Unique Rounded Lid Design Self-Adusting Gear-Lock Dual Rotary Locking System and Self-Aligning Latch Pins Help Maintain a Tight-Fitting Lid 3-Layer RSL Lid High-Strength Body Design Heavy-Duty Gas Spring Guards Built in Storage on Both Ends Call 632-2057 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Heres a link with info ( http://www.thepropaneshop.com/onlinestore/detail.cfm?ID=8061S&storeid=1 ) $60. Call 243-0480 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Call Mel or Colleen 632-5759 or 349-5051 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Call Colleen or Mel at 349-5051 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

This Makita finishing sander is used but in good working condition. It is a model BO4550 and features include: 1.6 amp motor at 14,000 OPM for smooth finish, only 2.1 lbs, Dust Bag, durable all ball bearing construction, sands flush on three sides. Call at 346-2249. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Two (2) aluminum blocks rated at 2500#. $55 each or both for $100. Normally these sell for $125-150 each.Each is a different brand but similar in construction. One is a Sherman & Reilly model XS100B; both are rated at 2500# each.223-3174. Cash only, no checks. Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Metal vintage tool or tackle box with fold out compartments.Solid durable box has withstood the test of time.$20. 223-3174Keywords: tool tools tackle fishing toolbox Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Cable puller, Crescent brand, model #385 pulls 3/8\" to 3/4\". $35Cable cutter, Morse Starrett impact type. $35.Both tools for $60. Cash only, no checks.223-3174. Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Ridgid heavy duty commercial pipe cutter model No. 1-2 (2A) in excellent near new condition. AMERICAN MADECuts pipe from 1/8\"-2\"The RIDGID 1-2 (2-A) Heavy-Duty Pipe Cutter cuts 1/8 inch to 2 inch pipe. • Fast, clean pipe cutting by hand or power • Extra-long shank protects adjustment threads • Extra-large handle is provided for quick, easy adjustment • Can be converted to 3-wheel cutter by replacing rollers with cutter wheel$150 new at AIH. $75 cash, no checks. 223-3174 Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Ridgid 24\" pipe wrench. Two available at $35 each or both wrenches for $60. AMERICAN MADE.Wrenches are in very good condition.$68 each new. $35 each cash only, no checks. If you are interested in either or both of these, please email me with a local contact number and I will contact you soon. I check my email frequently. Thank you.Keywords: plumbing plumbers pipefitter pipefitters pipefitting plumber pipes Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

500 lb. Hydroulic Lift Table , 17in. X 28in.Call Mike 229-7945 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Snap-on 12 volt starting and charging system tester, includes rolling cart, and a Centrey 40 amp charger with 200amp engine startCall Mike 229-7945 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

This is a great 225 Arc welder that includes over $150 in welding rods alone. Has seen little use and as I dont weld anymore, it can take up space in someone elses garage. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Aluminum grain shovel in excellent condition. Perfect edge (see picture)$10 cash, no checks. 223-3174 Location: South Anchorage-Dimondits NOT ok to contact this poster with services or other commercial interests

Cable puller, Crescent brand, model #385 pulls 3/8\" to 3/4\". $35Cable cutter, Morse Starrett impact type. $35.Both tools for $60. Cash only, no checks.223-3174. Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Metal vintage tool or tackle box with fold out compartments.Solid durable box has stood the test of time.$20. 223-3174 Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Brand new Ridgid 10 inch 36 tooth carbide blade.$15 cash, no checks.223-3174 Location: South Anchorage-Dimondits NOT ok to contact this poster with services or other commercial interests

Two (2) aluminum blocks rated at 2500#. $55 each or both for $100.Each is a different brand (one is model XS100B) but both are rated at 2500# each.223-3174. Cash only, no checks. Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Ridgid heavy duty commercial pipe cutter model No. 1-2 (2A) in excellent near new condition.Cuts tubing from 1/8\"-2\"The RIDGID 1-2 (2-A) Heavy-Duty Pipe Cutter cuts 1/8 inch to 2 inch pipe. It is used for fast, clean pipe cutting by hand or power. The extra-long shank protects adjustment threads, while an extra-large handle is provided for quick, easy adjustment. • Fast, clean pipe cutting by hand or power • Extra-long shank protects adjustment threads • Extra-large handle is provided for quick, easy adjustment • Can be converted to 3-wheel cutter by replacing rollers with cutter wheel$150 new at AIH. $80 cash, no checks. 223-3174 Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Ridgid 24\" pipe wrench. Two available at $35 each. US made.$68 each new.223-3174. $35 each cash only, no checks. Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Metal double locking gun cabnet or safe. 5 feet tall corner unit. shelves on inside and door. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Porter Cable Drill 1/2 inch Like new condition. Call John 345-0993 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Craftsman stock no. 9444431/2\" drive reversable ratchet in caseRange 10 - 150 ft/lbs or metric 203 - 2101 n.mCall John 345-2833 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Proto 3/8 in drive Crows foot wrench set sizes 3/8 through 3/4. Lifetime Warranty $25 345-2428 DaveI will remove this ad when the wrenches are sold. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Sears Craftsman hollow chisel mortiser with several mortising bits, bit holder, etc. New never used; was $279 new.Handle pictured can be put on either side.Model # 152.219070$140 cash, no checks. 223-3174**PLEASE NOTE** LOCAL SALES ONLY, CASH AND CARRY ONLY, NO CHECKS, NO EXCEPTIONS. Thank you! Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

