This canopy fits a compact pick up 5 ft wide X 6 ft long. 2 compartments on each side plus door in back. Very good condition.907-696-0892 Location: Eagle Riverits NOT ok to contact this poster with services or other commercial interests

MTD Yard Machine 25 Ton Log Splitter. 2.5 years old. Mint condition, starts great, runs great, does a great job. $900. 354-2333 Lee AnneLink to site about machine below:http://www.yardmachines.com/webapp/wcs/stores/servlet/product_10451_18503_102003_36249_-1 Location: Wasillaits NOT ok to contact this poster with services or other commercial interests

Craftsman 10\" Stationary Table Saw..excellent condition with manual, ripping guide and miter guide. Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Boxes measure 60 inches tall, 40 inches wide and 20 inches deep. Have keys for top and bottom. Top box is 1 year old. The bottom box is about 10 years old. They are in pretty much perfect condition ! Need to sell now ! First $1250.00 gets them. These would cost you $4000.00 off the Snap-on truck. Tools are not included. Contact me directly. ssalaska33@yahoo.com Location: Delta Junctionits NOT ok to contact this poster with services or other commercial interests

Two snap-on boxes. One is a cart with 5 slideouts it is red and has a side try. The other is a full size box with 13 slide out draws and is blue. Mod. # KRA5213DPCM. Asking 2000.00 for both or will split. Call for more info. 1(907) 350-6904 no e-mails Location: wasilla/anchorageits NOT ok to contact this poster with services or other commercial interests

Scaffold, 2\"x12\"x12 with metal end pieces with 8 or less (adjustable) 2x4\" legs $55.00 333-7064 calls only please Location: EAST ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

TABLE SAW HOME BUILT FROM 2 1/2 HP 220 VOLT 12: SKILL SAW. CRUDE BUT EFFECTIVE. ALL THE POWER YOU NEED. $35.00 333-7064 CALLS ONLY PLEASE Location: EAST ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

GENERATOR NATURAL GAS OR GASOLINE POWERED 8 HP BRIGGS & STRATTON 2500 WATTS 110 VOLTS AC 70# NEW $195. 333-7064 CALLS ONLY PLEASE Location: EAST ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

Hunter alignment full hight lift control tower Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Spanco Fixed Height Steel Gantry CraneCrane: 2 ton, 14 ft wide by 14ft highHoist: Made in USA, Harrington, 2 ton, 16th fallVery slow!Asking $4000 OBOWould consider selling separate Hoist and Crane...Crane: $1800Hoist: $2500 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Alignment rack air assisting hydraulic lifts for each end Location: S. Anchorageits NOT ok to contact this poster with services or other commercial interests

Big cutting torch setgauges, cutting head, welding head, striker, and hose.No bottles.Asking $300 OBOCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Snap-On Air Drill, ReversibleNew condition, 1/2\" chuck, in the box$250 FirmCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Snap-On puller setalmost everything on the board in the back of the Snap-On truck, plus extras!$750 FirmCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

4 floor jacks, on wheels, up to 3 1/2 ton capacity Location: s. Anchorageits NOT ok to contact this poster with services or other commercial interests

12 Volt electric winch, 3/16” cable, 1500lbs rated straight pull. New in box. Includes cable and wiring. Good condition. 632-5536 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Drill stand for any 3/8-inch electric or cordless drill. Made by Sears. Adjustable for most any drill. Good condition. 632-5536 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Lincoln 250 Ideal ARC AC-DC Welder with 50 leads and Air ARC whip.Box of 7018 and 2 boxes of air arc rod. Have wove lead and couplers and ends. Over $1200 worth of just the lead cables!For eveything: Asking $1300 OBOCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Snap-on Battery & Charging System Tester - New condition!!!New $900.00Asking $500 OBOCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Asking $25, 727-2274, all new, w/instructions, in box Location: spenardits NOT ok to contact this poster with services or other commercial interests

I have a 5 ton hoist that I need to get rid of. It works great, has 26 feet of line. It runs on a track and it is electric. Its a Three Stage hoist. I am open to trades as well. Please email or call 715-8626 if you are interested or have any questions. Location: Wasillaits NOT ok to contact this poster with services or other commercial interests

Craftman table saw, works great. 745-7313 Location: Palmerits NOT ok to contact this poster with services or other commercial interests

