Up for Sale: \" I have the small Shop Vac which works good ! \" The first one is a big 50 Gallon Craftsman Vac. It has been sold already. The smaller one is pretty neat, it latches into a standard 5 Gallon bucket. It also works great, but is missing the hose and wand, which can be used off another vaccume with a small diameter type hose.$30 * * * * * Note : If you want to see or buy this item, E-mail us with your NAME and PHONE NUMBER. People who send their number will be given priority over those who just e-mail asking if the item is still available, then are never heard from again. If it was already sold the AD would not be here. * Give the Pictures below time to load. If you see boxes with X marks instead, just hit refresh till you see the pics. They should all be there. If still you cant see them your firewall or internet security must be blocking them. E-mail me, and I can send them to you directly via e-mail... or I can send you my website address so you can go scroll through all my pictures yourself. * General Disclaimer: This item is likely Used, and sold as is with no warranty. Buyer is encouraged to inspect the item for themselves, as the description above is just the sellers personal, honest, evaluation of the item, and may not be complete, 100% accurate, or cover all asspects that are important to all buyers. No returns or refunds will be given after the transaction is made. Location: Springfield, VAits NOT ok to contact this poster with services or other commercial interests

Craftsman Radial Arm Saw with Stand Location: Springfield VAits NOT ok to contact this poster with services or other commercial interests

Model 705 12\" miter saw with a sturdy Dewalt miter saw stand model DW730 in good condition. Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

Sturdy solid saw with cast iron top in good condition. Comes with tennon jig. Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

Hand truck with continuous handle is functional and built to last. Heavy-gauge tubular steel frame with welded joints for extra strength, 14\" x 7\" toe plate and 8\" solid rubber wheels with ball bearings. Black baked enamel finish. Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

Push Craftsman Lawn mower with bagger21 inch cutmulcher / bagger6.5hp easy start, quiet motorStarts on first pullBlade just sharpenedWe think it was bought in 2004. My Mother used it in a very small yard. Typically it took less than 10 minutes to cut.Call or email 703 569 5021 Location: Springfield, VAits NOT ok to contact this poster with services or other commercial interests

Gunline Tools Spec C-55 Series Checkering Set – includes five tools, instructions and ruler. It is the same at Gunlines Leader set with an extra tool.Gunline Tools 2008 price guide shows the 4-tool set as $48.50, with an additional tool costing around $13.A similar set sold on eBay June 19th for $54.71 plus shipping.See the other items I have on craigslist by searching for “Newington/Springfield”. Location: Newington/Springfieldits NOT ok to contact this poster with services or other commercial interests

J.D. Wallace shaper, 3 phase, 2 hp. ¾ inch spindle. Fence and one cove cutter bit included. Work area is 20\" X 30\". Heavy cast iron frame, feet bolted to a wood base. Im moving, so it MUST go.To see the other items Ive posted, please search for \"Newington/Springfield\". Location: Newington/Springfieldits NOT ok to contact this poster with services or other commercial interests

Heavy duty vintage tool set. Item weighs 30 pounds -- tool bar for dies is 24\" long. The wooden case measures 34” x 10” x 2½”. [[[[[See the Greenlee set currently on ebay for a comparison (wood case, weighs 30 lbs.) -- with a Buy It Now price of $249 plus $38 shipping.]]]]]My tap & die set was manufactured by S.W. Card Mfg. Co. of Mansfield, Mass, a division of Union Twist Drill Co. Label says, “The Card Quality Set No. 522. No. 500 Paragon screw plates.” It lists 16 cutting sizes.It has SAE Std. and U.S. Standard (USS) size dies from ¼” to ¾.” Missing are two dies (¾-16 SAE and ¾-10 USS). It has: SAE taps: ¼-28, 5/16-24, 3/8-24, 7/16-20, ½-20. USS taps: ¼-20, 5/16-18, 3/8-16, 7/16-14. It is missing these taps: SAE: 9/16-18, 5/8-18, ¾-16. USS: ½-12, 9/16-13, 5/8-11, ¾-10.See the other items I have listed by searching for \"Newington/Springfield\". Location: Newington/Springfieldits NOT ok to contact this poster with services or other commercial interests

Scaffold Rolling Tower 6 High 29\" X 6 Deck W/ U Locks - Brand new, pkup only, its heavy - 165 pounds Heavy, if interested please email me at ahawesome at yahoo. Home Depot price $495ThanksPost big pictures on craigslist with CraigsPic.com Location: Springfield, VAits NOT ok to contact this poster with services or other commercial interests

Just what you need to blow off grass and leafs Location: Springfield, Vaits NOT ok to contact this poster with services or other commercial interests

Gas, very nice condition!!!!!!!!!! Location: Springfield, Vaits NOT ok to contact this poster with services or other commercial interests

very nice little work horse! Location: Springfield, Vaits NOT ok to contact this poster with services or other commercial interests

Solid, sturdy wood lathe in good condition. Comes with 5 gouges, skews etc.. 2 face plates and a drill chuck. Location: Springfield its NOT ok to contact this poster with services or other commercial interests Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

