12\" two speed band saw1 1/8 HP, 6\"deep of cut, tilt blade 0-45o , work surface 23\"x27\", 80\"Blade, 1/2\"sanding belt, built-in work light, bevel angle tilt head, electricity 110 to 115 volts. Call to 703-763-1703 Location: Manassasits NOT ok to contact this poster with services or other commercial interests

$4,195.00 or trade. Would consider financing for an established business with references.This is a variable speed test bench that is capable of performing a full dynamic test on all alternators up to 200 amps including aircraft and locomotive. In addition, it will test the new 42 volt charging systems on motor vehicles.Alternators above 200 amps can be tested also however if you load it to above 200 amps, you start to exceed the ability of the 7-1/2 HP motor and the carbon pile. This bench is approximately fifteen years old and has been in storage since 2001. Jimco’s philosophy is “We DESIGNED it, we BUILD it, we SUPPORT it!” The MRP on this bench when it was built was approximately $12,000.00. I do not know what the current price would be.This test bench was custom built for me, to my specifications. I have extensive hands on experience using this machine, and my knowledge of the operation of this piece of equipment conveys with the sale.There is no other bench made that is as versatile or capable as this one.This bench was designed for high quality, high production alternator rebuilding shops. The manufacture has an excellent reputation, will readily support this machine and actually has a policy of handling all phone calls without voice-mail. The manufacture will still build an almost identical bench to this day and will most definitely sell you the most up-to-date information and adapters to test current as well as future alternators as they are released.Any parts that might ever be needed for this machine are available from the manufacture as well as many of the more common parts being available from your local Grainger store. The variable speed feature assures that while performing your test you can verify that the alternator will be able to keep up with the vehicle loads at idle as well as any other rotor speed. Location: Manassas, VA20143its NOT ok to contact this poster with services or other commercial interests

Stanley 93-292 FatMax Mobile Project Center 33-Inch Tall Clamping Work Bench and Hand Truck. New in the box. $60 CASH onlyFrom the Manufacturer2-in-1 portable work center - clamping work bench and hand cart. Hand cart: designed to carry 220-pounds. Work surface: 660-pound load capacity. Work surface: 660-pound load capacity. Surface height: 33-inches. Clamping mechanism is easily adjustable with rotating handles. Versatile clamping with multiple peg holes. Electric power capability; 3 sockets and cable holder. Innovative folding mechanism. Telescopic cart handles are ergonomically designed and retract below the work surface when in the work bench position.Product DescriptionFatmax, Mobile Project Center, Versatile 2 In 1 Product, That Easily Transforms From An Innovative Workbench To A Durable Hand Cart, Engineered For Work Around The Home Or On The Job Site, Designed To Exceed User Expectations, Fatmax Mobile Project Center Has A Work Surface That Supports 660 LBS & A Scoop Designed To Carry 220 LBS, Also Has 3 Electrical Sockets & A Cable Holder, When Folded, A Stable Project Center Can Easily Be Stored In Tight Spaces Or In The Back Of A Car, Truck Or Van. Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

I also have a New Workforce Ball bearing roller stand, brand new. $25 Location: Manassas parkits NOT ok to contact this poster with services or other commercial interests

Used ladders...Werner 4 Alum ladder $10Green Gorilla 6 ladder, type II duty $35Step Stools $7Used Paint supplies..rollers, covers, paint tarps..... Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

Yard Machine Snow Thrower purchased from Lowes $500 = used two winters ago and wont start this winter .. carburetor needs cleaned. $75 obo .. must get storage cleaned out this week... Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Just came out of services. Works great. Priced great!! For viewing arraingements, please call Steve @ (571)238-2068. Cash only/Local pick-up.Thanks! Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Seven pieces of heavy-duty pegboard, each piece approx. 1 foot by 8 feet and chrome-plated hooks for 1/4\" thick pegboard with large holes as itemized below. $35 for all. 703-368-732346 hooks approx. 8\" long10 hooks approx. 16\" long16 hooks approx. 12\" long 30 Hooks approx. 4\" long8 shelf brackets10 misc hooks 4 1/2 - 12\" long Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Great cond. Used for about 1 year. Used Tire company outa business... Also have the Branick Tire Cage for an extra $250. Tire cage new is around $500.00 The EF tire machine is $4000 + new. I want these out of here asap. Please call Steve @ (571)238-2068. Thanks for lookin!! Location: Manassasits NOT ok to contact this poster with services or other commercial interests