Nederman Extractor Kit 500 Fume Extractor***FOR SPOT SUCTION OF SOLDERING FUMES AND GASES******NOT SUITABLE FOR WELDING***This is a compact filtrt solution with a very low sound level. The filter captures the noxious fumes and gases that normally occut when soldering, gluing and working with solvents. The filter is disposable and is easily changed. The arm is over three feet and is easily mounted without tools on to the workbench. It is flexible in all directions. Technical Data:Voltage: 120VPower: 80WSoundlevel: 43 dB(A)Filter Efficiency DOP: 99.97%Weight: 19lbsHeight: 10 inchesDiameter: 10 inchesFor more information please call Airgas @ 907-563-6644 or stop by and visit us at 6350 Arctic Blvd on the corner of Arctic and Arctic Spur. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Millermatic 212 Wire Feed Welder - Capable of welding both steel & aluminum. Mig or Flux Cored Capable CV, DC, Single Phase 200(208)/230V 30-210 Amp Range Rated Output 160A at 24.5 VDC, 60% Duty Cycle Comes Complete With: 15ft 250 Amp M-25 gun 10ft work cable with clamp Regulator with hose .030/.035 in reversible dual groove drive rolls Extra contact tips Set-up & operation CD Optional spool gun available for purchase. Call for more details. For more information call Airgas @ 563-6644 or visit us in Anchorage at 6350 Arctic Blvd on the corner of Arctic and Arctic Spur. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Workes great just clearing stuff out to get ready for a move. Call Devin or Laurie at 337-7255 or 208-880-7279 for more info. Location: Hillside - Anchorageits NOT ok to contact this poster with services or other commercial interests

This only has 20 hours on it, and I bought it brand new for just under $3000. Includes all accessories, booklets, etc. Excellent condition. Call Devin or Laurie at 337-7255 or 208-880-7279 for more info. Location: Hillside - Anchorageits NOT ok to contact this poster with services or other commercial interests

BRAND NEW, EXCELLENT CONDITION!11HP CRAFTSMAN GENERATOR 6,000 WATT120/240 WATTS OUTLETSONLY USED 2-3 HOURSASKING $800 OR OBOEMAIL: ALASKAWILDCOUNTRY@HOTMAIL.COMMSG: (866) 758-1598 Location: ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

Lincoln Arc Welder - SP200Comes with Bottle & GagesCall Danny at Gueco Racing (907)841-2345 Location: Wasillaits NOT ok to contact this poster with services or other commercial interests

Lincoln 175 sp wire feed 220 volt, Miller 225 stick welder 220 volt plus stainless rolling cart with lots of accessories.632-1211 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

New rebuilt motor, electric start, new battery. 632-1211 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

24\" Rockford Shaper with 14\" vise. Excellent Condition.George 460-9473 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Monarch 24\" swing 78\" between centers with pattern tracer Lots of tooling. Nice machine!George 460-9473 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

ICI Professional Pro Spray Airless Sprayer. Needs rebuild, my maintenance man forgot the first part of his job description, maintenance. He is gone and now its time for this to go. I dont have the energy or the need for a machine like this anymore. Was left sitting with paint in the pump which now needs attention and cleaning. The only piece missing is the tip on the gun. Awesome value for the new landlord or up and coming handyman.Ill give full instruction. Call Paul and come pick it up! I hate to let it sit in the shop and take up space. 360-7831 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

20 Car hauler enclosed trailer. Set up for general contractor. Great shape $7250. ****Also have 24 Drive in drive out snowmachine trailer.Great shape tows easily $7500 Location: Fairbanks AK 99709its NOT ok to contact this poster with services or other commercial interests

I have two HEAVY DUTY SCREW JACKS for sale. I used them for leveling houses / mobile homes and lifting heavy things. Asking $200.00 O.B.O. MAKE ME AN OFFER, THEY HAVE TO GO. 333-9461 ask for BOB Location: ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

YOUR LOOKING A \"USED\" 161 JAM PROOF RIDGID THREADER IN VERY NICE CONDITION! THIS UNIT THREADS 4\"-6\" PIPE. IT CAN BE USED MANUALLY WITH A RATCHETING HANDLE (not included), OR CAN BE USED WITH A RIDGID, 300, 535, 700, OR 1822 POWER THREADERS WITH THE PROPER DRIVES. THIS UNIT \"NEW\" LISTS FOR $3,268.00! THE (Ridgid Style) OILER \"NEW\" LISTS FOR $247.00!! THATS A COMBINED TOTAL OF $3,515.00! SAVE $1800.00+ AND GET FREE SHIPPING IF YOU BUY IT HERE FOR $1,925.00! THE 161 MANUAL & BLOW UP/PARTS LIST IS ALSO INCLUDED AT NO CHARGE! THE PRICE LISTED INCLUDES PALLETIZING AND SHIPPING! IF YOU WANT TO PICK IT UP WE CAN GIVE YOU AN EVEN BETTER PRICE! WE HAVE OTHER RIDGID PIPE THREADERS (1224, 535, 300,700, 1822S) AVAILABLE AND GREENLEE CONDUIT BENDERS (555S, 855)AND ENERPAC CONDUIT BENDERS! YOU CAN REACH US AT 815-963-1234. THANKS! its NOT ok to contact this poster with services or other commercial interests

