15 ft. steel I-beam engine hoist with one ton Little Mule trolley (as shown in yard photo with steel pieces) and two 7 1/2 ft. tall posts with 9\" square base plates welded on. Assembly requires some minor welding to attach square post pieces to I-beam to make slip joints. Comes with two extra base plates which are also predrilled 4 x 1/2\" for making an extra set of supports in a different location. Both I-beam and posts are mild steel and can easily be cut with a sawzall if the dimensions need to be changed to fit your work area. Location: Falls Churchits NOT ok to contact this poster with services or other commercial interests

never used. 703.554.4945 or email at sahern6488@email.vccs.edu Location: loudounits NOT ok to contact this poster with services or other commercial interests

We are your Toro Dingo dealers in this area. Besides selling Toro Dingos, we rent them as well. These hydrualic power plants fit in to spaces that larger equipment cant access (like backyard fence gates). The Toro Dingo track design has a light footprint leaving minimal grass disturbance. An easy quick attach system allows operators to drop one attachment (like a bucket) and pick another up in less 30 seconds. Our rental Dingo comes with a platform to stand on that easily folds up out of the way if you would prefer to walk behind the machine. Our rental Dingo is TX 525 diesel tracked model, which gives you that added muscle for digging and to the attachments.Rent a Dingo and a bucket too:-move dirt, rock, mulch, sand etc.-dig into existing ground (for ponds, grading, backfilling etc)-Remove small stumpsAdd the auger attachment to:-dig holes quickly for fence post, trees, shrubs, etcAdd the trencher attachment to:-trench for french drains-trench to add utility lines-trench for outfalls for your down spoutsAdd adjustable forks to:-move heavy rocks around -move pallets of heavy materials-move trees around before plantingAdd the cultivator to:-till up large areas-soil preps yards to lay seed (eliminates hand raking)-breaks up clumps of dirt and grades yardsThis machine is very easy to use and one of our representatives will not leave the jobsite until you are comfortable with using the machine.We are also available to do the work for you.We have optional pick up and drop off service available. We have weekly and monthly rental discountsWe are located in Manassas but rent all over. For more info callTrey703 919 5291www.esequipmentllc.com Location: Nova,DC,MDits NOT ok to contact this poster with services or other commercial interests

FYI The presence of this ad means items are available. The ad will be deleted as soon as items are sold. [4-way Lug Wrench 20\" $15 ] SAE(metric) sizes 11/16 (17mm), 3/4 (19mm), 13/16 (21mm), 7/8 (22mm), The item is in \"as new\" condition. (used 2 or 3 times) Please pick up at Capitol Hill. Cash only. No checks. We live on Capitol Hill (5 blocks from Eastern Market station) Thank you 902its NOT ok to contact this poster with services or other commercial interests

- Vacuum: Craftsman Wet-Dry 1.75HP 6-Gallon on Wheels with hose $20 Location: Burkeits NOT ok to contact this poster with services or other commercial interests

This gun in great shape has the battery charger and the gun in case can meet in metro area for pickup 304-616-8291 Location: DMVits NOT ok to contact this poster with services or other commercial interests

This set is new never out of box includes hammer drill driver and impact with 2 lithium batteries and charger with case 304-616-8291 Location: DMVits NOT ok to contact this poster with services or other commercial interests

Sencore Slm 1453I ----------------------------------------------Retail $ 449.99Psiber cable tool (TDR) Model 50------------------------------- Retail $ 274.99Lil Buttie Pro LB220---------------------------------------------Retail $ 159.99Fluke Impact tool-------------------------------------------------Retail $ 59.99Steren 568 - Deluxe Crimper for RJ11, RJ12 and RJ45 ----------Retail $ 29.99Monarch Can Wrench--------------------------------------------Retail $ 11.99Deluxe Cable/Phone Tech Tool Bag w/ 24 slot tray on ------------Retail $ 99.99 Total= $1085.95bottom w/ Shoulder strapAND all other tools seen... Ethernet / Phone line connection tool w/ pouch(Made in China)(uses 1 9V battery) -(I used to make my cat 5 cable and 1 or 2 of my wires would not be connected. I would finish my job and get ready for my test call and NO TONE!!!! Until i brought this connection tool from a Chinese instructor. This device insures you that ALL your Cat 5, RJ11, RJ12 and RJ45 wires are crimped properly. You can tone Cat 5 ect. from the basement to the top floor. Its really good for offices with multilines using ethernet cabling. If you have 6 or more ethernet cables running to your central station in the basement utility room and non of them are labeled, how can you tell which cable goes to which room. You better be in shape cause youre gonna do alot of back forth, up and down the stairs! UNLESS you have this tool. This tool comes in 2 parts that connect together for storage but when yore ready to use it, attach the main base to your line to be toned, go to the receiving end, plug in all wires/cables until the toner lights up. MAKE SURE THAT, HOW EVER MANY LINES YOU USED FROM YOUR CAT 5, THAT THEY ALL LIGHT UP!! if you do, then you might have just save yourself 20 min. to an hour time of trying to find the right cable line. EnjoyIm selling cause I dont do this profession any longer and its just sitting. I figured a GOOD tech could use it.***SERIOUS INQUIRIES ONLY PLEASE***240-346-7033 Location: Waldorfits NOT ok to contact this poster with services or other commercial interests