2.5 ton extra high lift jack that is probably 10 years old but it has had relatively little use and is in very good shape. Lift range is listed as 6-21\". This model has a higher lift than similar sized jacks I believe. It was oriented toward SUVs with larger tires that need some extra lift range. Call Paul at 345-6079 or 541-778-1753. Thanks. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Roofing Nailer Senco SCN40R used for 3 houses, hammer stapler with staples, 2 boxes nails each 3/4 full, stripper shovel, flashing and 8 in. vent $ 350.00 OBOcall 346-1854 or 242-2086 if interested. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Nice Larin 4000 lb capacity jack and case. Only used a couple times - looks and works great! Call 441-6079 between noon and 9pm. CASH/Local pick-up only. Thanks for looking! Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Coffing 2 ton chain hoist - used, but in great condition... always kept indoors. Put on an extension for the pull chain to allow it to work from a 14 ft high beam, so high ceilings are no problem. The lift chain is about 10 or 12 feet long. Call 441-6079 between 10am and 10pm. $80 CASH/Local pick-up only. Thanks for looking! Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Last chance to get this very nice, clean, Matco ProFormance series box in - looks great! This box features huge pneumatic casters and an extra storage drawer mounted to the bottom. Still looks new and, at $1800, is a great deal... beats paying well over $3000 for a new one! Original solid casters included. Going into storage if it doesnt sell today. Call Tim @ 441-6079 between 10am and 9pm. $1800 CASH/Local pick-up only. Thanks for looking! Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Sears Craftsman hollow chisel mortiser with several mortising bits, bit holder, etc. New never used; was $279 new.Handle pictured can be put on either side.Model # 152.219070$150 firm. 223-3174**PLEASE NOTE** LOCAL SALES ONLY, CASH AND CARRY ONLY, NO CHECKS, NO EXCEPTIONS. Thank you! Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Very nice, clean, Matco ProFormance series box in Cadmium Yellow - looks great! This box features huge pneumatic casters and an extra storage drawer mounted to the bottom. Still looks new and, at $1900, is a great deal... beats paying well over $3000 for a new one! Original solid casters included. Must sell this weekend. Call Tim @ 441-6079 between 10am and 9pm. $1900 CASH/Local pick-up only. Thanks for looking! Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Awesome organizing system for any wall, 4 panels that can be configured any way you want. Put them all across in horizontal line, or stack them to be vertical. All the hooks and baskets included, can also be moved to any way. Good condition. Come and get it, youll have it up in no time. $50.00 258-7910 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

7 HP 240 Volt 10.3 CFM @ 90 PSI. Very new. Made in the USA by Campbell Hausfeld. Comes with a water separator.Call (907) 230 2527 24/7. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Sears Craftsman hollow chisel mortiser with several mortising bits, bit holder, etc. New never used; was $279 new.Handle pictured can be put on either side.Model # 152.219070$150 firm. 223-3174**PLEASE NOTE** LOCAL SALES ONLY, CASH AND CARRY ONLY, NO CHECKS, NO EXCEPTIONS. Thank you! Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Sears Craftsman hollow chisel mortiser with attachments etc. Brand new out of the box.New never used; bought for wood shop but just dont use so selling it. $279 new.Handle pictured can be put on either side.Model # 152.219070$150 firm. 223-3174**PLEASE NOTE** LOCAL SALES ONLY, CASH AND CARRY ONLY, NO CHECKS, NO EXCEPTIONS. Thank you! Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Sears Craftsman toolbox for sale. Compact design; great starter box or for someone that has limited space for tools but still wants to have them organized.Also great for a side box for fasteners, parts etc. Six (6) drawers plus lower storage area for larger items. On casters so you can roll it anywhere.All drawers etc are lined with brand new indoor outdoor carpet which can be used carpet side up or rubber side up to keep tools from slipping.This box is a bit lighter guage than the standard two piece boxes. Drawer liners are brand new and appear curled in picture due to being cut from roll; flat in box now.DIMENSIONS: 40\" H X 22\" W x 12\" D$75 cash. 223-3174**PLEASE NOTE** LOCAL SALES ONLY, CASH AND CARRY ONLY, NO CHECKS, NO EXCEPTIONS. Thank you!Search keywords: Craftsman Sears Toolbox tool chest tool box Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Heavy duty welders cart. Some rust, but still very strong. Location: south anchorageits NOT ok to contact this poster with services or other commercial interests

Laser Alignment, Inc. Beam Aligner 4700. Instrument for leveling pipe in a trench. Set the grade and it will show when its right. Also has a blower. Like new condition. Call 360-3389. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

This is the cadillac of scroll saws. Hegner Multimax 2, Complete w/ stand. New cost is over $1200.00. Used very little and is in new condition. Call 229-2398 for more info Location: south anchorageits NOT ok to contact this poster with services or other commercial interests

Skil 1/2\" Drill. $20.00 cash only, will not ship.Call 345-2381 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Makita Drywall Drill. Excellent condition. $30.00 cash only, will not ship.Call 345-2381 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Selling a Craftsman automotive buffer/polisher system, 11 inch. The unit comes with its original box, user manual and two bonnetts. It is in good working order. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests