papers/literature and attending appropriate seminars and workshops with the intent of applying the latest technology to both existing and new products. - Reviews work of self and others to ensure systems are designed with minimum complexity and maximum result. Ideal Candidates will Possess: - BS in an engineering field and at least 5 years experience. - Strong analytical and communication skills. - Ability to collaborate with many different technical disciplines. - Multidisciplinary design skills, including: o Mechanical design and analysis; SolidWorks experience is a plus. o Familiarity with electronic systems, including sensors and data acquisition. o Experience programming for data analysis purposes. MATLAB, Labview, or C/C++ familiarity is a plus. Preference will be given to candidates with experience in: - Permanent magnet design and analysis - Ultrasonic inspection techniques - Nondestructive testing - Inertial systems Location: Salt Lake City, Utah Compensation: 80-95K based on experiencePrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
HVAC/Plumbing Mechanical Engineer or Designer (Reno,NV) Reno,NV Wages and benefits are depending on experience. 2009-05-27 12:39PM
HVAC/Plumbing Mechanical Engineer or Designer Mechanical Designer with a well rounded understanding of mechanical systems, required calculations, governing codes and mechanical consulting services for our Reno, NV office. Our company is growing and we are looking for experienced and motivated team members interested in advancing the company and working on interesting projects. This position requires residency in Reno NV .Types of system designs we get involved with:*** Do not submit if your resume does not show HVAC and Plumbing design experience***• Heating, ventilating, and air conditioning (HVAC) for institutional, commercial, and industrial applications • Central plants (boilers/chillers) • We are looking for an experienced HVAC/Plumbing Professional Engineer or Co-generation systems • Steam heating and process • Underground utilities and utility distribution • Vehicle and workshop exhaust source capture extraction systems • Fire protection performance designs including automatic fire sprinkler systems, aqueous film forming foam (AFFF) fire suppression and clean-agent dry fire suppression • Plumbing systems including fuels (gaseous and liquid), domestic water, and drain/waste/vent • Special waste handling--sand-and-oil interceptors and waste oil collection and storage • Type I and Type II kitchen hood ventilation for commercial applications • Backflow prevention assemblies • Medical gases • Air tank breathing-air filling stations • Compressed air systems • Process piping • Underground and above grade fuel storage tanks, dispensing facilities and appurtenances • Generator fueling and ventilation • Automatic hand-pump assemblies for emergency generator systems • Hydronic snowmelt for walkways, driveways and building entrances • Direct Digital Control (DDC) Systems • Energy management (building energy control) • Energy audits and efficiency evaluations Minimum Experience Requirements: • Mechanical HVAC and plumbing system designer • Bachelor of Science in Mechanical Engineering Preferred • Project management experience • Heat Load Calculations and Energy Analysis • Solid understanding of governing mechanical, plumbing and energy codes • Specification and cost estimating experience • Construction Administration/Support Experience Computer Experience Requirements:• AutoCad 2009 proficiency • Revit MEP preferred • Trace 700 Load and Energy Analysis • MS Office • MS Excel Please submit your resume via email to: lori@dinter.com or call for questions 775-682-4620Wages and benefits are depending on experience.http://www.dinter.com/careers_reno.shtml Location: Reno,NV Compensation: Wages and benefits are depending on experience. OK to highlight this job opening for persons with disabilitiesPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.
Mechanical Engineer (Salt Lake City, UT) Salt Lake City, UT DOE 2009-05-18 11:31AM
urrently seeking a mechanical engineer to join a growing firm in SLC, in the area of Energy Efficiency and Energy Management.Specific responsibilities will include: performing energy engineering services for clients, reviewing energy efficiency, recommissioning projects, on-site field inspections, installing field monitoring equipment, conducting energy audits, performing comprehensive energy modeling, and performing other related tasks.Experience & EducationBachelors or masters degree in mechanical engineeringAt least 5 to 7 years building system design experience including HVAC, controls, and pipingProfessional engineer license strongly preferred (or be on track to obtain a license)Client contact and relationship experienceStrong verbal and written communications skills, including report and presentation preparationExcellent interpersonal and analytical skillsExperience with Department of Energy modeling tools such as eQuest DOE 2.2 is preferredFamiliarity with ASHRAE 90.1 2004 and 2007 and IECC 2006 Location: Salt Lake City, UT Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.
