I have (4) of these fixtures - they are new but have been in storage and moved several times so the packaging is worn, one of the boxes is opened the rest are sealed. These fixtures retail for hundreds each, looking to get rid of all for $200. Can be mounted on wall or ceiling. SistemaluxModem Large Ar wall mount three3103-W Location: Annandaleits NOT ok to contact this poster with services or other commercial interests

I also have a New Workforce Ball bearing roller stand, brand new. $25 Location: Manassas parkits NOT ok to contact this poster with services or other commercial interests

100 % working and great condition \"Chicago Electric Company\" Electric 440lb hoist. Location: Stafford, Vaits NOT ok to contact this poster with services or other commercial interests

Used ladders...Werner 4 Alum ladder $10Green Gorilla 6 ladder, type II duty $35Step Stools $7Used Paint supplies..rollers, covers, paint tarps..... Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

Yard Machine Snow Thrower purchased from Lowes $500 = used two winters ago and wont start this winter .. carburetor needs cleaned. $75 obo .. must get storage cleaned out this week... Location: Manassasits NOT ok to contact this poster with services or other commercial interests

600SC SCMI band saw, looks new, hardly used.3hp, 220 volt 3 phases/n 1284 with adjustable fence14\" cutting depthCarter guides$2950 or best offerCall OB or Dave OBrien301 564 0223 or 301 385 8878 Location: Kensington, MDits NOT ok to contact this poster with services or other commercial interests

Fay & Scott 10 unidrive latheCall OB or Dave OBrien301 564 0223 or 301 385 8878 Location: Kensingtonits NOT ok to contact this poster with services or other commercial interests

Just what you need to blow off grass and leafs Location: Springfield, Vaits NOT ok to contact this poster with services or other commercial interests

Gas, very nice condition!!!!!!!!!! Location: Springfield, Vaits NOT ok to contact this poster with services or other commercial interests

very nice little work horse! Location: Springfield, Vaits NOT ok to contact this poster with services or other commercial interests

Perfect for your shop library, hand tools and/or odds and ends. Sturdy (fully backed) with 3 shelves. Measures 44-1/2” high by 22” wide by 9-3/4” deep. Does NOT include books shown. Location: Alexandria, VAits NOT ok to contact this poster with services or other commercial interests

The small cabinet on the bench measures 15\" wide; 30\" high and 12\" deep (2 this size available); the cabinet with the router shown but not included in the price measures 30\" high 12\" deep and 24\" wide - (2 this size available); the cabinet/bench on the floor measures 48\" wide, 25\" front-to-back and 35\" high - All 5 cabinets for $20. Location: Alexandria, VAits NOT ok to contact this poster with services or other commercial interests

Over 25 pounds of various size unused nails including many galvanized. Some of the boxes are full, some partially full – They all go as a package Location: Alexandria, VAits NOT ok to contact this poster with services or other commercial interests

- Vacuum: Craftsman Wet-Dry 1.75HP 6-Gallon on Wheels with hose $20- Light Duty hand Truck and Heavy Duty 50G Bucket, both $10- Heavy Duty Anchor Bench chair $30- Tool box Metal Craftsman with internal tray, 18W-8D-10H, $20- Range Fume Hood Non-Ducted standard 30\" yellow with light, $10 Location: Burkeits NOT ok to contact this poster with services or other commercial interests

Ford code reader ob1 made by Innova use 2 times,includes instruction book. $20.00 703-623-1710 - 703-623-1710 Location: Annandale,Va.its NOT ok to contact this poster with services or other commercial interests

New, perfect condition, includes bucket. This is the original Bucket Boss brand. About 40 pockets, drill holster and tape strap. Location: Alexandria, VAits NOT ok to contact this poster with services or other commercial interests

An antique, sturdy and reliable drawing board for sale. Great potential but I have no use for it any longer. We can discuss delivery! Please call Ken 540-336-8683 for more information. Location: Winchester, VAits NOT ok to contact this poster with services or other commercial interests

DEWALT hand held, electric power sander, model DW 411. PURCHASER MUST PICK UP. $20 CASH ONLY. Location: Gaithersburg, MDits NOT ok to contact this poster with services or other commercial interests

