ECHO Power Pruner model:ppt-260 NEW - $450 (NEWARK DE)
NEWARK DE
ECHO Power Pruner model:ppt-260 Brand new $450.00 paid $600. Email: princssjakieo@yahoo.comBought to trim g-moms trees but she didnt want them trimmed, so need to sell. NEVER used have all the paper workIt extends 12- 16 feetchainsaw has a automatic oilerTOP of the LINEheavy-duty gearbox features dual-sealed bearings, spiral cut steel gears and a manual grease port for maximum lubrication, durability and cutting performance. An adjustable oiler delivers the right amount of oil, every time, for exceptional chain lubrication. The chain tensioning system improves cutting performance and extends bar and chain life. ECHO Power Pruners deliver commercial-grade performance and optimum tree care versatilityEmail me with ur phone number and a good time to come See it if ur interestedthanksJackie email:princssjackieo@yahoo.com Location: NEWARK DEits NOT ok to contact this poster with services or other commercial interests
*Painters* Sata Jet NR 3000 *Painters* - $450 (NEWARK)
NEWARK
I have a Sata Jet NR 3000 Forsale i have no use for the spraygun at all cause i am no longer in the trade. It was used for about a year doing only cut- in jobs with ppg basecoat products. I also have a Waterborne Needle, fluid tip and air cap that i will sell with the gun for extra........................................................... $450 or obo call 302 229 7758 Location: NEWARKits NOT ok to contact this poster with services or other commercial interests
R-12 Reclaim system. In good condition. Barely used. Location: Newark, DEits NOT ok to contact this poster with services or other commercial interests
Ryobi 10" Table Saw w/ Stand - $80 (Newark, DE)
Newark, DE
Im selling a Ryobi BTS12S 10\" Table Saw with stand. It includes the original wrenches and miter gauge. It also has the original 10\" blade that has never been used, though it has collected a bit of dust while sitting in my basement.The saw is in great condition. I just purchased it last December for a small project, so its seen limited use. A new saw sells for about $114. Ill take $80.You can e-mail or call (302) 235-1693. Just leave a message if I cant get to the phone and I will return your call. Location: Newark, DEits NOT ok to contact this poster with services or other commercial interests
Snap-on Harley Davidson tool box - $2800 (newark area)
newark area
snap on harley davidson tool box for sale. this is a double bank.roll cab, middle box and top box. the top and bottom box both have harley davidson graphics..thpicture attached is what the box looks like. its not the actual box due to the fact that there is a bunch of stuff blocking it in my garage and i couldnt get a good pic of it. but this is the same box without the 2 drawer middle section. the box is in exellent shape. mechanic owned. this set up is over 5 thousand new. selling for $2800.00 if you respond with a name and phone # ill get back to you as soon as i can. Location: newark areaits NOT ok to contact this poster with services or other commercial interests
like new only used 4 times total time 1 hr call jc@ 302-420-8151 Location: newark delawareits NOT ok to contact this poster with services or other commercial interests
PIPING STANDS 30.00 EACH - $30 (NEWARK)
NEWARK
PIPING STANDS - 30.00 EACHRidge brand industrial pipe stands. Used for fabricating piping, rating 2000 psi. If interested call Steven @ 540-2049 or e-mail.Thank you Location: NEWARKits NOT ok to contact this poster with services or other commercial interests
PIPING STANDS - $30 (NEWARK)
NEWARK
Ridge brand industrial pipe stands. Used for fabricating piping, rating 2000 psi. If interested call Steven @ 540-2049 or e-mail.Thank you Location: NEWARKits NOT ok to contact this poster with services or other commercial interests
Craftsman 10" table saw - $100 (Newark, DE)
Newark, DE
good dependable saw Full size table, includes rip fence, mitre gauge, and tenon jig. First $100 (What have You Ever Done without a table saw??) Sorry about the goofy photo.... Location: Newark, DEits NOT ok to contact this poster with services or other commercial interests
GREAT CONDITION ROOF BRACKETS INCLUDED USE FOR AND PAINTING GUTTERS PAID $269.00 FOR SETSTEAL FOR $60.00 Location: NEWARK DEits NOT ok to contact this poster with services or other commercial interests
EAGLE AIR HARDWOOD FLOOR NAILER - $200 (NEWARK, DE)
NEWARK, DE
PAID $389.00 USED IT ONE TIME ON MY HOUSE LIKE NEW $200.00firm cash only Location: NEWARK, DEits NOT ok to contact this poster with services or other commercial interests
Freud Dial-A-Width-Dado - $125 (Newark, DE)
Newark, DE