Impact Acoustics RG6/U Dual Shield In-Wall Coaxial Cable is ideal for antenna, cable television and satellite installations. This cable is composed of an 18AWG copper-clad steel-center conductor surrounded by a foam polyethylene dielectric. A bonded aluminum foil and 60% aluminum braid provide 100% shield coverage. Meets specifications for CL1, CL2, CM, CMX and CMG installations. Swept-tested to 3GHz to ensure performance at applicable frequencies. To help you keep track of cable used, the cable jacket is sequentially marked every two feet. * 18AWG copper clad steel center conductor * 60% aluminum braid over foil providing 100% shield coverage * Foam polyethylene dielectric * CM/CL2-rated PVC jacket * Swept tested to 3GHz * Sequentially marked every 2 feel * Inner Conductor: 1/1.02 mm (18AWG) copper clad steel * Insulation: 4.57mm Foam PE * Outer Conductor: Al/P-Foil (Bonded) + 0.12mm x 80 Al wire braiding * Coverage: 60% * Sheath: 6.88mm WHITE PVC (C/UL CMG CL2) * Ideal for RF applications like outdoor TV antennas and cable television***SERIOUS INQUIRIES ONLY PLEASE*** 240-346-7033 Location: waldorfits NOT ok to contact this poster with services or other commercial interests

Delta DC-33 planer. 13\" x 5.9\" capacity. 2hp, 220v, single phase motor. Original owner. Includes owners manual, leg set with casters, in-feed/out-feed roller tables and extra set of knives. Excellent condition. Reason for selling - bought a larger planer. $600 Location: Near Richmondits NOT ok to contact this poster with services or other commercial interests

Selling my Paint machine. I never got the chance to use it. My loss is your gain. Retails for over $230. Uses HI pressure to spray like the High dollar commercial units do. I am in Frederickburg, Va just minutes from I95. You can call me at 540 273 8827. Thanks. Wagner Paint Crew comes with everything shown in picture. Location: Fredericksburgits NOT ok to contact this poster with services or other commercial interests

Up for Sale: \" I have the small Shop Vac which works good ! \" The first one is a big 50 Gallon Craftsman Vac. It has been sold already. The smaller one is pretty neat, it latches into a standard 5 Gallon bucket. It also works great, but is missing the hose and wand, which can be used off another vaccume with a small diameter type hose.$30 * * * * * Note : If you want to see or buy this item, E-mail us with your NAME and PHONE NUMBER. People who send their number will be given priority over those who just e-mail asking if the item is still available, then are never heard from again. If it was already sold the AD would not be here. * Give the Pictures below time to load. If you see boxes with X marks instead, just hit refresh till you see the pics. They should all be there. If still you cant see them your firewall or internet security must be blocking them. E-mail me, and I can send them to you directly via e-mail... or I can send you my website address so you can go scroll through all my pictures yourself. * General Disclaimer: This item is likely Used, and sold as is with no warranty. Buyer is encouraged to inspect the item for themselves, as the description above is just the sellers personal, honest, evaluation of the item, and may not be complete, 100% accurate, or cover all asspects that are important to all buyers. No returns or refunds will be given after the transaction is made. Location: Springfield, VAits NOT ok to contact this poster with services or other commercial interests

Harris compressed Gas Regulator \"Shielding Gas Kit\"model No. 201-AR/CD60(slightly used, like-new)comes with extra valve attachment and gas line hose. Location: colesvilleits NOT ok to contact this poster with services or other commercial interests

