This is an Offenhauser dual port 360 degree, it sells for $260.00 WITH OUT THE CARB. I am asking $225.00 with the carb. Thank you 208-365-3813 Location: Emmettits NOT ok to contact this poster with services or other commercial interests

This rearend has 3.55 gears ready to go. fits 1988 up you can call me at 365-3813 thank you. Location: Emmettits NOT ok to contact this poster with services or other commercial interests

This is an Edelbrock Performer 400, sells new for 219.00, I am asking 125.00 Thank you 208-365-3813 Location: Emmettits NOT ok to contact this poster with services or other commercial interests

4.56 GEAR RATIO, FRONT AXLE IS HYDRAULIC ASSIST RAM W/WARN HUBS, REAR IS MADE BY EATON.8 LUG 3/4 TON, $300.00 OBO. CALL 447-8522 Location: EMMETTits NOT ok to contact this poster with services or other commercial interests

This slider fits the \"PANORAMIC\" window opening for 67-72 GM trucks.It is new, but has a few tiny scratches on the black paint.Installation available by me if needed for 50.00 extra( not including new rubber seal if needed)Can deliver if needed within reason. Call 398-9800 or 447-8521. Location: emmettits NOT ok to contact this poster with services or other commercial interests

2 Shank Receiver Hitch for I beleive a Dodge truck. Was bought for my truck. This hitch has more of a drop down than I need. Will sell for $75.00 Location: Emmett, Idahoits NOT ok to contact this poster with services or other commercial interests

I bought this brand new receiver hitch to be able to haul mother-in-laws motorized wheel chair. Car suspension not strong enough for the weight of the chair. Brand new, Used only once. It is made by U-Haul. New price was $230.00 If I remember correctly. Must sacrifice. Will sale it for $175.00 Location: Emmett, Idahoits NOT ok to contact this poster with services or other commercial interests

This carburator was completly rebuilt and jeted about a year ago and i never used it. call(208)-860-0730 for more info or to make an offer. Location: Emmettits NOT ok to contact this poster with services or other commercial interests

Pair of axles out of a 1981 Toyota Pickup. Front and rear axle complete with 4.10 gears, brakes and hubs. Please email me or call me at 208-365-8659 (Thomas) Location: Emmettits NOT ok to contact this poster with services or other commercial interests

Four 5 Lug Chrome wheels w/BF Goodrich Tri-Gard Sidewall Radial All-Terrain T/A truck tires. LT 285/75 R16. The tread on two of the tires is lower than the other two that have 1/4 inch tread. No rust or chipping on wheels. Asking $500 for the set. Needs to be a cash transaction only. Email with serious inquiries. Location: Emmett Idits NOT ok to contact this poster with services or other commercial interests

contico tuff box in great shape.$150 new. $50 used obo.365-2867 ask for daniel.fits full size trucks. Location: emmettits NOT ok to contact this poster with services or other commercial interests

nice tailgate fits 70s chevy pickups, came off a 1974. asking $180 mike 867-7114 Location: Emmettits NOT ok to contact this poster with services or other commercial interests

nice tail gate for the 1960 to 1966 chevy pickups asking $180 mike 867-7114 Location: Emmettits NOT ok to contact this poster with services or other commercial interests

I have a project truck that has about 30,000 on a rebuild. 350 Sb and a 4 speed manual trans with granny gear, i have already replaced the valve cover gaskets and painted the valve covers. i also replaced the plugs, cap, roter. Needs a radiator cap and a battery and needs a front windshield and i have the back window but a quarter panel on the window needs replaced. has no bed and im not sure what gas tank works but i put gas in both and it ran for a while. it sat for a few years and i had it running a few months ago. This truck has no bed i was going to build one but i dont have the money to finish this project. i am asking 300 obo. thanks, jon 208-794-3765 or email. i do have the title for this truck. this truck doesnt have any rust on the doors, fenders and i dont think their is any on the cab either. Location: emmettits NOT ok to contact this poster with services or other commercial interests

I have a bare 318 block for sale and it must go.Jeff Location: Emmettits NOT ok to contact this poster with services or other commercial interests

Four 5 Lug Chrome wheels w/BF Goodrich Tri-Gard Sidewall Radial All-Terrain T/A truck tires. LT 285/75 R16.The tread on two of the tires is lower than the other two that have 1/4 inch tread. No rust or chipping on the chrome wheels.Asking $600 for the set.Email with serious offers. Location: Emmett Idahoits NOT ok to contact this poster with services or other commercial interests

New internal wastegate 17 psi spring setting. Optional OBX boost controller for an additional $30.00. Contact afternoons and evenings at 208-365-7445 Location: Emmettits NOT ok to contact this poster with services or other commercial interests

Sweet deal really.. accually fits the impossible bed. . goes in the steak holes.. I bolted down the front and pinned the back for easy off in the truck I hador would finish off nicely as a full rackcall Kevin484-2163 Location: Emmettits NOT ok to contact this poster with services or other commercial interests

