I have 2 compressors so this one needs to go. I bought it from D&B for $1200 3 years ago but only used it a few times. If you are interested please call me. thanks Ron 713-3492 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Rigid 300 pipe threading machine with extra dyes. Recently serviced. Good condition works great. Please call if interested,do not email, too many scammers.$1900 208-249-7013 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Coleman Powermate 1850 Generator used 5 times. Priced at ACE online at $539.00 Perfect Condtion call Mike 208-409-0555http://www.acehardwaresuperstore.com/coleman-powermate-sport-1850-generator-p-17189.html?ref=42COLEMAN POWERMATE 1850 GENERATOR Four-cycle, 3.5HP B&S engine 1850 maximum watts, 1500 running watts 1.3 gallon gas tank 7 hours of run time at 50% load Perfect for tailgating, camping or other outdoor activities Two 120 volt DC outlet provides 15 amps of power, ideal for battery charging and smaller DC devices, equipped with automatic circuit breaker protection 12 volt DC charging cables included Fully enclosed to reduce noise Carry handles on both sides Conveniently located fuel shut-off valve Rubber feet minimize crawling and reduce vibration Spark arrest muffler approved by US Forest Service to help prevent fires Location: Meridianits NOT ok to contact this poster with services or other commercial interests

MUST SELL!! SNOWBLOWER CUB CADET. LOOKS AND RUNS LIKE BRAND NEW! Location: MIDDLETONits NOT ok to contact this poster with services or other commercial interests

I used to repair office machines and this was my tool box.I believe it was the \"Admiral\" model and cost over $100 new, back then.Anyway, its still in pretty good shape and I am selling for $10 bucks.I washed it up a little, but could used a thorough cleaning if using it for professional purposes.First person here gets it.See pictures for detail. Location: Nampa (Amity near Happy Valley)its NOT ok to contact this poster with services or other commercial interests

Tahoe Industries gas powered compressor only used once, 5.5 hp honda motor, 8 gallon air capacity, must sell quick moving out of state and cant take it with us. Chris (208) 271-6042 Location: mccallits NOT ok to contact this poster with services or other commercial interests

This rugged saw from Makita features a cast cylinder, low noise operation, easy maintenance, double air filtration, efficient cold weather operation and high power-to-weight ratio. Saw comes complete with a 20\" bar and chain, allen key, universal wrench, carburetor screwdriver and torx wrench.(Picture is stock, this saw is used, with very little use.) Retail new price is $549.00.FEATURES: * Rugged cast cylinder. * Easy maintenance. * Low noise operation. * Efficient cold weather operation. * High power-to-weight ratio. * Double air filtration.SPECIFICATIONS: * Cylinder displacement: 3.9 cu. in. / 64 cc * Power: 4.7 hp / 3.5 kW * Max RPM: 13,500 * Fuel tank volume: 1.90 pint / 0.89 liter * Oil tank volume: 0.84 pint / 0.40 liter * Weight (powerhead only): 13.6 lbs. * Chain Pitch: 3/8\", .050 * Recommended Bar lengths: 16\" - 24\" Location: NW Boiseits NOT ok to contact this poster with services or other commercial interests

Only used a few times, less than 5 hours use. Retails for $200Works perfectly, Im just a female that lives alone and isnt strong enough to pull start itMake: Yard MachinesEngine: 31ccHead: 17\"Model: 2800MAsking $95.00 for it.Call Patti at 344-1673 if interestedThanks for looking! Location: Boiseits NOT ok to contact this poster with services or other commercial interests

Genie Lift GL-4 STDLike New- Excellent Condition- Used Very littleThese are a few of the thousands of applications:Shipping/receiving Transporting appliances Lifting heavy material to or from shelves Moving office equipment Installing ceiling/wall appliances Record storage and retrieval HVAC installation and repair Lifting equipment/computer products in retail stores Handling cement bags Lifting and moving automotive parts Purchased new at Brown Rental for $2,764Still under warrantyhttp://www.genielift.com$1,500 cash Location: Meridianits NOT ok to contact this poster with services or other commercial interests