Johnson, 48” LEVEL, 062 no. 648, Brass bound Mahogany, in Johnson Case. Like New; made in USA. This Level is beautifully crafted in Mahogany and is Edged with Brass. For the Sophisticated Gentleman Bricklayer; almost too nice to use. This is an older level; was owned by a master bricklayer, who used this level only on special jobs, a true craftsman. $50.00 for Level and Case. Very usable and also very collectible; a show piece of quality; proudly Made in USA; this level was made for everyday use... We are a non-smoking household. Since we do not get our email everyday, the cell phone is much faster than email, call Bob, usually available from 9am to 9pm, at 240.286.2987, in Riverdale, MD, close to the University of Maryland and New Carrollton. Location: Riverdale, MDits NOT ok to contact this poster with services or other commercial interests

Very nice!!!!!!!!!!! Location: Annandale, Vaits NOT ok to contact this poster with services or other commercial interests

Pro model Location: Annandale, Vaits NOT ok to contact this poster with services or other commercial interests

Edger has a Honda 8 hr motor. Great edger. Strong motor. Asking $850.00. Please email me if you have any questions Location: Sterlingits NOT ok to contact this poster with services or other commercial interests

Craftsman C3 19.2 volt Right Angle Drill/Driver, Brand New Not Refurbished, 3/8 in. Keyless Chuck, Motor Brake, Reversible, Speed Range: 0-1050 rpm, Torque: 150 in./lbs., Built-In Bit Storage w/ 2 double ended bits, Owners Manual. Received as gift as part of a bigger set but already have one and dont need 2. Battery or charger not included. Location: Warrenton Areaits NOT ok to contact this poster with services or other commercial interests

RABQF2X500T $82.00 RETAILQuantity: ONE Heavy duty telescoping tripod stand extends to 6 high Collapses fully for easy carrying Double reinforcing struts for extra tripod strength Two powerful 500 watt work lights for a total of 1000 watts Lights adjust 360ø horizontally and 90ø vertically High quality on/off switches Tempered glass Extra depth wire guards 12 power cord with grounded plug Two 500 watt lamps included Lamps are 130 volts, for 2,000 hour life IN VERY GOOD CONDITION.CASH ND CARRY ony 25.00please call SUSAN 540-429-3700 Location: STAFFORD,VA 22554its NOT ok to contact this poster with services or other commercial interests

Skils 4680-04 Laser Jigsaw was designed with the end user in mind. The 4680-04 is loaded with innovation and performance. A built-in Laser Guide, a built-in worklight, and Scrolling feature help the user make accurate cuts. 5.0 amps of power combined with 4-position orbital cut control delivers performance for the most rigorous applications. Your purchase includes 2 jigsaw blades and a carrying case. Product Description- 2-Finger Variable Speed Trigger - 4-Position Orbital Cut Control - 5 Amp Motor - Built-in Laser Guide & Worklight for accurate cutting - Precise Scrolling Action 360º Blade Rotation - Soft-Grip Handle for comfort and control - Tool-less Foot Adjustment Specifications - Cord Length - 6 Feet - Cutting Capacity in Hard Wood - 1 3/8\" - Cutting Capacity in Soft Wood - 2 1/4\" - Cutting Capacity in Aluminum - 1/2\" - Cutting Capacity in Mild Steel - 1/4\" - Max. Bevel Cut - 45º - No Load SPM (Strokes per Minute) - 800 to 3,200 Includes - 2 Blade Pack - Carrying Case PLEASE CALL NORMA at 540 429-3700THIS IS A NEW IN BOX SKIL SAW-PAID $130.00 AT LOWES-SELLING FOR ONLY 55.00 OBOList Price: $130.00 Price: $55.00 or best fair offerYou Save: $75.00 Location: MTVERNON-ALEX 22308its NOT ok to contact this poster with services or other commercial interests

Solid, sturdy wood lathe in good condition. Comes with 5 gouges, skews etc.. 2 face plates and a drill chuck. Location: Springfield its NOT ok to contact this poster with services or other commercial interests Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

Great condition, Everything included Location: Sterlingits NOT ok to contact this poster with services or other commercial interests

Working Push Reel Lawnmower for sale. In relatively good shape with little rust. Location: Arlingtonits NOT ok to contact this poster with services or other commercial interests

Powermatic 18\" Cutoff saw 3Phase 208v 7.5HP 2 saws Available$750.00 Each or make offerContact # 703-772-1000 Location: WOODBRIDGEits NOT ok to contact this poster with services or other commercial interests