Hand cart, 50 inches tall, pneumatic tires, excellent condition. Great for moving those heavy items. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

this table is built for fine gold recovery they payed 25000 about 20 years ago then never used it $10000. or trade for ????? 907-227-2983 Location: big lakeits NOT ok to contact this poster with services or other commercial interests

18 volt DeWalt tools for sale. Hate to let them go but moving and cant take them with us. $300.00 for the set see pic.907-373-0331 Location: Wasillaits NOT ok to contact this poster with services or other commercial interests

bank owned repossessions usd 750.000 for the PAIR purchased from Hoss equipment is April of 200896V series , rebuilt engines and undercarriagescontact exclusive bank liquidation agent @ 310 927 3493 STEVE or Harry @ 936 336 0410 in Texass.passy@sbcglobal.netdealers and brokers are welcome , all offers will be submitted to secured party Location: houston texasits NOT ok to contact this poster with services or other commercial interests

i have 2 echo chainsaws new in the box never used paid 399 will sell for 200 each or both for 350also i have a milwalkee sawsall new in the box i paid 229 will sell for 125 or all 3 saws for425 call 907 745 1573 ricky the saws are 18in bars Location: palmerits NOT ok to contact this poster with services or other commercial interests

craftsman contractor jointer,,,,,,,,150.00,,,,,,,,,,,,,,,376-3719 Location: wasillaits NOT ok to contact this poster with services or other commercial interests

Full size Rockwell 10\" Contractors Table Saw on rolling coasters. Its in good condition and it works very well. I hate to part with it, but my wife says it needs to get out of my basement. $300 OBO. 978-6753 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Really nice delta drill press. Like new. Rarely used. First come, first served. Call Tim 242-8654 Thanks Location: S. Anch.its NOT ok to contact this poster with services or other commercial interests

4KW Onan generator Electric start,cord with outlet box. Runs great 376-2950 or 232-0189 Thanks Location: Wasillaits NOT ok to contact this poster with services or other commercial interests

Reply to: davidkrieger2001@gmail.comMODEL 775. Serial # 2000F01031800027. 4 CYL engine turbo diesel 105 HP, 4 speed transmission, power shift. Tires 15.5x25. Loader bucket 96\" Wide-2yd. Backhoe bucket 24\" wide. 4 wheel steer, 4 wheel drive, extend a hoe reaches 24, joystick controls,1,827 hours, heated/ac cab, perfect glass, lights, dig depth 176\", weight 21,000 LBS. More pictures/details available upon request.A Somali teenager arrives to face what are believed to be the first piracy charges in the U S in decades//video nytimes com/video/2009/04/21/business/economy/1194839686575/geithner-speaks-to-congress-on-economy htmlAbduhl Wali-i-Musi accused of hijacking the Maersk Alabama and taking its captain hostage was led into a federal building in New York on Monday night borderThe United Nations conference on racism can never have credibility if it is used to attack one country Location: Alaskaits NOT ok to contact this poster with services or other commercial interests

Dewalt Table Saw with removeable guard. bought used for $250asking $100.Must go by 6-30-2009907-250-1862 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

2 sawhorses. Free for the taking. Must go by 6-30-2009907-250-1862 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

I have too many cordless drills. Dewalt 9.6v with charger, case and a battery. Works great. Battery is in good shape. Bill 980-5259 Location: Wasillaits NOT ok to contact this poster with services or other commercial interests

For Sale: Rotozip Rebel with Zip Mate disc cutting attachment, 1/8\" & 1/4\" collets, Circle Cutter, Five 1/8\" Sabercut bits for wood , Two 3.5 inc masonary cut off disks, Three soft grinding disks, Three hard grinding disks, instruction manuals, carrying case, Depth guide and collet wrench. Some of these pieces are not included when you buy the kit from the store. Get it all in one place. Only $125! Please Email us @ jasonkristenandjodin@gmail.com for more info. Thank you Have a nice day! Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