My father-in-law got me this Bosch 1677WD circular saw as payment for building out his basement. I havent used it much since. Runs great and is clean and in great shape. Mark - 559-2097 Location: Meridian - Locust Grove / Victoryits NOT ok to contact this poster with services or other commercial interests

Drill/Driver Kawasaki 19.2 volt. Two batteries and one charger like new condition. Drill/Driver DOES NOT WORK has broken gear see picture.reply to CL Location: Meridianits NOT ok to contact this poster with services or other commercial interests

This is a Stihl 390 with a 28 inch bar. It has been used for 2 full seasons in Mccall, it is in great shape and cuts like a champ. If you are interested please call Adam @ 634-8088 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

6 KW Colman Generator with 3 Cil Kabota Diesel , single phase 25-50 amps 1800 RPM max other contact: Steve 208-880-9837 or 208-642-7313 Location: Payette, IDits NOT ok to contact this poster with services or other commercial interests

Honda contractors style air compressor, has twin tanks, single front wheel (wheelbarrow style) 5 hp Emglo pump.other contact info: Steve at 208-880-9837 or 208-642-7313 Location: Payette, IDits NOT ok to contact this poster with services or other commercial interests

Good Bosch 3 amp Nibblers.Can adjust the head to nibble in any direction.In excellent shape but the cord was weathered on the outside sheath and I taped it.If you are familiar with these,you know that they are about $350 - $400 new. Please call and if no answer leave message and well get right back. I dont care for emails $100 cash please 353 1972 Location: se boiseits NOT ok to contact this poster with services or other commercial interests

I have a corded drill without the chuck. This is to small of a drill for anything that I need it for but would be great for the small projects around the house $4.00. Location: Canyon Countyits NOT ok to contact this poster with services or other commercial interests

8\" delta table saw on roll around stand one hp motor80.00 no checks call bill @989 5686 Location: w. boiits NOT ok to contact this poster with services or other commercial interests

NEW PRICE - A 2 foot by 3 foot metal wire rolling cart - MUST SALE - $ 40.00 OBO! - CALL 208-841-0669 or write back. Location: Eagle AREAits NOT ok to contact this poster with services or other commercial interests

Big parts washer with go fast stickers on it. Need room in my garage.approx.36\"x24\"x17\" and stands 38\" from the ground. 371-7197. $100.00. Location: Boiseits NOT ok to contact this poster with services or other commercial interests

About 5 years old, but still New and In Box. Never used. Comes in box with instructions, one disk and guard.Call Bob898-8938 Location: Eagle and Fairviewits NOT ok to contact this poster with services or other commercial interests

Like new. Comes with instructions and case.Call Bob898-8938 Location: Eagle and Fairviewits NOT ok to contact this poster with services or other commercial interests

Set of 3 micrometers. 1, 2, and 3 inches in size. Used, but in like new condition.$15 eachCall Bob898-8938 Location: Eagle and Fairviewits NOT ok to contact this poster with services or other commercial interests

The Model 229 is designed for maintenance and repair applications where 3/32\" to 5/32\" fasteners are used. This lightweight (4.75 pounds), easy-to-use tool provides a production rate of up to 30 fastener installations per minute. $800.00 obo. Call 208-921-9324 Location: BOISEits NOT ok to contact this poster with services or other commercial interests

New paintgun parts DeVillbiss and Sharpe. Comes with everything in the pictures. $300.00 obo. 208-921-9324 Location: BOISEits NOT ok to contact this poster with services or other commercial interests

TCRA 1103 Plus Robotic Instrument Purchased new for $20,000. Well maintained - excellent condition. Comes with basic accessories: batteries, charger, prism, cables, antenna, manual, etc. 208-382-4230 Location: CASCADE, VALLEY COUNTY, IDAHOits NOT ok to contact this poster with services or other commercial interests

For use with paint sprayers. Good condition. Used once. 6ft + handle.$20 Location: Kunaits NOT ok to contact this poster with services or other commercial interests

David White Transit. Recallibrated at last use. Excellent Condition. Protective case, Tripod stand, and collapsible measuring stick. $150 Location: Kunaits NOT ok to contact this poster with services or other commercial interests