This Milwaukee Hammer Drill is heavy duty and comes with case and bits. Works fine. In okay shape. Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Nice equipment for welding business, powered welder/generator. Please call me at 703-763-1703Information of the machine1981 Miller roughneck 2E welder/generator, 14 HP tecumseh gas engine electric start .35 cables. runs and works great. ser# JB499664 /GEN 230VOLTS A/C. Buyer must arrange shipping or pick up Location: Manassasits NOT ok to contact this poster with services or other commercial interests

12\" two speed band saw1 1/8 HP, 6\"deep of cut, tilt blade 0-45o , work surface 23\"x27\", 80\"Blade, 1/2\"sanding belt, built-in work light, bevel angle tilt head, electricity 110 to 115 volts. Call to 703-763-1703 Location: Manassasits NOT ok to contact this poster with services or other commercial interests

TAKE IT ALL OFF MY HANDS FOR 45.00 JUST NEEDS SOME BOTS AND A HANDLE ONLY USED ONCE!!!!!!!!! Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

Picture One Never Used $100.00 Or B/OPicture Two Never Used $100.00 Or B/O Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

Finish Line Devilbliss air spray gun FLG3. Best offer. Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Husky 11 Gallon Air Holding Tank. 165 PSI. Excellent Condition. Used once. Will let go for $30.00 Location: Manassas, VAits NOT ok to contact this poster with services or other commercial interests

Almost new Craftsman 16-inch variable speed scroll saw with original box and owners manual. Model # 137.216100. Runs great and in EXCELLENT condition! Used only two times--had many neat woodworking ideas in mind but never the time. Paid $125, asking $75/obo.Features:--Upfront controls--Table tilts 45 degrees right and left--Tool-less blade clamp so you can change blades w/o tools--Quick blade tension and release system--550-1000 strokes per minute--Multi directional air blower--Accepts pin and plain end blades--Micro adjusting rack and pinion bevel control--Large precision ground cast iron tableLocated near Davis Ford Road and Prince William Pkwy side of Woodbridge. Location: Woodbridge/Manassas VAits NOT ok to contact this poster with services or other commercial interests

$4,495.00 or trade. Would consider financing for an established business with references.This is a variable speed test bench that is capable of performing a full dynamic test on all alternators up to 200 amps including aircraft and locomotive. In addition, it will test the new 42 volt charging systems on motor vehicles.Alternators above 200 amps can be tested also however if you load it to above 200 amps, you start to exceed the ability of the 7-1/2 HP motor and the carbon pile. This bench is approximately fifteen years old and has been in storage since 2001. Jimco’s philosophy is “We DESIGNED it, we BUILD it, we SUPPORT it!” The MRP on this bench when it was built was approximately $12,000.00. I do not know what the current price would be.This test bench was custom built for me, to my specifications. I have extensive hands on experience using this machine, and my knowledge of the operation of this piece of equipment conveys with the sale.There is no other bench made that is as versatile or capable as this one.This bench was designed for high quality, high production alternator rebuilding shops. The manufacture has an excellent reputation, will readily support this machine and actually has a policy of handling all phone calls without voice-mail. The manufacture will still build an almost identical bench to this day and will most definitely sell you the most up-to-date information and adapters to test current as well as future alternators as they are released.Any parts that might ever be needed for this machine are available from the manufacture as well as many of the more common parts being available from your local Grainger store. The variable speed feature assures that while performing your test you can verify that the alternator will be able to keep up with the vehicle loads at idle as well as any other rotor speed. Location: Manassas, VA20143its NOT ok to contact this poster with services or other commercial interests

I can demo it for you. It needs a new plug and a couple fittings. Nice condition and price. I am available this afternoon to show it. 703-489-6077 Location: Manassasits NOT ok to contact this poster with services or other commercial interests

This antique wrench is 18\" long and is made of drop forged steel. The markings on it are: \"Lawson US, Buffalo NY\" \"HAME\"\"L and N RR\"\"Patented Dec 14, 1920\"It is for sale for $35. Call 571-330-8833. Please do not call after 9:00 p.m. Location: Manassas, VAits NOT ok to contact this poster with services or other commercial interests