DeWalt saw for sale $400.Radial miter 12\" saw slightly used. Please call 907-382-0718 Location: Soldotna, AKits NOT ok to contact this poster with services or other commercial interests

Tall Oil Drain Pan for Car LiftBishman 525I have 3 of them and I think they are new and never used. This ad is for one. You may by all three if you like. 1 for $30, 2 for $60, 3 for $90.Im not sure how expensive they are but Im pretty sure you cant beat $30 each Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

It has only 225 hours, a 25 work height and a 30\" x 6 platform, non marking tires, 500lb capacity, built in 110v charge so it could fit any outlett, beeper horn, hour meter, pot guards and much more.For Sale or lease $500 per month each. I have a total of 4 unit. Pls dont email, call 907-229-2053 Location: Anchits NOT ok to contact this poster with services or other commercial interests

Two (2) aluminum blocks rated at 2500#. $55 each or both for $100. Normally these sell for $125-150 each.Each is a different brand but similar in construction. One is a Sherman & Reilly model XS100B; both are rated at 2500# each.223-3174. Cash only, no checks. Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Metal vintage tool or tackle box with fold out compartments.Solid durable box has withstood the test of time.$20. 223-3174Keywords: tool tools tackle fishing toolbox Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Cable puller, Crescent brand, model #385 pulls 3/8\" to 3/4\". $35Cable cutter, Morse Starrett impact type. $35.Both tools for $60. Cash only, no checks.223-3174. Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

~ ALSO HAVE FOR SALE ~ (the contents of the storage shed if its going to get sold)PLANTS, GARDEN ARBOR, LAWN CHAIRS, WHIRLPOOL HEAVY DUTY WASHER&DRYER,Over-the-Stove MICROWAVE OVEN w/FAN,~ ANTIQUE/WOOD FURNITURE ~ BEAUTIFUL OAK HOOSIER CABINET w/ROLL TOP CUBBY & CHINA, DRYSCALE, CANISTERS, HAT BOXES, BENTWOOD w/pressed metal 1800s TRUNK, BEAUTIFUL BENTWOOD VANITY, DOVETAIL CEDAR 6 drawer CHEST~ MOVING OUT...ENTIRE HOUSEHOLD MUST GET SOLD THIS WEEK!! ~ ~ TONS OF GREAT STUFF.~ ALL MUST GO!!~ TOO MUCH TO LIST! (or to photograph, but Ill try...please see posts in Furniture, Barter, Garage Sales, Electronics,etc. for more views) ~ DRESSERS, DESKS, DISPLAY CABINETS & BOXES, BOOKSHELVES, STORAGE/ARMOIRE CABINET TABLES, CHAIRS, SIDEBOARD, KITCHEN CABINETRY, FRAMED MIRRORS, Beveled-edge MIRRORS, KITCHEN IMPLEMENTS, UTENSILS & APPLIANCES ENTERTAINMENT CENTER, 50\" BIG SCREEN TV w/replacement screen, 19\" TV, 13\" TV, LAMPS, DECOR, CLOTHING, SALON TOOLS, BEAUTY SUPPLIES, ODDS & ENDS, etc, etc..... ...AND TONS MORE THAT I CANT BEGIN TO LIST...SO PLEASE... ... DONT HESITATE TO CALL/MAKE AN OFFER ON ALL THAT YOU WANT!! CALL ME @884-7792 TO COME BY AND SEE ALL THAT IVE GOT...THEN MAKE ME AN OFFER! Thanks for recycling, restoring & reusing;) Location: Fiji-Manoogs Isle, Lake Otis/Dowling its NOT ok to contact this poster with services or other commercial interests PostingID: 1234966939 Location: S.Fiji-Manoogs Isle, Lake Otis/Dowlingits NOT ok to contact this poster with services or other commercial interests

Ridgid heavy duty commercial pipe cutter model No. 1-2 (2A) in excellent near new condition. AMERICAN MADECuts pipe from 1/8\"-2\"The RIDGID 1-2 (2-A) Heavy-Duty Pipe Cutter cuts 1/8 inch to 2 inch pipe. • Fast, clean pipe cutting by hand or power • Extra-long shank protects adjustment threads • Extra-large handle is provided for quick, easy adjustment • Can be converted to 3-wheel cutter by replacing rollers with cutter wheel$150 new at AIH. $75 cash, no checks. 223-3174 Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Rubbermaid Plastic Shed. Approx 3ft x 4ft x 6ft asking $65Must go by 6-30-2009907-250-1862 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Ridgid 24\" pipe wrench. Two available at $35 each or both wrenches for $60. AMERICAN MADE.Wrenches are in very good condition.$68 each new. $35 each cash only, no checks. If you are interested in either or both of these, please email me with a local contact number and I will contact you soon. I check my email frequently. Thank you.Keywords: plumbing plumbers pipefitter pipefitters pipefitting plumber pipes Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Nice tool set , has ratchets that you put the sockets into , missing a few small items , such as 1/4 inch sockets , pretty much complete , call 764-4260 Location: South Birchwoodits NOT ok to contact this poster with services or other commercial interests