Assorted tools - Stanley Heavy Duty 1/2 Inch Electric Drill; Snap-On 3/4 Inch Long Handle Ratchet & Socket; Stanley Classic Mitre Saw; Sears Torque Wrench; Large Crow Bar; Log Splitter; Wood Bit Hand Drill; Hammer. $100 takes it all. Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

* Fixer-Upper Broken Tools for PARTS ONLY - Not Work, DONT KNOW WHY, AS IS- Table Saw, Makita Model-2708 with top, body, motor and Nothing else, AS IS, $20- Circular 7.25\" Saws for parts, AS IS, Skil-5150+Makita-5007NB+Hitachi-C7BD2, 3/$25- Gas Chain Saw, Craftsman 2.3/16 Mod-358.353690, No blade-No chain, AS IS, $20- Gas trimmer Homelite 25cc UT20707, Fixer Upper, Not Work, AS IS, $15- Gas Lawn Mower, Starts + Runs Rough, AS IS, $30 Location: Burke / Springfieldits NOT ok to contact this poster with services or other commercial interests

Double Insulated Plate Joiner. Used for one small project - Great condition! Includes instruction manualDescription - * Plate joiner kit handles a variety of wood and offers seven different cutting settings * Industry-leading, super powerful 7.5 Amp motor rotates blade at 10,000 RPM * Four-inch blade makes standard-size cuts; two-inch blade easily handles cuts as fine as 1-1/2 inches * Measures seven inches in height and weighs 7.5 pounds * Comes with two blades, centering plate, spanner wrench, dust bag, and chip deflectorHeres a link to the same tool new - http://www.amazon.com/Porter-Cable-557-7-5-Plate-Joiner/dp/B00004YKUO/ref=sr_1_1?ie=UTF8&s=hi&qid=1244995500&sr=1-1 Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

Solid, sturdy wood lathe in good condition. Comes with 5 gouges, skews etc.. 2 face plates and a drill chuck. Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

It is 3 tool boxes on wheels and handle to pull with. The large box is 24 inch long 13 high and 13 wide has one tray inside. Second box locks into place on top of the large one it is 21 inch long 7 high and 13 wide on top of it is a small box for all of your small items and comes off. You can put them all together or just take the one that you need. It is used but in good shape.Call 703 569 5021 or email Location: Springfield VAits NOT ok to contact this poster with services or other commercial interests

This tool belt has 8 pockets 1 hammer holder and fits up to 44 inch waist. In good shape.Call 703 569 5021 or email Location: Springfield VAits NOT ok to contact this poster with services or other commercial interests

HAVE AN EXCELLENT, IN GREAT CONDITION HUSKY TOOL BOX/HANDLED FOR EASY MOVING-YELLOW IN COLOR. CAN ALSO, BE MOUNTED ON BACK OF TRUCK BED FOR EASY CARRY OF TOOLS, ETC. DIMENSIONS ARE 5 FT IN LENGTH X 3 FT IN WIDTH, X 3 1/2 HIGH. BOX SOLD FOR NEARLY $600 NEW FROM HOME DEPOT. $250 OBO. PICK ONLY. Location: SPRINGFIELD, VAits NOT ok to contact this poster with services or other commercial interests

Murray Lawn MowerMower has 6 HP22 inch cutbagger/mulcher New CARBERATOR (cost $45)Sharpened blade1 Pull startCall or email 703 569 5021 Location: Springfield, Vaits NOT ok to contact this poster with services or other commercial interests

I have 3 Black and Decker 9.6 v rechargeable drills 2 batteries and 1 charger, don’t know if they work or not. Also 3 tools I don’t know what they are hoping someone will know by the picture. 10 plastic fitting I don’t know for what, 3 are in the packaging and say Rotating Kit.Call 703 569 5021 or email Location: Springfield VAits NOT ok to contact this poster with services or other commercial interests

Debilviss Contractor Air Compressor. 2 tanks 4-gal , 120 PSI , 1 1/2 HP , 110 volt . Good working condition . $ 150 firm . Call Bob- 703-719-7754 Location: Springfield, VA its NOT ok to contact this poster with services or other commercial interests

J.D. Wallace shaper, 3 phase, 2 hp. ¾ inch spindle. Fence and one cove cutter bit included. Work area is 20\" X 30\". Bolted to a wood base. Piece missing on front skirt of the top (see photos).I never got a phase converter so I could use it at my house. Now Im moving, so it MUST go.If this seems priced too high, spend $800 more for a new Jet model 708320 shaper from Sears.com with less horsepower and a smaller table for just $1,019 plus shipping. Thats why this shaper is attractive -- you can buy a phase converter and still have a bundle of cash left. Visit phaseconverterinfo.com or americanrotary.com for information of phase converters. Rotary converters scored the best, and although slightly expensive, can be used on a variety of 3-phase equipment once you have purchased one.To see the other items Ive posted, please search for \"Newington/Springfield\". Location: Newington/Springfieldits NOT ok to contact this poster with services or other commercial interests