Resin 5-shelf garage stand 32\"W x 70\" H. Could be taken apart or moved in a truck - $25 Cash only please.Buyer is responsible for moving item. Does not include items on shelves shown in picture. Location: Rockville, MDits NOT ok to contact this poster with services or other commercial interests

These are three brand new, never used Porter Cable pneumatic tools which came bulk packaged.BN125A 18guage brad nailer $60 (Amazon $90)NS100A 18guage narrow crown stapler $70 (Amazon $101)FN250b 16guage finishing nailer $140 (Amazon $196)ALL THREE! $225 Location: Rockvilleits NOT ok to contact this poster with services or other commercial interests

** NEW ** Black & Decker Titanium 150 Pieces Drilling & Screwdriving All the info should be on the picture of the box. Location: Leesburg, Bethesdaits NOT ok to contact this poster with services or other commercial interests

Ridgid Electric Snake similar to the K-400 model at Home Depot for $499 Call Golden Construction at 703 968-2755 to make an appointment to visit.E-mail cg@goldenci.com if you wish to see a list of other tools and equipment we have to sell. Location: Chantillyits NOT ok to contact this poster with services or other commercial interests

12\" two speed band saw1 1/8 HP, 6\"deep of cut, tilt blade 0-45o , work surface 23\"x27\", 80\"Blade, 1/2\"sanding belt, built-in work light, bevel angle tilt head, electricity 110 to 115 volts. Call to 703-763-1703 Location: Manassasits NOT ok to contact this poster with services or other commercial interests

Craftsman Radial Arm Saw with Stand Location: Springfield VAits NOT ok to contact this poster with services or other commercial interests

Model 705 12\" miter saw with a sturdy Dewalt miter saw stand model DW730 in good condition. Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

Sturdy solid saw with cast iron top in good condition. Comes with tennon jig. Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

Hand truck with continuous handle is functional and built to last. Heavy-gauge tubular steel frame with welded joints for extra strength, 14\" x 7\" toe plate and 8\" solid rubber wheels with ball bearings. Black baked enamel finish. Location: Springfieldits NOT ok to contact this poster with services or other commercial interests

UP FOR SALE: CARPET KNEE KICKER #612 AND ORCON KOOL TOP HEAT SEAMING IRON.THESE TOOLS ARE IN GOOD WORKING CONDITION. BUYS BOTH FOR $50.00 OR $30.00 EACH.BUYER PICK IT UP AT BALTIMORE MARYLAND CLOSE TO MONTGOMERY WARD BUILDING.410-935-5696 Location: BALTIMORE,MD its NOT ok to contact this poster with services or other commercial interests

Wet Saw For SaleI used this saw to do one job and then put it in my garage. Well that was three years ago and now it has to go. I know I will need it the minute it is gone but anyway. It is not for the professional, but perfect for the homeowner who has some projects around the house. It is certainly better than scoring and snapping the tiles. It is in good condition. $40 or best offer Location: Arlington, VAits NOT ok to contact this poster with services or other commercial interests

we are selling these brute heavy duty trash cans they have been barn kept and are in good shape we have 30 or 40 of them some have tops some dont we are asking 10 each or best offer please call ( 240 ) 464-2564 melvin thanks Location: brandywine mdits NOT ok to contact this poster with services or other commercial interests

Up for sale is a drill press machine.Works great. Trandesman Make.5 speed 8\" drill press.Must arrange for pickup.please call 703 717 2325 with any questions Location: fairfaxits NOT ok to contact this poster with services or other commercial interests

we are in the process of selling alot of stuff around the farm due to cancer. we are located in brandywine md my dad bought these new for $2100 they are only a couple of years old we have used it for all kinds of stuff pick-up trucks, vans, cars, skid loaders and farm tractors what ever you need a ramp for these do the job excellent please call melvin at ( 240 ) 464-2564 Location: take a look nice its NOT ok to contact this poster with services or other commercial interests

Tool sharpening equipment 12,000Complete Foley - Belsaw sharpening business. Not junk like \"The Drill Doctor\", real top quality equipment.You can sharpen everything except for the very small and very large. I had run this as a business for many years. The equipment is currently setup for carbide tipped blades. knifes, sizzors router bits, end mill ends (no flutes), chain saws. All machines can be run off one 20 Amp house circuit.Too much equipment to show pics of it all. Best if you stop by. Can be setup in about 80 sq ft, but will be tight. Weekly cash gross is between 100 to 500. It all depends how motivated you are. Average is around 60.00 per hour. I started sharpening when I was 17 in Connecticut. It is know in a shed in my back yard, only some of the machines are setup. Well over $30000 if purchased new. Greg540-878-6551 Location: Novaits NOT ok to contact this poster with services or other commercial interests