Good condition, used Craftsman ban saw. Sturdy stand. Runs good.Adjustable cutting hight: from approx. 0 - 4 in.Adjustable tilting cutting table.$50 Location: Kunaits NOT ok to contact this poster with services or other commercial interests

This ad is for a pair of Provision Pivit ladder jacks. I bought them a few months ago to use around my house and have only used them maybe 2 times. Near new condition, just a little dusty from storage. These go for about $90 each new. Thanks. jstbldit@gmail.comScammers will be reported, and any bogus cashiers checks sent will be given to the police............ Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Used but works well, Wacker upright compactor. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Dust Collector for sale - I purchased new and have lightly used this tool - runs great & in near perfect condition. Purchased for a project, which is now finished & now cleaning out the garage. I will even through in some 2\" pipe & connectors, blast gates. and flexible pipe connectors.Here are the specs:2 horsepower, 120 volt, 60 Hz, 20 amp peak single-phase motor 3450 RPM 4\" intake and 4\" exhaust diameter Four swivel locking casters for portability 1550 CFM air suction capacity Lockable toggle switch CALL 208-867-8137 Location: Eagleits NOT ok to contact this poster with services or other commercial interests

Senco Airfree Finish Gun. comes with 1 batery charger and hard plastic case. The picture shows 2 batteries but only 1 works. If interested please email jstbldit@gmail.com or Location: Nampaits NOT ok to contact this poster with services or other commercial interests

6 month old Dewalt Jig Saw in Mint Condition. Need money asap and have priced it more than half off.830-4042 or e-mail me. Location: Boiseits NOT ok to contact this poster with services or other commercial interests

3/4 ton trailer asking $200.00 OBO call 208-455-9198 Location: Caldwellits NOT ok to contact this poster with services or other commercial interests

I have 3 of these things so 2 must go. I know what they are worth but am forced to sell for 250.00 ea. Call travis 571-3667 or 459-7100its NOT ok to contact this poster with services or other commercial interests

Nice Extra Large Router Table by craftsman 3 1/2ft long......$30.00 Cash....585-4311 Location: Caldwellits NOT ok to contact this poster with services or other commercial interests

Used Echo Chain Saw w/new chain.(15\")....$100.00 Cash.....585-4311 Location: Caldwellits NOT ok to contact this poster with services or other commercial interests

I have a honda generator that runs perfect and quiet. Good condition just a little dirty. Doesnt need anything ready to use. I believe it to be a 1200 watt Im not sure but i can run varies power tools and a small compressor. call patrick at 217 414 6497 and leave a message or call after 4pm 208 832 9854 Location: mountain homeits NOT ok to contact this poster with services or other commercial interests

Dynatec’s Dynamini model # N52GCSI, 120 v, 1800 watt, 3.2cc/rev, gear pump, hopper fed, hot melt glue applicator, with digital programmable controller.Also 12’ of 120v heated hose And Dynatec DG11 hand applicator with axial swivel, & right angle swirl attachment.Manuals, extra glue, toolsIf you have hot melt glue to apply, to lumber, composites, P/E, cardboard, foam, etc…. this is the unit. Will accurately supply hot glue to a spot, bead, a wide patterned swirl, (for sheet lamination). Paid $3200.00 as a demo gun, very little use. Super sale $1900.00 Ph 208-466-0133 Location: S Nampaits NOT ok to contact this poster with services or other commercial interests

This 5 hp three phase air compressor is still in good shape. Just turning the wheel by hand builds immediate air pressure and we dont have any way of wiring it, so we are getting rid of it. We are also willing to take offers. If interested, please call at 541-372-2552. Location: Nyssa Oregonits NOT ok to contact this poster with services or other commercial interests