*** COLEMAN POWERMATE GENERATOR ***1 MAXA 3000 OHV ELECTRIC GENERATOR - 3000 WATTS - 3750 WATTS SURGE - 5.5 HP ENGINE2 GAS POWERED - 120 VOLTS - 25 AMPS - 2 OUTLETS - GREAT CONDITION! - 1314520013 ONLY $200! - LOCAL PICKUP ONLY AT 6824-B NEW HAMPSHIRE AVE, TAKOMA PARK, MD 209124 ANY QUESTIONS? FEEL FREE TO CALL ROB AT 301-270-5700 OR E-MAIL: kingpawn1@ymail.com Location: Takoma Park, MDits NOT ok to contact this poster with services or other commercial interests

*** CRAFTSMAN 8\" BAND SAW ***1 COMPANION - SEARS - STAND TYPE - 2.2 AMPS - 120V2 NICE CONDITION - MADE IN CHINA - 3900FPM - 1314232013 ONLY $40! - LOCAL PICKUP ONLY AT 6824-B NEW HAMPSHIRE AVE, TAKOMA PARK, MD 209124 ANY QUESTIONS? FEEL FREE TO CALL ROB AT 301-270-5700 OR E-MAIL: kingpawn1@ymail.com Location: Takoma Park, MDits NOT ok to contact this poster with services or other commercial interests

*** DEWALT 12\" COMPOUND MITERSAW DW705 ***1 13 AMPS - 4,000 RPMS - GREAT WORK SAW! - 327752012 ONLY $125!- LOCAL PICKUP ONLY AT 6824-B NEW HAMPSHIRE AVE, TAKOMA PARK, MD 209123 ANY QUESTIONS? FEEL FREE TO CALL GROVER AT 301-270-5700 OR E-MAIL: kingpawn1@ymail.com Location: Takoma Park, MDits NOT ok to contact this poster with services or other commercial interests

Moving sale. Need to get rid of this saw, as were moving into an apartment. Nice, clean, only used 2ce (to install wood floors). Kept in garage ever since. Location: Laurel, MDits NOT ok to contact this poster with services or other commercial interests

NEW IN BOX. 56\" 23 Drawer professional tool chest with heavy duty handles. Features a cam locking system and heavy Duty 5\" Casters. Sturdy commercial quality in rugged stainless steel.Specifications:Ball bearing slide drawers 23 Drawer configuration Pneumatic shock lifts on Top Lid Professional quality Location: dcits NOT ok to contact this poster with services or other commercial interests

Sullair chipping hammer with quick coupler / never used Location: NOVAits NOT ok to contact this poster with services or other commercial interests

*** RYOBI CORNER CAT SANDER CFS1502 ***1 USED IN CASE - GREAT CONDITION - 5-1/2\" - 1 AMP - 328759032 ONLY $20 ! - LOCAL PICKUP ONLY AT 6824-B NEW HAMPSHIRE AVENUE, TAKOMA PARK, MD 209123 ANY QUESTIONS FEEL FREE TO CALL ROB AT 301-270-5700 OR E-MAIL: kingpawn1@ymail.com Location: Takoma Park, MDits NOT ok to contact this poster with services or other commercial interests

OMGA T50-350 14\" Miter Saw 3-phase 3 Hp. $200.00 or Make an Offer 14 saws AvailableValue of saw new $3000.00Please Call 703-772-1000Address is 1041 Cannons Ct. Woodbridge VA 22191 Location: Woodbridgeits NOT ok to contact this poster with services or other commercial interests

Custom Built Machine equipped with a 7 1/4\" worm drive saw excellent condition paid $5600.00 new asking $1000.00 or make an offer Location: Woodbridgeits NOT ok to contact this poster with services or other commercial interests