Iron Force Series, Model #DP461500AJ, 240v/60Hz/1PH, 7.0 hp, 60 gallon. Excellent condition. Location: Davidsonvilleits NOT ok to contact this poster with services or other commercial interests

Rim Shop Stools, $600 CASH!! 540-270-6782 Location: 22724 Jeffersonton, vaits NOT ok to contact this poster with services or other commercial interests

Your child will get an A+ on their Science project with My First Lab Microscope is an educational investment which encourages students to increase their science knowledge by independent study. The My First Lab Monocular Microscope from C & A Scientific Company is a real working microscope equivalent to those used in intermediate and high schools worldwide. This microscope includes a vinyl dust cover, instruction manual and 5 prepared microscope slides ready for observation. Features: Monocular Head inclined for comfortable viewing 10X Eyepiece with built in pointer Revolving nosepiece \"Locking\" nut when positioned prevents stage from colliding with objectives Objective Lenses 4X, 10X & 40X power Easy grip focus knob Spring loaded stage clips 6 hole disc diaphragm rotatable to control amount of light on specimen 15W illuminator Built-in rechargeable battery and detachable AC power cord. Designed especially for students Ages 11 and up. The Museum Tour Science Kit has everything you need to do any kind of science project. Everything from the mini microscope and slides to the observation charts to the thermometer. Will sell both for $150.00. Will sell My first Microscope for 125.00 WIll sell Science study kit for 25.00 Location: rappahannockits NOT ok to contact this poster with services or other commercial interests

Selling a 28 ft X 18 inches wide aluminum extension ladder. This is a great ladder for cleaning gutters on two or three story houses. The ladder also comes with a pulley for a rope. Nice sturdy ladder for roofing. This ladder sells for $330.00 to $350.00 retail. Selling this ladder for $125.00. Location: Indian Headits NOT ok to contact this poster with services or other commercial interests

Very nice garage kept Location: Fairfax Station, Vaits NOT ok to contact this poster with services or other commercial interests

Garage kept Location: Fairfax Station, Vaits NOT ok to contact this poster with services or other commercial interests

Denso Moving Cooling Spot - Portable A/C Unit - 10 SFU - 110V - $400 or best offer. Please e-mail lirf312@aol.com Location: Catlett, VAits NOT ok to contact this poster with services or other commercial interests

AlumaPlank Scaffold Planks by Werner 2 - 7 X 19 1/16\" w/ guard - $150 each or best offer 6 - 6 X 19 1/16\" w/ guard - $140 each or best offer 4 - 5 X 19 1/16\" w/guard - $130 each or best offer 2 - 4 X 19 1/16\" w/guard - $100 each or best offer 9 - 3.5 X 19 1/16\" w/guard - $80 each or best offer Please e-mail lirf312@aol.com Location: Catlett, VAits NOT ok to contact this poster with services or other commercial interests

14\" wet/dry floor brush attachment for most any Ridgid shop vac (2 1/2\" hose)Never used Location: Baileys Crossroadsits NOT ok to contact this poster with services or other commercial interests

A Makita 16\" circular saw. $600 new. We have an extra blade and the blades are still available at Home Depot or LowesCall Golden Construction at 703 968-2755 to make an appointment to visit.E-mail cg@goldenci.com if you wish to see a list of other tools and equipment we have to sellWe also have a 13\" saw for $100 with blade. I couldnt find new 13\" blades. Handy for cutting 6 x 6s Location: Chantillyits NOT ok to contact this poster with services or other commercial interests

Ridgid Model WTS 2000L with work stand. $500 new at Home DepotPlease call Golden Construction at 703 968-2755 to make an appointment to visit. Location: Chantillyits NOT ok to contact this poster with services or other commercial interests