Chemical Engineer – Multiple Openings (Missoula, MT) Missoula, MT $60K to mid-$100K 2009-01-23 4:23PM
Company based in Missoula, has several Chemical Engineering positions open ranging from Entry-level to Senior-level.Title: Chemical Engineers (Process, R&D, Project Manager-Chemical)Job Description: Designing chemical processes, from PFD level through detailing of equipment. Developing PFDs, P&IDs and Process Specifications. Required Skills: BS in Chemical Engineering or related field is a plus. Experience with Process Simulation tools.Comp: $60K to mid-$100KLocation: Missoula, MTContact 702-769-8739Or send Resume & Contact info to email below. Location: Missoula, MT Compensation: $60K to mid-$100KPrincipals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.PostingID: 1005022344
Several Mechanical Engineer Opps. (Missoula, MT) Missoula, MT Depends on experience, typically above market. 2009-01-23 3:19PM
Title: Mechanical EngineerJob Description: Develop Optimize & Implement new equipment and processes, coordinate and work multiple disciplines and activities.Required Skills: Degree in Mechanical Engineering. B.S.M.E. or P.E. preferred. Knowledge of Mechanical Theories, Design Evaluation Techniques, and Design Principles. 3D Modeling Experience (Solid Works or PRO E Wildfire). MRP System Experience. Strong Communication, Presentation and Interaction skills. Knowledge of ASME Boiler and Pressure Vessel Code. Experience with Steel Fabrication.Comp: Depends on experience, typically above market.Location: Missoula, MTContact 702-769-8739Or send Resume & Contact info to email below. Location: Missoula, MT Compensation: Depends on experience, typically above market.Principals only. Recruiters, please dont contact this job poster.Phone calls about this job are ok.Please do not contact job poster about other services, products or commercial interests.PostingID: 1004933799
ELECTRICAL ENGINEER - RENEWABLE ENERGY (CENTRAL OREGON) CENTRAL OREGON DOE 2009-01-16 3:00PM
FANTASTIC OPPORTUNITY FOR AN ESTABLISHED, SUCCESSFUL, AND GROWING COMPANY IN BEND, OREGONOverview: Performs Electrical Design & Manufacturing / Testing support for Power Systems. Under minimal supervision the ideal candidate will coordinate with project leaders and colleagues to determine the need for and design / implement electrical components and subsystems systems that satisfy the industry’s safety and performance standards. In addition to design this position includes significant hands on support and trouble shooting of wiring systems and sensors. Prototyping /Breadboarding skills with discrete components and microprocessors are considered a plus. This position will involve working with high energy electrical devices such as batteries or utility connections.Responsibilities:• Prepare prototypes and component assemblies and systems that meet establishedspecifications• Design and build component test fixtures and test plans• Conduct and report on experiments and tests• Provide first line of engineering support for manufacturing assembly and field service• Troubleshoot and repair circuit boards to the component level• Support and interface with agency testing• Design and layout simple PCBA’s• Research component technologies and trade offsRequired Qualifications: • BS Degree in Electrical Engineering. Associates Degree considered with significantand relevant experience• 6+ years experience in product development or manufacturing• Ability to trouble-shoot analog and digital electronics• Experience with light programming in C or assembly• Knowledge of proper electrical manufacturing techniques (soldering, wire layout,terminations, etc)• Knowledge of Capture and Layout packages• High Level of Competence in working with PC’s in an Engineering Environment• Knowledge of Electrical Instrumentation (O-scopes, meters, etc)Desired Qualifications:• Experience with EMC concepts and measurement techniques• Power Supply Design• ESD Handling Methods• New Product Introduction Location: CENTRAL OREGON Compensation: DOEPrincipals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 995661408
Electrical/Computer Engineer (Meridian, Idaho) Meridian, Idaho To be discussed. 2009-01-16 10:16AM
I am a CPA/attorney/entrepreneur with experience in raising capital and company start-ups. I am looking for an electrical/computer engineer who is knowledgeable in lighting and LED applications to assist me in designing and developing a retail consumer product. This product has the potential to be extremely lucrative with national and international sales appeal. The qualified applicant must be a serious, motivated, and success driven individual who is ready to commit to what is intended to be the last job they will ever have. If you are that individual, send me your resume if you have one or simply tell me about yourself and your experience. I will contact you for an appointment. “The greatest risk is not taking one.” - Unknown Location: Meridian, Idaho Compensation: To be discussed. Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 995215105
Google schetchUp (Nampa/Boise) Nampa/Boise TBD 2009-01-16 7:32AM
Im looking for someone proficient with Google SchetchUp. Need to take 3D Revit files and work some rendering magic. I will need to see samples of work. Im in Nampa. Location: Nampa/Boise Compensation: TBD This is a part-time job.Principals only. Recruiters, please dont contact this job poster.Please, no phone calls about this job!Please do not contact job poster about other services, products or commercial interests.PostingID: 994989155