Lincoln Ranger 9 Welder. \"The Ranger 9 is a twin cylinder gas engine driven, multi-process arc welder, and AC power generator.\" The case is built with heavy gauge steel for durability. This welder can be used for AC/DC stick welding (CC), DC Semiautomatic wire feed welding (CV), AC/DC tig welding (CC), and also offers a 9000 watt AC 115/230 volt, 60 hertz power generator. This machine has four 15 amp circuit breakers for 115V auxiliary receptacles and two 50 amp circuit breakers for 230V receptacles. It is CSA approved. There is an Engine \"ON-OFF\" switch, Engine \"Start\" Push-Button Switch, and \"Polarity\" Switch on the front of the machine. 4844 HOURS WORKS GREAT.ASKING $ 1700.00Specifications: * 18HP @ 3600RPM * 2 cylinder, 4 Cycle, Air-Cooled, Gasoline engine. Aluminum alloy block with cast iron liners, electonic ignition. * 250 Amp AC/DC Muti-process Arc welder with 9000 Watts AC auxiliary power. * 12V battery, 430 Cold Cranking Amps, Toggle Start Switch, Manual Ammeter, Manual Choke. * 9Gal fuel tank * 1.8 Qts. oil CALL GREG AT 304-433-2558 CELL # Location: CAPON BRIDGEits NOT ok to contact this poster with services or other commercial interests

This is a large conduit bender (4 lever arm). I found it in the shed and I have no use for it. It will work perfectly fine for bending conduit. Location: Gaithersburg, MDits NOT ok to contact this poster with services or other commercial interests

THANKS FOR CHECKING OUT MY POST. I HAVE TWO SEPARATE TOOLS FOR SALE, THAT CAN BE BOUGHT TOGETHER OR INDIVIDUALLY. FIRST UP IS A SNAP ON TORQUE WRENCH, PART NUMBER QD3R250. LINK FROM SNAP ON FOR SPECS AND INFO-http://buy1.snapon.com/catalog/item.asp?search=true&item_ID=55264&PartNo=QD3R250&group_id=954&supersede=&store=snapon-store&tool=allI ALSO HAVE AN IMPACT GUN, PART NUMBER AT380, HERE IS THE LINK FOR THIS ONE:http://buy1.snapon.com/catalog/item.asp?search=true&item_ID=77645&PartNo=AT380&group_id=803&supersede=&store=snapon-store&tool=allTORQUE WRENCH IS BRAND NEW, IN ORIGINAL SNAP ON CASE WITH INSTRUCTIONS. SOLD FOR 290.00 I WILL TAKE 240 FOR IT, IMPACT SELLS FOR 180, I WILL TAKE 130 FOR IT. OR IF YOU DECIDE TO GO FOR BOTH, I CAN LEAVE IT AT 350. EITHER WAY, ITS A PRETTY GOOD DEAL CONSIDERING I PAID ALMOST 500 FOR THEM. LET ME KNOW IF YOURE INTERESTED OR IF YOU NEED ANY OTHER INFO. THANKS FOR READING. HAVE A GOOD ONE Location: FAIRFAX, VAits NOT ok to contact this poster with services or other commercial interests

Buffalo Metal Band Saw model hvmbs-4.5. Manufacture date 1984 - 3/4 HP motor (most of these type have 1/2 HP motor) 110V Accepts 64x1/2x1/2 blades (standard for these types of saws) Easily obtained at Tractor Supply.Country of manufacture unknown.Saw is located in the Winchester VA area. Can deliver within 50 miles. Location: Winchester VAits NOT ok to contact this poster with services or other commercial interests

Plaese call if you have any questions 540-419-4864. Location: Staffordits NOT ok to contact this poster with services or other commercial interests

1\" to 2\" dies.Never used!!!!! Paid $1600.00. Please call 540-419-4864. Location: Staffordits NOT ok to contact this poster with services or other commercial interests

Like new in box. Used once on a very small project. Location: Fairfax / Centrevilleits NOT ok to contact this poster with services or other commercial interests

FYI The presence of this ad means items are available. The ad will be deleted as soon as items are sold. [4-way Lug Wrench 20\" $15 ] SAE(metric) sizes 11/16 (17mm), 3/4 (19mm), 13/16 (21mm), 7/8 (22mm), The item is in \"as new\" condition. (used 2 or 3 times) Please pick up at Capitol Hill. Cash only. No checks. We live on Capitol Hill (5 blocks from Eastern Market station) Thank you 902its NOT ok to contact this poster with services or other commercial interests

Sight Level Berger Model 190b Sight Level $125 OBO Location: Laurelits NOT ok to contact this poster with services or other commercial interests

Haven GripThis Riggers Tool is used to manipulate ropes that carry heavy items lifted in large scale stage performances and in shipping/loading.Riggers Wynch/Pully Klein ToolsIt appears to be Solid Brass, whatever its made of its very heavy. Location: Chevy Chase DCits NOT ok to contact this poster with services or other commercial interests

