nice wheels 100 set of 4 half doors tan good 100 call 413 528 4429 thanks Location: 01230its NOT ok to contact this poster with services or other commercial interests

i have a brand new never used hks blow off vlave $175 firm dan 203-758-8573 or 203-233-3337 Location: WATERBURYits NOT ok to contact this poster with services or other commercial interests

New Curt Mfg. trailer hitch,I believe it fits Ford. It takes a standard 2 inch reciever, the center to center across the frame mounts are approx.33 inches, asking $75.00 o.b.o. For any questions call 860-283-4622 its NOT ok to contact this poster with services or other commercial interests

ep Wrangler YJ Hardtop (tan) rear defrosters, wiper, & window washer, all work. Mint condition. hardware included. No problems. Full doors, one scratch on passanger side door and paint is chipping on the driver-side mirror. No problems with doors. Paint is clean (Green) E-mail me at Trevoristheman@gmail.com if your are interested or if you would like some more pictures I can also be reached at (860)782-1284. I will consider reasonable offers. I am asking 600 for both top and doors. I have to sell because I let go of my jeep and still have the full doors and hardtop. If you are serious I can E-Mail you new pictures Location: Litchfieldits NOT ok to contact this poster with services or other commercial interests

4 Wheel Vintiques Chrome Rims2-15x7 Ford Pattern2-15x5 Chevy PatternLike New $150860-496-7511its NOT ok to contact this poster with services or other commercial interests

FREE!!! Left Front Fender From a 95 Jeep Grand Cherokee LaredoGreenCall Tom 860 459 7000 Location: Torringtonits NOT ok to contact this poster with services or other commercial interests

FREE!!! Come pick it up.LEFT Rear Door from a 1995 Jeep Grand Cherokee Laredo.Green Includes glassPower window switches are missing.Call Tom 860 459 7000 Location: Torringtonits NOT ok to contact this poster with services or other commercial interests

i have 4 almost brand new 31 inch fedral couragnia m/ts they are 265/75/r16 they still have the marker lines in the tread lines they aremounted on dodge 5 lug black rims need gone asap Location: torringtonits NOT ok to contact this poster with services or other commercial interests

I have 4 Thule Feet to mount to the top of a car.. It looks like the gutter mount on their website http://www.thuleracks.com/product.asp?dept_id=3&sku=368 but I am using a similar set on the factory rails of my wifes car. 2 have lock cylinders but no keys and 2 have no cylinders. Thule sells these separately if you buy them new for $150.00 / set. I am selling the set of 4 @ $40.00. Take a look at the pictures - one shows them mounted to my wifes car. Location: Litchfieldits NOT ok to contact this poster with services or other commercial interests

Car Top Cargo / Luggage Carrier - $100 (Litchfield)I have a Car Top Cargo / Luggage Carrier that attaches to the cross bars on a roof rack - Keeps things off the roof of the car. $100.00 Location: Litchfieldits NOT ok to contact this poster with services or other commercial interests

2 diamond plate tool oxes for the sides of truck Location: terryvilleits NOT ok to contact this poster with services or other commercial interests

pair \"74\" 6-lug axles, rear is a 12 bolt, front is a dana 44, $200, np-203 transfercases for th-350 trannys, one has tranny with it $125, one with out $75, 4-\"15x\"10 chrome wagon wheels for 6-lug chevy $75, 84 GMC pickup, 1/2 ton, runs and drives needs work $200, truck has optoinal hyd dump flat bed on it, $500 for combo, will not sell flatbed sperate, STUFF HAS TO GO, CALL 203-232-0323 Location: bristolits NOT ok to contact this poster with services or other commercial interests

1995 GMC Topkick PARTS this has an automatic Allison transmission and an eaton rear axle. The truck was a 23,700 gross weight truck. The following parts that are clean off this truck are Doors = $150.00 for each..... Cab = 400.00 Transmission = 500.00.... Seat = 75.00 Steering column with key = 75.00.... Nose = 200.00 Any questions please call Alberts Used Auto Parts at 860-283-0760 Monday thru friday between 9:00 and 5:00 and on Saturdays between 9:00 and 1:00. Location: Thomaston, CTits NOT ok to contact this poster with services or other commercial interests

belltech 4225 2inch drop springs chassis tech 2inch drop knuckles 3 inch drop leafs and Im not sure what the blocks are only thing you will need is new u bolts its like new only seen the road once or twice 250 obo Location: torringtonits NOT ok to contact this poster with services or other commercial interests