Grow your business with the right tools in the right space. Prime location in heart of Rockvilles Southlawn Industrial Center, close to Industrial Finishes/Grainger/Fisher Lumber. Partial list of tools:Festool chop saw and Festool CT vacHolzer 120\" vertical panel sawRikon 18\" resaw bandsawPowermatic 66 TablesawSCMI edgebanderPowermatic ShaperPorter Cable router tableGrizzly 8\" spiral cut jointerGrizzly 15\" PlanerGrizzly 24\" double drum sanderPorter Cable upright compressorKreg Pocket Hole machineRockwell Drill pressSpray booth* Excellent mix of natural and flourescent lighting. * Large, double bay loading dock * plenty of outlets and piped air * Clean, well organized shop, with dust collection at all machinery * Healthy environment, using only waterborne finishes* Monthly usage : 985.00 + 1/2 utilitiesplease call Jed at 301 523 0350 to set up a visit, or www.jeddinger.com for e-mail link. Location: Rockvilleits NOT ok to contact this poster with services or other commercial interests

Mosquito magnet PRO cordless with built-in solar panel. Operates on CO2 and has a digital panel to tell you what its doing. This is the most effective mosquito control device available. Used only one season and I’m selling because we are moving.This unit cost over $1,200 and is in excellent working order. Location: Fairfax Cityits NOT ok to contact this poster with services or other commercial interests

Garage kept Location: Clifton, Vaits NOT ok to contact this poster with services or other commercial interests

Heavy duty weed eater!!!!!!!!!!!!!!!!! Location: Clifton, Vaits NOT ok to contact this poster with services or other commercial interests

withh mask and many welding rods Location: Clifton, Vaits NOT ok to contact this poster with services or other commercial interests

Carbide blades very nice!!!!!!!!!!!!1 Location: Clifton, Vaits NOT ok to contact this poster with services or other commercial interests

Very nice , can get the job done!!!!!!!!!!! Location: Clifton, Vaits NOT ok to contact this poster with services or other commercial interests

Huge “C” Clamps, Two (2), Largest is 14.5” long, nearly 25 lbs, opens over 8”, Heavy Service Clamp, made by J.H. Williams & Co., drop forged in USA, No. 8 Vulcan. Second one is 7.25\" long, and over 6 lbs., also very heavy duty; made in Chicago, USA, but cannot make out the name, maybe Armstrong, but can clearly read Chicago, USA. Both are Very usable and very collectible. $35.00 cash. We are a non-smoking household. Since we do not get our email everyday, the cell phone is much faster than email, call Bob, usually available from 9am to 9pm, at 240.286.2987, in Riverdale, MD, close to the University of Maryland. Location: Riverdale, MDits NOT ok to contact this poster with services or other commercial interests

$40 OBOWas purchased last year to install the hardwood floors. Hasnt been used since.Most of the wet-dry vacuums sold at big-box stores are the RIDGID brand built by Ridge Tool Co. At the starting end of their lineup is the WD0635, which is a basic vac at a low price that has features found in more expensive models. If youre looking for an affordable model, this one may be enough for your shop.The Emerson motor in the WD0635 draws 7.3 amps (2.5 peak hp). The 6-gallon tank is adequate for smaller jobs, and the units weight (without debris) is less than 15 pounds. Four swivel casters make it relatively easy to move the vac around the shop or basement. We like that the short, squatty design helps prevent knocking over this vacuum during use. The electric cord is 10-feet long, which should be sufficient for most shops. If not, you can always connect the vac to an extension cord.The collection hose is 7-feet long, which is a standard length among wet-dry vacs. There are two extensions and a single utility nozzle. Whats nice about the RIDGID WD0635 over other low-end wet-dry vacs is that this model includes a filter -- and a good one at that. Rather than just foam and paper, the filter on the WD0635 is a pleated paper cartridge guaranteed to catch more debris than cheaper filters. That means your motor will last longer and you wont be breathing as much exhaust dust while you clean up.Cash Only, You must pick up. Location: Piney Orchard MDits NOT ok to contact this poster with services or other commercial interests

Assembled, used once, disassembled, cleaned, and stored on a shelf. More info on the product. Location: Gaithersburgits NOT ok to contact this poster with services or other commercial interests

New, never used , purchased it and its just been sitting in my tool box ..... heres website with specs and info .. http://hand-tools.hardwarestore.com/69-406-staple-guns-hammer/hammer-staple-tacker-with-holster-636325.aspx ... only asking $25.00 .. thanks for reading Location: baltimore,mdits NOT ok to contact this poster with services or other commercial interests