This antique tension indicator measures 19 inches long. The label on it reads: AMMCO Tension Indicator; tension in terms of torque; dial reading in foot pounds; Size 1F - Capacity = 175 ft. lbs. Patent Nos. 2.283.888: RE 22.219 Pat. Pending. Automotive Maintenance Machinery Co., North Chicago, Illinois, U.S.A. The instructions on the dial read: Set red line on zero by rotating cover. To reverse dial turn button one full turn. This item is for sale for $25. Call 571-330-8833. Please do not call after 9:00 p.m. Location: Manassas, VAits NOT ok to contact this poster with services or other commercial interests

This Ridgid Band Saw is a powerful unit that delivers precisionBRAND NEW, NEVER USED~ Very quiet 15-amp 3/4HP motor and is totally enclosed and fan-cooled (TEFC)~ Nice blade guide adjustment & tensioning options. Makes blade tensioning easy~ Soft-touch controls are large and easy to adjust~ Two micro adjustable blade-tracking guides ensure precise cuts~ Dust collection port beneath the table~ Cast iron table and frame set with sturdy legs Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Used ladders...Davidson 6 wood ladder, type III duty...$15Werner 4 Alum ladder $10Green Gorilla 6 ladder, type II duty $35Step Stools $7Used Paint supplies..rollers, covers, paint tarps..... Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

New Workforce Ball bearing roller stand. Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

Brand New Workforce sawhorses (2). 1000 lb weight capacity. Anti-slip rubber bases. $25 CashI also have a New Workforce Ball bearing roller stand, brand new. $30 Location: Manassas parkits NOT ok to contact this poster with services or other commercial interests

Your power can go out or your sump pump can stop working. The backup pump will ease your worry about a basement flooding. This backup sump pump system has never been used, it is new and in the box. I even have a battery for it and I believe it has a charge. I will sell the battery and the backup sump pump for $80 total. The original price for the backup pump alone was $125. Location: Manassas, VAits NOT ok to contact this poster with services or other commercial interests

Roll Cart, Locking Flip-Top, 4 Locking Drawers, Screwdriver Compartment, BlackI only had this for one year. Paid $600 brand new. Some stickers and minor scratches but everything is in good working condition.• Gas shocks with Quick Disconnect System• Retractable Side Work table• Protective rubber bumpers• Mounting holes on end panel for storage accessories.• External 15 3/8\" x 2\" tray for spray cans and other small items.• Will accommodate four long handled pry bars/screwdrivers including two extra long stations plus nine additional standard length items:• Auto locking mechanism locks drawers when lid is closed.• Corner stiffeners for rigidity and strength.• Drawers feature ball bearing slides for smooth movement.• Plated fasteners resist corrosion and self-locking nuts assure a rigid, secure assembly.• Non-toxic mats in shelf, drawers and top compartment protect unit and keep tools from sliding.• Four, 5\" x 2\" swivel casters with needle bearings and grease fittings assure smooth rolling over the long haul.• Two locking casters keep the cart stationary when required.• Locking support tabs add strength, increase load capacity and facilitate quick assembly.• Made from heavy gauge steel for superior strength. Location: Manassasits NOT ok to contact this poster with services or other commercial interests

This Milwaukee Hammer Drill is heavy duty and comes with case and bits. Works fine. In okay shape. Location: Manassasits NOT ok to contact this poster with services or other commercial interests

$4,300.00 or tradeThis is a variable speed test bench that is capable of performing a full dynamic test on all alternators up to 200 amps including aircraft and locomotive. In addition, it will test the new 42 volt charging systems on motor vehicles.Alternators above 200 amps can be tested also however if you load it to above 200 amps, you start to exceed the ability of the 7-1/2 HP motor and the carbon pile. This bench is approximately fifteen years old and has been in storage since 2001. Jimco’s philosophy is “We DESIGNED it, we BUILD it, we SUPPORT it!” The MRP on this bench when it was built was approximately $12,000.00. I do not know what the current price would be.This test bench was custom built for me, to my specifications. I have extensive hands on experience using this machine, and my knowledge of the operation of this piece of equipment conveys with the sale.There is no other bench made that is as versatile or capable as this one.This bench was designed for high quality, high production alternator rebuilding shops. The manufacture has an excellent reputation, will readily support this machine and actually has a policy of handling all phone calls without voice-mail. The manufacture will still build an almost identical bench to this day and will most definitely sell you the most up-to-date information and adapters to test current as well as future alternators as they are released.Any parts that might ever be needed for this machine are available from the manufacture as well as many of the more common parts being available from your local Grainger store. The variable speed feature assures that while performing your test you can verify that the alternator will be able to keep up with the vehicle loads at idle as well as any other rotor speed. Location: Manassas, VA20143its NOT ok to contact this poster with services or other commercial interests