1997 to 2006 jeep wrangler its came out of 2000 jeep wrangler color taninterested please call 203-788-3181 Location: danbury CTits NOT ok to contact this poster with services or other commercial interests

I HAVE HERE 4 TIRES VERY LOW MILES ON THEM ,(SOLD THE CAR) THEY ARE 225-45Z-R17 THEY ARE ROTATION SPORT LOW PROFILE TIRES , THEY ARE IN GOOD SHAPE STILL LOOK NEW, HAD THEM ON FOR ONLY 2 MONTHS (I WILL NOT LOWER THE PRICE)CONTACT JEFF 203-228-6814 Location: WATERTOWN,CTits NOT ok to contact this poster with services or other commercial interests

PARTS for a 1976 Thunderbird Doors, tail lights, hood, Etc. Email for prices. or parts you might be intrested in. Location: thomaston, ctits NOT ok to contact this poster with services or other commercial interests

i have a set of 4 16inch zq8 rims with tires Location: torringtonits NOT ok to contact this poster with services or other commercial interests

Supercharger (62 cubic inch per rotation). Max RPM = 1600-1700. The Magnuson/Eaton Model MP62, 4th Generation is a “State of the Art” supercharger, engineered for 2.0 to 4.0 liter port injected engines. It was designed as a compact, flexible supercharger for increased power with original equipment quietness and reliability without adversely affecting fuel economy. The MP62 has proven itself in a number of applications, and this latest version has taken this stamina and versatility to the next level with “S Port” technology and a built in bypass for unparalleled performance. BRP MP62-G4 1525 Supercharger, MP 306204, SKU 206987, DJ17588. List price of $3,695.00 (FFS/Flying Miata). Save a bundle. Brand new, never installed. Feel free to make me a reasonable offer. INCLUDED: Mazda 99 Miata cast aluminum one piece intake manifold, 75 mm throttle body,65 mm nose drive pulley, EGR mount, installation instructions.NOT Included: Shipping, engine management, belt, tensioner pulley, crank pulley, bracket, intake air plumbing, plumbing. All of these parts are specific to the needs of each user and each installation. Together they will cost less than $300 plus engine management. I no longer have the car I was going to install it into. If you have tried the Jackson Racing supercharger, you know it has a limited top end, limited enhancement. This one will provide outstanding starts like any good supercharger will, but also have the top end like a turbo due to its high volume capacity. If you want more power, for less cash, this is the answer.This will deliver 250 HP! (with a conservative installation) in a stock Miata. With even greater upside potential in a modified Miata. Approximately 3 hours to install. Typical Dyno results (for ultra conservative installation):MP62 ColdsideJR 4-2-1 headerStock kit pulley (80mm)Fuel modifications only (base timing + 2 degrees advance across the board – very conservative). Typical Boost @RPMBoost at tip in ~5 psiBoost at 3000 rpm ~ 7 psiBoost at 3500 rpm ~8 psiMax boost ~ 15 psi @ 7600 rpm(capable of 25-30 psi)Typical RPM / Torque / HP3000 / 174.16 / 99.683500 / 183.55 / 123.417500 / 179.37 / 255.98Typical Drag Times http://www.dragtimes.com/Mazda-Miata-MX5-Timeslip-4472.html 1/4 Mile ET: 13.8871/4 Mile MPH: 100.6201/8 Mile ET: 8.9421/8 Mile MPH: 77.3500-60 Foot ET: 2.031User comment: \"BRP MP62 Coldside Supercharger kit. Supercharger mounted on custom intake manifold mounted on intake side of engine. This kit is a non-intercooled system with low throttled volume and includes a 75mm throttle body. Emissions legal with CARB certification pending. Once installed, only 18 lb. of added weight to the car. This kit requires you to remove the intake manifold and install their custom manifold. Install was straightforward and didn’t pose any issues other than two of the lower intake manifold bolts being hard to reach. I had the first home install. Now BRP includes a crowfoot instead of a wobble socket to make those bolts easier to fasten. I removed the old parts in 2.5 hours and installed the kit in 3.5 hours (I did many extras, such as rerouting wiring and cleanup). Once all was installed, the car fired right up. The kit has great throttle response. I later added a boost gauge. The car idles perfectly and has no cold startup issues. When driving around town and cruising, the car drives and sounds like stock, but when you step on the throttle the blower whine will make its presence known. :) Quality product, smooth power with instant throttle response, hassle-free OEM-like drivability, excellent customer service.\" Location: West Redding, CTits NOT ok to contact this poster with services or other commercial interests