ONE WERNER 6 FT STEPLADDER 360 SERIES # 366 250 LB CAPACITY TYPE 2 RATING VG COND.PRICE IS $ 20.00CASH AND CARRY CAL SUSAN 540-429-3700 Location: STAFFORD,VA 22554its NOT ok to contact this poster with services or other commercial interests

new in box oli drain container for use with lift, aprox 5ft high. 25. call Larry 301 996 8680 Location: gaithersburgits NOT ok to contact this poster with services or other commercial interests

Matco 2 bay tool box, 26 inch customStainless steel topSome of the drawers have been pulled out in order to transport it back to my house from the shop.I had to custom order it and paid around $5,500 for it.This is not a silly sears craftsmen tool box, this is a box for the big boys.You must be able to come get it, I can not help lift it, it weighs a ton.Please have a way to move it.$2100 - OBO703.409.9993 Location: Fairoaksits NOT ok to contact this poster with services or other commercial interests

Delta Saw buck good working condition. 16\" Crosscut capacity, Bevels to Right 50degrees, Miters Right and Left 50Degrees. Location: Winchesterits NOT ok to contact this poster with services or other commercial interests

Emglo Air Compressor model#K5HGA-8P 8.9CFM good working condition we dont use it enough to justify keeping it. 5.5HP gas powered Honda motor, wheel barrow type, $300Firm this is less than half the cost of a new one. Call 540-664-3343 Location: Winchester Vaits NOT ok to contact this poster with services or other commercial interests

Just came out of services. Works great. Priced great!! For viewing arraingements, please call Steve @ (571)238-2068. Cash only/Local pick-up.Thanks! Location: Manassasits NOT ok to contact this poster with services or other commercial interests

I am selling my 1000 watt Kubota Generator. Works great, well maintained, oil changed regularly. Not heavily used. Small and very portable. Perfect for running tools in the field, as a backup generator for summer storms (Ive used it many times to keep the refrigerator going during DC summer thunderstorm power outages). Location: Bethesda MDits NOT ok to contact this poster with services or other commercial interests

10\" Tilting Arbor Table Saw - Shop kept - Good ConditionASKING $1450 OBO - will entertain reasonable offers...no longer have need for saw...PLEASE EMAIL WITH SERIOUS INQUIRES. LEAVE A NAME AND PHONE NUMBER IF YOU WOULD LIKE TO DISCUSS THE SAW AND POTENTIAL TRANSACTION.BUYER WILL NEED TO TRANSPORT SAW & THIS WILL BE A CASH ONLY TRANSACTION - THANKS FOR YOUR INTEREST!the following links will give you a good idea of the saw Im selling. see pictures attached for actual saw being sold. can email additional pictures if seriously interested.http://www.woodnet.net/general/210015-closer.jpghttp://www.tools-plus.com/general-woodworking-machinery-650r-t50-m2m.html?utm_medium=feed&utm_source=froogle&utm_term=G-M650R-T50-M2M Location: LEESBURG, VAits NOT ok to contact this poster with services or other commercial interests

Seven pieces of heavy-duty pegboard, each piece approx. 1 foot by 8 feet and chrome-plated hooks for 1/4\" thick pegboard with large holes as itemized below. $35 for all. 703-368-732346 hooks approx. 8\" long10 hooks approx. 16\" long16 hooks approx. 12\" long 30 Hooks approx. 4\" long8 shelf brackets10 misc hooks 4 1/2 - 12\" long Location: Manassasits NOT ok to contact this poster with services or other commercial interests

9\" Craftsman Drill Press - $9014\" Craftsman Cut-off Saw - $100 Location: Herndonits NOT ok to contact this poster with services or other commercial interests

tool in good working orderasking $100. call Jim @ 703-929-0856. cash only. Location: Lucketts, VA its NOT ok to contact this poster with services or other commercial interests

Great cond. Used for about 1 year. Used Tire company outa business... Also have the Branick Tire Cage for an extra $250. Tire cage new is around $500.00 The EF tire machine is $4000 + new. I want these out of here asap. Please call Steve @ (571)238-2068. Thanks for lookin!! Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Perfect working condition. 9.6 volt drill, works perfect. One new battery that works great, charger, drill and the case. Youll see a 2nd battery in the picture but that one doesnt work well. But the new battery is fine. Location: Bethesda MDits NOT ok to contact this poster with services or other commercial interests