Vector power inverter for your vehicle--1000 Watt. Hooks up to your battery and you have two 120VAC outlets to plug stuff in. Powers up to 8.5 Amps. New ofb. Please make reasonable offer. Location: Manassasits NOT ok to contact this poster with services or other commercial interests

This antique tension indicator measures 19 inches long. The label on it reads: AMMCO Tension Indicator; tension in terms of torque; dial reading in foot pounds; Size 1F - Capacity = 175 ft. lbs. Patent Nos. 2.283.888: RE 22.219 Pat. Pending. Automotive Maintenance Machinery Co., North Chicago, Illinois, U.S.A. The instructions on the dial read: Set red line on zero by rotating cover. To reverse dial turn button one full turn. This item is for sale for $25. Call 571-330-8833. Please do not call after 9:00 p.m. Location: Manassas, VAits NOT ok to contact this poster with services or other commercial interests

Little Giant 9 to 15 Foot Extension Ladder System, Type 1Retails for $249Great condition. Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Stanley 93-292 FatMax Mobile Project Center 33-Inch Tall Clamping Work Bench and Hand Truck. New in the box. $80 CASH onlyFrom the Manufacturer2-in-1 portable work center - clamping work bench and hand cart. Hand cart: designed to carry 220-pounds. Work surface: 660-pound load capacity. Work surface: 660-pound load capacity. Surface height: 33-inches. Clamping mechanism is easily adjustable with rotating handles. Versatile clamping with multiple peg holes. Electric power capability; 3 sockets and cable holder. Innovative folding mechanism. Telescopic cart handles are ergonomically designed and retract below the work surface when in the work bench position.Product DescriptionFatmax, Mobile Project Center, Versatile 2 In 1 Product, That Easily Transforms From An Innovative Workbench To A Durable Hand Cart, Engineered For Work Around The Home Or On The Job Site, Designed To Exceed User Expectations, Fatmax Mobile Project Center Has A Work Surface That Supports 660 LBS & A Scoop Designed To Carry 220 LBS, Also Has 3 Electrical Sockets & A Cable Holder, When Folded, A Stable Project Center Can Easily Be Stored In Tight Spaces Or In The Back Of A Car, Truck Or Van. Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

Roadmaster Jump Starter Portable Power Station. Like New, Works Good. Model #JNS1800. Needs a Charger Plug. Location: Manassas, VAits NOT ok to contact this poster with services or other commercial interests

BRAND NEW!! NEVER BEEN USED.Featuring a comfortable mid handle design with soft grips, this 3/8-inch cordless drill from Black & Decker is a pleasure to hold and operate. Compact and lightweight, yet strong enough to drill and drive screws through metal, plastic, and wood, the CD9602K gets its power from a 9.6-volt NiCad battery. It also boasts a six-position clutch for versatility and to guard against screw stripping; built-in bit storage to keep what you need exactly where you need it; and a variable speed range from zero to 700 RPM for incredible precision and control. In addition, this handy tool provides 100 in./lbs. of torque so it can take on a variety of projects--from repairing or putting together furniture to hanging mirrors. And its extremely easy to use--simply put more or less pressure on the trigger to change the speed of rotation. Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Porter Cable 14.4 Volt cordless drill. Comes with carring case, instructions, charger and two batteries. Location: Bristow/Manassasits NOT ok to contact this poster with services or other commercial interests

DEWALT DW706 15 Amp 12-Inch Dual Bevel Compound Miter saw. Used but works fine. The newer model sells for $379 on amazon. Youve decided to tackle that remodeling project, but your miter saw cant handle the tall baseboards and crown molding youve picked out for the job. Relax, the DeWalt DW706 is up to the challenge. With the highest vertical cutting capacity in its class, the 12-inch DW706 can power through crown molding vertically up to 6-5/8 inches tall and base molding up to 6 inches. Its flat cutting capacity is also impressive at 8 inches. But its stock capacity isnt the only thing going for this saw. A lightweight design (the saw weighs just 44 pounds) and built-in carrying handle make it portable enough to tote easily from job to job. Better yet, the saws double-bevel design allows you to flip the blade rather than the materials youre cutting, letting you finish cuts more accurately. The DW706 also cuts 50-degree left and right miter angles. Easy adjustments, including 11 positive stops at the most common miter angles, save time and ensure greater precision, while a quiet motor and smooth arm operation enhance overall user comfort, making this a great saw for day-in, day-out use. Location: manassas parkits NOT ok to contact this poster with services or other commercial interests