Chevy 305 EngineWith 350 TransmitionNew CamAsking 250.00(772)201-0268 or (860)567-8576 Location: MORRIS, CTits NOT ok to contact this poster with services or other commercial interests

4- 17\" ASA AR1, BBS REPLICA RIMS (AMERICAN RACING)4- 17\" 215-40-17 PURELLI PZERO NERO TIRESTIRES ARE MOUNTED ON RIMS, 2 TIRES SLIGHTLY MORE WORN THAN THE OTHER TWO.ORIGINAL PURCHASE PRICE $1200.00 / ASKING $500.00SERIOUS INQUIRIES ONLY! NO OUT OF STATE BUYERS! ABSOLUTELY NO SCAMS!SCAMS WILL BE REPORTED TO THE AUTHORITIES AND PROSECUTED!!CALL 860-307-3960 WITH ANY QUESTIONS.

PONTIAC FIREBIRD 85-2001 / PONTIAC MOST MODELS 1992-2001 /PONT OLDS BUICK 1997-1998 GRAND AM ACHIEVA SKYLARK BONNEVILLE REGENCY LESABRE CAVALIER SUNFIRE / CAMERO 1995-2001 / 1996 IMPALLA SS CAPRICE ROADMASTER / 1997 CHEVY VENTURE PONT TRANSPORT OLD SILHOUETTE / NO TRUCK /SOME VINTAGE 60`S 70`S E MAIL REQUEST / 85-86-87 PONTIAC FIERO / 88 6000STE AWD / 1989 T/A 20tH ANNIVERARY SUPPLEMENT MANUAL /

Brand new still in box....... all the bells and whistles..... it is just taking up room in my place.... the first $250.00 takes it away...what a deal....

Ford 2005 F250 or F350 8 Lug factory Rims and tires 8 Lug,Tires are LT265/70/17 comes with Caps and Lugs All in excellent Cond. $590.00 OBO please call 203-744-7511

Waag Grille Guard Flat black with two round hologen lights. Fits small to mid size 4X4 truck.67 inches total width --Center Mounts 28inches --32 inches high$150.00 Call 860-689-3443

It came off of an 86 Ford Full Size Truck.Excellent condition.Please call 860-307-0054.$550.00 o.b.o.

95-99 eclipse fwd turbo tranmission custom painted

brand new t3/t4 turbo xs header and 14psi wastegate 860-201-5936

I have two catalyic converters thay were on my car for two week before it broke down thay were taken off this is for a 2000 Hyundai Sonata you can contact me at curtis88c@hotmail.com

94 F250 4X4 5.8L RIGHT AND LEFT VGD 860-582-0016 LV-MSG

EXC COND DOES HAVE SOME PAINT AND OXIDATION ON THE OUTSIDE 860-582-0016 LV-MSG

97 CROWN VICTORIA/GRAND MARQUIS EXC COND $25 860-582-0016 LV-MSG

Four steel rims with snows and wheel covers. Snows are very worn (8 winters) and one is blown. Rims are 14 inch and were on a Honda Civic.

20\" TSW Wheels and Nitto NT555 tires 245/35 ZR20...wheels and tires like new only used for two summers no scuff, scratches nothing!!! 5x114 40mm bolt pattern will fit some hondas acuras eclipses luxus ect..check tsw.com to make sure! Must sell just traded in my car please call 860-944-8384 $1200.00 obo serious inquires only!!

This like new heavy duty brush guard came off my 98 explorer its only a coupple years old no rust all the parts and hardware $200 OBO 860-485-4637

215/75/15 FIRESTONE WINTERFIRE