Awesome dado head which was 250.00 new in excellent condition. any questions email or call 302-419-5474 Location: Newark, DEits NOT ok to contact this poster with services or other commercial interests
Hitachi Benchtop Drill Press w/ Laser - $70 (Newark,DE)
Newark,DE
Nice Drill press with laser marking system. Model #B13F in good condition. Any questions email or call 302-419-5474 Location: Newark,DEits NOT ok to contact this poster with services or other commercial interests
MAC TECH SERIES TOOLBOX - $2800 (Newark,De)
Newark,De
I am selling my Mac tech series toolbox as I can no longer afford the payments on it. I owe 2800 on the box as I have only owned it for less than a year. The box when I bought it was over $4,000.00. I have a picture of it and also a web link so you can see the value of the box. call 302-463-2084 or 302-994-1718 ask for Jasonhttp://www.mactools.com/product/tabid/120/p-329042-mb1000a-bl.aspx Location: Newark,Deits NOT ok to contact this poster with services or other commercial interests
Mig Welding Wire - 6 Boxes - $120 (Newark, DE)
Newark, DE
I have 6 boxes of Mig welding wire, selling all for $120.00.(1) 30 lb. box - Lincoln .035 Super Arc L-50 (2) 30 lb. boxes - Lincoln .035 Super Arc L-56 (1) 30 lb. box - Hobart .045 ER70S-3The following two boxes are Open Boxes - Damaged Coils - Wire Still In Good Shape(1) .035 and (1) .045 ER70S, both 30 lbs. Contact me with any questions via this ad or at 302-224-1847, ask for Erin. Location: Newark, DEits NOT ok to contact this poster with services or other commercial interests
HITACHI Brad Nailer 1 1/4" x 18Ga - $45 (Newark)
Newark
Hitachi Brad Nailer NT 32AE 1 1/4\" x 18 Ga.Like-NEW conditionBought it last Fall. Used it to nail molding in my kitchen.Used less than a half-box of brads. Call anytime : (302) 449 - 6096 I can not get to my e-mail very often; so CALL !!! Robert Location: Newarkits NOT ok to contact this poster with services or other commercial interests
Snap On Box and Tools - $3700 (Newark, De)
Newark, De
Starter SnapOn Box (red) Filled with SnapOn tools, Great Condition. asking $3700.00 Will take good offer. You can email me at tjsjeep12@gmail.com or call at 302-668-5706 If you have any questions ask for TJ. Thanks. There are many more pictures of this box and tools that are not listed.. For example Pry bars to screw drivers, Drill, Diagnostic computer NEW, and alot more. Only serious buyers please email or call me thank you.Need it gone will take good offer... Location: Newark, Deits NOT ok to contact this poster with services or other commercial interests
Milwaukee Model 5455 Polisher - $115 (Newark DE)
Newark DE
Listing a Milwaukee 5455 7/9 inch polisher. is in good condition. Some very light residue on red plastic section, can more than likely be washed off. Only dealing locally
Knife Collection - $400 (Newark)
Newark
Entire collection of knives for sale. brands include Buck, Spydreco, Benchmade, Kershaw, etc.. see pics. Call for details. Russell @302-650-7589.Prices are 10.00 to 100.00 or 400.00 for all. I paid as much as $180.00 for one knife!
Work Bench/ Lab Bench W/ Two Drawers - $300 (Newark)
Newark
This is a Industrial Lab Bench made by New England Lab Corp. and is build to the highest standards. The spec. are: top 48\" X 30\" X 1 1/4\" thick, shelves 48\" X 12\" X 1 1/4\" thick and the drawers are 19\" deep X 14\" wide X 4 1/2\" high and the lower drawer is 11\" high. The drawers can slide to either the right or left on a track. The top and the shelves are a solid piece 1 1/4\" thich. The frame is completly welded and powder coated. The shelves are adjustable and it has adjustable feet as well. The work top is 37\" high and would make a great garage or shop work/test bench. If you have any interest, please call Ron at:(302)234-0627 or email.
MATCO 4S TOOL BOX GREAT SHAPE - $1200 (NEWARK DE)
NEWARK DE
MATCO TWO BAY TOOL BOX BLUE GREAT SHAPE NEEDS NEW LOCK
High-Low Bay Ballast Lights - $50 (Newark DE)
Newark DE
We have a lot of (45) High-Low Bay Ballast Lights as shown in the pictures Selling @ $50.00 each unit. We replaced all the lights in our shop this last Summer. These lights sell for New over $435.00 each unit without the bulbs. The bulbs sell for $15.00 each and they last for over 2 years or more using 10hrs per day every day. Each of the units we are selling have light bulbs and come complete. They are great for a Shop or Warehouse. They are made by Cooper Lighting 400Watt Multi-Tap 120-277 Volts. They are all in working condition and look great. 28.00\" Diameter, 24.00\" High. Must be Picked up from Newark Delaware no Shipping.Should you want to purchase entire Lot of (45) we will consider offers. Please Contact John @ 302-366-7540 Ext# 205
Search
Create Post 
Goto List view