This Shear is in pristine condition. It has been used exclusively on aircraft aluminum, less than .125 thick. The shear blades are still sharp and have never been flipped. This machine was moved from our previous facility, but management has decided to outsource our sheet metal work. The entire shop is for sale including the following: CNC Punch Press, Strippit Single Station Punch, 4 ft Mechanical Press Brake, 55 Ton Mechanical Press Brake and a Rousselle Gap Frame Punch Press. Please contact us at info@macaerospace.com or via fax at 703-502-8303 if you want to purchase the equipment. 12 GA. X 52\" WYSONG MECHANICAL SHEAR MODEL 1252 Serial #P13-1522CAPACITY................. 12 GUAGE MILD STEEL CUTTING LENGTH................. 52\" RAKE OF UPPER BLADE................. 13/32\" MOTOR................. 5 HP 220/440, 3 PH STROKES.................60 PER MINUTE APPROX. DIMENSIONS.................85\" F-B x 99\" L-R OVERALL HEIGHT................. 50\" APPROX. WEIGHT.................5,700 LBS. EQUIPPED WITH: FRONT OPERATED BACK GAUGE FRONT SUPPORT ARMS 6 SQUARING ARMFOOT PEDAL$8,000.00 / negotiable Location: Chantillyits NOT ok to contact this poster with services or other commercial interests

This CNC Punch is in good condition, but has a bad “X” Axis Control Board. It has not been powered up since we moved to our new facility. This machine was moved from our previous facility, but management has decided to outsource our sheet metal work. The entire shop is for sale including the following: Wysong Mechanical Shear, Strippit Single Station Punch, 4 ft Mechanical Press Brake, 55 Ton Mechanical Press Brake and a Rousselle Gap Frame Punch Press. Please contact us at info@macaerospace.com or via fax at 703-502-8303 if you want to purchase the equipment. Make: Strippit Model 75-30 CNC Punch PressCat #: 113042-155-A-BMachine Serial #: 06052881 GE Mark Century 1050Control Listed Power Specifications: Voltage: 208 Phase: 3 Hertz: 60 Punching Capacity: 30 Metric Tons $8000 / negotiable Location: Chantillyits NOT ok to contact this poster with services or other commercial interests

This is a good single station punch. The tooling is interchangeable with our Strippit CNC Punch that is also for sale. This machine was moved from our previous facility, but management has decided to outsource our sheet metal work. The entire shop is for sale including the following: Wysong Mechanical Shear, CNC Punch Press, 4 ft Mechanical Press Brake, 55 Ton Mechanical Press Brake and a Rousselle Gap Frame Punch Press. Please contact us at info@macaerospace.com or via fax at 703-502-8303 if you want to purchase the equipment. Strippit Super 30 Single Station PunchCapacity: 30 Tons Throat: 30\" Table Size: 48\" x 72\" Equipped With: Adjustable Table Height Slide Bar Transfer Punch$1500 / negotiable Location: Chantillyits NOT ok to contact this poster with services or other commercial interests

This brake does not have a back gauge. It has been used as a second-operation machine, equipped with a 4-ft flattening die. This machine was moved from our previous facility, but management has decided to outsource our sheet metal work. The entire shop is for sale including the following: Wysong Mechanical Shear, CNC Punch Press, Strippit Single Station Punch, 55 Ton Mechanical Press Brake and a Rousselle Gap Frame Punch Press. Please contact us at info@macaerospace.com or via fax at 703-502-8303 if you want to purchase the equipment. CHICAGO DREIS & KRUMP 4 Ft Mechanical Press BrakeCapacity: 4 / 11 TON Additional Information: EW: 18 GAUGE Model Number: 131$1,000 / negotiable Location: Chantillyits NOT ok to contact this poster with services or other commercial interests