VERY NICE PROJECT OR DAILY DRIVER !! 350 CI. AUTOMATIC TRANS, COULD BE A DAILY DRIVER, HAS SLOW TRANS. LEAK OTHERWISE VERY DEPENDABLE !! TIRES 90% RUBBER , 3/4 TON, BUMPER EXTENDS FOR CAMPER IF NEEDED. 398-8265 OR 860-5820 Location: EMMETTits NOT ok to contact this poster with services or other commercial interests

GREAT PROJECT 292 CI. AUTOMATIC , STRIGHT BODY , RUNS BUT HAS A KNOCK , 398-8265 OR 860-5820 Location: emmettits NOT ok to contact this poster with services or other commercial interests

Have 1985 ford f-250. NO MOTOR or TRANS. willing to part out truck with in reason. Would like to sell whole truck first. I need to keep it a rollable chasie. Asking 300.00 or best offer. Please call with any questions or email me 369-4050 Dave. bullens2323@yahoo.com. Location: Emmettits NOT ok to contact this poster with services or other commercial interests

I have four 16 x 6.5 Nice, clean aluminum wheels for sale. 8 Lug. (Chev)$220.00 or make offer.Call Chad (208)866-4213Will deliver if needed. Location: Emmettits NOT ok to contact this poster with services or other commercial interests

chev pick-up 8 bed trailer with new tongue jack,with tool box 200.00 obo call 208-365-5108 or 208-284-8845 andy Location: emmettits NOT ok to contact this poster with services or other commercial interests

casting #c8ar 1968 fullsize car 300.00 obo any reasonable offer call 208-365-5108 or 208-284-8845 andy Location: emmettits NOT ok to contact this poster with services or other commercial interests

Its a 1963 - 1966 Turbo Corvair motor, with out the Turbo (It came out of a 63 but, the serial # says that its a 65 or 66)Serial # T12IORL, Please, call with any question447-7824 / 941-2110Thanks!!! Location: Emmettits NOT ok to contact this poster with services or other commercial interests

4 ea (set) of Aluminum Pavement Sprint Car WheelsContact Shawn, 695-5186 or nwdadluvs4@yahoo.com1 ea RR, DuraLight, 15 X 15, 5 \" Backspace, Beadlock $ 1201 Ea LR, Weld, 14 X 15, 6 \" Backspace, Beadlock $ 1201 Ea RF, Weld, 10 X 15, 6 \" Backspace, Beadlock, $ 801 Ea LF, Sanders, 10 X 15, 6 \" Backspace, NON - Beadlock, $ 70Or Complete Set $ 350 Location: Emmett Idits NOT ok to contact this poster with services or other commercial interests

32 X11.50 R15 YOKOHAMA TIRES W/ WHEELS AND LUG NUTS 6 HOLE CHEVY $400.00 CALL 530-355-3001 Location: EMMETTits NOT ok to contact this poster with services or other commercial interests

Stock Dodge 1500 5 Lug Chrome/Steel Wheels with Hankook 315/70r/17 tires. Tires are over 50% as measured by Les Schwab. Here is your chance to save some bucks. Price is fair and firm. Location: Emmettits NOT ok to contact this poster with services or other commercial interests

This is a 4 post lift which is nice because you can put your classic car or pick-up on the lift and park another vehichle underneath or do all of your underwork on your vehichle.. I bought it a year ago and have not had time or money to put concrete down for it. So it just sits and I need to sell it.From post to post it is 11ft wide and 17ft 10in long. The height is 7ft 8in tall.The drive ons are 22in wide and of course 17ft 10in long with 3ft tail ramps.The spread of the drive ons are 6ft 8in wide. (outside to outside).I apologize for all the crap in the way of the lift in the pictures. But you can still see the lift.Call me if your interested 208-695-6610 or 208-409-4115. Location: Emmettits NOT ok to contact this poster with services or other commercial interests

32 X 11.50 R15 YOKOHAMA TIRES WITH WHEELS AND LUG NUTS FOR 6 HOLE CHEVY $400.00 PLEASE CALL 530-355-3001 Location: EMMETTits NOT ok to contact this poster with services or other commercial interests

i have a huge variety of integra parts, performance and oem, so if you need something that isnt listed let me know and i might have it.everything is obo, but i am also looking for trades. i need a/c components ( hoses, compressor, etc i need it all ) i need a drivers side door with power windows, i need the second piece to a two piece header ( the down pipe on a 4-2-1 header ), i need a stock/ high flow catalytic converter, i need all power door panels ( must have power door locks and power windows ), i need stock ek civic side skirts, and tons of other 93 integra parts. if you have any of these things let me know and ill probably buy them off you. hear is what i have.4 oem shocks with no name coilovers4 oem shocks with stock springstwo white no power doors.complete front suspension ( not including axles, shocks, or springs )dashclockclimate controlhatch with glass ( black )tan acura emblemfront and rear bumbers93 integra shell pretty much stripped great project to bring another da back to life.everything behind the dash.no name aftermarket pedalsfour seat belt motorsb18c1 upside down style intake manifoldfront and rear bumper 92-93 stylefront and rear bumper 90-91 stylecomplete sunroof.here are some pictures. if you want a picture of something email me. Location: emmettits NOT ok to contact this poster with services or other commercial interests