We have two batteries! One is brand new, the other gently used. We thought that the battery was broken and continued to buy new ones until we realized that it was the drill that needed to be fixed. Now we need to sell the batteries. Our loss is your gain.A Super Tough 9.6 Volt Ni-Cad Battery with 1.3AH. Delivers superior run time and is compatible with all MILWAUKEE 9.6V Super Tough Cordless Driver Drills. Use with the 48-59-0192 120 Volt One Hour Charger or the 48-59-0172 12 Volt Vehicle Charger.Specifications: * 1.3 amp hour battery * No memory effect - Full battery capacity is always available * Ni-Cad battery * For use with Milwaukee 9.6 volt cordless toolsThese sell for $60 online. We are selling both for $45. Location: Mount Pleasant, NWits NOT ok to contact this poster with services or other commercial interests

Retired car mechanic is selling his tool set. The complete tool set is worth over $13,000. Comes with multi-layered/stack on tool boxes.Please call for a viewing or email for more pictures. Serious inquiries only. Location: Fairfax, VAits NOT ok to contact this poster with services or other commercial interests

Milwaukee Super Chargerfor charging battery pack in 1/2 HourModel # 48-59-0165They sell this online for $65. We are selling for $30. * 9.6-volt DC * Features advanced electronic voltage and thermal sensing circuitry to protect battery life * Maintenance mode keeps the battery fully charged while docked * Charges Milwaukee cordless drills in only 30 minutes * Bright LED lights indicate charging status at a glanceWe are also selling two 9.6 batteries for the Milwaukee drill. Model number 48110080. One is brand new, the other gently used. They sell for $60 each. We are selling both for $45. * 1.3 amp hour battery * No memory effect - Full battery capacity is always available * Ni-Cad battery * For use with Milwaukee 9.6 volt cordless tools*picture is of the newest model Location: Mount Pleasant, NWits NOT ok to contact this poster with services or other commercial interests

I purchased this Supermax YCM30 to machine motorcycle and cars parts as a hobby. Unfortunately, my friend that was going to teach me how to operate the machine got sick and passed away. Since then, the machine has sat and I want to make some room in my shop. I am attaching a picture showing the machine and to the left on the ground is the phase converter. If you have any questions, Ill do my best to fill in the blanks. Please remember that I am not the expert; my friend was the one with all the knowledge. Heres what I know: The machine is a 1988 Supermax YCM30 with an Anilam Crusader M Controller. The machine was damaged in shipping (cables crushed) and when it was being unloaded it fell over. The table step motor bracket was broken and replaced with a new factory bracket. The CRT screen and a PC board in the Anilam Controller were replaced because they were damaged in the fall. I had the Anilam Controller repaired and checked out by a certified repairman in Florida. When we looked at the machine we thought that only two motor cables were crushed in shipment. So, the two cables were repaired (by a friend) and we didn’t realize other cables were damaged till we tried powering up the machine. I now get a \"Servo Error\" on the CRT screen when the machine is powered up. I have been told by an Electronic Engineer that the step motors on this machine require a signal to the motor back to the controller. The error Im receiving indicates that a wire or wires may be damaged and one of the signals is not being received. I am not aware of any other damage to the machine and the machine is being \"SOLD AS IS\". So, please make sure you know what you are buying because there will be no refunds. Below is a brief description of everything I have for the machine1988 Supermax YCM 30 (sitting on pallet)Anilam Crusader M Controller and programming manual. Wiring diagram of machine.9\" X 42\" table 7.5hp 3Phase converter (designed for electronic equipment)Bobcad Version 21 with training CDs & manual (has three seats)Cat 30 Tool Holders 3/16, ¼, 3/8, ½, 5/8, ¾, 7/8, 1\"6\" Vise (Kurt look-alike)Vise Parallel bar Set ½ to 1 5/858 piece hold down set20 piece End mill set 3/16 to ¾8 piece Corner rounding end mill set 1/16, 3/32, 1/8, 5/32, 3/162 edge findersKeyless chuck and arbor5 piece center drill bitsIm asking $4,500.00 OBO for the complete package and I am not interested in selling any of the above items on an individual basis. Let me know if you have any additional questions or want more pictures please let me know.Thanks,Brad Cell 240-731-9338 Location: Woodbineits NOT ok to contact this poster with services or other commercial interests

utility carts for sale Location: brookeville, md 20833its NOT ok to contact this poster with services or other commercial interests

