Craftman table saw, works great. 745-7313 Location: Palmerits NOT ok to contact this poster with services or other commercial interests

i have 2 echo chainsaws new in the box never used paid 399 will sell for 200 each or both for 350also i have a milwalkee sawsall new in the box i paid 229 will sell for 125 or all 3 saws for425 call 907 745 1573 ricky the saws are 18in bars Location: palmerits NOT ok to contact this poster with services or other commercial interests

Nice box with new lock. Call Brian 907-376-0527 or 907-982-7852 Location: PW+Trunk area Palmerits NOT ok to contact this poster with services or other commercial interests

Great saw, great price. Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Delta 10\" table saw, Model 36-600.Works perfectly - used it today!Its the standard for 10\" saws.The bottom line: A star among the lower mid range ($400-$600) for table saws.Reliable, durable, and a good value.22-1/4 x 20-1/2 large cast iron table with two 9\" extension wingsTotal dimensions: 37\" high, 22.5\" wide, 46\" longPowerful belt driven, 1 HP Motor, 15 amp, 120 volt, 60 HZ, enclosed inside the cabinet to save spaceSee through blade guard with splitter and anti-kickback fingers for safety** Google DELTA SAW 10 36-600 for more info (Amazon/ePinions write up) ** Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Snap On Limited Edition 426 Hemi Mopar Muscle car tool box. Double bank top chest and roll away and a stainless top on the roll away. NO STICKERS!!!! excellent condition.$4,000 O.B.O, cash, check, credit card through PayPal.CALL me at (907) 775-2654 cell, (907) 746-3805 Home or respond to the link. Location: Palmer, AKits NOT ok to contact this poster with services or other commercial interests

Delta Band saw like new........used only a few times. Location: Palmerits NOT ok to contact this poster with services or other commercial interests

20 ft wire rope sling - eye to eye - 1 inch diameter - basket hitch rated at 20 tons. $200/OBO. Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Craftsman air compressor.30 gal tank, 3.5 hp motor 6.8 cfm at 90psi.I rebuilt the pump this past fall with a new piston/rod, sleeve and head gasket/o ring. About $40 in parts just right there. Has a new pressure regulator with gauge and also new tank pressure gauge as well.The tank used to be red with a big Craftsman logo, but someone spilled some paint on it so I re-painted the tank.Works great, just upgraded to something bigger and have no use for this one. Location: Palmerits NOT ok to contact this poster with services or other commercial interests

10\" saw. Everything there and comes with stand. Nothing wrong with it, just taking up space. Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Honda E4500 Generator. Good condition and ready to go. $450 OBO 907-355-6813 Location: Palmerits NOT ok to contact this poster with services or other commercial interests

This unit is a couple years old but has less then 100 hours on it. I used it at a warehouse I was renting that had no electricity. For the most part it was only used when I went over there after dark which wasnt all that often. This unit was purchased from and costs $2700 locally at AIH, asking only $1700!! •Features: •DEWALT 389cc (13hp) OHV engine provides worksite reliability •20% more starting watts than generators in its class •Proper 120v and 240v outlets for jobsite applications •Worksite tested frame with panel protection bars for increased durability •Super quiet muffler reduces engine noise •Idle control saves fuel and reduces noise •Low oil shut-off protects engine •Specifications: •Max AC Output 7000 watts •Rated AC Output 6550 watts •Max Current (120V/240V) 60/30 amps •Alternator Type Brushless •Rated Current (120V/240V) 55/27 amps •Fuel Tank Capacity 4.8 gal •Engine Type DEWALT 389cc (13hp) •120 Volt GFCI Receptacles (20 Amp) 4 •120 Volt GFCI Twist Locking Receptacle (20 Amp) 0 •120 Volt Twist Locking Receptacle (30 Amp) 2 •120V/240V Twist Locking Receptacle (20 Amp) 0 •120V/240V Twist Locking Receptacle (30 Amp) 1 •Decibel, idle up (calculated 7 yards from unit) 72 dBA •Run-Time [ @ 50% Maximum Output ] 8.2 hrs •Tool Length 28 \" •Tool Width 22 \" •Tool Height 22 \" •Dry Weight 246 lbs •Starting System Battery start / recoil •Wheel kit (installed) •Handle kit (installed)•Lifting hook Location: Palmerits NOT ok to contact this poster with services or other commercial interests

nice tool box for truck Location: Palmerits NOT ok to contact this poster with services or other commercial interests

1960 International Dump Truck.Purrs like a kitten.Dump bed works great.Brakes need bled.23,000 original miles!232-6739 Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Porta-Cable drywall sander used very little. $150.00 441-8353 Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Snapper steelhead hardy plank shears used on one job. $100.00 441-8353 Location: Palmerits NOT ok to contact this poster with services or other commercial interests

20 ft wire rope sling - eye to eye - 1 inch diameter with a basket hitch rated at 20 tons. $350/OBO. Please call 841-5939 or email with any questions etc. No trades, please. Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Excel Pressure Washer 2300 PSI, needs hose, has gun. Asking $100. Respond to this ad or call 907-746-2489SALE PENDING Location: Palmerits NOT ok to contact this poster with services or other commercial interests

1960 international dump truck Location: Palmerits NOT ok to contact this poster with services or other commercial interests

nice tool box for truck Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Wakesha engine with water pump I have two . Your choice. 907-841-4247 Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Model 4830 48\"X30\"X30\". Not a beat up jobsite piece of junk. Has been indoors in my shop since new. Cost $690 @ AIH and the wheels are another $100. Exc. cond. Please call 907 355-5152. Location: PALMERits NOT ok to contact this poster with services or other commercial interests

For sale $50.00Black and Decker Cordless setCordless circular saw and drill 15.6 voltHard travel case full of areas for storage of drill bits and saw bladesTwo battery packsOne charger – charger needs to be replaced costs $15.00 + ship/hand from company Contact Jeanna at 907 745 2058 leave a message Location: palmer alaskaits NOT ok to contact this poster with services or other commercial interests

1-1/2HP motor and exclusive double-drive power system, Jets 10\" Workshop Saw transfers more power to the arbor than conventional belt-drive systems. Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Snap on tool box for sale semi used only 2 years old been sitting in storage , I paid $ 4500 for it This box is in great condition you may not find a better price than what im willing to sell it for ! it’s a SNAP ON tool chest not some cheap brand !!!! look it up on www.snapon.com its a KRA2411 Location: Palmer Ak its NOT ok to contact this poster with services or other commercial interests