Call or Text 208.409.4684 Brand New in Box with manuals and 2 Year Warranty registration. MTD Yard Machine 8 ton compact log splitter This compact unit operates in the horizontal position. * Large hardened steel wedge with log cradle * Retractable cylinder and 7” wheels for easy storage and transport * 19” maximum log length * 123cc OHV Engine Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Sear Craftsman Air Compressor 3 hp and 20 gallon tank. Ive owned it for 10+ years and it still works fine. I got a bigger, better, upright model for Fathers Day and dont need this one. If interested, my cell # is 573-7872 or reply via e-mail thru Craigslist. I can deliver it in Nampa area. Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Has some use but still works great. Has all acessories and operators manual. If interested call Robert 989-9921 or email gravesrobert357@yahoo.comHere is a link to Smithys website for detail on the Super Shop http://www.smithy.com/product_home.php?cid=18&scid=19&pid=1003 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

Air-powered Brad Nailer/Stapler comes with carrying case and some nails & staples. Great for small projects or putting up trim-work. Brian 340-3798 Location: Boiseits NOT ok to contact this poster with services or other commercial interests

Pair of electric thermostat-controlled space heaters. Brian 340-3798 Location: Boiseits NOT ok to contact this poster with services or other commercial interests

This is Cornwell tools mini buffer/polisher. only used a couple of times and i found that it was to fast for what I needed. asking 80.00. paid 170.00Email me at imforlauri@hotmail.com. Location: boiseits NOT ok to contact this poster with services or other commercial interests

this is a hitachi pancake air compressor model ec79 6.0 gallon 2.7cfm @90psi max 135psi asking 100.00 only used three times in my garage. paid 170.00Email me at imforlauri@hotmail.com Location: boiseits NOT ok to contact this poster with services or other commercial interests

One 25 Air Hose for $15.00 and One 100 Air Hose for $45.00. Both with quick release ends. Brian 340-3798 Location: Boiseits NOT ok to contact this poster with services or other commercial interests

1937 Gambles Stick Welder 220V, they dont make them like this anymore! Works flawlessly - on high setting will cut through frame rails, you can weld anything - ANYTHING. Comes with approximately 50 ft indoor/outdoor cord to plug into your dryer outlet, extending your reach. Mounted on a heavy-duty 500 lb capacity Magliner aluminum hand truck. Has a 90/10 duty cycle, works like a mule. Trades considered but cash is king. Brian 340-3798 Location: Boiseits NOT ok to contact this poster with services or other commercial interests

Short ladder - 2 steps - for sale. $5 or best offer. Brian 340-3798 Location: Boiseits NOT ok to contact this poster with services or other commercial interests

We have scaffold for sale. There is 7 sets of 5 foot, includes wheels and cross bars, asking $240.00 per set. There is 2 - 6 foot sections with wheels, planks and crossbars, asking $300.00 a set. There is 4 planks for the 5 foot scaffold, asking $60.00 each....If interested please call 353-9595 or email storm3374@yahoo.com ( the pics are just part of what we have ) Location: Nampaits NOT ok to contact this poster with services or other commercial interests

check out our new D.I.Y Stone veneer poly plastic molds. these molds can be bent crushed and abused. they will last you for years to come. Dont waste your money on Heavy rubber!!! too expensive!!!. check out our website http://www.executivehomeandgarden.com/diystoneveneermolds.html . make your own ledge, field, castle , and lime stone for pennies!!!!! Location: wakeforestits NOT ok to contact this poster with services or other commercial interests

DEWALT HEAVY DUTY ROUTER WITH LAMINATE TRIMMER BLADE. USED ONCE. BOX, INSTRUCTIONS, WRENCH INCLUDED. PAID $95.00 NEW PLUS THE TRIMMER BLADE.PLEASE CALL 629-6778, LIMITED INTERNET ACCESS Location: BOISEits NOT ok to contact this poster with services or other commercial interests

7.50 Location: Middletonits NOT ok to contact this poster with services or other commercial interests

$17.00 Location: Middletonits NOT ok to contact this poster with services or other commercial interests

This is a Jet branded, HTC mobile base made in USA. This is a 1 piece welded base with the extension to support saws w/ 50\" fence and table. The bracket on the very end bolts on to allow for height adjustment on extension table legs.Th actual base opening dimension is 21\"x21\" so, your TS base will need to fit WITHIN those dimensions. As long as you are within a few inches it should work fine. Should work with almost any cabinet saw and many contractor style saw depending on your base and leg dimensions. The extension comes out another 41\" or so for table leg support bracket. The total length of the unit is 65\" or thereabouts. Even if you have a shorter fence you could still use this fence to support just a saw or add in an extension table.As you can see in the pic the unit is brand new, the white box has the casters and hardware. Email through CL for more info. Local sale only. Location: Middletonits NOT ok to contact this poster with services or other commercial interests

Central Machinery Jig Saw #35778 this is a clone of the Bosch and is an excellent saw retails for $80 Location: West Treasure Valleyits NOT ok to contact this poster with services or other commercial interests

Jet Premier Xacta Fence II Commercial Rip Fence w/ Micro Adjust. Made in the USA by HTC and branded Jet. Physically the same as the HTC fence which retails at over $350. This is a BIESEMEYER style fence. $95 FIRM for the bare fence (no rails) Email though CL or call (208) 906-3331 Designed for commercial applications, features Micro-Adjustor, quick-change nylon fence faces, tough powder coat finish, and the heavy-gauge steel construction required for industrial use.Exclusive Micro-Adjust feature eliminates the need to \"tap, tap, tap\" the fence into position for the cut. The spring-loaded quick lock lever on the Micro-Adjust feature is fast and simple to use. Dialing in your cut is easy and, more importantly, extremely accurate. Fully adjustable for square, parallelism, and clamping pressure.The second pictures show the router fence attachment accessory. I have that as well for $50 Location: Caldwell/Middletonits NOT ok to contact this poster with services or other commercial interests

Jet DC-1200 JET Dust Collector w/ Bag Kit, 2HP, 1Ph. Great condition . With extra hose and splitter Price $225.00 - OBOContact Mark 208-949-7677 Location: Meridianits NOT ok to contact this poster with services or other commercial interests

6 door utility bed custom made trailer coverd bed call to see.great work box lockable boxes. call any time 208-249-5688 or jeepitidaho@yahoo.com topcover that locks to keep you tools safe. great for sprinkler workor any job you may do .with newer tires & white wagon spoke rims. Location: boise its NOT ok to contact this poster with services or other commercial interests

Multi-Undercut Saw (Jamb Saw) Roberts 6\" Long Neck Jamb Saw 10-55Powered by an 8000 RPM, 900 watt motor, the 10-55 Long Neck Jamb Saw easily cuts door jambs, baseboard, cabinet toe kicks, inside corners and most hanging doors. The adjustable blade height ensures the proper height for working with different floor coverings from sheet vinyl to thick ceramic tile and wood. The extended tail on the Roberts Long Neck offers better control of the jamb saw, and more leverage against torque. The trigger is located on the tail, enabling the trigger to easily be held in the ON position. The trigger is non-locking to comply with OSHA requirements. * Cuts full inside corners in molding up to 1/2\" thick. * Cuts under toe kicks * Precision vertical adjustments from \"flush to 1-1/16\". * Uses Roberts 10-47 Carbide Tipped Jamb Saw Blade. * Amps 7.5 (industrial grade) * Voltage 120V-60Hz * RPM 8,000 * Arbor 5/8\" * Blade Adapter 20mmJamb Saw Kit Includes * 6-3/16\" carbide tooth jamb saw blade * Spanner wrench for blade retainer * Instruction Manual * Custom molded carrying case * Steel depth guideI bought this saw to do the floor in my home. It works great but i no longer need it. I paid nearly $200.00 for it and would like to get $125.00 odo I might also entertain trades. Thanks Location: Boiseits NOT ok to contact this poster with services or other commercial interests

POWERFUL UNIT ITS A DEWALT IT IS BAD ASS WILL WASH THE @#$ OFF AN APE USED LIGHT DUTY YEAR OLD IN GREAT SHAPE START YOUR OWN PRESSURE WASHING BUSINESS WITH THIS UNIT PRICE IS FIRM 570-2782 Location: meridianits NOT ok to contact this poster with services or other commercial interests

RIDGID THREADER WORK GOOD 249 1758 Location: nampaits NOT ok to contact this poster with services or other commercial interests

This SHOPSMITH Mark V is one great tool with 5 different functions - PLUS I have a 4\" jointer and a scroll saw all powered by the same machine. Comes with all the tools needed to be a Table Saw, Drill Press, Lathe, Horizontal Boring Machine, and 12\" disk sander. Includes lathe thrning chisels, 3 bowl turning face plates, extra drill press chucks, saw blades, extra extension tables for cutting large pieces such as plywood. The whole tool takes up about 8 to 10 square feet of floor space, and comes with adjustable wheels to make it totally mobile or stationary. Call 208.861.6821 for directions and an appointment to see this great set of tools. FATHERS DAY IS COMING!! GREAT GIFT IDEA! Location: S.W. BOISEits NOT ok to contact this poster with services or other commercial interests

Bought new and used one time. The specifics are: 1 HP, 12 inch, 5 inch cutting depth capacity, table tilts 0-45 degrees right, 13x13 inch work table. Email or call 208-631-8376 Location: Nampaits NOT ok to contact this poster with services or other commercial interests

This saw was never taken out of the box, though it has sat in the garage quite a long time. Looks like a very nice saw... to come buy it call 208-949-7389 There are other item for sale, 2 White porcelain scalloped sinks, Tubbs Snow Shoes, Motorcycle Jack, 4 Nissan Factory Alloy Wheels, never used, etc... call 208-949-7389 located in Meridian. Oh, did I say, a GORGEOUS 2007 HARLEY DYNA LOWRIDER at a steal of a price... call Location: Meridian/Boiseits NOT ok to contact this poster with services or other commercial interests

Small gas powered generator on wheels/cart. Name plate data has been lost. Has four (4) 110V outlets on side. Can operate a pellet stove during a power outage. 424-7667 Location: Wilderness Ranchits NOT ok to contact this poster with services or other commercial interests

Portable pump good for irrigating out of ditch. 75.00 thanks for looking Location: Weiserits NOT ok to contact this poster with services or other commercial interests

A 50 year accumulation of woodworking tools, hardwoods including rare exotic wood, and supplies will be auction off Saturday June 20th at 10am. Location is in Blackfoot Idaho. For more infomation and picture visit bluemuleauctions.comits NOT ok to contact this poster with services or other commercial interests

Speedway sandblaster new barely used and older home made one. I believe the new one is 10 Gallon Thanks for looking 100.00 O.B.O Location: Weiserits NOT ok to contact this poster with services or other commercial interests

Heavy Duty front end jack, for lifting Autos. found similar new ones for 500+ asking 125.00 O.B.O thanks for looking Location: Weiserits NOT ok to contact this poster with services or other commercial interests

New in the case 6538-21 Sawzall. 15 amp heavy demolition recip-saw. These go $180-$190 retail. Take this one for $140/ OBO. $50 worth of new blades with full price offer! No ships, cash only. its NOT ok to contact this poster with services or other commercial interests

Brand new Milwaukee 6116-30 (12 Amp) 4.5 to 5 Inch Angle Grinder, paddle with lock-on, retails at $130 (never used). Locals, cash only! Location: Starits NOT ok to contact this poster with services or other commercial interests

12V Cordless M-Spector Digital Inspection Camera, Model 2310-21. If you are wanting specifics, search under the model #, they are simply too numerous to list. Plumbers, Electricians and HVAC pros jump on this deal. Never used on the job, looks brand new. Comes in case w/ 12V battery and charger. All for $140 cash only! Location: Starits NOT ok to contact this poster with services or other commercial interests

Ive got a Sullair Diesel air compressor trailer that one of my employees did not lock the hitch on, now I have a diesel air compressor that is no longer towable. It still runs, just needs a new trailer tongue for the most part. It builds A LOT of air, more than we ever needed to complete our sanblastings jobs. Paid 6000 when we bought it used, and would take $500 for you to just come get it off my lot. Give me a call at 761-1156. No tire kickers please, just too busy for that. Thanks, Bob. Location: MERIDIANits NOT ok to contact this poster with services or other commercial interests