Think ahead. Winter is coming again and you might be looking forward to clean your driveway with this as good as new snow blowing machine.Cash payment and pick up only Location: Potomac MDits NOT ok to contact this poster with services or other commercial interests

As good as new leafs blower. Works on gasoline.Cash payment and pick up only. Location: Potomac MDits NOT ok to contact this poster with services or other commercial interests

Push Craftsman Lawn mower with bagger21 inch cutmulcher / bagger6.5hp easy start, quiet motorStarts on first pullBlade just sharpenedWe think it was bought in 2004. My Mother used it in a very small yard. Typically it took less than 10 minutes to cut.Call or email 703 569 5021 Location: Springfield, VAits NOT ok to contact this poster with services or other commercial interests

* Economical back tube frame suitable for most applications* Our BIL-JAX drywall carts can handle up to 2500 pounds* Comes complete with 4-8\" hard rubber casters 2-swivel 2-rigid* 46-1/2\" high* 40-1/2\" long* 44\" x 12\" trayCALL INDUSTRIAL LADDER 301-490-0281.http://www.industrialladder.com/ Location: WASHINGTONits NOT ok to contact this poster with services or other commercial interests

$4,195.00 or trade. Would consider financing for an established business with references.This is a variable speed test bench that is capable of performing a full dynamic test on all alternators up to 200 amps including aircraft and locomotive. In addition, it will test the new 42 volt charging systems on motor vehicles.Alternators above 200 amps can be tested also however if you load it to above 200 amps, you start to exceed the ability of the 7-1/2 HP motor and the carbon pile. This bench is approximately fifteen years old and has been in storage since 2001. Jimco’s philosophy is “We DESIGNED it, we BUILD it, we SUPPORT it!” The MRP on this bench when it was built was approximately $12,000.00. I do not know what the current price would be.This test bench was custom built for me, to my specifications. I have extensive hands on experience using this machine, and my knowledge of the operation of this piece of equipment conveys with the sale.There is no other bench made that is as versatile or capable as this one.This bench was designed for high quality, high production alternator rebuilding shops. The manufacture has an excellent reputation, will readily support this machine and actually has a policy of handling all phone calls without voice-mail. The manufacture will still build an almost identical bench to this day and will most definitely sell you the most up-to-date information and adapters to test current as well as future alternators as they are released.Any parts that might ever be needed for this machine are available from the manufacture as well as many of the more common parts being available from your local Grainger store. The variable speed feature assures that while performing your test you can verify that the alternator will be able to keep up with the vehicle loads at idle as well as any other rotor speed. Location: Manassas, VA20143its NOT ok to contact this poster with services or other commercial interests

\"In Sink Erator\"... Food Waste Disposer, Used but still have box, parts, and directions. Please call Bill: 301-237-3862 Location: Columbia, Marylandits NOT ok to contact this poster with services or other commercial interests

Gunline Tools Spec C-55 Series Checkering Set – includes five tools, instructions and ruler. It is the same at Gunlines Leader set with an extra tool.Gunline Tools 2008 price guide shows the 4-tool set as $48.50, with an additional tool costing around $13.A similar set sold on eBay June 19th for $54.71 plus shipping.See the other items I have on craigslist by searching for “Newington/Springfield”. Location: Newington/Springfieldits NOT ok to contact this poster with services or other commercial interests

Manual 4TON Hydralic Service Dolly Type Jack Low 5-1/4 in High 26 in NEW never used still in crate 205 lbs Location: Alexandriaits NOT ok to contact this poster with services or other commercial interests

**** Best offer ****NEW new NEWMens Cotton overalls by Bercoware 4X Large NAVY BLUE JUMPSUIT COVERALLS Location: Bowieits NOT ok to contact this poster with services or other commercial interests

J.D. Wallace shaper, 3 phase, 2 hp. ¾ inch spindle. Fence and one cove cutter bit included. Work area is 20\" X 30\". Heavy cast iron frame, feet bolted to a wood base. Im moving, so it MUST go.To see the other items Ive posted, please search for \"Newington/Springfield\". Location: Newington/Springfieldits NOT ok to contact this poster with services or other commercial interests

Heavy duty vintage tool set. Item weighs 30 pounds -- tool bar for dies is 24\" long. The wooden case measures 34” x 10” x 2½”. [[[[[See the Greenlee set currently on ebay for a comparison (wood case, weighs 30 lbs.) -- with a Buy It Now price of $249 plus $38 shipping.]]]]]My tap & die set was manufactured by S.W. Card Mfg. Co. of Mansfield, Mass, a division of Union Twist Drill Co. Label says, “The Card Quality Set No. 522. No. 500 Paragon screw plates.” It lists 16 cutting sizes.It has SAE Std. and U.S. Standard (USS) size dies from ¼” to ¾.” Missing are two dies (¾-16 SAE and ¾-10 USS). It has: SAE taps: ¼-28, 5/16-24, 3/8-24, 7/16-20, ½-20. USS taps: ¼-20, 5/16-18, 3/8-16, 7/16-14. It is missing these taps: SAE: 9/16-18, 5/8-18, ¾-16. USS: ½-12, 9/16-13, 5/8-11, ¾-10.See the other items I have listed by searching for \"Newington/Springfield\". Location: Newington/Springfieldits NOT ok to contact this poster with services or other commercial interests

Scaffold Rolling Tower 6 High 29\" X 6 Deck W/ U Locks - Brand new, pkup only, its heavy - 165 pounds Heavy, if interested please email me at ahawesome at yahoo. Home Depot price $495ThanksPost big pictures on craigslist with CraigsPic.com Location: Springfield, VAits NOT ok to contact this poster with services or other commercial interests

They are $15 each, take all 3 of them for $40.00i have 2 dollys -- the tires either need air or a replacement intertubeplus a 4 caster roller square - trashcan rollerfirst one over gets pick Location: viennaits NOT ok to contact this poster with services or other commercial interests

1- 48” L x 24” W x 20” H 13 cubic ft $65.001- 48” L x 24’ W x 24” H 16 cubic ft $75.001- 36” L x 17” W x 18” H 6.4 cubic ft $70.001- 36” L x 19” W x 17” H 6.7 cubic ft $85.00 Location: Brookeville,MDits NOT ok to contact this poster with services or other commercial interests

two 4 ladders rated at 250lbs for $25.00 ea., two 6 ladders rated at 250 lbs for $35.00 ea., two 8 ladders rated at 250 lbs for $45.00 ea.,three 10 ladders rated at 300 lbs for $85.00 Location: Brookeville, MDits NOT ok to contact this poster with services or other commercial interests

Up for sale is an engine stand.750 pound capacity.Call 703 717 2325 for viewing Location: Fairfaxits NOT ok to contact this poster with services or other commercial interests

Delta Sawbuck Frame and Trim Saw with folding legs. Works well! Takes a 8 1/4\" blade. Includes an extension to support long boards while cutting. Very useful tool for framing jobs! Weve finished building our house and have no need or room for it anymore. One of the leg supports is slightly bent, but it sits level with no problem. Location: NW DCits NOT ok to contact this poster with services or other commercial interests

Table saw stand for sale- fits 10in table saws. Like new. Location: Potomac Fallsits NOT ok to contact this poster with services or other commercial interests

Stanley 93-292 FatMax Mobile Project Center 33-Inch Tall Clamping Work Bench and Hand Truck. New in the box. $60 CASH onlyFrom the Manufacturer2-in-1 portable work center - clamping work bench and hand cart. Hand cart: designed to carry 220-pounds. Work surface: 660-pound load capacity. Work surface: 660-pound load capacity. Surface height: 33-inches. Clamping mechanism is easily adjustable with rotating handles. Versatile clamping with multiple peg holes. Electric power capability; 3 sockets and cable holder. Innovative folding mechanism. Telescopic cart handles are ergonomically designed and retract below the work surface when in the work bench position.Product DescriptionFatmax, Mobile Project Center, Versatile 2 In 1 Product, That Easily Transforms From An Innovative Workbench To A Durable Hand Cart, Engineered For Work Around The Home Or On The Job Site, Designed To Exceed User Expectations, Fatmax Mobile Project Center Has A Work Surface That Supports 660 LBS & A Scoop Designed To Carry 220 LBS, Also Has 3 Electrical Sockets & A Cable Holder, When Folded, A Stable Project Center Can Easily Be Stored In Tight Spaces Or In The Back Of A Car, Truck Or Van. Location: Manassas Parkits NOT ok to contact this poster with services or other commercial interests

Four shop lights$25 each. - includes fixture, chains and hooks, 2 bulbs four foot flourecent.All are in very good condition. Location: Front Royalits NOT ok to contact this poster with services or other commercial interests