This is a great brake with a programmable back gauge. It is easy to set up, and can be programmed for multiple bends. This machine was moved from our previous facility, but management has decided to outsource our sheet metal work. The entire shop is for sale including the following: Wysong Mechanical Shear, CNC Punch Press, Strippit Single Station Punch, 4 ft. Mechanical Press Brake and a Rousselle Gap Frame Punch Press. Please contact us at info@macaerospace.com or via fax at 703-502-8303 if you want to purchase the equipment. 55 Ton Dreis & Krump Mechanical Press Brake MODEL: 68B Serial Number: L-14951GENERAL SPECIFICATIONS :Capacity, Tons, Midstroke: 36 Capacity, Tons, Bottom of Stroke: 55 Overall Length: 8 Distance Between Housings: 66\" Stroke: 3\" Ram Adjustment: 3\" Throat: 8\" Strokes Per Minute: 40 Die Space, SDAU: 12\" Bending Capacity: 72\" x 10 Gage 96\" x 12 Gage DRC Programmable Back Gage $7500 / negotiable Location: Chantillyits NOT ok to contact this poster with services or other commercial interests

This machine is in excellent working order and has easy foot trip operation. This machine was moved from our previous facility, but management has decided to outsource our sheet metal work. The entire shop is for sale including the following: Wysong Mechanical Shear, CNC Punch Press, Strippit Single Station Punch, 4 ft Mechanical Press Brake and a 55 Ton Mechanical Press Brake. Please contact us at info@macaerospace.com or via fax at 703-502-8303 if you want to purchase the equipment. Model 3G 25 ton press 3 hp motor 208 / 240 / 480 volt 3 phase.The following specs on this model are believed to be correct - this info is FOR REFERENCE ONLY:Capacity: 25 tons Flywheel type. 2” StrokeStrokes per minute 180 Shut height 7 3/4\"Adj. of slide 1 1/2\"Bed Size 14\" x 20\"Opening in bed: 7\" roundDimensions O.A.: 22\" x 48\" x 76\" TallWeight: 2,000 lbs$1000 / negotiable Location: Chantillyits NOT ok to contact this poster with services or other commercial interests

Attic Dek is the only storage system designed specifically for unfinished attic space. Manufactured in two sizes to fit either 16\" or 24\" standard truss spacing, these lightweight interlocking panels are secured to the attic floor joists using five 2\" flathead screws. Testing has shown that each panel supports up to 250 pounds, providing consumers a safer attic storage system that is both sturdy and durable. CALL INDUSTRIAL LADDER 301-490-0281 Location: WASHINGTONits NOT ok to contact this poster with services or other commercial interests

Watch Brake in acction http://www.youtube.com/watch?v=UWoepxjSv_U106\" Alum-A-Brake – Work 3 to 5 Times Faster! $$$$Almost 3k new, but we are selling it for 1499$$$$$$$No other brake comes close!!! Work much faster - without a pencil. Hems, slits and bends all common material including vinyl coil.Ultima Plus – Our new kwik release table design permits Alum-A-Pole to offer the best brake…at the lowest price in the industry. 20 lbs. lighter too! Replaces all other brakes. Download Ultima Brake Operation and Features Flyer (212k)Save “BIG TIME” on your laborGreater accuracyFor the most part you will NOT need a pencil Hems, slits and bends all common material including vinyl coil. Ultima Plus Includes:• Rigid removable aluminum worktable. Takes only 5 seconds.• 4 Maximizers.• 2 Scissor hands.• Slitter Guide Bar.• Built-in track-mounted slitter.• Power locks permit 1/4\" bends.• Lifetime wearable parts warranty.Options:• Coil Holder – with built-in slitter• Alum-A-Brake Legs.• Alum-A-Brake Wheels.Maximizers – Bend 2 pieces of aluminum coil at one time. Bend and slit a 50’ roll of coil 5”x1”x10’ in under 15 minumtes. Automatically stack all slit pieces on maximizers. Bend a Pro-Trim Post in under 2 minutes. Simply set distances. No pencil needed.Scissor Hands – A fast measuring device designed for single bends and slits without a pencil. Simply place coil on bend or cut side and lock brake for processing.Coil Holder – Fast and easy slitting. Built-in track-mounted slitter means slitter can never drop. Mounts in seconds.Built-in Slitter Guide Bar – lines up pencil marks to slitter wheels. Alum-A-Brake Legs – fit on in seconds, no tools necessary.Alum-A-Brake Wheels – removable in seconds. Grass friendly. Makes brake weightless. Location: Ashburn Virginiaits NOT ok to contact this poster with services or other commercial interests