everything you see in the pictures for one price , you get 3 toolboxes , tools , some good brand some made in Taiwan , lots of sockets and wrenches , also the box for storage goes too , call me at 764-4260 Location: South Birchwoodits NOT ok to contact this poster with services or other commercial interests

Shopsmith Mark V model 520 Pro Fence Table system and extras. Includes bandsaw, jointer, strip sander, belt sander, dust collector, biscuit joiner, crosscut table and casters for easy moving. Just pulled it from storage so a little disorganized but used very little. About $6000 in items for $1750. Local Phone: 854-5762 Location: Eagle Riverits NOT ok to contact this poster with services or other commercial interests

Bostitch (Stanley) m111fs hardwood flooring stapler for sale, $350. This is near new, only used for 500 SF of flooring. I just needed it for a few weeks to do the one job. It is in excellent condition. It retails at Lowes for $550. I am also including half of a box of 2\" staples with it as well (2000 staples), which is worth around $70 for a full box. It is an air pneumatic stapler that takes 1.5 or 2\" staples and includes a base plate for laminate flooring.See more info at http://www.lowes.com/lowes/lkn?action=productDetail&productId=91694-354-MIIIFS&lpage=none#Call 868.5111 or email for more information or to come look at it. Ask for Jason. Location: Huffman and Lake Otisits NOT ok to contact this poster with services or other commercial interests

CENTURY GL80 GASLESS WIRE FEED WELDER. Location: WASILLAits NOT ok to contact this poster with services or other commercial interests

Craftsman 10\" radial arm saw. Works great. Location: wasillaits NOT ok to contact this poster with services or other commercial interests

10 Ton Air Operated End Lift Hien-Werner model #HW93690 In Excellent shape. About 1-2 years old. Lightly used. I traded out other things I didnt need for it about 8 months ago and have not even used it. Just been sitting. Time to sell it and get it out of my way. I was told it was about a year old when I got it. Operates perfect. Arms extend out to 4 up about 8\". Tires are even still up. Rolls around great. Its heavy and about 5ft Tall. Will need an lift gate or something like that to load . I have an engine hoist that may do the trick...........can be checked out at Alpine Automotive just off Palmer Wasilla Highway at 4 corners. I checked on line to find them new priced at $2700.00 - $3600.00 This one is used but looks very new. $1500.00 o.b.o. Well talk!!!Give me a call if your interested 745-0808 or 746-0885 Ask For Steve Yep dropped it $300.00, I would like to liquidate some things and get my floor finished at the house! Location: Valleyits NOT ok to contact this poster with services or other commercial interests

Chain saw sharpener. Call 357-9303 or 841-2093. Location: Wasillaits NOT ok to contact this poster with services or other commercial interests

1 window scraper, 4 Phillips head screwdrivers, 1 flat head screw driver, needle nose pliers, wire cutters, wire strippers, crescent wrench, set of alan wrenches, small hammer with fiber glass handle, and one pair of tin snips. $10 all. Call 357-9303 or 841-2093 Location: Wasillaits NOT ok to contact this poster with services or other commercial interests

240 8488 Location: huffmanits NOT ok to contact this poster with services or other commercial interests

VERY NICE MANUAL MITER WITH TWO SAWS. THIS TOOL IS IN EXCELLENT CONDITON, BUT WERE MOVING. SEE US ASAP. Location: FAIRBANKSits NOT ok to contact this poster with services or other commercial interests

240-8488 Location: huffmanits NOT ok to contact this poster with services or other commercial interests

working older military motor generator welder, 3 phase I believe...208,220,400 as is . $150.00 315-0498its NOT ok to contact this poster with services or other commercial interests

1 hand tool box (red) with misc tools inside, I cant get one top latch to close - may just be me $30 If interested, please call 223-6426 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Works Great cuts wood or metal. Has speeed reducer for metal cuts Call 696-3329 Location: Eagle Riverits NOT ok to contact this poster with services or other commercial interests