Senco Duraspin Screw fastening system/3,300 RPM Collated Screwdriver. Doesnt appear to have been used very much. In the case. Sells on Amazon for $100 plus shipping. Technical Details * Corded power for the demanding need of professional remodelers and contractors * Drives 1-inch to 2-inch screws ,even-inch hard woods * Each kit comes complete with tool, two spare drive bits, drywall and wood nose -pieces and rugged carrying case * Trigger lock with reverse for continuous work * Built-inch belt hook ,comfort grip, adjustable depth of drive for flush drive or countersinkProduct DescriptionFrom the ManufacturerThe powerful, versatile DS200-AC screwdriver makes easy work of tough jobs. Professional remodelers, contractors and do it yourselfers will appreciate the convenience of the 3,300 rpm collated screw system, which increases productivity by eliminating the need for handling loose screws. The DS200-AC has corded power to drive 1-inch to 2-inch screws into even the toughest work surfaces.Product Description1\" To 2\" Corded Collated Screwgun, 3300 RPM With High Torque Motor, Perfect For The Professional Who Needs Corded Power & Speed For Both Drywall & Wood To Wood Applications. Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

Delta Sidekick 10 Sliding Compound Miter Saw 36-240. Excellent Condition. Never used commercially; only for home projects. Original Blade.Sidekick® 10” Compound Miter SawSPECIFICATIONSFrom crosscuts tocompounds—this one’s gotall the angles covered.• Powerful 13 amp., motor provides plenty ofpower for tough cutting jobs.• Electric blade brake automatically stops sawblade in seconds.• Bevel scale for quick, easy blade tilt settingswith adjustable positive stops at 0° and 45° L.• Built-in arbor lock for easy, singlewrench blade changes.• Work clamp to securely hold stockfor more accurate cutting.• Convenient lock handle verticallyclamps the rotating table at theselected miter setting; lesseningdistortion or variances in miter settingscommon to table edge locking systems.• Lubricated-for-life ball bearings at vital wearpoints to assure trouble-free performance withless maintenance.Model 36-210 Sidekick® 10 Compound Miter Box.Includes basic machine with 13 amp., 120V, 60Hz.motor; 5 3-conductor cord with grounding type plug,electric blade brake, 10 diameter carbide-tipped sawblade, retractable blade guard, dust bag,Motor ........................................................... 15 amp., 120V, 60 Hz.Blade:Diameter .................................................................... 10 (254 mm)Arbor ............................................................................. 5⁄8 (16 mm)Speed ............................................................................... 5000 rpmCapacity:Crosscut ................................................ 55⁄8 x 21⁄2 (143 x 64 mm)31⁄2 x 31⁄2 (89 x 89 mm)Miter at 45° R & L ..................................... 4 x 21⁄2 (102 x 64 mm)31⁄2 x 21⁄2 (89 x 64 mm)Bevel at 45° L ........................................ 55⁄8Ó x 15⁄8 (143 x 41 mm)Compound 45° x 45° ................................ 4Ó x 15⁄8 (102 x 41 mm)Fence Size R & L ................................. 21⁄2Ó x 81⁄2Ó (64 x 216 mm)Table:Diameter ................................................................. 103⁄8 (264 mm)Sides ........................................................................... 33⁄4 (95 mm)Miter Stops ................................................ 0°, 221⁄2° and 45° R & LBevel Stops .................................................................. 0° and 45° LOverall Dimensions:Height ........................................................................ 20 (508 mm)Width ...................................................................... 181⁄4 (464 mm)Depth ......................................................................... 28 (711 mm)Weight ...................................................................... 30 Ibs. (14 kg Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Everything worked a year ago when parked. Dead batteries. Will get working when appointment is made for viewing. Please call Steve @ (571)238-2068 or E-Mail. Thanks! Location: Manassasits NOT ok to contact this poster with services or other commercial interests

I used this level while finishing my basement and now its just taking up space. Still in near perfect condition, aside from a few sharpie marks and smudges. Email with questions, thanks! Location: Bristow / Manassas / Gainesvilleits NOT ok to contact this poster with services or other commercial interests