Performance. What else needs to be said about the worlds finest commercial-grade trimmer ECHOs easy-to-use custom ergonomic controls, lightweight design and super powerful Power Boost Tornado technology gives you the tools to enhance your productivity. Now youll spend less time creating a lasting impression and more time enjoying it.Light-weight, curved shaft trimmer includes our reduced effort i-30 starting technology. 21.2 cc Power Boost Vortex engine. 30% reduction in starting effort. 2-line Rapid-Loader trimmer head. 48\" curved shaft. Premium-grade felt air filter. Heavy-duty, die-cast trimmer head bearing housingCall and speak to Luis or any of our sales associates at (301) 350-6969 KingPawn5931 Martin Luther King Jr Hwy, MD 20743 Location: 5931 MARTIN LUTHER KING JR HWYits NOT ok to contact this poster with services or other commercial interests

* 24\" x 48\" Platform truck with rubber casters* The wood deck platform truck is the most widely used truck in the industry. they are easy to operate built to last and economical. These have a capacity of 2000lbs. Decks are 7/8\" thick and have a sanded hardwood with a natural varnish finish. Casters are supplied with each truck. Handles are removable with and are made from 1\" steel tubing. Item: 61099-R call industrial ladder 301-490-0281http://www.industrialladder.com/ Location: washingtonits NOT ok to contact this poster with services or other commercial interests

Louisville Fiberglass Step Ladder 300lbs. Type 1A #FS1500 Series Da Boot? Patent #7,000,731 B2 Molded Top with Tool Slots Inside spreader braces Double-rivet step construction Wide Back Braces Full channel fiberglass rail FS1502 is a folding step stand and is not equipped with Da Boot? http://www.industrialladder.com/4-$636-$858-$10710-$15912-$197 Location: WASHINGTONits NOT ok to contact this poster with services or other commercial interests

Husky EP-430 Manual Hydraulic Compression ToolThe EP-430 is unique in that it has a large jaw opening of 1 3/16\" and is able to splice up to 600 MCM. This tool was designed for the electrical contractor or electric utility lineman who is confronted with larger cable diameters and larger connectors. Similar competitve tools are limited to a .95\" jaw opening that drastrically reduces their connecting range.SpecificationsOutput: 12 tonsWeight: 13.5 lbs.Length: 24 inchesJaw Opening: 1 3/16\"FeaturesTwo-stage pumping piston for rapid advanceReplaceable, drop-out bypass cartridge for for easy shop repairs180 degree swivel crimping head permits installations in confined areasAccepts all \"U\" type dies used in 12 ton tools on todays marketMagnetic oil reservoir plug to trap metal contaminantsTwist handle release mechanismAsking: $499 or Best Offer!Serious Inquiries OnlyIf interested call: 301-345-0858Or Stop By:4938 Edgewood Road., College Park, MD 20740Mon-Tue: 9am-6pm, Thu-Fri: 9am-7pm, Sat: 9am-4pm Location: OBO, College Park, MDits NOT ok to contact this poster with services or other commercial interests

Knaack Storagemaster Chest #89 KNAACK STORAGEMASTER Chests, the ultimate in jobsite security, lead the way with our innovative WATCHMAN IV Lock System (patent pending). This system will not only save time and money with a one time, one lock installation, Item: 89 CALL INDUSTRIAL LADDER 301-490-0281http://www.industrialladder.com/ Location: WASHINGTONits NOT ok to contact this poster with services or other commercial interests

Delta 10\" table saw, model 36-600, in excellent condition. I used this saw for small household projects, but I moved to a town home and no longer need it.I paid $450 asking $300 firm. This is a cash only sale. Purchaser must pick up. Its the standard for 10\" saws. The bottom line: A star among the lower mid range ($400-$600) for table saws. Reliable, durable, and a good value.22-1/4 x 20-1/2 large cast iron table with two 9\" extension wings Total dimensions: 37\" high, 22.5\" wide, 46\" longMiter gauge is adjustable and stops at 90 degrees and 45 degrees (right and left) Self-aligning T-square fence locks solidly in placePowerful belt driven, 1 HP Motor, 15 amp, 120 volt, 60 HZ, enclosed inside the cabinet to save spaceSee through blade guard with splitter and anti-kickback fingers for safety Mounted on rolling castersInstruction manual, parts list, extra blade, and wrench included Location: Northern VAits NOT ok to contact this poster with services or other commercial interests