i have a front lip and a set of clear corner lights that came off a 92 civic eg hatch. i dont know if they will fit any other models and i dont know what brand they are. if you want more pictures email me. they are both best offer but i am also looking for trades. i need a/c components ( hoses, compressor, etc i need it all ) i need a drivers side door with power windows, i need the second piece to a two piece header ( the down pipe on a 4-2-1 header ), i need a stock/ high flow catalytic converter, i need two all power door panels ( must have power door locks and power windows ), i need stock ek civic side skirts, and tons of other 93 integra parts. if you have any of these things and dont want to trade let me know and ill probably buy them off you. Location: emmettits NOT ok to contact this poster with services or other commercial interests

I have a set of 17\" Chrome wheels with a universal lug nut pattern. They were on my civic but i need money for other things. two of them may need new tire but this was added into the price. These wheels new are worth over 1k. priced low to sell fast. for more information email me or call (208)-365-8946, texts are welcomed too.Keywords: honda, acura, toyota, import, b18, b20, k20, k24, b18c, b18c1, b17, b17a, b17a1, b18c5, b18b1, b18a1, k20a, k24a, b20z, b18c-r, wheels, rims, cars, 17 inch, 17\", low profile, civic, d15, si, ef, ek, si, gsr, type r, ls, gs, boost, turbo, synapse, Location: Emmett, IDits NOT ok to contact this poster with services or other commercial interests

SLIGHTLY USED- RACK-IT, LADDER RACK FOR FULL SIZE STANDARD BED TRUCK. Haul Lumber, ladders, materials. Rack measures 14 5\" long by 69 1/2\" wide. Asking $250 or best offer. Lets make a Deal!! open to trades - Features Full-length formed angle mounting. Removable rear bar equipped with quick release \"D-Clip\" pins. Schedule 40 steel construction Rope hooks allow for quick and easy tie-downs One Piece Welded Strength & Easy Installation Need something that has minimal flex and will enhance the look of your truck? Rack-its® Series 1000 truck racks is the one for you. Designed with unmatched strength and stability, this standard rack provides a versatile and efficient solution for your material handling needs. Weld On Tie Downs. Providing a dual purpose, these tie downs not only offer the function of a cleat, but the hook serves as a great fastening point for tying knots. The angle runs the length of the bed rails, insuring a strong and sturdy connection to your truck. Fully Welded Schedule 40 Construction because it is, without a doubt, the strongest and most durable material used in the industry. Steel pipe wont easily dent or bend, making for the strongest possible carrying surface available. Call 208.559.8283 or email snowman247js@yahoo.com. more pictures w/b posted soon. Location: Boise/Emmettits NOT ok to contact this poster with services or other commercial interests

Installed a Super Hitch for our camper so dont need this one.Came off a 2005HD Chevy Silverado but should fit a 2001-2007 Silverado. $50 OBO 208.559.8283 Location: Boise/Emmettits NOT ok to contact this poster with services or other commercial interests

Good engine and tranny 68643 mi on it. No title. Nose clip and tail lights missing. $800 for all. good tires, engine, tranny. Want to sell all as one. Location: Emmettits NOT ok to contact this poster with services or other commercial interests

IT ALL WORKS PERFECT , THE SUBS ARE IN A BOX THAT GOES UNDER THE BACK SEAT OF A PICKUP.. IF YOU ARE INTERESTED CALL ME AT 208-695-6610

I HAVE 5 OF THESE TIRES TOYO PROXES4-245/45/ZR17 THAT ARE IN NEW CONDITION , THEY SELL FOR 193.00 EACH AT LES SCHWAB--- YOU CAN CALL ME AT 208-695-6610

NEW ABOUT 3 MONTHS AGO, I PAID OVER 600.00 FOR THEM, I STILL HAVE THE PAPER ON THEM. THESE ARE THE DODGE 6 HOLE WHEELS FOR DARANGOS AND DAKOTA THEY WILL FIT THE 2 WHEEL DRIVES AND 4 WHEEL DRIVES... THEY ARE 15X8--AND I HAVE THE CENTER CAPS AND THE LUG NUTS....YOU CAN CALL 208-695-6610-----THANK YOU.

1978 350 chevy from a 78 corvette. engine has been completely rebuilt. bored .030 over, crank is .010/.010 under, coated pistons, new valves, valve springs and retainers,roller tip rockers, comp cams xtreme 274. engine has not been run since rebuild. 365-3985